0% found this document useful (0 votes)

5 views

BLINE

Uploaded by

Ceci Gonza

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

5 views

BLINE

Uploaded by

Ceci Gonza

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 112

Series 1 Steel - Straight Sections

Series 1 Steel

Eaton H-1 B-Line series Cable Tray Systems

Series 1 Steel - Accessories & Fittings

Series 1 Steel
How The Service Advisor Works
We know that your time is important! That’s why the color-coding system in this catalog is designed to help you
select products that fit your service needs. Products are marked to indicate the typical lead time for orders of 50
pieces or less.
Customer: How do I select my straight sections. covers, or fittings so that I get the quickest turnaround?
Service Advisor: Each part of our selection chart is shown in colors. If any section of a part number is a different
color, the part will typically ship with the longer lead time represented by the colors.
Green = Fastest shipped items
Black = Normal lead-time items
Red = Normally long lead-time items
Example: 156G 09 - 24 - 144 Part will have a long
lead time because of the
156G material.
Changing the part number from 156G to 156P will change the coding to black for all sections and reduce lead time.

B-Line series Cable Tray Systems H-2 Eaton

Series 1 Steel - Straight Sections

3" NEMA VE 1 Loading Depth

Actual Loading Depth = 3.077"

Straight Section Part Numbering

Prefix
Example: 148 P 09 - 24 - 144

Series Material Type Width Length

148 P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
Steel 06 = 6" rung spacing 09 = 9" ¡ 120 = 10 ft.
G = Hot Dip 09 = 9" rung spacing 12 = 12"
Galvanized 12 = 12" rung spacing 18 = 18" ¨Primary Length.
After Fabrication 24 = 24" ¡Secondary Length.
Steel
30 = 30"
Trough- 36 = 36" See page C-23 for
explanation of lengths.
6" thru 24" wide
04 = Vented Bottom
Rung
Spacing SB = Non-Ventilated Bottom

For
side rail
Overall Width & rung data,
(Width + 1/8”) see chart on
pages APP-6 & APP-7 See page APP-1 for additional rung options. *SB available for all widths.
Series 1 Steel

Ladder Type Ventilated Bottom Non-Ventilated

(Specify Rung Spacing)
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. The published
load safety factor is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection,
multiply a load by the deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable
tray being installed.

B-Line Series NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
SIde Rail Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
.875
NEMA: 12A, 8C 6 204* 0.0011 Area = 0.510 in2 1.8 304* 0.019 Area = 3.290 cm2
3.077 CSA: C1-3m 8 115 0.0036 Sx = 0.480 in3 2.4 171 0.061 Sx = 7.870 cm3
148 3.625
UL Cross-Sectional 10 73 0.0087 Ix = 0.890 in4 3.0 109 0.149 Ix = 37.04 cm4
18 gauge Area: 0.40 in2 12 51 0.0181 3.7 76 0.309
*When using 12" rung spacing load capacity is limited to 195 lbs/ft (290.16 kg/m) for 36" tray width. When cable trays are used in
continuous spans, the deflection of the cable tray is reduced by as much as 50%.
Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

Eaton H-3 B-Line series Cable Tray Systems

Series 1 Steel - Straight Sections

4" NEMA VE 1 Loading Depth

Actual Loading Depth = 3.628"

Straight Section Part Numbering

Prefix
Example: 156 P 09 - 24 - 144

Series Material Type Width Length

156 P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
Steel 06 = 6" rung spacing 09 = 9" ¡ 120 = 10 ft.
G = Hot Dip 09 = 9" rung spacing 12 = 12"
Galvanized 12 = 12" rung spacing 18 = 18" ¨Primary Length.
After Fabrication 24 = 24" ¡Secondary Length.
Steel
30 = 30"
Trough- 36 = 36" See page C-23 for
explanation of lengths.
6" thru 24" wide
04 = Vented Bottom
Rung
Spacing SB = Non-Ventilated Bottom

For
side rail
Overall Width & rung data,
(Width + 1/8”) see chart on
pages APP-6 & APP-7 See page APP-1 for additional rung options. *SB available for all widths.

Series 1 Steel
Ladder Type Ventilated Bottom Non-Ventilated
(Specify Rung Spacing)
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above the published loads. The published load safety factor
is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the
deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

B-Line Series NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
SIde Rail Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
.875
NEMA: 12B, 8C 6 304* 0.0007 Area = 0.690 in2 1.8 452* 0.011 Area = 4.390 cm2
3.628 CSA: C1-3m 8 171 0.0021 Sx = 0.724 in3 2.4 254 0.036 Sx = 11.860 cm3
156 4.188
UL Cross-Sectional 10 109 0.0051 Ix = 1.517 in4 3.0 163 0.087 Ix = 63.140 cm4
16 gauge Area: 0.40 in2 12 76 0.0011 3.7 113 0.181
*When using 12" rung spacing, load capacity is limited to 234 lbs/ft (348.192 kg/m) for 30" tray width and 195 lbs/ft (290.16
kg/m) for 36" tray width. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%.
Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-4 Eaton

Series 1 Steel - Straight Sections

5" NEMA VE 1 Loading Depth

Actual Loading Depth = 4.628"

Straight Section Part Numbering

Prefix
Example: 166 P 09 - 24 - 144

Series Material Type Width Length

166 P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
Steel 06 = 6" rung spacing 09 = 9" ¡ 120 = 10 ft.
G = Hot Dip 09 = 9" rung spacing 12 = 12"
Galvanized 12 = 12" rung spacing 18 = 18" ¨Primary Length.
After Fabrication 24 = 24" ¡Secondary Length.
Steel
30 = 30"
Trough- 36 = 36" See page C-23 for
explanation of lengths.
6" thru 24" wide
04 = Vented Bottom
Rung
Spacing SB = Non-Ventilated Bottom

For
side rail
Overall Width & rung data,
(Width + 1/8”) see chart on
pages APP-6 & APP-7 See page APP-1 for additional rung options. *SB available for all widths.
Series 1 Steel

Ladder Type Ventilated Bottom Non-Ventilated

(Specify Rung Spacing)

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. The published load safety factor is
1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the
deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

*When using 12" rung spacing, the load capacity is limited to 234 lbs/ft (348.192 kg/m) for 30" tray width and 195 lbs/ft (290.16 kg/m)
for 36" tray width. When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%.
Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-5 B-Line series Cable Tray Systems

Series 1 Steel - Straight Sections

6" NEMA VE 1 Loading Depth

Actual Loading Depth = 5.628"

Straight Section Part Numbering

Prefix
Example: 176 P 09 - 24 - 144

Series Material Type Width Length

176 P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
Steel 06 = 6" rung spacing 09 = 9" ¡ 120 = 10 ft.
G = Hot Dip 09 = 9" rung spacing 12 = 12"
Galvanized 12 = 12" rung spacing 18 = 18" ¨Primary Length.
After Fabrication 24 = 24" ¡Secondary Length.
Steel
30 = 30"
Trough- 36 = 36" See page C-23 for
explanation of lengths.
6" thru 24" wide
04 = Vented Bottom
Rung
Spacing SB = Non-Ventilated Bottom

For
side rail
Overall Width & rung data,
(Width + 1/8”) see chart on
pages APP-6 & APP-7 See page APP-1 for additional rung options. *SB available for all widths.

Series 1 Steel
Ladder Type Ventilated Bottom Non-Ventilated
(Specify Rung Spacing)
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. The published load safety factor is
1.5. To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the
deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

B-Line Series NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
SIde Rail Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
.750
NEMA: 12B, 8C 8 194 0.0008 Area = 0.890 in2 2.4 458* 0.014 Area = 5.740 cm2
5.628 CSA: 137 kg/m 3.7m 10 124 0.0020 Sx = 1.230 in3 3.0 258 0.035 Sx = 20.160 cm3
176 6.188
UL Cross-Sectional 12 86 0.0042 Ix = 3.800 in4 3.7 165 0.072 Ix = 158.200 cm4
16 gauge Area: 0.70 in2
When cable trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%.
Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-6 Eaton
Series 1 Steel - Accessories
Standard (L-Shaped) Splice Plates
• One pair including hardware provided with each section. Tray
(Expansion splice quantity subtracted) Series Catalog No.
• Furnished in pairs with hardware.
148 9(*)-4004
• Prepackaged in pairs in a plastic bag, with hardware.
• 4-hole pattern L-shaped splice plates. 156 9(*)-4005
• L-shaped lay-in design. 166 9(*)-4006
• (*) Insert ZN or G 176 9(*)-4007

Expansion (L-Shaped) Splice Plates

• Expansion plates allow for one inch expansion Tray
or contraction of the cable tray, or where expansion
Series Catalog No.
joints occur in the supporting structure.
• Bonding Jumpers are required on each side rail. 148 9(*)-4014
Order Separately. 156 9(*)-4015
• L-shaped lay-in design. 166 9(*)-4016
• Furnished in pairs with hardware.
176 9(*)-4017
• (*) Insert ZN or G

Universal Splice Plates

• Used to splice to existing cable tray systems. Tray
• Furnished in pairs with hardware. Series Catalog No.
• (*) Insert P or G 148 9(*)-2004-1/2
156 9(*)-2005-1/2
166 9(*)-2006-1/2
176 9(*)-2007-1/2

Step Down Splice Plates

• These splice plates are offered for connecting cable Tray
tray sections having side rails of different heights. Series Catalog No.
• Furnished in pairs with hardware.
156 to148 9(*)-8044
Series 1 Steel

• (*) Insert ZN or G
166 to 156 or 148 9(*)-8045
176 to 156 or 148 9(*)-8046
176 to 166 9(*)-8060

Vertical Adjustable Splice Plates

• These plates provide for changes in elevation Tray
that do not conform to standard vertical fittings. Series Catalog No.
• Bonding jumpers not required.
148 9(*)-7024
• Furnished in pairs with hardware.
• (*) Insert ZN or G 156 9(**)-8024
• (**) Insert P or G 166 9(**)-8025
Requires supports within 176 9(**)-8026
24” on both sides, per NEMA VE 2.

Horizontal Adjustable Splice Plates 9()-803(X)-12 or 9()-803(X)-36

One pair splice plates with extensions.
• Offered to adjust a cable tray run for changes L
in direction in a horizontal plane that do L Catalog Cable Tray Tray
not conform to standard horizontal fittings.
No. End Cut Width 'L'
• Furnished in pairs with hardware.
• Bonding jumpers not required. 9(*)-803(X) Mitered Thru 36" N/A
• (*) Insert ZN or G 9(*)-803(X)-12 Not mitered Thru 12" 16"
• (X) Insert 4 for series 148 or 156, 9(*)-803(X)-36 Not mitered Thru 36" 41"
5 for series 166, or 6 for series 176
9(*)-803(X) Requires supports within 24”
Splices only on both sides, per NEMA VE 2.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-7 B-Line series Cable Tray Systems

Series 1 Steel - Accessories
Branch Pivot Connectors
• Branch from existing cable tray runs at any point.
• Pivot to any required angle.
Tray
• UL Classified for grounding
(bonding jumpers are not required). Series Catalog No.
• Furnished in pairs with hardware. 156 to 148 9(*)-8244
• (*) Insert ZN or G 166 9(*)-8245
176 9(*)-8246

Offset Reducing Splice Plate

• This plate is used for joining cable trays having different Tray
widths. When used in pairs they form a straight reduction;
Series Catalog No.
when used singly with a standard splice plate they form
an offset reduction. 148 9(*)-8064-(‡)
• Furnished as one plate with hardware. 156 9(*)-8064-(‡)
• (‡) Insert reduction 166 9(*)-8065-(‡)
• (*) Insert P or G
176 9(*)-8066-(‡)

Tray to Box Splice Plates

• Used to attach the end of a cable tray Tray
run to a distribution box or control panel. Series Catalog No.
• Furnished in pairs with hardware.
• (*) Insert P or G 148 9(*)-8054
156 9(*)-8054
166 9(*)-8055
176 9(*)-8056

Frame Type Box Connector

• Designed to attach the end of a cable tray run to Tray
a distribution cabinet or control center to help Series Catalog No.
reinforce the box at the point of entry.
• Furnished with tray connection hardware. 148 9(*)-8074-(‡)

Series 1 Steel
• (‡) Insert tray width 156 9(*)-8074-(‡)
• (*) Insert ZN or G 166 9(*)-8075-(‡)
176 9(*)-8076-(‡)

Blind End
• This plate forms a closure for a dead end cable tray. Tray
• Furnished as one plate with hardware. Series Catalog No.
• (‡) Insert tray width 148 9(*)-8084-(‡)
• (*) Insert P or G 156 9(*)-8084-(‡)
166 9(*)-8085-(‡)
176 9(*)-8086-(‡)

Tray Hardware

Pre-Galvanized Tray Hardware Hot Dip Galvanized Tray Hardware

Catalog No. RNCB 3/8"-16 x 3/4" Znplt Catalog No. RNCB 3/8"-16 x 3/4" CZ Ribbed Neck
Ribbed Neck Carriage Bolt ASTM A307 Grade A Carriage Bolt Chromium Zinc ASTM F-1136-88

Catalog No. SFHN 3/8"-16 Znplt Catalog No. SFHN 3/8"-16 CZ Serrated Flange Hex Nut
Serrated Flange Hex Nut ASTM A563 Chromium Zinc ASTM F-1136-88
Grade A
Finish: Zinc Plated ASTM B633, SC1

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-8 Eaton

Series 1 Steel - Accessories
Conduit to Tray Adaptor Conduit Size
• For easy attachment of conduit in. (mm) Catalog No.
terminating at a cable tray. 1/2, 3/4 (15, 20) 9G-1159-1/2, 3/4
• Use on aluminum or steel cable trays. 1, 11/4 (25, 32) 9G-1159-1, 11/4
11/2, 2 (40, 50) 9G-1159-11/2, 2
21/2, 3 (65, 80) 9G-1159-21/2, 3
31/2, 4 (90, 100) 9G-1159-31/2, 4

Conduit to Tray Adaptor

• Assembly required.
• Mounting hardware included. Catalog No.
• Conduit clamp included
9ZN-1150-(‡)
• (‡) = Conduit size (1/2" thru 4").

Cable Tie (Ladder Tray)

• Nylon ties provide easy attachment of cable
Catalog No.
to ladder rungs; maximum cable O.D. of 3" (76 mm). Overall Length 15"
99-2125-15

Cable Tray Clamp/Guide

• Features a no-twist design.
• Has four times the strength of the traditional design. Patent # RE35479
• Each side is labeled to ensure proper installation.
• Furnished in pairs, with or without hardware.
Catalog No.
9ZN-1204 shown. 9ZN-1208 shown. Without With Overall Hardware
Installed as a guide. Installed as a clamp. Hardware Hardware Length Size Finish
in. (mm)
9ZN-1204 9ZN-1204NB 11/2 38 1/4" G90
11/2" 21/4" 9ZN-1208 9ZN-1208NB 21/4 57 3/8" G90
(39mm) (57mm)
Series 1 Steel

Bonding Jumper
Use at each expansion splice and where the cable tray is not
mechanically/electrically continuous to ground.
Sold individually.
• Hardware included.
• See table 392.7(B)(2) on page C-9 for amperage ratings
required to match the UL cross-sectional area of the tray. Catalog No. Copper Wire Size
• 600 amp rating.
• Bonding jumper is 141/2" (368mm) long. 99-N1 #1

Grounding Clamp
Eaton’s B-Line series cable tray is UL® classified as to its suitability as an equipment
grounding conductor. If a separate conductor for additional grounding capability is
desired, we offer this clamp for bolting the conductor at least once to each tray section. Catalog No.
• Tin plated Aluminum clamp accepts #6 AWG to 250 MCM.
9A-2130

Ground Wire Clamp

• Mechanically attaches grounding cables to cable tray.
• Hardware included.
Catalog No. Cable Size
• (*) Insert ZN or SS4
9(*)-2351 #1 thru 2/0
9(*)-2352 3/0 thru 250 MCM

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-9 B-Line series Cable Tray Systems

Series 1 Steel - Accessories
Threaded Rod (ATR) & Rod Coupling
• Loading based on safety factor 5.
• Standard Finish: Zinc plated
Loading Threaded Rod Available Lengths Coupling
Size lbs. (kN) Catalog No. in. (mm) Cat. No.
3/8-16 36, 72, 120, 144
730 (3.25) ATR 3/8 x Length B655-3/8
(914, 1829, 3048, 3657)

1/2-13 36, 72, 120, 144

1350 (6.00) ATR 3/8 x Length B655-1/2
(914, 1829, 3048, 3657)
See B-Line series Strut Systems Catalog for other sizes and finishes.

Hanger Rod Clamp

• For 1/2" ATR.
• Furnished in pairs.
• Order ATR and hex nuts separately.
Tray
• Two piece "J"-hanger design.
Series Catalog No.
• 9ZN-1113 has 275 lbs./pair.
• 9ZN-532(X) has 1350 lbs./pair. 148 9ZN-1113
156 9ZN-5324
9ZN-5324 166 9ZN-5325
9ZN-1113 9ZN-5325 176 9ZN-5326
9ZN-5326

Support Bracket
• Designed for center hung or trapeze supports. Catalog No. For
• Used with ladder or vented bottom tray only. Cable Tray
• Can be purchased as a wall mounted bracket. Center Hung Wall Width
or Trapeze Mount in. (mm)
• Load capacity is 600 lbs. (272.1 kg),
safety factor 3. 9ZN-5106 9ZN-5106-WB 6 (152)
• All components are zinc plated. 9ZN-5109 9ZN-5109-WB 9 (226)
• 1/2" threaded rod and 1/2" hex nuts not included. 9ZN-5112 9ZN-5112-WB 12 (305)
9ZN-5118 9ZN-5118-WB 18 (452)
Patent No.

Series 1 Steel
5,100,086
9ZN-5124 9ZN-5124-WB 24 (609)

Cantilever Bracket (12” - 42”)

• Finishes available:
ZN GRN or HDG
• Safety Load Factor 2.5

Catalog Uniform Load Tray Width 'A' 'H'

No. lbs (kN) in. (mm) in. (mm) in. (mm)
B494-12 2500 (11.12) 6 & 9 (152 & 229) 12 (305) 83/4 (222)
H A
B494-18 1700 (7.56) 12 (305) 18 (457) 83/4 (222)
B494-24 1300 (5.78) 18 (457) 24 (610) 83/4 (222)
B494-30 1600 (7.11) 24 (610) 30 (762) 111/4 (286)
B494-36 1100 (4.89) 30 (762) 36 (914) 111/4 (286)
B494-42 980 (4.36) 36 (914) 42 (1067) 16 (406)
Bottom brace is B42 channel on
B494-24 and smaller and For more dimensional data see Strut Systems catalog
B22 channel on B494-30 and larger

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-10 Eaton

Series 1 Steel - Accessories
Cantilever Bracket
• Finishes available:
ZN GRN HDG SS4 or SS6
• Safety Load Factor 2.5
Catalog No. Uniform Load Tray Width 'A'
A lbs (kN) in. (mm) in. (mm)

B409-12 960 (4.27) 6 & 9 (152 & 229) 12 (304.8)

B409-18 640 (2.84) 12 (305) 18 (457.2)
B409-24 480 (2.13) 18 (457) 24 (609.6)

Cantilever Bracket
• Finishes available:
ZN GRN HDG or SS4
• Safety Load Factor 2.5
A
Catalog No. Uniform Load Tray Width 'A'
lbs (kN) in. (mm) in. (mm)

B297-30 665 (2.95) 24 (609.6) 30 (762.0)

B297-36 550 (2.44) 30 (762.0) 36 (914.4)
B297-42 465 (2.06) 36 (914.4) 42 (1066.8)

Underfloor Support (U-Bolts not included)

• Finishes available: ZN
• Safety Load Factor 2.5
• Order properly sized U-Bolts separately.

U-Bolt Size Fits Pipe O.D.

B501-3/4 .841 - 1.050 Catalog No. Uniform Load Tray Width 'A'
B501-1 1.051 - 1.315 A lbs (kN) in. (mm) in. (mm)
B501-11/4 1.316 - 1.660
B501-11/2 1.661 - 1.900 B409UF-12 800 (3.55) 6 & 9 (152 & 229) 12 (304.8)
B501-2 1.901 - 2.375 B409UF-21 450 (2.00) 12 & 18 (305 & 457) 21 (533.4)
Series 1 Steel

B501-21/2 2.376 - 2.875

Beam Clamp
• Finishes available: ZN or HDG
• Sold in pieces with hardware.
• Design load when used in pairs.
Safety Load Factor 5.0
Catalog No. Design Load* 'A'
A lbs (kN) in. (mm)

B441-22 1200 (5.34) 33/8 (86)

B441-22A 1200 (5.34) 5 (127)

Steel C-Clamp With Locknut

• Finishes available:
ZN for 3/8 & 1/2
ZN for 5/8 & 3/4 Catalog Rod Design Load
Number Size lbs (kN)
SS4 all sizes
B351L-3/8 3/8"-16 300 (0.89)
• Safety Load Factor 5.0
B351L-1/2 1/2"-13 380 (1.69)
B351L-5/8 5/8"-11 550 (2.44)
B351L-3/4 3/4"-10 630 (2.80)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-11 B-Line series Cable Tray Systems

Series 1 Steel - Accessories
Beam Clamp
• Finishes available: ZN GRN or HDG
• Setscrew included. Cat. No. B210 B210A
• Sold in pieces.
• Design load when used in pairs. Design Load 800 lbs. (3.56kN) 300 lbs. (1.33kN)
Safety Load Factor 5.0 Tap Size 1/2"-13 3/8"-16

Mat'l. Thickness 3/8" (9.5mm) 1/4" (6.4mm)

Beam Clamp
• Finishes available: ZN GRN or HDG
• Setscrew included.
• Sold in pieces.
Cat. No. B212-1/4 B212-3/8
• Design load when used in pairs.
Safety Load Factor 5.0 Design Load 800 lbs. (3.56kN) 1000 lbs. (4.45kN)
Max. Flange Thick. 3/4" (19.0mm) 11/8" (28.6mm
Mat'l. Thickness 1/4" (6.4mm) 3/8" (9.5mm)

B305 Thru B308 & B321 Series Beam Clamps

• Finishes available: ZN or HDG
• Setscrew included.
• Safety Load Factor 5.0 Cat. A B C D E F T Design Load
B
No. in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) lbs (kN)
B305 3/8"-16 3/8"-16 25/16 (58.7) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 11 Ga. (3.0) 600 (2.67)
B306 3/8"-16 1/2"-13 2 7/16 (61.9) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 7 Ga. (4.5) 1100 (4.90)
C
D B307 1/2"-13 1/2"-13 27/16 (61.9) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 7 Ga. (4.5) 1100 (4.90)
E
B308 1/2"-13 1/2"-13 29/16 (65.1) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 1/4 (6.3) 1500 (6.68)
B321-1 3/8"-16 1/2"-13 39/16 (90.5) 11
1 /16 (42.8) 15/8 (41.3) 31/4 (82.5) 1/4 (6.3) 1300 (5.79)
F T 1/2"-13 1/2"-13
A B321-2 39/16 (90.5) 111/16 (42.8) 15/8 (41.3) 31/4 (82.5) 1/4 (6.3) 1400 (6.23)

Series 1 Steel
B312 Anchor Strap
• Finishes available: ZN or HDG
Cat. No. Flange Width
• For a maximum beam thickness of 3/4". in. (mm)
• For thicker beams, step up one flange width size.
B312-6 Up to 6 (up to 152.4)
B312-9 6 - 9 (152.4 to 228.6)
B312-12 9 - 12 (228.6 to 304.8)

B751 Bottom Beam Clamp and Accessories

• Setscrew included.
• Finish available: ZN Loading position A - 500 lbs. B751
Loading position B - 300 lbs.
Safety Load Factor 5.0
B751-J_-3/8*

B701-J_-3/8
Position A Position B

Assembly No. B751 B701J_ B752 B753

Fits Flange Sizes Clamp,Setscrew J-Hook,Clip Swivel & Bolt Swivel Nut
in. (mm) & J-Hook & Square Nut Only Only
4 - 57/8 (101 - 149) B751-J4-3/8* B701-J4-3/8 B752 B753-**
B753
6 - 87/8 (152 - 225) B751-J6-3/8* B701-J6-3/8 B752 B753-**
Provides a full 15° swivel B752 9 - 117/8 (228 - 301) B751-J9-3/8* B701-J9-3/8 B752 B753-**
in any direction. (State
the desired rod size.) * Clamp Assembly complete with J-Hook Assembly. Setscrew included. ** Insert 1/4, 3/8 or 1/2 for the desired rod size.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-12 Eaton

Series 1 Steel - Accessories
Trapeze Support Kit
Trapeze kits provide the components required for a single Catalog Tray Channel Uniform
trapeze support in one package. These kits are available in No. Width Length Load
pre-galvanized steel with zinc-plated hardware or hot dip in. (mm) in. (mm) lbs (kN)
galvanized steel with 316 stainless steel hardware.
9(*)-5506-22SH(†) 6 (152) 16 (406) 1600 (7.11)
The SH channel provides the convenience of pre-punched slots,
which eliminate the need for field drilling. 9(*)-5509-22SH(†) 9 (229) 18 (457) 1250 (5.56)
9(*)-5512-22SH(†) 12 (305) 22 (559) 1125 (5.00)
The illustrated hardware is sealed in a plastic bag and boxed with
the channel, which is pre-cut to the appropriate length as shown 9(*)-5518-22SH(†) 18 (457) 28 (711) 865 (3.85)
in the chart. 9(*)-5524-22SH(†) 24 (610) 34 (864) 700 (3.11)
Designed for use with 1/2" threaded rod. (2) 9ZN-1205 9(*)-5530-22SH(†) 30 (762) 40 (1016) 590 (2.62)
Hold-Down
(order separately) Guide Clamp
9(*)-5536-22SH(†) 36 (914) 46 (1168) 510 (2.27)
9(*)-5542-22SH(†) 42 (1067) 52 (1321) 450 (2.00)
(2) 1/2" x 7/8" Hex
Head Cap Screw
(2) N525WO • (*) Insert P or G
Channel Nut
• (†) Insert 3/8 for 3/8" threaded rod hardware.
Safety factor of 3.0 on all loads.

(1) B22 Channel

cut to the
required length
(4) 1/2" Hex Nut
(4) B202
Square Washer

Heavy Duty Trapeze Support Kit

Trapeze kits provide the components required for a single Catalog Tray Channel Uniform
trapeze support in one package. These kits are available in No. Width Length Load
in. (mm) in. (mm) lbs (kN)
Dura Green™ epoxy coated steel with zinc-plated hardware
or hot dip galvanized steel with 316 stainless steel hardware. 9(*)-5506-22SHA 6 (152) 16 (406) 1350 (6.01)
The SH channel provides the convenience of pre-punched slots, 9(*)-5509-22SHA 9 (229) 18 (457) 1350 (6.01)
which eliminates the need for field drilling. 9(*)-5512-22SHA 12 (305) 22 (559) 1350 (6.01)
The illustrated hardware is (2) 1/2" x 7/8" Hex 9(*)-5518-22SHA 18 (457) 28 (711) 1350 (6.01)
Head Cap Screw (2) 9ZN-1205
sealed in a plastic bag and 9(*)-5524-22SHA 24 34 (864) 1350 (6.01)
Series 1 Steel

(610)
Hold-Down
boxed with the channel, which Guide Clamp 9(*)-5530-22SHA 30 (762) 40 (1016) 1350 (6.01)
is pre-cut to the appropriate
9(*)-5536-22SHA 36 (914) 46 (1168) 1350 (6.01)
length as shown in the chart. (2) N525WO
Channel Nut 9(*)-5542-22SHA 42 (1067) 52 (1321) 1350 (6.01)
Designed for use with 1/2"
threaded rod. • (*) Insert G or GRN
(order rod separately)
Safety factor of 3.0 on all loads.
(1) Channel
cut to the
required
length

(4) B202
(4) 1/2" Hex Nut Square Washer

Trapeze Hardware Kit

• Kit sold in plastic bag. Catalog No.
9ZN-5500-1/2 9G-5500-1/2
(1) pr. 9ZN-1205 (1) pr. 9G-1205
(2) HHC Screw 1/"2 x 7/8" ZN (2) HHC Screw 1/2" x 7/8" SS6
(2) N525 WO ZN (2) N525 WO SS6
(4) B202 ZN 1/2" sq washer (4) B202 HDG 1/2" sq washer
(4) HN 1/2" ZN (4) HN 1/2" SS6

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items
All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-13 B-Line series Cable Tray Systems

Series 1 Steel - Accessories
Ladder Drop-Out
• This special designed, easy to install drop-out provides a
4" (101.6 mm) radius to protect cables exiting the cable tray
from damage.
• Attaches to a ladder rung.
• Hardware included.
• (*) Insert P or G Catalog No.
• (‡) Insert tray width
9(*)-1104T-(‡)

Straight Section
• Standard length: 120" (3 m) 144" (12 ft.).
• Order catalog number based on loading depth.
• Furnished with four #10 x 1/2" plated self-drilling Tray H
screws and a 99-9982 splice. Series Catalog No. in. (mm)

• () Insert P or G H 148 72()-Length 2.8 (58)

156 737(*)-Length 3.4 (70)
Length = 166 747(*)-Length 4.4 (91)
144 for 12'or 120 for 10' 176 757(*)-Length 5.4 (112)

Horizontal Bend
• Horizontal Bend Barriers are flexible in order to conform to any
horizontal fitting radius. Cut to length.
• Order catalog number based on loading depth. Tray H
• Furnished with three #10 x 1/2” zinc plated self-drilling screws and Series Catalog No. in. (mm)
a 99-9982 Barrier Strip Splice.
148 72(*)-90HBFL 2.8 (58)
• Standard length is 72” [6 ft.] (1829mm), sold individually.
156 737(*)-90HBFL 3.4 (70)
• (*) Insert P or G
166 747(*)-90HBFL 4.4 (91)
H
176 757(*)-90HBFL 5.4 (112)

Series 1 Steel
Vertical Bend Barriers
• Vertical Bend Barriers are preformed to conform to a specific vertical fitting.
• Furnished with three #10 x 1/2" plated self-drilling screws
and a 99-9982 Barrier Strip Splice.
H
• (*) Insert P or G
• (**) Insert 30, 45, 60 or 90 for degrees
Tray Catalog No. H
• (†) Insert 12, 24, or 36 for radius Series Inside Bend Outside Bend in. (mm)
Inside
Outside 148 72(*)-(**)VI(†) 72(*)-(**)VO(†) 2.8 (58)
Bend
Bend
(VI) 156 737(*)-(**)VI(†) 737(*)-(**)VO(†) 3.4 (70)
(VO)
166 747(*)-(**)VI(†) 747(*)-(**)VO(†) 4.4 (91)
H 176 757(*)-(**)VI(†) 757(*)-(**)VO(†) 5.4 (112)

Barrier Strip Splice

• 2.85" (72.4mm) long
• Ribbed edge for increased rigidity and grip
• Comfort edge for ease of installation
• Slotted top window with center mark for
accurate placement and inspection capability Catalog No.
• Patent pending 99-9982

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-14 Eaton

Series 1 Steel - Accessories
Covers
Solid covers should be used when maximum enclosure
of the cables is desired and no accumulation of heat is
expected. Ventilated covers provide an overhead cable
shield yet allow heat to escape.
We recommend that covers on vertical cable tray runs to
a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor to
isolate both cables and personnel. Flanged covers
have a .30 in. (7.6 mm) flange. Cover clamps are not
included with the cover and must be ordered
separately.

Solid Non-Flanged Solid Flanged Ventilated Flanged

Covers Part Numbering

Prefix
Example: 80 1 P - 24 - 144

Cover Type Detail Material Tray Width Item Description

80 = Solid 1 = Flanged P = Pre-Galvanized 06 = 6" For Straight Section Cover:
81 = Ventilated 9 = Non-Flanged G = HDGAF 09 = 9" Pre-Galvanized Only:
12 = 12" 144 = 12 ft. (3.66 m)
18 = 18" 120 = 10 ft. (3.05 m)
24 = 24" Pre-Galvanized & HDGAF
30 = 30" 72 = 6 ft. (1.83 m)
36 = 36" 60 = 5 ft. (1.52 m)
For fitting covers: Insert suffix of fitting
to be covered. See example below.
Series 1 Steel

Example of Catalog Number for Fitting Cover:

Vertical Bend Cover
Prefix Suffix * Required for VO fittings only.
80 1 P - 24 - 90 VO 24 - 4*

Side Rail* Height

Radius
Fitting
Angle
Width
Material
Detail
Cover Type

Quantity of Standard Cover Clamps Required

Straight Section 60" or 72" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 pcs.
Straight Section 120" or 144" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 pcs.
Horizontal/Vertical Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 pcs.
Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 pcs.
Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 pcs.
Note: When using the Heavy Duty Cover Clamp, only one-half
the number of clamps stated above is required.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-15 B-Line series Cable Tray Systems

Series 1 Steel - Accessories
Cover Joint Strip
• Used to join covers
• Plastic
• (‡) Insert tray width
Catalog No.
99-9980-(‡)

Standard Cover Clamp

• Sold per piece
• For indoor service only

Tray Catalog No.

Series Znplt HDGAF
148 9ZN-9019 9G-9019
156 9ZN-9014 9G-9014
166 9ZN-9015 9G-9015
176 9ZN-9016 9G-9016

Combination Hold Down & Cover Clamp

• Sold per piece
• For indoor service only

Tray Catalog No.

Series Znplt/Pre-Galv HDGAF
148 9ZN-9243 9G-9243
156 9P-9043 9G-9043
166 9P-9053 9G-9053
176 9P-9063 9G-9063

Series 1 Steel
Heavy Duty Cover Clamp
• (‡) Insert tray width

Tray Catalog No.

Series Pre-Galv HDGAF
148 9P-(‡)-9040 9G-(‡)-9040
156 9P-(‡)-9044 9G-(‡)-9044
166 9P-(‡)-9054 9G-(‡)-9054
176 9P-(‡)-9064 9G-(‡)-9064

Raised Cover Clamp

• For indoor service only.
• Sold per piece
• For use with flanged covers only.
Tray Gap
Series Catalog No. in. (mm)

9ZN-9101 1 (25.4)
9ZN-9102 2 (50.8)
Series 1
9ZN-9103 3 (76.2)
† Specify gap of 1", 2", 3" or 4". 9ZN-9104 4 (101.6)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-16 Eaton
Series 1 Steel - Specifications

Section 1- Acceptable Manufacturers

1.01 Manufacturer: Subject to compliance with these specifications, Eaton’s B-Line series cable tray systems shall
be as manufactured by Eaton.

Section 2- Cable Tray Sections and Components

2.03 Hot dip Galvanized Steel: All side rails, covers, splice plates, and rungs shall be made from structural
quality steel meeting the minimum mechanical properties of ASTM A1011 SS, Grade 33 for 14 gauge
and heavier, ASTM A1008, Grade 33 Type 2 for 16 gauge and lighter, and shall be hot dip galvanized
after fabrication in accordance with ASTM A123. Mill galvanized covers are not acceptable for hot dipped
galvanized cable tray. Hardware finish shall be chromium zinc per ASTM F-1136-88.

2.04 Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members (rungs)
welded to the side rails. Rungs shall be spaced [6] [9] [12] inches apart. Rung spacing in radiused
fittings shall be industry standard 9" and measured at the center of the tray’s width. No portion of the
rungs shall protrude below the bottom plane of the side rails.

2.05 Ventilated Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated
bottom welded to the side rails or rungs spaced 4" apart. The peaks of the corrugated bottom
shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers. To
provide ventilation in the tray, the valleys of the corrugated bottom shall have 21/4" x 4" rectangular
holes punched along the width of the bottom.
Series 1 Steel

2.06 Non-Ventilated Bottom Trough Cable Trays shall consist of two longitudinal members (side rails) with a
corrugated bottom welded to the side rails or a solid sheet over rungs. The peaks of the corrugated
bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers.
2.07 Cable tray loading depth shall be [3] [4] [5] [6] inches per NEMA VE 1.
2.08 Straight sections shall be supplied in standard [12 foot] [10 foot (3 m)] lengths.
2.09 Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.
2.10 Splice plates shall be L-shaped with 4 nuts and bolts per plate. The resistance of fixed splice
connections between an adjacent section of tray shall not exceed 0.00033 ohm.
2.11 All fittings must have a minimum radius of [12] [24] inches.

Section 3- Loading Capacities and Testing

3.01 Cable tray shall be capable of carrying a uniformly distributed load of ______ lbs./ft. on a _______ ft.
support span with a safety factor of 1.5 when supported as a simple span and tested per
NEMA VE 1 5.2. Cable tray shall be made to manufacturing tolerances as specified by NEMA.
3.02 Upon request, manufacturer shall provide test reports in accordance with the latest revision of
NEMA VE 1 or CSA C22.2 No. 126.

Eaton H-17 B-Line series Cable Tray Systems

Series 1 Steel - Fittings

Fittings engineered
with 3" tangents for
splicing integrity.

Fittings Part Numbering

Prefix
Example: 1 4 P - 24 - 90 HB 24 (9" rung spacing is standard)

Series 1 Steel
Series Height Material Width Angle Type Radius
1 4 = 148 P = Pre-Galvanized 06 = 6" (152) 30 = 30° HB = Horizontal Bend 12 = 12" (305)
5 = 156 G = HDGAF 09 = 9" (228) 45 = 45° HT = Horizontal Tee 24 = 24" (609)
6 = 166 12 = 12" (305) 60 = 60° HX = Horizontal Cross 36 = 36" (914)
7 = 176 18 = 18" (457) 90 = 90° VI = Vertical Inside Bend
24 = 24" (609) VO = Vertical Outside Bend
30 = 30" (762) LR = Left Reducer
36 = 36" (914) RR = Right Reducer
SR = Straight Reducer

For steel 4”, 5", 6", 7" vented or non-ventilated add 04 or SB as shown below.
Prefix Prefix
15P04 - 24 - 90HB24 15PSB - 24 - 90HB24
Vented Bottom Non-Ventilated

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-18 Eaton
Series 1 Steel - Fittings

Horizontal Bends 90° 60° 45° 30° (HB)

1 pair splice plates with hardware included.

Bottoms manufactured: 90˚ Horizontal Bend

60˚ Horizontal Bend
Ladder = 9" Rung Spacing C 45˚ Horizontal Bend 30˚ Horizontal Bend
04 = 4" Rung Spacing C
SB = Flat sheet over 12” C C
C
Rung Spacing C C
B C B
R B B
3" (76) R (76
)

)
R 3" R

(76
6)
(7

3"
A 3" A
A A

Bend Tray 90˚ Horizontal Bend 60˚ Horizontal Bend

Radius Width Dimensions Dimensions
R Catalog No. A B C Catalog No. A B C
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)
6 (152) (Pre)-06-90HB12 18 (457) 18 (457) 18 (457) (Pre)-06-60HB12 171/2 (445) 101/8 (257) 1111/16 (297)
9 (228) (Pre)-09-90HB12 191/2 (495) 191/2 (495) 191/2 (495) (Pre)-09-60HB12 1813/16 (478) 107/8 (276) 121/2 (318)
12 (305) (Pre)-12-90HB12 21 (533) 21 (533) 21 (533) (Pre)-12-60HB12 201/16 (510) 115/8 (295) 133/8 (340)
12 (305) 18 (457) (Pre)-18-90HB12 24 (610) 24 (610) 24 (610) (Pre)-18-60HB12 2211/16 (576) 131/8 (333) 151/8 (384)
24 (609) (Pre)-24-90HB12 27 (686) 27 (686) 27 (686) (Pre)-24-60HB12 255/16 (643) 145/8 (372) 167/8 (429)
30 (762) (Pre)-30-90HB12 30 (762) 30 (762) 30 (762) (Pre)-30-60HB12 277/8 (708) 161/8 (410) 189/16 (472)
36 (914) (Pre)-36-90HB12 33 (838) 33 (838) 33 (838) (Pre)-36-60HB12 301/2 (775) 175/8 (448) 205/16 (516)
6 (152) (Pre)-06-90HB24 30 (762) 30 (762) 30 (762) (Pre)-06-60HB24 277/8 (708) 161/8 (410) 189/16 (472)
9 (228) (Pre)-09-90HB24 311/2 (800) 311/2 (800) 311/2 (800) (Pre)-09-60HB24 293/16 (741) 167/8 (429) 197/16 (494)
12 (305) (Pre)-12-90HB24 33 (838) 33 (838) 33 (838) (Pre)-12-60HB24 301/2 (775) 175/8 (448) 205/16 (516)
Series 1 Steel

24 (609) 18 (457) (Pre)-18-90HB24 36 (914) 36 (914) 36 (914) (Pre)-18-60HB24 331/16 (840) 191/8 (486) 221/16 (560)
24 (609) (Pre)-24-90HB24 39 (991) 39 (991) 39 (991) (Pre)-24-60HB24 3511/16 (907) 205/8 (524) 2313/16 (605)
30 (762) (Pre)-30-90HB24 42 (1067) 42 (1067) 42 (1067) (Pre)-30-60HB24 381/4 (972) 221/8 (562) 251/2 (648)
36 (914) (Pre)-36-90HB24 45 (1143) 45 (1143) 45 (1143) (Pre)-36-60HB24 407/8 (1038) 235/8 (600) 271/4 (692)

45˚ Horizontal Bend 30˚ Horizontal Bend

6 (152) (Pre)-06-45HB12 153/4 (400) 61/2 (165) 93/16 (233) (Pre)-06-30HB12 131/8 (333) 31/2 (89) 7 (175)
9 (228) (Pre)-09-45HB12 1613/16 (427) 615/16 (176) 913/16 (249) (Pre)-09-30HB12 137/8 (352) 311/16 (94) 77/16 (189)
12 (305) (Pre)-12-45HB12 177/8 (454) 73/8 (187) 107/16 (265) (Pre)-12-30HB12 145/8 (372) 315/16 (100) 713/16 (198)
12 (305) 18 (457) (Pre)-18-45HB12 20 (500) 81/4 (210) 1111/16 (297) (Pre)-18-30HB12 161/8 (410) 45/16 (135) 85/8 (219)
24 (609) (Pre)-24-45HB12 221/16 (560) 91/8 (232) 1215/16 (329) (Pre)-24-30HB12 175/8 (448) 411/16 (119) 97/16 (240)
30 (762) (Pre)-30-45HB12 243/16 (614) 10 (250) 143/16 (360) (Pre)-30-30HB12 191/8 (486) 51/8 (130) 101/4 (260)
36 (914) (Pre)-36-45HB12 5 15
26 /16 (668) 10 /16 (278) 157/16 (392) (Pre)-36-30HB12 205/8 (524) 51/2 (140) 111/16 (281)
6 (152) (Pre)-06-45HB24 243/16 (614) 10 (250) 143/16 (360) (Pre)-06-30HB24 191/8 (486) 51/8 (130) 101/4 (260)
9 (228) (Pre)-09-45HB24 251/4 (641) 101/2 (267) 1413/16 (376) (Pre)-09-30HB24 197/8 (505) 55/16 (135) 105/8 (270)
12 (305) (Pre)-12-45HB24 265/16 (668) 1015/16 (278) 157/16 (392) (Pre)-12-30HB24 205/8 (524) 51/2 (140) 111/16 (281)
24 (609) 18 (457) (Pre)-18-45HB24 287/16 (722) 1113/16 (300) 1611/16 (424) (Pre)-18-30HB24 221/8 (562) 515/16 (151) 1113/16 (300)
24 (609) (Pre)-24-45HB24 309/16 (776) 1211/16 (322) 1715/16 (456) (Pre)-24-30HB24 235/8 (600) 65/16 (160) 125/8 (321)
30 (762) (Pre)-30-45HB24 3211/16 (830) 139/16 (345) 191/8 (486) (Pre)-30-30HB24 251/8 (638) 63/4 (172) 137/16 (341)
36 (914) (Pre)-36-45HB24 3413/16 (884) 147/16 (367) 203/8 (518) (Pre)-36-30HB24 265/8 (676) 71/8 (181) 141/4 (362)

(Pre) See page H-18 for catalog number prefix.

Width dimensions are to inside wall. Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-19 B-Line series Cable Tray Systems

Series 1 Steel - Fittings

Horizontal Tee (HT)

2 pair splice plates with hardware included.

Bend Tray Horizontal Tee

Radius Width Dimensions
R Catalog No. A B
in. (mm) in. (mm) in. (mm) in. (mm)

6 (152) (Prefix)-06-HT12 18 (457) 36 (914)

9 (228) (Prefix)-09-HT12 191/2 (495) 39 (991)
12 (305) (Prefix)-12-HT12 21 (533) 42 (1067)
12 (305) 18 (457) (Prefix)-18-HT12 24 (610) 48 (1219)
24 (609) (Prefix)-24-HT12 27 (686) 54 (1372)
30 (762) (Prefix)-30-HT12 30 (762) 60 (1524)
B
36 (914) (Prefix)-36-HT12 33 (838) 66 (1676)
6 (152) (Prefix)-06-HT24 30 (762) 60 (1524) W

311/2

3" (76)
9 (228) (Prefix)-09-HT24 (800) 63 (1600)
A
12 (305) (Prefix)-12-HT24 33 (838) 66 (1676) R
24 (609) 18 (457) (Prefix)-18-HT24 36 (914) 72 (1829)
24 (609) (Prefix)-24-HT24 39 (991) 78 (1981)
30 (762) (Prefix)-30-HT24 42 (1067) 84 (2134)
36 (914) (Prefix)-36-HT24 45 (1143) 90 (2286)

(Prefix) See page H-18 for catalog number prefix.

Horizontal Cross (HX)

3 pair splice plates with hardware included.

Series 1 Steel
Bend Tray Horizontal Cross
Radius Width Dimensions
R Catalog No. A B
in. (mm) in. (mm) in. (mm) in. (mm)

6 (152) (Prefix)-06-HX12 18 (457) 36 (914)

9 (228) (Prefix)-09-HX12 191/2 (495) 39 (991)
12 (305) (Prefix)-12-HX12 21 (533) 42 (1067)
12 (305) 18 (457) (Prefix)-18-HX12 24 (610) 48 (1219)
24 (609) (Prefix)-24-HX12 27 (686) 54 (1372)
30 (762) (Prefix)-30-HX12 30 (762) 60 (1524)
36 (914) (Prefix)-36-HX12 33 (838) 66 (1676) B

6 (152) (Prefix)-06-HX24 30 (762) 60 (1524)

9 (228) (Prefix)-09-HX24 311/2 (800) 63 (1600)
12 (305) (Prefix)-12-HX24 33 (838) 66 (1676)
W
24 (609) 18 (457) (Prefix)-18-HX24 36 (914) 72 (1829)
3" (76)

24 (609) (Prefix)-24-HX24 39 (991) 78 (1981) A

30 (762) (Prefix)-30-HX24 42 (1067) 84 (2134)

36 (914) (Prefix)-36-HX24 45 (1143) 90 (2286)
(Prefix) See page H-18 for catalog number prefix.

Width dimensions are to inside wall. Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-20 Eaton
Series 1 Steel - Fittings

Reducers (LR, SR, RR)

1 pair splice plates with hardware included.

Reducer Part Numbering

14P - 24 - RR 18

Width2
Fitting
Width1
Prefix Left Reducer - LR Straight Reducer - SR Right Reducer - RR

W2 W2 W2

A
A A

W1 W1 W1

Tray Width Left Reducer - LR Straight Reducer - SR Right Reducer - RR

W1 W2 Catalog No. A Catalog No. A Catalog No. A
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

9 (228) 6 (152) (Prefix)-09-LR06 93/4 (248) (Prefix)-09-SR06 87/8 (225) (Prefix)-09-RR06 93/4 (248)
6 (152) (Prefix)-12-LR06 111/2 (292) (Prefix)-12-SR06 93/4 (248) (Prefix)-12-RR06 111/2 (292)
12 (305)
9 (228) (Prefix)-12-LR09 93/4 (248) (Prefix)-12-SR09 87/8 (225) (Prefix)-12-RR09 93/4 (248)
Series 1 Steel

6 (152) (Prefix)-18-LR06 1415/16 (379) (Prefix)-18-SR06 111/2 (292) (Prefix)-18-RR06 1415/16 (379)
18 (457) 9 (228) (Prefix)-18-LR09 133/16 (335) (Prefix)-18-SR09 105/8 (270) (Prefix)-18-RR09 133/16 (335)
12 (305) (Prefix)-18-LR12 111/2 (292) (Prefix)-18-SR12 93/4 (248) (Prefix)-18-RR12 111/2 (292)
6 (152) (Prefix)-24-LR06 183/8 (467) (Prefix)-24-SR06 133/16 (335) (Prefix)-24-RR06 183/8 (467)
9 (228) (Prefix)-24-LR09 1611/16 (424) (Prefix)-24-SR09 123/8 (314) (Prefix)-24-RR09 1611/16 (424)
24 (609)
12 (305) (Prefix)-24-LR12 1415/16 (379) (Prefix)-24-SR12 111/2 (292) (Prefix)-24-RR12 1415/16 (379)
18 (457) (Prefix)-24-LR18 111/2 (292) (Prefix)-24-SR18 93/4 (248) (Prefix)-24-RR18 111/2 (292)
6 (152) (Prefix)-30-LR06 217/8 (555) (Prefix)-30-SR06 1415/16 (379) (Prefix)-30-RR06 217/8 (555)
9 (228) (Prefix)-30-LR09 201/8 (511) (Prefix)-30-SR09 141/16 (358) (Prefix)-30-RR09 201/8 (511)
30 (762) 12 (305) (Prefix)-30-LR12 183/8 (467) (Prefix)-30-SR12 133/16 (335) (Prefix)-30-RR12 183/8 (467)
18 (457) (Prefix)-30-LR18 1415/16 (379) (Prefix)-30-SR18 111/2 (292) (Prefix)-30-RR18 1415/16 (379)
24 (609) (Prefix)-30-LR24 111/2 (292) (Prefix)-30-SR24 93/4 (248) (Prefix)-30-RR24 111/2 (292)
6 (152) (Prefix)-36-LR06 255/16 (643) (Prefix)-36-SR06 1611/16 (424) (Prefix)-36-RR06 235/16 (643)
9 (228) (Prefix)-36-LR09 239/16 (598) (Prefix)-36-SR09 1513/16 (402) (Prefix)-36-RR09 239/16 (598)
12 (305) (Prefix)-36-LR12 217/8 (555) (Prefix)-36-SR12 1415/16 (379) (Prefix)-36-RR12 217/8 (555)
36 (914)
18 (457) (Prefix)-36-LR18 183/8 (467) (Prefix)-36-SR18 133/16 (335) (Prefix)-36-RR18 183/8 (467)
24 (609) (Prefix)-36-LR24 1415/16 (379) (Prefix)-36-SR24 111/2 (292) (Prefix)-36-RR24 1415/16 (379)
30 (762) (Prefix)-36-LR30 111/2 (292) (Prefix)-36-SR30 93/4 (248) (Prefix)-36-RR30 111/2 (292)
(Prefix) See page H-18 for catalog number prefix.

Width dimensions are to inside wall. Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-21 B-Line series Cable Tray Systems

Series 1 Steel - Fittings

Vertical Bend 90° (VO, VI)

1 pair splice plates with hardware included.

A C

3" (76)
R
B C
3" (76)

C B
R

C A

90° Vertical Inside 90° Vertical Outside

90° Vertical Inside Bend (VI)

Bend VI Dimensions [in. (mm)]
Radius Series 14 Steel Series 15 Steel Series 16 Steel Series 17 Steel
R Width
Catalog No.
in. (mm) in. (mm) A B C A B C A B C A B C
6 (152) (Pre)-06-90VI12
9 (228) (Pre)-09-90VI12
12 (305) (Pre)-12-90VI12
18 7/16 18 7/16 18 7/16 19 3/16 19 3/16 19 3/16 20 3/16 20 3/16 20 3/16 21 3/16 21 3/16 21 3/16
12 (305) 18 (457) (Pre)-18-90VI12
(468) (468) (468) (487) (487) (487) (513) (513) (513) (538) (538) (538)
24 (609) (Pre)-24-90VI12
30 (762) (Pre)-30-90VI12
36 (914) (Pre)-36-90VI12
6 (152) (Pre)-06-90VI24
9 (228) (Pre)-09-90VI24
12 (305) (Pre)-12-90VI24
30 7/16 30 7/16 30 7/16 31 3/16 31 3/16 31 3/16 32 3/16 32 3/16 32 3/16 33 3/16 33 3/16 33 3/16
24 (609) 18 (457) (Pre)-18-90VI24
(773) (773) (773) (792) (792) (792) (817) (817) (817) (843) (843) (843)
24 (609) (Pre)-24-90VI24

Series 1 Steel
30 (762) (Pre)-30-90VI24
36 (914) (Pre)-36-90VI24

90° Vertical Outside Bend (VO)

Bend VO Dimensions [in. (mm)]
Radius All Series 1
R Width
Catalog No.
in. (mm) in. (mm) A B C
6 (152) (Pre)-06-90VO12
9 (228) (Pre)-09-90VO12
12 (305) (Pre)-12-90VO12
15 15 15
12 (305) 18 (457) (Pre)-18-90VO12
(381) (381) (381)
24 (609) (Pre)-24-90VO12
30 (762) (Pre)-30-90VO12
36 (914) (Pre)-36-90VO12
6 (152) (Pre)-06-90VO24
9 (228) (Pre)-09-90VO24
12 (305) (Pre)-12-90VO24
27 27 27
24 (609) 18 (457) (Pre)-18-90VO24
(686) (686) (686)
24 (609) (Pre)-24-90VO24
30 (762) (Pre)-30-90VO24
36 (914) (Pre)-36-90VO24
(Pre) See page H-18 for catalog number prefix.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-22 Eaton
Series 1 Steel - Fittings

Vertical Bend 60° (VO, VI)

1 pair splice plates with hardware included.

A C

C
3" (76)

3" (76)
R
B R B
C

C
A

60° Vertical Inside 60° Vertical Outside

60° Vertical Inside Bend (VI)

Bend VI Dimensions [in. (mm)]
Radius Series 14 Steel Series 15 Steel Series 16 Steel Series 17 Steel
R Width
Catalog No.
in. (mm) in. (mm) A B C A B C A B C A B C
6 (152) (Pre)-06-60VI12
9 (228) (Pre)-09-60VI12
12 (305) (Pre)-12-60VI12
18 1/16 107/16 12 181/2 1011/16 123/8 193/8 113/16 1215/16 201/4 11 11/16 131/2
12 (305) 18 (457) (Pre)-18-60VI12
(459) (265) (305) (470) (271) (314) (492) (284) (328) (514) (297) (343)
24 (609) (Pre)-24-60VI12
30 (762) (Pre)-30-60VI12
36 (914) (Pre)-36-60VI12
6 (152) (Pre)-06-60VI24
9 (228) (Pre)-09-60VI24
12 (305) (Pre)-12-60VI24
287/16 167/16 1815/16 2815/16 1811/16 191/4 293/4 173/16 197/8 305/8 1711/16 207/16
24 (609) 18 (457) (Pre)-18-60VI24
(722) (417) (481) (735) (424) (489) (755) (436) (505) (778) (449) (519)
24 (609) (Pre)-24-60VI24
Series 1 Steel

30 (762) (Pre)-30-60VI24
36 (914) (Pre)-36-60VI24

60° Vertical Outside Bend (VO)

Bend VO Dimensions [in. (mm)]
Radius All Series 1
R Width
Catalog No.
in. (mm) in. (mm) A B C
6 (152) (Pre)-06-60VO12
9 (228) (Pre)-09-60VO12
12 (305) (Pre)-12-60VO12
147/8 85/8 915/16
12 (305) 18 (457) (Pre)-18-60VO12
(378) (219) (252)
24 (609) (Pre)-24-60VO12
30 (762) (Pre)-30-60VO12
36 (914) (Pre)-36-60VO12
6 (152) (Pre)-06-60VO24
9 (228) (Pre)-09-60VO24
12 (305) (Pre)-12-60VO24
255/16 145/8 167/8
24 (609) 18 (457) (Pre)-18-60VO24
(643) (371) (428)
24 (609) (Pre)-24-60VO24
30 (762) (Pre)-30-60VO24
36 (914) (Pre)-36-60VO24
(Pre) See page H-18 for catalog number prefix.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-23 B-Line series Cable Tray Systems

Series 1 Steel - Fittings

Vertical Bend 45° (VO, VI)

1 pair splice plates with hardware included.

C
3" (76)

R
C
B
B
C

3" (76)
R
C
A A
45° Vertical Inside 45° Vertical Outside

45° Vertical Inside Bend (VI)

Bend VI Dimensions [in. (mm)]
Radius Series 14 Steel Series 15 Steel Series 16 Steel Series 17 Steel
R Width
Catalog No.
in. (mm) in. (mm) A B C A B C A B C A B C
6 (152) (Pre)-06-45VI12
9 (228) (Pre)-09-45VI12
12 (305) (Pre)-12-45VI12
163/16 611/16 91/2 169/16 67/8 9 11/16 171/4 73/16 10 1/8 18 77/16 109/16
12 (305) 18 (457) (Pre)-18-45VI12
(411) (170) (241) (420) (174) (246) (438) (182) (257) (457) (189) (268)
24 (609) (Pre)-24-45VI12
30 (762) (Pre)-30-45VI12
36 (914) (Pre)-36-45VI12
6 (152) (Pre)-06-45VI24
9 (228) (Pre)-09-45VI24
12 (305) (Pre)-12-45VI24
2411/16 103/16 147/16 251/16 103/8 1411/16 253/4 1011/16 151/16 261/2 11 151/2
24 (609) 18 (457) (Pre)-18-45VI24
(627) (259) (367) (792) (792) (373) (654) (271) (382) (673) (279) (394)
24 (609) (Pre)-24-45VI24

Series 1 Steel
30 (762) (Pre)-30-45VI24
36 (914) (Pre)-36-45VI24

45° Vertical Outside Bend (VO)

Bend VO Dimensions [in. (mm)]
Radius All Series 1
R Width
Catalog No.
in. (mm) in. (mm) A B C
6 (152) (Pre)-06-45VO12
9 (228) (Pre)-09-45VO12
12 (305) (Pre)-12-45VO12
135/8 55/8 8
12 (305) 18 (457) (Pre)-18-45VO12
(346) (143) (203)
24 (609) (Pre)-24-45VO12
30 (762) (Pre)-30-45VO12
36 (914) (Pre)-36-45VO12
6 (152) (Pre)-06-45VO24
9 (228) (Pre)-09-45VO24
12 (305) (Pre)-12-45VO24
221/16 91/8 1215/16
24 (609) 18 (457) (Pre)-18-45VO24
(560) (232) (328)
24 (609) (Pre)-24-45VO24
30 (762) (Pre)-30-45VO24
36 (914) (Pre)-36-45VO24
(Pre) See page H-18 for catalog number prefix.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-24 Eaton
Series 1 Steel - Fittings

Vertical Bend 30° (VO, VI)

1 pair splice plates with hardware included.

C
C
R
3" (76)

3" (76)
B
R
C
C
A A

30° Vertical Inside 30° Vertical Outside

30° Vertical Inside Bend (VI)

Bend VI Dimensions [in. (mm)]
Radius Series 14 Steel Series 15 Steel Series 16 Steel Series 17 Steel
R Width
Catalog No.
in. (mm) in. (mm) A B C A B C A B C A B C
6 (152) (Pre)-06-30VI12
9 (228) (Pre)-09-30VI12
12 (305) (Pre)-12-30VI12
137/16 35/8 73/16 1311/16 311/16 75/16 143/16 313/16 75/8 1411/16 315/16 77/8
12 (305) 18 (457) (Pre)-18-30VI12
(341) (92) (182) (347) (93) (186) (360) (97) (193) (373) (100) (200)
24 (609) (Pre)-24-30VI12
30 (762) (Pre)-30-30VI12
36 (914) (Pre)-36-30VI12
6 (152) (Pre)-06-30VI24
9 (228) (Pre)-09-30VI24
12 (305) (Pre)-12-30VI24
197/16 53/16 10 7/16 1911/16 55/16 109/16 203/16 57/16 1013/16 2011/16 59/16 111/16
24 (609) 18 (457) (Pre)-18-30VI24
(494) (132) (265) (500) (135) (268) (513) (138) (274) (525) (141) (281)
24 (609) (Pre)-24-30VI24
Series 1 Steel

30 (762) (Pre)-30-30VI24
36 (914) (Pre)-36-30VI24

30° Vertical Outside Bend (VO)

Bend VO Dimensions [in. (mm)]
Radius All Series 1
R Width
Catalog No.
in. (mm) in. (mm) A B C
6 (152) (Pre)-06-30VO12
9 (228) (Pre)-09-30VO12
12 (305) (Pre)-12-30VO12
115/8 31/8 63/16
12 (305) 18 (457) (Pre)-18-30VO12
(295) (79) (157)
24 (609) (Pre)-24-30VO12
30 (762) (Pre)-30-30VO12
36 (914) (Pre)-36-30VO12
6 (152) (Pre)-06-30VO24
9 (228) (Pre)-09-30VO24
12 (305) (Pre)-12-30VO24
175/8 411/16 97/16
24 (609) 18 (457) (Pre)-18-30VO24
(448) (119) (240)
24 (609) (Pre)-24-30VO24
30 (762) (Pre)-30-30VO24
36 (914) (Pre)-36-30VO24
(Pre) See page H-18 for catalog number prefix.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-25 B-Line series Cable Tray Systems

Series 1 Steel - Fittings

Vertical Bend Segments (VBS)

Adjustable Vertical Bends are made up of one
or more vertical bend segments and can be used as a
vertical inside (VI) or vertical outside (VO) bend. This
design provides for vertical changes in direction with angles
45˚, 60˚ and 90˚ for 12" (305 mm) or 24" (609 mm) radius.
The chart below shows the number of segments required for the
various combinations of angles and radii. The VBS-1, VBS-2 and
VBS-3 include one, two or three segments respectively with splice
plates and hardware. Holes for setting standard angles are Available for 148P and 148G only.
pre-punched in each segment. Other angles can be set by field
drilling another hole for the locking bolt.

Nominal Dimensions
Bend Catalog VO VI
Radius No. A B R A B R
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

90˚ Vertical Inside or Outside

12 (305) 14(*)†-(‡)-VBS-1 81/4 (210) 81/4 (210) 61/2 (165) 121/8 (303) 121/8 (303) 101/2 (267)
24 (609) 14(*)†-(‡)-VBS-3 24 (610) 24 (610) 221/4 (565) 277/8 (708) 277/8 (708) 261/4 (667)
60˚ Vertical Inside or Outside
12 (305) 14(*)†-(‡)-VBS-1 113/4 (298) 61/2 (165) 12 (305) 143/4 (375) 81/2 (216) 16 (406)
24 (609) 14(*)†-(‡)-VBS-2 113/4 (298) 61/2 (165) 12 (305) 143/4 (375) 81/2 (216) 16 (406)
45˚ Vertical Inside or Outside
12 (305) 14(*)†-(‡)-VBS-1 123/4 (324) 51/4 (133) 171/8 (435) 151/2 (394) 67/8 (175) 21 (540)
24 (609) 14(*)†-(‡)-VBS-1 123/4 (324) 51/4 (133) 171/8 (435) 151/2 (394) 67/8 (175) 21 (540)

Series 1 Steel
Notes:
1. (*) Insert material type: P=Pre Galvanized, G=HDGAF
2. (†) Contact home office for information on
Ventilated Trough and Solid Trough availability
3. (‡) Insert width 6, 9, 12, 18, 24, 30, 36 VBS-1 (1 Segment)
VO A

B R
Fitting Hole Pattern Setting the Angle R B
Angle Settings To find correct angle setting, divide angle of offset
A VI
Pivot Bolt by the number of segments plus one. The result is
equal to the angle setting stamped on the vertical
bend segment and the splice plate. After inserting VBS-2 (2 Segments)
45

30 1 /2
45

30
22 center pivot bolt, align the mark at the end of the A
22 1/2 VO
0
segment or splice plate with the angle and insert
0 221/2 locking bolt in the pre-punched hole.
30 R
22 /2
1 45 Example: 90˚ bend, 24" radius requires 3 segments B B
R
30 221/2
3 segments + 1 = 4 VI
45

90˚ divided by 4 = 221/2 ˚ A

Locking Bolt Center Mark Set all vertical segments at 221/2 ˚
VBS-3 (3 Segments)
A
Offset Dimensions Angle A B A VO
ø in. (mm) in. (mm)
One vertical bend segment R
can be used to complete a 45˚ 12 (305) 81/2 (216) R
B B
vertical offset. Offset 30˚ 14 (355) 53/4 (146) B
ø
dimensions are shown.
221/2˚ 141/4 (362) 5 (127) A
VI

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-26 Eaton

Series 2, 3, 4, & 5 Aluminum - Straight Sections
Series 2, 3, 4, & 5 Aluminum

Eaton I-1 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories

For Aluminum Fittings

see fittings section pages
L-1 thru L-17

How The Service Advisor Works

We know that your time is important! That’s why the color-coding system in this catalog is designed to help you

Series 2, 3, 4, & 5 Aluminum

select products that fit your service needs. Products are marked to indicate the typical lead time for orders of 50
pieces or less.
Customer: How do I select my straight sections. covers, or fittings so that I get the quickest turnaround?
Service Advisor: Each part of our selection chart is shown in colors. If any section of a part number is a different
color, the part will typically ship with the longer lead time represented by the colors.
Green = Fastest shipped items
Black = Normal lead-time items
Red = Normally long lead-time items
Example: 34A VT - 24 - 144 Part will have a normal
lead time because of the
VT bottom type.

B-Line series Cable Tray Systems I-2 Eaton

Series 2, 3, 4, & 5 Aluminum - Straight Sections

3" NEMA VE 1 Loading Depth

4" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 24 A 09 - 24 - 144

Series Material Type Width Length

A = Aluminum Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
24 24
06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
H24 H24
12 = 12" rung spacing 18 = 18" 144 = 12 ft.
24 = 24" ¨ 240 = 20 ft.
¡
34 34
30 = 30" 144 = 12 ft.
36 = 36"
¨Primary
Trough-
Length.
¡Secondary
6" thru 36" wide
Length.
VT = Ventilated Trough
Rung ST = Non-Ventilated Trough See page C-23 for
Spacing
explanation of lengths.
Width
(Inside)
For side
Overall Width rail data, see
(Width + 11/2") charts on pages
APP-6 & APP-7

See page APP-1 for additional rung options. *Special sizes available.
Series 2, 3, 4, & 5 Aluminum

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-3 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Straight Sections

3" NEMA VE 1 Loading Depth

4" Side Rail Height

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above
the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.75 NEMA: 16A, 12C 6 487* 0.001 1.8 725* 0.017
CSA: 277 kg/m 3.0m 8 284 0.003 Area = 1.05 in2 2.4 422 0.055 Area = 6.77 cm2
24 3.05
D-3m 10 181 0.008 Sx = 1.34 in3 3.0 270 0.136 Sx = 21.96 cm3
4.12
UL Cross-Sectional 12 126 0.016 Ix = 2.85 in4 3.7 187 0.279 Ix = 118.63 cm4
Area: 1.00 in2 14 93 0.030 4.3 138 0.618
16 71 0.052 4.9 105 0.883
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment
of Inertia, Sx = Section Modulus.
* When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.27 kg/m) for 30" tray width and 325 lbs/ft (483.6 kg/m) for
36" tray width.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.75 NEMA: 20A 10 225 0.006 3.0 330 0.106
CSA: 84 kg/m 6.1m 12 156 0.013 Area = 1.32 in2 3.7 226 0.222 Area = 8.52 cm2
H24 2.98
D-6m 14 115 0.023 Sx = 1.57 in3 4.3 171 0.400 Sx = 25.73 cm3
4.19
UL Cross-Sectional 16 88 0.040 Ix = 3.69 in4 4.9 129 0.693 Ix = 153.59 cm4
Area: 1.00 in2 18 70 0.064 5.5 103 1.093
20 56 0.098 6.1 83 1.682
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment
of Inertia, Sx = Section Modulus.

Series 2, 3, 4, & 5 Aluminum

1.75 NEMA: 20B, 16C 10 320 0.005 3.0 476 0.077
CSA: 112 kg/m 6.0m 12 222 0.009 Area = 1.82 in2 3.7 331 0.160 Area = 11.74 cm2
34 3.08
E-6m 14 163 0.017 Sx = 2.10 in3 4.3 243 0.296 Sx = 34.41 cm3
4.20
UL Cross-Sectional 16 125 0.030 Ix = 4.98 in4 4.9 186 0.505 Ix = 207.28 cm4
Area: 1.50 in2 18 99 0.047 5.5 147 0.810
20 80 0.072 6.1 119 1.234
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment
of Inertia, Sx = Section Modulus.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-4 Eaton

Series 2, 3, 4, & 5 Aluminum - Straight Sections

4" NEMA VE 1 Loading Depth

5" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 25 A 09 - 24 - 144

Series Material Type Width Length

A = Aluminum Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
25 25
06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
35 35
12 = 12" rung spacing 18 = 18" 144 = 12 ft.
24 = 24"
30 = 30"
36 = 36"
¨Primary
Trough-
Length.
¡Secondary
6" thru 36" wide
Length.
VT = Ventilated Trough
Rung ST = Non-Ventilated Trough See page C-23 for
Spacing
explanation of lengths.
Width
(Inside)
For side
Overall Width rail data, see
(Width + 11/2") charts on pages
APP-6 & APP-7

See page APP-1 for additional rung options. *Special sizes available.
Series 2, 3, 4, & 5 Aluminum

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-5 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Straight Sections

4" NEMA VE 1 Loading Depth

5" Side Rail Height

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.75 NEMA: 20A, 12C 10 200 0.0049 3.0 298 0.083
CSA: 67 kg/m 6.0m 12 139 0.010 Area = 1.24 in2 3.7 207 0.172 Area = 8.00 cm2
25 3.93
D-6m 14 102 0.019 Sx = 1.80 in3 4.3 152 0.319 Sx = 29.50 cm3
5.00
UL Cross-Sectional 16 78 0.032 Ix = 4.62 in4 4.9 116 0.545 Ix = 192.30 cm4
Area: 1.00 in2 18 62 0.051 5.5 92 0.873
20 50 0.078 6.1 74 1.330
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment
of Inertia, Sx = Section Modulus.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.75 NEMA: 20B, 16C 10 310 0.0036 3.0 461 0.060
CSA: 112 kg/m 6.0m 12 215 0.0073 Area = 1.67 in2 3.7 320 0.125 Area = 10.77 cm2
35 3.96
E-6m 14 158 0.014 Sx = 2.35 in3 4.3 235 0.232 Sx = 38.51 cm3
5.06
UL Cross-Sectional 16 121 0.023 Ix = 6.37 in4 4.9 180 0.395 Ix = 265.14 cm4
Area: 1.50 in2 18 96 0.037 5.5 142 0.633
20 77 0.057 6.1 115 0.965
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment
of Inertia, Sx = Section Modulus.

Series 2, 3, 4, & 5 Aluminum

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-6 Eaton

Series 2, 3, 4, & 5 Aluminum - Straight Sections

5" NEMA VE 1 Loading Depth

6" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 26 A 09 - 24 - 144

Series Material Type Width Length

A = Aluminum Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
26 26
06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
36 36
12 = 12" rung spacing 18 = 18" 144 = 12 ft.
24 = 24" ¨ 240 = 20 ft.
¡
46 46
30 = 30" 288 = 24 ft.
36 = 36" ¨ 240 = 20 ft.
¡
H46 H46
42 = 42"† 300 = 25 ft.
48 = 48"† ¨ 240 = 20 ft.
¡
56
288 = 24 ft.
¡
57
Trough- † For 56A only 300 = 25 ft.
6" thru 36" wide ¡ 360 = 30 ft.
Rung
VT = Ventilated Trough
Spacing
ST = Non-Ventilated Trough
Width
(Inside) ¨Primary Length.
¡Secondary
For side
Overall Width
(Width + 11/2")
rail data, see
charts on pages Length.
APP-6 & APP-7

See page C-23 for

See page APP-1 for additional rung options. *Special sizes available. explanation of lengths.
Series 2, 3, 4, & 5 Aluminum

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-7 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Straight Sections
5" NEMA VE 1 Loading Depth
6" Side Rail Height
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support, without collapse, a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.
Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above
the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
2.00 NEMA: 20A, 16B 10 204 0.0028 3.0 304 0.049
CSA: 67 kg/m 6.0m 12 142 0.006 Area = 1.41 in2 3.7 211 0.101 Area = 9.10 cm2
26 5.04
D-6m 14 104 0.011 Sx = 2.53 in3 4.3 155 0.186 Sx = 41.46 cm3
6.12
UL Cross-Sectional 16 80 0.019 Ix = 7.915 in4 4.9 119 0.318 Ix = 329.45 cm4
Area: 1.00 in2 18 63 0.030 5.5 94 0.509
20 51 0.045 6.1 76 0.776
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
2.00 NEMA: 20B, 16C 12 233 0.0043 3.7 347 0.073
CSA: 112 kg/m 6.0m 14 171 0.008 Area = 1.81 in2 4.3 255 0.136 Area = 11.68 cm2
36 5.06
E-6m 16 131 0.014 Sx = 3.36 in3 4.9 195 0.232 Sx = 55.06 cm3
6.17
UL Cross-Sectional 18 104 0.022 Ix = 10.85 in4 5.5 154 0.372 Ix = 451.61 cm4
Area: 1.50 in2 20 84 0.033 6.1 125 0.566
22 69 0.049 6.7 103 0.829
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
2.00
NEMA: 20C 14 210 0.0071 4.3 313 0.121
CSA: 168 kg/m 6.1m 16 161 0.012 Area = 2.06 in2 4.9 239 0.207 Area = 13.29 cm2
46 5.08
E-6m 18 127 0.019 Sx = 3.59 in3 5.5 189 0.331 Sx = 58.83 cm3
6.19
UL Cross-Sectional 20 103 0.030 Ix = 12.18 in4 6.1 153 0.505 Ix = 506.97 cm4
Area: 1.50 in2 22 85 0.043 6.7 127 0.739
24 72 0.061 7.3 106 1.046
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

Series 2, 3, 4, & 5 Aluminum

2.00
NEMA: 20C+ 16 261 0.0085 4.9 388 0.145
CSA: 131 kg/m 7.6m 18 206 0.014 Area = 2.95 in2 5.5 307 0.233 Area = 19.03 cm2
H46 5.09
E-6m 20 167 0.021 Sx = 5.33 in3 6.1 248 0.355 Sx = 87.34 cm3
6.24
UL Cross-Sectional 22 138 0.030 Ix = 17.30 in4 6.7 205 0.520 Ix = 720.08 cm4
Area: 2.00 in2 24 116 0.043 7.3 173 0.737
25 88 0.051 7.6 131 0.867
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
2.12
NEMA: 20C+ 20 169 0.016 6.1 251 0.272
CSA: 112 kg/m 9.1m 22 139 0.023 Area = 3.63 in2 6.7 208 0.398 Area = 23.42 cm2
56 5.26
E-6m 24 117 0.033 Sx = 6.12 in3 7.3 174 0.563 Sx = 100.29 cm3
6.43
UL Cross-Sectional 26 100 0.045 Ix = 22.63 in4 7.9 149 0.776 Ix = 941.86 cm4
Area: 2.00 in2 28 86 0.061 8.5 128 1.043
30 75 0.081 9.1 112 1.375
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-8 Eaton

Series 2, 3, 4, & 5 Aluminum - Straight Sections
6" NEMA VE 1 Loading Depth
7" Side Rail Height
Straight Section Part Numbering
Prefix
Example: 37 A 09 - 24 - 144

Series Material Type Width Length

A = Aluminum Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
27 27
06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
37 37
12 = 12" rung spacing 18 = 18" 144 = 12 ft.
24 = 24" ¨ 240 = 20 ft.
¡
47 47
30 = 30" 288 = 24 ft.
36 = 36" ¨ 240 = 20 ft.
¡
H47† H47
300 = 25 ft.
¨ 360 = 30 ft.
¡
57 57
Trough- 300 = 25 ft.
6" thru 36" wide
VT = Ventilated Trough ¨Primary Length.
Rung ST = Non-Ventilated Trough ¡Secondary Length.
Spacing

† H47A & 57A only available in ladder See page C-23 for
Width
(Inside) type 9” and 12” rung spacing. explanation of lengths.
For side
Overall Width rail data, see
(Width + 11/2") charts on pages See page APP-2.
APP-6 & APP-7

See page APP-1 for additional rung options. *Special sizes available.
Series 2, 3, 4, & 5 Aluminum

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

57A available in
(9” & 12” rung spacing in
12” to 36” widths)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-9 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Straight Sections

6" NEMA VE 1 Loading Depth

7" Side Rail Height
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the
deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

Series 2, 3, 4, & 5 Aluminum

CSA: 241 kg/m 6.1m 18 184 0.010 Area = 3.04 in2 5.4 274 0.176 Area = 19.61 cm2
H47 6.09
E-6m 20 149 0.016 Sx = 6.10 in3 6.1 222 0.268 Sx = 99.96 cm3
7.24
UL Cross-Sectional 22 123 0.023 Ix = 22.91 in4 6.7 183 0.393 Ix = 953.59 cm4
Area: 2.00 in2 24 103 0.033 7.3 154 0.556
25 95 0.038 7.6 142 0.655

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
2.00
NEMA: 20C+ 20 232 0.011 6.1 345 0.187
CSA: 151 kg/m 9.1m 22 192 0.016 Area = 4.22 in2 6.7 285 0.274 Area = 27.73 cm2
57 6.23
E-6m 24 161 0.023 Sx = 7.73 in3 7.3 240 0.388 Sx = 126.67 cm3
7.40
UL Cross-Sectional 26 136 0.031 Ix = 32.86 in4 7.9 202 0.534 Ix = 1367.74 cm4
Area: 2.00 in2 28 117 0.042 8.5 174 0.718
30 102 0.055 9.1 152 0.947
When trays are used in continuous spans, the deflection of the tray is reduced by as much as 50%. Design factors: Ix = Moment
of Inertia, Sx = Section Modulus.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-10 Eaton

Series 2, 3, 4, & 5 Aluminum - Straight Sections

6" NEMA VE 1 Loading Depth

8" Side Rail Height

Straight Section Part Numbering

Prefix
Example: S8 A 09 - 24 - 480

Series Material Type Width Length

S8 A = Aluminum Ladder- 12 = 12" 480 = 40 ft.
09 = 9" rung spacing 18 = 18" ¨ 360 = 30 ft.

12 = 12" rung spacing 24 = 24" ¡ 300 = 25 ft.

30 = 30"
36 = 36"
¨Primary Length.
¡Secondary Length.

See page C-23 for

explanation of lengths.
See page APP-1 for additional rung options. *Special sizes available.

Rung
Spacing

Width
(Inside)
For side
Overall Width rail data, see
(Width + 2.0") charts on pages
APP-6 & APP-7

* Alternated rung
unless indicated.

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
Series 2, 3, 4, & 5 Aluminum

support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the
deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.
Individual rungs will support without collapse a 200 lb. (90.7 kg) concentrated load applied at the mid-span of the rung, over and above
the NEMA rated cable load with a 1.5 safety factor for highlighted NEMA spans and loads.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
3.00 NEMA: 20C+ 20 363 0.007 6.1 540 0.111
CSA: 240 kg/m 9.1m 22 300 0.010 6.7 446 0.163
24 252 0.013 Area=5.50 in2 7.3 375 0.230 Area=35.48 cm2
S8A 6.175
8.00 UL Cross-Sectional 26 215 0.019 Sx=15.39 in3 7.9 320 0.317 Sx=252.20 cm3
Area: 2.00 in2 28 185 0.025 Ix=55.35 in4 8.5 276 0.427 Ix=2303.84 cm4
30 161 0.033 9.1 240 0.562
40 101 0.146 12.2 151 2.488

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-11 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories

The following is a list of accessories and fittings that can be provided with S8A tray.
For more information on these items, contact our Engineering Department.

Fittings
Horizontal Bends
30° Bends with 24”, 36”, or 48” radius
45° Bends with 24”, 36”, or 48” radius
60° Bends with 24”, 36”, or 48” radius
90° Bends with 24”, 36”, or 48” radius

Horizontal Tees & Crosses

With 24”, 36”, or 48” radius

Vertical Outside Bends

30° Bends with 24”, 36”, or 48” radius
45° Bends with 24”, 36”, or 48” radius
60° Bends with 24”, 36”, or 48” radius
90° Bends with 24”, 36”, or 48” radius

Vertical Inside Bends

30° Bends with 24”, 36”, or 48” radius
45° Bends with 24”, 36”, or 48” radius
60° Bends with 24”, 36”, or 48” radius
90° Bends with 24”, 36”, or 48” radius

Reducing Fittings

Accessories - (standard hardware is stainless steel Type 316)

Splice Plate - 9A-1008
Expansion Splice Plate - 9A-1018
Horizontal Adjustable Splice Plate - 9A-1038
Vertical Adjustable Splice Plate - 9A-1028

Series 2, 3, 4, & 5 Aluminum

Hold Down Clamps - 9ZN-1281, 9G-1281, 9A-1281
Guides - S9ZN-1202, S9G-1202
Step Down Splice Plate -
9A-1048 = 8” to 4”
9A-1051 = 8” to 5”
9A-1050 = 8” to 6”
9A-1078 = 8” to 7”
Other Accessories Include:
Offset Splice Plates
Blind Ends
Covers - Standard aluminum cover number with S in front (Example: S807A40)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-12 Eaton

Series 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates
• Furnished in pairs with 3/8" hardware. Catalog No. Height
• Standard 4-hole pattern. in. mm
• Furnished in pairs, with hardware.
9A-1004 4 (101)
• One pair including hardware provided with each section.
9A-1005 5 (127)
(Expansion splice quantity subtracted)
• Boxed in pairs with hardware. 9A-1006 6 (152)
9A-1007 7 (178)
• For field installation drill 13/32" hole.

H46A, H47A and 57A Mid-Span Splice

• Furnished in pairs with 3/8" hardware.
• Standard for H46A, H47A and 57A straight sections.
• Six bolt design 1/2" Stainless Steel Type 316 Catalog No. Tray
hardware standard. Series
• Available on ladder bottoms only. 09 and 12" rung spacing.
9A-6006 H46A
• Furnished in pairs with hardware.
9A-6007 H47A, 57A

Expansion Splice Plates

• Expansion plates allow for one inch expansion or contraction
of the cable tray, or where expansion joints occur in the Catalog No. Height
supporting structure. in. mm
• Furnished in pairs with hardware. 9A-1014 4 (101)
• Bonding Jumpers are required on each siderail. 9A-1015 5 (127)
Order Separately.
9A-1016 6 (152)
For heavy duty expansion splice plates see page APP-3. 9A-1017 7 (178)

Universal Splice Plates

• Furnished in pairs with 3/8" hardware.
Catalog No. Height
• UL Classified. in. mm

9A-1004-1/2 4 (101)
9A-1005-1/2 5 (127)
9A-1006-1/2 6 (152)
9A-1007-1/2 7 (178)

Step Down Splice Plates Catalog No. Height

• These splice plates are offered for connecting cable in. mm
tray sections having side rails of different heights. 9A-1045 5 to 4 (127 to 101)
Series 2, 3, 4, & 5 Aluminum

• Furnished in pairs with hardware. 9A-1046 6 to 4 (152 to 101)

9A-1060 6 to 5 (152 to 127)
9A-1047 7 to 4 (178 to 101)
Requires supports within 24” on 9A-1061 7 to 5 (178 to 127)
both sides, per NEMA VE 2. 9A-1062 7 to 6 (178 to 152)

Vertical Adjustable Splice Plates

• These plates provide for changes in elevation that
Catalog No. Height
do not conform to standard vertical fittings. in. mm
• Furnished in pairs with hardware.
9A-1024 4 (101)
• Bonding Jumpers not required.
9A-1025 5 (127)
9A-1026 6 (152)
9A-1027 7 (178)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-13 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories
Horizontal Adjustable Splice Plates L
• Offered to adjust a cable tray run for changes in L
direction in a horizontal plane that do not conform
to standard horizontal fittings.
• Furnished in pairs with hardware. 9A-103(X)
Splice only
• Bonding jumpers not required. 9A-103(X)-12 or 9A-103(X)-36
One pair splice plates with extensions.
• (X) Insert 4, 5, 6 or 7 for side rail height.
Catalog Cable Tray Thru Tray Width ‘L’
No. End Cut in. (mm) in. (mm)

Requires supports within 24” on 9A-103(X) Mitered 36 (914) N/A (NA)

both sides, per NEMA VE 2. 9A-103(X)-12 Not mitered 12 (305) 16 (406)
9A-103(X)-36 Not mitered 36 (914) 41 (1041)

Branch Pivot Connectors

• Branch from existing cable tray runs at any point.
• Pivot to any required angle. Catalog No. Height
• UL Classified for grounding in. mm
(bonding jumpers not required). 9A-2044 4 (101)
• Furnished in pairs with hardware. 9A-2045 5 (127)
9A-2046 6 (152)
9A-2047 7 (178)

Offset Reducing Splice Plate

Catalog No. Height
• This plate is used for joining cable trays having different widths. in. mm
When used in pairs they form a straight reduction; when used
9A-1064-(‡) 4 (101)
singly with a standard splice plate, they form an offset reduction.
• Furnished as one plate with hardware. 9A-1065-(‡) 5 (127)
• (‡) Insert reduction 9A-1066-(‡) 6 (152)
9A-1067-(‡) 7 (178)

Tray to Box Splice Plates

• Used to attach the end of a cable tray run to a distribution Catalog No. Height
in. mm
box or control panel.
• Furnished in pairs with hardware 9A-1054 4 (101)
9A-1055 5 (127)
9A-1056 6 (152)
9A-1057 7 (178)

Frame Type Box Connector

Series 2, 3, 4, & 5 Aluminum

Catalog No. Height
• Designed to attach the end of a cable tray run to a distribution in. mm
cabinet or control center to help reinforce the box at the
point of entry. 9A-1074-(‡) 4 (101)
9A-1075-(‡) 5 (127)
• Furnished with tray connection hardware.
9A-1076-(‡) 6 (152)
9A-1077-(‡) 7 (178)

Blind End
• This plate forms a closure for a dead end cable tray. Catalog No. Height
in. mm
• Furnished as one plate with hardware.
• (‡) Insert tray width 9A-1084-(‡) 4 (101)
9A-1085-(‡) 5 (127)
9A-1086-(‡) 6 (152)
9A-1087-(‡) 7 (178)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-14 Eaton

Series 2, 3, 4, & 5 Aluminum - Accessories
Standard Tray Hardware (for field installation drill 13/32” hole)
• Finish: Zinc Plated ASTM B633 SC1 Catalog No. Description
SNCB 3/8” x 3/4” ZN Square Neck Carriage Bolt ASTM A307 Grade A
SFHN 3/8”-16 ZN Serrated Flange Hex Nut ASTM A563 Grade A

Optional Tray Hardware (for field installation drill 13/32” hole)

• To order 316 stainless steel hardware
add SS6 suffix to catalog number -
Example: 9A1004SS6 Catalog No. Description
SNCB 3/8” x 3/4” SS6 Square Neck Carriage Bolt AISI 316 Stainless Steel
SFHN 3/8”-16 SS6 Serrated Flange Hex Nut AISI 316 Stainless Steel

Cross Connector Bracket

• For field connecting crossing section.
• Furnished in pairs with 3/8" hardware.

Catalog No.
9A-1240

Conduit to Cable Tray Adaptor

Catalog No. Conduit Size
• For easy attachment of conduit terminating in. mm
at a cable tray. 9G-1158-1/2, 3/2 1/2, 3/4 (15, 20)
• Use on aluminum or steel cable trays. 9G-1158-1, 11/4 1, 11/4 (25, 32)
Aluminum 9G-1158-11/2, 2 11/2, 2 (40, 50)
I-Beam 9G-1158-21/2, 3 21/2, 3 (65, 80)
9G-1158-31/2, 4 31/2, 4 (90, 100)

Conduit to Cable Tray Adaptor

• Assembly required.
• Mounting hardware included.
• Conduit clamps provided.
Catalog No.
• (‡) = Insert conduit size (1/2" thru 4").
9ZN-1150-(‡)

Conduit to Cable Tray Adaptor

Series 2, 3, 4, & 5 Aluminum

• Assembly required.
• Conduit clamps included.
• (‡) = Insert conduit size (1/2" thru 4").
Catalog No.
9ZN-1155-(‡)

Cable Tie (Ladder Tray)

• Nylon ties provide easy attachment of cable to ladder
rungs; maximum cable O.D. is 3" (76mm).
Overall Length 15" (381mm)

Catalog No.
99-2125-15

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-15 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories
Ladder Drop-Out
• Specially-designed Ladder Drop-Outs provide a rounded
surface with 4" (101 mm) radius to protect cable as it exits
from the cable tray, preventing damage to insulation.
The drop-out will attach to any desired rung.
• (‡) Insert tray width Catalog No.
9A-1104-(‡)

Trough Drop-Out & Drop-Out Bushing

• These devices provide a rounded surface to protect cable
as it exits from the trough-type cable tray.
• Hardware is included for attachment of the trough
bottom drop-out.
• (‡) Insert tray width Trough-Type Drop-Out Snap-In Plastic Bushing
Catalog No. Catalog No.
9A-1104T-(‡) 99-1124

Barrier - Straight Section

Catalog Side Rail Loading
• Length: Insert 120 for [120” - 10 ft.] (3.0 m)
No. Height Depth 'H'
or 144 for [144" - 12 ft.] (3.6 m) in. mm in. mm
• Order catalog number based on loading depth.
73A-Length 4 (101) 3 (76)
• Furnished with four #10 x 1/2" plated
74A-Length 5 (127) 4 (101)
self-drilling screws and a 99-9982 Barrier Strip Splice.
75A-Length 6 (152) 5 (127)
H
76A-Length 7 (178) 6 (152)

Barrier - Horizontal Bend

Catalog Side Rail Loading
• Horizontal Bend Barriers are flexible in order
No. Height Depth 'H'
to conform to any horizontal fitting radius.
in. mm in. mm
Can be cut to desired length.
73A-90HBFL 4 (101) 3 (76)
• Standard length is 72" [6 ft.] (1.8 m) - sold individually
• Order catalog number based on loading depth. 74A-90HBFL 5 (127) 4 (101)
• Furnished with three #10 x 1/2" plated
H 75A-90HBFL 6 (152) 5 (127)
self-drilling screws and a 99-9982 Barrier Strip Splice. 76A-90HBFL 7 (178) 6 (152)

Barrier - Vertical Outside Bend

Series 2, 3, 4, & 5 Aluminum

• (*) Insert 30, 45, 60 or 90 for degrees Outside Bend 73A-(*)VO(†) 4 (101) 3 (76)
• (†) Insert 12, 24, 36 or 48 for radius (VO) 74A-(*)VO(†) 5 (127) 4 (101)
75A-(*)VO(†) 6 (152) 5 (127)
76A-(*)VO(†) 7 (178) 6 (152)

Barrier - Vertical Inside Bend

• Vertical Inside Bend Barriers are preformed to conform
to a specific vertical inside bend fitting. Catalog Side Rail Loading
• Furnished with three #10 x 1/2" plated self-drilling No. Height Depth 'H'
in. mm in. mm
screws and a 99-9982 Barrier Strip Splice.
• (*) Insert 30, 45, 60 or 90 for degrees 73A-(*)VI(†) 4 (101) 3 (76)
• (†) Insert 12, 24, 36 or 48 for radius 74A-(*)VI(†) 5 (127) 4 (101)
Inside Bend 75A-(*)VI(†) 6 (152) 5 (127)
H
(VI) 76A-(*)VI(†) 7 (178) 6 (152)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-16 Eaton

Series 2, 3, 4, & 5 Aluminum - Accessories
Barrier Strip Clip Barrier
• Provides attachment to rung. Flange

• Allows for installed barrier adjustment.

• Asymmetrical clip provides a wide range for
screw location.
• Barriers strip clips not included with Rung
barriers. (Must be ordered separately) Catalog No.
Screw slot for 9A-RBC
sheet metal screw

Barrier Strip Splice

Bonding Jumper
Use at each expansion splice and where the cable tray
is not mechanically/electrically continuous to ground.
Sold individually.
• Hardware included.
• See table 392.6(B)(2) on page CTS-9 for amperage ratings Catalog No. Copper Wire Size Ampacity
required to match the UL cross-sectional area of the tray. 99-N1 #1 600
• See tray loading chart for UL cross-sectional area. 99-40 4/0 1600
• Bonding jumper is 141/2" (368mm) long. 99-1620 250 MCM 2000

Grounding Clamp
Eaton’s B-Line series cable tray is UL® classified as to its
suitability as an equipment grounding conductor. If a separate
conductor for additional grounding capability is desired, B-Line
offers this clamp for bolting the conductor at least once to each
cable tray section. Catalog No. Material
• Accepts #6 AWG to 250 MCM. 9A-2130 Tin Plated Aluminum

Ground Wire Clamp

• Mechanically attaches grounding cables to cable tray.
• Hardware included. Catalog No. Material
Series 2, 3, 4, & 5 Aluminum

• () Insert ZN or SS4 9()-2351 #1 thru 2/0

9(*(-2352 3/0 thru 250 MCM

Thread Rod (ATR) & Rod Couplings

Size Catalog No. Available Length Loading
Loading based on safety factor 5.
All Threaded Rod
Standard Finish: Zinc plated
See B-Line series Strut Systems
3/8"-16 ATR 3/8" x Length 36", 72", 120", 144" 730 lbs.
Catalog for other sizes and finishes. 1/2"-13 ATR 1/2" x Length 36", 72", 120", 144" 1350 lbs.
Rod Coupling
3/8"-16 B655-3/8" NA 730 lbs.
B655 ATR 1/2"-13 B655-1/2" NA 1350 lbs.
Rod Coupling All Threaded Rod

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-17 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories
Stainless Steel Cable Clamp ‘P’
Catalog No. Cable Size
• Fits with series 2, 3, & 4 rungs. in. mm
• Attaches to rung at any point.
• 14 gauge Type 316 stainless steel material to minimize BP081SS .250 - .840 (6.4 - 21.3)
corrosion and induction heating. BP110SS .810 - 1.100 (20.6 - 28.0)
• Plated steel and aluminum also available. BP135SS .850 - 1.350 (21.6 - 34.8)
BP175SS 1.250 - 1.750 (31.8 - 44.5)
BP205SS 1.550 - 2.050 (39.4 - 52.1)
BP250SS 2.000 - 2.500 (50.8 - 63.5)
BP300SS 2.500 - 3.000 (63.5 - 76.2)
BP325SS 2.750 - 3.250 (69.9 - 82.6)
Refer to Section CF BP375SS 3.250 - 3.750 (82.6 - 95.3)
Cable Fixing
BP425SS 3.750 - 4.250 (95.3 - 108.0)
BP475SS 4.250 - 4.750 (108.0 - 120.7)

Hanger Rod Clamp

• For 1/2" ATR.
• Furnished in pairs.
• Order ATR and hex nuts separately. Catalog No. Height
• Two-piece "J"-hanger design. in. mm
• 1350 lbs./pair capacity. 9(*)-5324 4 (101)
• (*) Insert ZN or G 9(*)-5325 5 (127)
9(*)-5326 6 (152)
9(*)-5327 7 (178)

Cable Tray Clamp/Guide

• Features a no-twist design.
• Has four times the strength of the traditional design.
• Each side is labeled to ensure proper installation. Note: For heavy duty or vertical applications
• Furnished in pairs, with or without hardware. see 9(*)-1241 or 9(*)-1242 page HAT-20
• Not recommended for vertical support.
Catalog No.
Patent # RE35479 Without With Overall Hardware
Hardware Hardware Length Size Finish
in. (mm) in.
9ZN-1204 9ZN-1204NB 11/2 (38) 1/4" G90
9ZN-1208 9ZN-1208NB 21/4 (57) 3/8" G90
9A-1205 -- 21/4 (57) 1/2" Alum.
9G-1205 -- 21/4 (57) 1/2" HDGAF
11/2" 21/4" 9SS6-1205 -- 21/4 (57) 1/2" 316SS
(39mm) (57mm) 9ZN-1208 shown. 21/4 1/2"

Series 2, 3, 4, & 5 Aluminum

9ZN-1204 shown. 9ZN-1205 -- (57) G90
Installed as a guide. Installed as a clamp.

Isolator Pad
• Use as a friction reducer and/or as
a dissimilar metal isolator barrier.
• UV resistant HDPE.
• Temperature range: -100 to 160° F.
• Designed to use with 9(*)-1205 or
9(*)-1208 clamp/guide.
• Color - White.
• Patent Pending Isolator pad shown
when used with a guide.
Catalog No.
Isolator pad shown 99-PE34
when used with a clamp.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-18 Eaton

Series 2, 3, 4, & 5 Aluminum - Accessories
Combination Hold Down Guide Clamp
• Concentric hole location for ease of installation.
• Material: 6063-T6 Copper Free Aluminum.
• Allows for predrilled I-Beam locations.
• Designed for multiple support methods.
• No twist feature compatible with strut profile.
• Visual indicators for proper assembly.
• Compatible with aluminum and steel side rails.
Shown on strut
Catalog No.
as a guide Shown on strut
as a clamp 9A-1206

Cable Tray Clamp

• Hold-down clamps for single or double cable tray runs.
• No drilling of support I-beam or channel is required.
• Sold in pieces - two clamps are required per tray.
• Maximum beam flange thickness 11/8" (28.58 mm). Catalog No. Finish
9ZN-1249HD Znplt
9G-1249HD HDGAF

Cable Tray Guide

• Expansion guide for single or double cable tray runs.
• Guide allows for longitudinal movement of the cable tray.
• No field drilling of support I-beam or channel is required.
• Guides are required on both sides of cable tray to prevent
lateral movement - can be placed on either the inside or
outside flange of cable tray. Catalog No. Finish
• Guides are sold in pieces - two guides are required per tray. 9ZN-1249 Znplt
• Maximum flange thickness 11/8" (28.58 mm). 9G-1249 HDGAF

Nylon Pad 1/8"

Neoprene Roll
• Use for friction reduction. (3mm) • Use for material isolation.
• Hardness: Shore D80. • 1/8" x 2" x 25' roll.
• Low friction coefficient. • Hardness: Shore A60.
• UV resistant. 6" • Good weatherability.
(152mm)
• Excellent weatherability. 3"
• UL - 94HB. (76mm)

Catalog No. Catalog No.

99-PE36 99-NP300
Series 2, 3, 4, & 5 Aluminum

DURA-BLOK™ Rooftop Support Bases with B22 Channel

• Designed as a superior rooftop support
for cable tray, Catalog No. Height x Width x Length
• UV resistant and approved for most in. (mm)
roofing material or other flat surfaces.
DB10-28 55/8 x 6 x 28.0 (143 x 152 x 711)
• Can be used with any of B-Line series cable
DB10-36 55/8 x 6 x 36.0 (143 x 152 x 914)
tray clamps and guides.
DB10-42 55/8 x 6 x 42.0 (143 x 152 x 1067)
• Ultimate Load Capacity:
1,000 lbs. (uniform load) DB10-50 55/8 x 6 x 50.0 (143 x 152 x 1270)
DB10-60 55/8 x 6 x 60.0 (143 x 152 x 1524)

LEEDS credit available, base made from 100% recycled material.

General Note: Consult roofing manufacturer or engineer for roof load

capacity. The weakest point may be the insulation board beneath
the rubber membrane.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-19 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories
Trapeze Support Kit
• Eaton’s B-Line series trapeze kits provide the components
required for a single trapeze support in one package. These kits
are available in pre-galvanized steel with zinc-plated hardware, hot
dip galvanized steel with 316 stainless steel hardware, or
DURA GREEN™ painted steel with zinc-plated hardware.
• The SH channel provides the convenience of pre-punched
slots, which eliminate the need for field drilling.
Catalog Tray Channel Uniform
• The illustrated hardware is sealed in a plastic bag and boxed No. Width Length Load
with the channel, which is pre-cut to the appropriate length in. mm in. mm lbs kN
as shown in the chart. (2) 1/2" x 7/8" Hex 9(*)-5506-22SH(†) 6 (152) 16 (406) 1350 (6.00)
• Designed for use with Head Cap Screw
1/2" threaded rod. (2) 9ZN-1205 9(*)-5509-22SH(†) 9 (229) 18 (457) 1250 (5.56)
Hold-Down Guide Clamp
Order rod separately. 9(*)-5512-22SH(†) 12 (305) 22 (559) 1125 (5.00)
(4) 1/2" Hex Nut 9(*)-5518-22SH(†) 18 (457) 28 (711) 865 (3.85)
(2) N525WO
Channel Nut (4) B202
9(*)-5524-22SH(†) 24 (610) 34 (864) 700 (3.11)
Square Washer 9(*)-5530-22SH(†) 30 (762) 40 (1016) 590 (2.62)
9(*)-5536-22SH(†) 36 (914) 46 (1168) 510 (2.27)
9(*)-5542-22SH(†) 42 (1067) 52 (1321) 450 (2.00)
(1) B22 Channel cut
to the required length • (*) Insert P G or GRN
• (†) Insert 3/8 for 3/8" threaded rod hardware.
Safety factor of 3.0 on all loads.

Heavy Duty Trapeze Support Kit

• Eaton’s B-Line series trapeze kits provide the components required
for a single trapeze support in one package. These kits are
available in pre-galvanized steel with zinc-plated hardware, hot
dip galvanized steel with 316 stainless steel hardware, or
DURA GREEN™ painted steel with zinc-plated hardware.
• The SH channel provides the convenience of pre-punched slots, Catalog Tray Channel Uniform
which eliminates the need for field drilling. No. Width Length Load
(2) 9ZN-1205
• The illustrated hardware is sealed in. mm in. mm lbs kN
Hold-Down Guide Clamp
in a plastic bag and boxed with the 9(*)-5506-22SHA 6 (152) 16 (406) 1350 (6.00)
channel, which is pre-cut to the (2) N525WO
9(*)-5509-22SHA 9 (229) 18 (457) 1350 (6.00)
appropriate length as shown Channel Nut
9(*)-5512-22SHA 12 (305) 22 (559) 1350 (6.00)
in the chart.
• Designed for use with 9(*)-5518-22SHA 18 (457) 28 (711) 1350 (6.00)
1/2" threaded rod. 9(*)-5524-22SHA 24 (610) 34 (864) 1350 (6.00)
Order rod separately. 9(*)-5530-22SHA 30 (762) 40 (1016) 1350 (6.00)
(2)1/2"
x 7/8"
Hex 9(*)-5536-22SHA 36 (914) 46 (1168) 1350 (6.00)
Head Cap Screw 9(*)-5542-22SHA 42 (1067) 52 (1321) 1350 (6.00)

Series 2, 3, 4, & 5 Aluminum

(1) B22 Channel cut to
the required length • (*) Insert P G or GRN
(4) B202 Square Washer Safety factor of 3.0 on all loads.
(4) 1/2" Hex Nut

Trapeze Hardware Kit

Catalog No. 9ZN-5500-1/2 9G-5500-1/2

1 pr. 9ZN-1205 1 pr. 9G-1205
2 HHC Screw 1/2 x 7/8 ZN 2 HHC Screw 1/2 x 7/8 SS6
In plastic bag 2 N525 WO ZN 2 N525 WO SS6
4 B202 ZN 1/2" sq washer 4 B202 HDG 1/2" sq washer
4 HN 1/2 ZN 4 HN 1/2" SS6

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-20 Eaton

Series 2, 3, 4, & 5 Aluminum - Accessories
Center Hung Tray Support (2) 1/2" Hex Nut (2) 1/2" x 7/8" Hex
• Center Hung Cable Tray Support allows Head Cap Screw
cable to be laid-in from both sides.
(1) 9/16" Inside diameter steel
• Eliminates costly cable pulling and field tubing welded to strut
cutting of cable tray supports. Labor
costs are dramatically reduced. (2) 9ZN-1205
Hold-Down
• Required hardware and threaded rod Guide Clamp
material for trapeze assemblies are
(2) N525WO
reduced by up to 50%. Channel Nut
• Designed for use with 1/2" threaded
rod. (Order rod separately)
• Use with all aluminum and steel (1) B22 Channel cut to
cable trays through 24" width. the required length
• Load capacity is 700 lbs. (311kN) per support.
(1) B202 Square Washer
Safety factor of 3.0.
Eccentric loading is not to exceed a
60% vs. 40% load differential. Catalog Tray Channel
• The maximum recommended unsupported No. Width Length
span length is 144"/12 ft. (3.66 m). in. (mm) in. (mm)
• Hardware shown is furnished. 9ZN-5212 6", 9", 12" (152, 228, 305) 18" (457)
• Finish available: Zinc Plated 9ZN-5224 18", 24" (457, 609) 30" (762)

Center Hung Support Hardware Kit

Catalog No. 9ZN-5200
1 pr. 9ZN-1205
2 HHC Screw 1/2 x 7/8 ZN
In plastic bag 2 N525 WO ZN
1 B202 ZN 1/2" sq washer
4 HN 1/2 ZN

Bracket (12” - 48”)

• (*) Insert available finish:
ZN GRN or HDG
• Safety Load Factor 2.5

Catalog Uniform Load Tray Width 'A' 'H'

B494-30 1600 (7.11) 24 (610) 30 (762) (286)

B494-36 1100 (4.89) 30 (762) 36 (914) 111/4 (286)

Bottom brace is B42 channel on B494-42 980 (4.36) 36 (914) 42 (1067) 16 (406)
B494-24 and smaller and B494-48 980 (4.36) 42 (1067) 48 (1219) 16 (406)
B22 channel on B494-30 and larger
For more dimensional data see Strut Systems catalog

Cantilever Bracket
• (*) Insert available finish:
ZN GRN HDG SS4 or SS6
Catalog No. Uniform Load Tray Width 'A'
• Safety Load Factor 2.5 lbs kN in. mm in. mm
A B409-12 960 (4.27) 6 & 9 (152 & 229) 12 (305)
B409-18 640 (2.84) 12 (305) 18 (457)
B409-24 480 (2.13) 18 (457) 24 (610)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-21 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories
Cantilever Bracket Catalog No. Uniform Load Tray Width ‘A’
• (*) Insert available finish: lbs kN in. mm in. mm
ZN GRN HDG or SS4 B297-12 1660 (7.38) 6 & 9 (152 & 229) 12 (305)
• Safety Load Factor 2.5 A B297-18 1100 (4.89) 12 (305) 18 (457)
B297-24 835 (3.71) 18 (457) 24 (610)
B297-30 665 (2.93) 24 (610) 30 (762)
B297-36 550 (2.44) 30 (762) 36 (914)
B297-42 465 (2.06) 36 (914) 42 (1067)

Underfloor Support (U-Bolts not included)

• Finishes available: ZN
U-Bolt Size Fits Pipe O.D.
• Safety Load Factor 2.5
B501-3/4 .841 - 1.050
B501-1 1.051 - 1.315
B501-11/4 1.316 - 1.660 Catalog No. Uniform Load Tray Width ‘A’
B501-11/2 1.661 - 1.900 lbs (kN) in. (mm) in. (mm)
A
B501-2 1.901 - 2.375 B409UF-12 800 (3.56) 6 & 9 (152 & 229) 12 (305)
B501-21/2 2.376 - 2.875 B409UF-21 450 (2.00) 12 & 18 (305 & 457) 21 (533)

Vertical Hanger Splice Plates

• Design load is 1500 lbs (6.67kN) per pair. Catalog No. Outside ‘A’
• Safety Factor of 2.5 Cable Tray Ht. in. (mm)
• Furnished in pairs. 9A-1224 4" 3.84 (97.54)
• Hole size: 9/16" (14mm) for 71/2" 9A-1225 5" 4.73 (120.14)
(190mm)
1
/2" threaded rod. 9A-1226 6" 5.84 (148.34)
A
9A-1227 7" 6.84 (173.74)

Heavy Duty Hold Down Bracket

• Design load is 2000 lbs (8.89kN) per pair.
• Two bolt design.
• Sold in pairs.
• 3/8" cable tray attachment hardware provided.
• 3/8" support attachment hardware not provided.
Catalog No.
• (*) Insert ZN SS4 or SS6
• Recommended for support of vertical trays. 9(*)-1241

Heavy Duty Hold Down Bracket

Series 2, 3, 4, & 5 Aluminum

• Design load is 4000 lbs (17.79kN) per pair.
• Four bolt design. Catalog No.
• Sold in pairs. 9(*)-1242
• 3
/8" cable tray attachment hardware provided
• 3/8" support attachment hardware not provided.
• (*) Insert ZN SS4 or SS6
• Recommended for support of vertical trays.

Beam Clamp
• Finishes available: ZN GRN HDG or SS4
• Sold in pieces.
• Design load is 1200 lbs (5.34kN) per pair.
• Safety Load Factor 5.0. Catalog No.
• Order HHCS and Channel Nuts separately. B355

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-22 Eaton

Series 2, 3, 4, & 5 Aluminum - Accessories
Beam Clamp
• Finishes available: ZN or HDG Catalog No. Design Load ‘A’
lbs (kN) in. (mm)
• Sold in pieces.
• *Design load when used in pairs. A B441-22 1200 (5.34) 33/8 (86)
Safety Load Factor 5.0 B441-22A 1200 (5.34) 5 (127)

Beam Clamp
• Finishes available: ZN GRN or HDG Catalog No. B212-1/4 B212-3/8
• Sold in pieces.
Design Load * 600 lbs. (2.67kN) 1000 lbs. (4.45 kN)
• *Design load when used in pairs.
Max. Flange Thick 3/4" (19 mm) 11/8" (28.6 mm)
Safety Load Factor 5.0
Mat'l. Thickness 1/4" (6.3 mm) 3/8" (9.5 mm)

B305 Thru B308 & B321 Series Beam Clamps B

• Finishes available: ZN or HDG
• Setscrew included. C
• Safety Load Factor 5.0 D
E
A

F T

Catalog Rod B C D E F T Design Load

No. Size A in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) lbs (kN)
B305 3/8"-16 3/8"-16 25/16 (58.7) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 11 Ga. (3.0) 600 (2.67)
B306 3/8"-16 1/2"-13 27/16 (61.9) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 7 Ga. (4.5) 1100 (4.90)
B307 1/2"-13 1/2"-13 27/16 (61.9) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 7 Ga. (4.5) 1100 (4.90)
B308 1/2"-13 1/2"-13 29/16 (65.1) 7/8 (22.2) 11/8 (28.6) 21/2 (63.5) 1/4 (6.3) 1500 (6.68)
B321-1 3/8"-16 1/2"-13 39/16 (90.5) 111/16 (42.9) 15/8 (41.3) 31/4 (82.5) 1/4 (6.3) 1300 (5.79)
B321-2 1/2"-13 1/2"-13 39/16 (90.5) 111/16 (42.9) 15/8 (41.3) 31/4 (82.5) 1/4 (6.3) 1400 (6.23)

Anchor Strap - for B305 thru B308 & B321 Series

Catalog No. Flange Width
• Finish available: ZN in. (mm)
• For a maximum beam thickness of 3/4" (19mm). B312-6 Up to 6 (Up to 152)
• For thicker beams, step up one flange width size. B312-9 6 - 9 (152 to 228)
B312-12 9 - 12 (228 to 305)

Beam Clamp 1/2"-13 Rod & Hex Nut Sold

Separately
• Finish available: ZN
• Design Load 500 lbs. (2.22 kN) Catalog For Flange Width Wt./C
Series 2, 3, 4, & 5 Aluminum

• Safety Load Factor 5.0 J-Hook & Hex No. in. (mm) lbs (kg)
Nut Included
• Recommended torque: B750-J4 3-6 (76.2 - 152.4) 109 (49.4)
'J'-Hook Nut 125 In.-Lbs. (14.1 kN/m) Material:
B750-J6 5-9 (127.0 - 288.6) 124 (56.2)
7 Gauge (4.6)
• Maximum flange thickness
of 3/4" (19mm). B750-J9 8 - 12 (203.2 - 304.8) 135 (61.,2)
11/2" 17/8" B750-J12 11 - 15 (279.4 - 381.0) 147 (66.7)
(38.1) (47.6)

‘J’-Hook
• Finishes available: ZN Catalog 'A' 'TL' Wt./C
• Hex Nut included.
1/2"-13 Threads No. in. (mm ) in. (mm) lbs (kg)

B700-J4 81/2 (215.9) 5 (127.0) 44 (19.9)

‘TL’ B700-J6 111/2 (292.1) 6 (152.4) 53 (24.0)
Thread Length

‘A’
B700-J9 121/4 (368.3) 6 (152.4) 63 (28.6)
B700-J12 171/2 (444.5) 6 (152.4) 78 (35.4)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-23 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Accessories
Covers

Solid Non-Flanged Solid Flanged Ventilated Flanged Peaked Flanged 2 to 3 Pitch

Peaked Flanged
(See page APP-4)

A full range of covers is available for straight sections and fittings.

Solid covers should be used when maximum enclosure of the cable is desired and no accumulation of heat is expected.
Ventilated covers provide an overhead cable shield, yet allow heat to escape.
We recommend that covers be placed on vertical cable tray runs to a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor to isolate
both cables and personnel. Flanged covers have a 1/2 in. (13 mm) flange. Cover clamps are not included with the cover and must be
ordered separately. All peaked covers are flanged. Standard peaked covers have 1/2" peak. Special purpose peaked covers, having a
2 to 3 pitch, provide additional slope and material thickness. The 2 to 3 pitch fitting covers are of multiple piece, welded construction.

Aluminum Cover Part Numbering

Prefix

Example: 80 7 A - 24 - 144

Cover Type Detail Material Tray Width Item Description

80 = Solid 6 = Non-Flanged A = Aluminum 06 = 6" For Straight Section Cover:
81 = Ventilated (80 & 81 type only) 09 = 9" 144 = 12 ft. (3.66 m)
82 = Peaked 7 = Flange 12 = 12" 120 = 10 ft. (3.05 m)
18 = 18" 72 = 6 ft. (1.83 m)
24 = 24" 60 = 5 ft. (1.52 m)
30 = 30" For fitting covers: Insert suffix
36 = 36" of fitting to be covered.
See example below.

Series 2, 3, 4, & 5 Aluminum

Examples of Catalog Numbers for Fitting Covers:

Horizontal Bend Cover Vertical Bend Cover

Prefix Suffix Prefix Suffix
80 7 A - 18 - 90 HB 24 80 7 A - 24 - 90 VO 24 - 4*
Side Rail*
Radius Height
Fitting Radius
Angle Fitting
Width Angle
Material Width
Detail Material
Cover Type Detail
Cover Type

* Required for VO fittings only

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems I-24 Eaton

Series 2, 3, 4, & 5 Aluminum - Accessories
Standard Cover Clamp
• For indoor service only.
• Setscrew included. Tray Type Catalog No. Side Rail Height
• Sold per piece.
9ZN-9012
Aluminum All Sizes
9A-9012

Combination Cover and Hold Down Clamp

• Sold per piece. Tray Type Catalog No. Side Rail Height
• For indoor service only. in. (mm)

9A-9043 4 (101)
9A-9053 5 (127)
Aluminum
9A-9063 6 (152)
9A-9073 7 (78)

Raised Cover Clamp

• For indoor service only.
• For use with flanged covers only. † Tray Type Catalog No. Side Rail Height
† Specify gap of 1", 2", 3" or 4". 9ZN-9112-† 4 & 5 Deep
Aluminum
9ZN-9113-† 6 & 7 Deep

Heavy Duty Cover Clamp

• Recommended for outdoor service.
• (‡) Insert tray width Peaked Cover Clamp
† Add P to Catalog No. Catalog No. Side Rail Height
in. mm
for peaked cover clamp.
9A-(‡)-9044† 4 (101)
9A-(‡)-9054† 5 (127)
9A-(‡)-9064† 6 (152)
9A-(‡)-9074† 7 (178)

Quantity of Standard Cover Clamps Required

Straight Section 60" or 72" ....................................... 4 pcs.
Notes:
Straight Section 120" or 144" ................................. 6 pcs.
When using the Heavy Duty Cover Clamp, only on-half
the number of clamps stated above is required. Horizontal/Vertical Bends .......................................... 4 pcs.
Additional clamps may be necessary in extreme wind applications. Tees ........................................................................................... 6 pcs.
Crosses ................................................................................... 8 pcs.

Cover Joint Strip

Series 2, 3, 4, & 5 Aluminum

• Used to join covers

• Plastic Catalog No.
• (‡) Insert tray width
99-9980-(‡)

Cable Cleats
(see pages O-1 thru O-5) Standard

Trefoil Single
Cable Cable
Cleats Cleats

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton I-25 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Aluminum - Specifications

Section 1- Acceptable Manufacturers

1.01 Manufacturer: Subject to compliance with these specifications, Eaton’s B-Line series cable tray systems shall be as
manufactured by Eaton.

Section 2- Cable Tray Sections and Components

2.01 General: Except as otherwise indicated, provide metal cable trays, of types, classes and sizes indicated;
with splice plates, bolts, nuts and washers for connecting units. Construct units with rounded edges
and smooth surfaces; in compliance with applicable standards; and with the following additional
construction features. Cable tray shall be installed according to the latest revision of NEMA VE 2.
2.02 Materials and Finish: Straight section and fitting side rails and rungs shall be extruded from Aluminum
Association Alloy 6063. All fabricated parts shall be made from Aluminum Association Alloy 5052.
2.03 Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members
(rungs) welded to the side rails. Rungs shall be spaced [6] [9] [12] inches apart. Rung spacing in
radiused fittings shall be industry standard 9" and measured at the center of the tray’s width. Each
rung must be capable of supporting a 200 lb. concentrated load at the center of the cable tray over
and above the cable load with a safety factor of 1.5.
2.04 Ventilated Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated
bottom welded to the side rails or rungs spaced 4" apart. The peaks of the corrugated bottom
shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers. To
provide ventilation in the tray, the valleys of the corrugated bottom shall have 21/4" x 4" rectangular
holes punched along the width of the bottom.
2.05 Non-Ventilated Bottom Trough Cable Trays shall consist of two longitudinal members (side rails) with a
corrugated bottom welded to the side rails or a solid sheet over rungs. The peaks of the corrugated
bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers.
2.06 Cable tray loading depth shall be [3] [4] [5] [6] inches per NEMA VE 1.
2.07 Straight sections shall have side rails fabricated as I-beams. Straight sections shall be supplied in
standard [12 foot] [24 foot] [10 foot (3 m)] [20 foot (6 m)] lengths.
2.08 Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.
2.09 Splice plates shall be the Wedge-Lock design with 4 nuts and bolts per plate. The resistance of fixed
splice connections between an adjacent section of tray shall not exceed 0.00033 ohm.
2.10 All fittings must have a minimum radius of [12] [24] [36] [48] inches.

Section 3- Loading Capacities and Testing

Series 2, 3, 4, & 5 Aluminum

3.01 Cable tray shall be capable of carrying a uniformly distributed load of ______ lbs./ft. on a _______ ft.
support span with a safety factor of 1.5 when supported as a simple span and tested per NEMA
VE 1 5.2. In addition to the uniformly distributed load the cable tray shall support 200 lbs.
concentrated load at mid-point of span. Load and safety factors specified are applicable to both the
side rails and rung capacities. Cable tray shall be made to manufacturing tolerances as specified by
NEMA.
3.02 Upon request, manufacturer shall provide test reports in accordance with the latest revision of NEMA VE 1
or CSA C22.2 No. 126.

B-Line series Cable Tray Systems I-26 Eaton

Series 2, 3, 4, & 5 Steel - Straight Sections
Series 2, 3, 4, & 5 Steel

Eaton J-1 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Accessories

For Steel Fittings

Series 2, 3, 4, & 5 Steel

see fittings section pages
L-1 thru L-17

How The Service Advisor Works

We know that your time is important! That’s why the color-coding system in this catalog is designed to help you
select products that fit your service needs. Products are marked to indicate the typical lead time for orders of 50
pieces or less.
Customer: How do I select my straight sections. covers, or fittings so that I get the quickest turnaround?
Service Advisor: Each part of our selection chart is shown in colors. If any section of a part number is a different
color, the part will typically ship with the longer lead time represented by the colors.
Green = Fastest shipped items
Black = Normal lead-time items
Red = Normally long lead-time items
Example: 258G 12 - 24 - 144 Part will have a long
lead time because of the
258G material.
Changing the part number from 258G to 258P will change the coding to black and reduce lead time.

B-Line series Cable Tray Systems J-2 Eaton

Series 2, 3, 4, & 5 Steel - Straight Sections

3" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

4" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 248 P 09 - 24 - 144

Series Material Type Width Length

P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
248 248
G = HDGAF 06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
346 346
12 = 12" rung spacing 18 = 18" 144 = 12 ft.
24 = 24" ¨ 240 = 20 ft.
¡
444 444
30 = 30" 288 = 24 ft.
36 = 36"
¨Primary
Trough-
Length.
¡Secondary
For side rail & rung 6" thru 36" wide
data, see chart on Length.
pages APP-6
& APP-7
VT = Ventilated Trough
Rung
Spacing ST = Non-Ventilated Trough See page C-23 for
explanation of lengths.
Width
(Inside)
Overall Width
(Width + (*)) (*)=13/16” (Series 2)
13/8” (Series 3,4,5)

See page APP-1 for additional rung options. *Special sizes available.

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-3 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Straight Sections

3" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

4" Side Rail Height

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply publish load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

*When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.272 kg/m) for 30" cable tray width and 325 lbs/ft (483.6 kg/m)
for 36" cable tray width. When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much
as 50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-4 Eaton

Series 2, 3, 4, & 5 Steel - Straight Sections

4" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

5" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 258 P 09 - 24 - 144

Series Material Type Width Length

P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
258 258
G = HDGAF 06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
356 356
12 = 12" rung spacing 18 = 18" 144 = 12 ft.
24 = 24" ¨ 240 = 20 ft.
¡
454 454
30 = 30" 288 = 24 ft.
36 = 36"
¨Primary
Trough-
Length.
¡Secondary
For side rail & rung 6" thru 36" wide
data, see chart on Length.
pages APP-6
& APP-7
VT = Ventilated Trough
Rung
Spacing ST = Non-Ventilated Trough See page C-23 for
explanation of lengths.
Width
(Inside)
Overall Width
(Width + (*)) (*)=13/16” (Series 2)
13/8” (Series 3,4,5)

See page APP-1 for additional rung options. *Special sizes available.

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-5 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Straight Sections

4" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

5" Side Rail Height

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply publish load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

*When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.272 kg/m) for 30" cable tray width and 325 lbs/ft (483.6 kg/m)
for 36" cable tray width. When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as
50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-6 Eaton

Series 2, 3, 4, & 5 Steel - Straight Sections

5" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

6" Side Rail Height

Straight Section Part Numbering
Prefix
Example: 268 P 09 - 24 - 144

Series Material Type Width Length

P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
268 268
G = HDGAF 06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
366 366
12 = 12" rung spacing 18 = 18" 144 = 12 ft.
24 = 24" ¨ 240 = 20 ft.
¡
464 464
30 = 30" 288 = 24 ft.
36 = 36"
¨Primary
Trough-
Length.
¡Secondary
For side rail & rung 6" thru 36" wide
data, see chart on Length.
pages AP-6
& APP-7
VT = Ventilated Trough
Rung
Spacing ST = Non-Ventilated Trough See page C-23 for
explanation of lengths.
Width
(Inside)
Overall Width
(Width + (*)) (*)=13/16” (Series 2)
13/8” (Series 3,4,5)

See page APP-1 for additional rung options. *Special sizes available.

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-7 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Straight Sections

5" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

6" Side Rail Height

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply publish load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

*When using 18" rung spacing, load capacity is limited to 394 lbs/ft (586.272 kg/m) for 30" cable tray width and 325 lbs/ft (483.6 kg/m)
for 36" cable tray width. When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as
50%. Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-8 Eaton

Series 2, 3, 4, & 5 Steel - Straight Sections

6" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

7" Side Rail Height

Straight Section Part Numbering
Prefix
Example: 378 P 09 - 24 - 144

Series Material Type Width Length

P = Pre-Galvanized Ladder- 06 = 6" ¨ 144 = 12 ft.
¡
378 378
G = HDGAF 06 = 6" rung spacing 09 = 9" 120 = 10 ft.
09 = 9" rung spacing 12 = 12" ¨ 240 = 20 ft.
¡
476 476
12 = 12" rung spacing 18 = 18" 288 = 24 ft.
24 = 24" ¨ 240 = 20 ft.
¡
574 574
30 = 30" 288 = 24 ft.
36 = 36"
¨Primary
Trough-
Length.
¡Secondary
For side rail & rung 6" thru 36" wide
data, see chart on Length.
pages AP-6
& APP-7
VT = Ventilated Trough
Rung
Spacing ST = Non-Ventilated Trough See page C-23 for
explanation of lengths.
Width
(Inside)
Overall Width
(Width + (*)) (*)=13/16” (Series 2)
13/8” (Series 3,4,5)

See page APP-1 for additional rung options. *Special sizes available.

Ladder Type Ventilated Trough Non-Ventilated Trough

(Specify Rung Spacing)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-9 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Straight Sections

6" NEMA VE 1 Loading Depth

Series 2, 3, 4, & 5 Steel

7" Side Rail Height

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray with rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply publish load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable tray being installed.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.50
8 319 0.0006 2.4 474 0.009
NEMA: 20A, 16B 10 204 0.0014 3.0 304 0.023
378 6.14 CSA: D1-3m 12 142 0.0028 Area = 1.01 in2 3.7 211 0.048 Area = 6.52 cm2
7.188
14 104 0.0052 Sx = 1.77 in3 4.3 155 0.089 Sx = 29.01 cm3
UL Cross-Sectional 16 80 0.0089 Ix = 6.90 in4 4.9 119 0.151 Ix = 287.20 cm4
18 gauge Area: 0.70 in2 18 63 0.014 5.5 94 0.242
20 51 0.022 6.1 76 0.369

When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors:
Ix = Moment of Inertia, Sx = Section Modulus.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-10 Eaton

Series 2, 3, 4, & 5 Steel - Accessories
Splice Plates
• Standard 8-hole pattern for all steel splice plates. Catalog No. Height
Series 2, 3, 4, & 5 Steel

• Furnished in pairs with hardware. in. mm

• One pair including hardware provided with straight section.
9(*)-8004 4 (101)
(Expansion splice quantity subtracted)
• Boxed in pairs with hardware. 9(*)-8005 5 (127)
• (*) Insert ZN or G 9(*)-8006 6 (152)
9(*)-8007 7 (178)

Expansion Splice Plates

• Expansion plates allow for one inch expansion or
Catalog No. Height
contraction of the cable tray, or where expansion in. mm
joints occur in the support structure.
• Furnished in pairs with hardware. 9(*)-8014 4 (101)
• Bonding Jumpers are required on each siderail. 9(*)-8015 5 (127)
Order Separately. 9(*)-8016 6 (152)
• (*) Insert ZN or G 9(*)-8017 7 (178)
For heavy duty expansion splice plates see page APP-3.

Universal Splice Plates

• Used to splice to existing cable tray
systems. Catalog No. Height
• Furnished in pairs with hardware. in. mm
• (*) Insert ZN or G 9(*)-8004-1/2 4 (101)
9(*)-8005-1/2 5 (127)
9(*)-8006 -1/2 6 (152)
9(*)-8007 -1/2 7 (178)

Step Down Splice Plates Catalog No. Height

in. mm
• These splice plates are offered for connecting cable
tray sections having side rails of different heights. 9(*)-8045 5 to 4 (127 to 101)
• Furnished in pairs with hardware. 9(*)-8046 6 to 4 (152 to 101)
• (*) Insert ZN or G 9(*)-8060 6 to 5 (152 to 127)
9(*)-8047 7 to 4 (178 to 101)
9(*)-8061 7 to 5 (178 to 127)
9(*)-8062 7 to 6 (178 to 152)

Vertical Adjustable Splice Plates

• These plates provide for changes in elevation that
do not conform to standard vertical fittings. Catalog No. Height
in. mm
• Furnished in pairs with hardware.
• Bonding Jumpers not required. 9(*)-8024 4 (101)
• (*) Insert G or P 9(*)-8025 5 (127)
9(*)-8026 6 (152)
9(*)-8027 7 (178)
Requires supports within 24” on both sides, per NEMA VE 2.

Branch Pivot Connectors

• Branch from existing cable tray runs at any point.
Catalog No. Height
• Pivot to any required angle. in. mm
• UL Classified for grounding
(bonding jumpers not required). 9(*)-8244 4 (101)
• Furnished in pairs with hardware. 9(*)-8245 5 (127)
• (*) Insert ZN or G 9(*)-8246 6 (152)
9(*)-8247 7 (178)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-11 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Accessories
Horizontal Adjustable Splice Plates L
• Offered to adjust a cable tray run for changes in L
direction in a horizontal plane that do not conform

Series 2, 3, 4, & 5 Steel

to standard horizontal fittings. 9(*)-803(X)
Splice only
• Furnished in pairs with hardware.
• Bonding jumpers not required. 9(*)-803(X)-12 or 9(*)-803(X)-36
One pair splice plates with extensions.
• (*) Insert ZN or G
• (X) Insert 4, 5, 6 or 7 for side rail height.
Catalog Cable Tray Thru Tray Width ‘L’
No. End Cut in. (mm) in. (mm)

9(*)-803(X) Mitered 36 (914) N/A (NA)

9(*)-803(X)-12 Not mitered 12 (305) 16 (406)
Requires supports within 24” on both sides, per NEMA VE 2. 9(*)-803(X)-36 Not mitered 36 (914) 41 (1041)

Offset Reducing Splice Plate

• This plate is used for joining cable trays having different
widths. When used in pairs they form a straight reduction; Catalog No. Height
when used singly with a standard splice plate, they form in. mm
an offset reduction.
9(*)-8064-(‡) 4 (101)
• Furnished as one plate with hardware.
9(*)-8065-(‡) 5 (127)
• (‡) Insert reduction
9(*)-8066-(‡) 6 (152)
• (*) Insert G or P
9(*)-8067-(‡) 7 (178)

Tray to Box Splice Plates

Catalog No. Height
• Used to attach the end of a cable tray run to a in. mm
distribution box or control panel.
9(*)-8054 4 (101)
• Furnished in pairs with hardware.
9(*)-8055 5 (127)
• (*) Insert G or P
9(*)-8056 6 (152)
9(*)-8057 7 (178)

Frame Type Box Connector

• Designed to attach the end of a cable tray run to a Catalog No. Height
in. mm
distribution cabinet or control center to help
reinforce the box at the point of entry. 9(*)-8074-(‡) 4 (101)
• Furnished with tray connection hardware. 9(*)-8075-(‡) 5 (127)
• (*) Insert ZN or G 9(*)-8076-(‡) 6 (152)
• (‡) Insert tray width 9(*)-8077-(‡) 7 (178)

Blind End
Catalog No. Height
• This plate forms a closure for a dead end cable tray. in. mm
• Furnished as one plate with hardware.
• (*) Insert G or P 9(*)-8084-(‡) 4 (101)
• (‡) Insert tray width 9(*)-8085-(‡) 5 (127)
9(*)-8086-(‡) 6 (152)
9(*)-8087-(‡) 7 (178)

Cross Connector Bracket

• For field connecting crossing section.
• Furnished in pairs with 3/8" hardware.
• (*) Insert ZN or G

Catalog No.
9(*)-1240

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-12 Eaton

Series 2, 3, 4, & 5 Steel - Accessories
Standard Tray Hardware (for field installation drill 13/32” hole)
• Finishes: [ZN] Zinc Plated ASTM B633 SC1 Catalog No. Description
Series 2, 3, 4, & 5 Steel

for pre-galvanized tray

[CZ] Chromium Zinc Plated F1136-88 RNCB 3/8” x 3/4” ZN Ribbed Neck Carriage Bolt ASTM A307 Grade A
Grade A for hot dip galvanized tray SFHN 3/8”-16 ZN Serrated Flange Hex Nut ASTM A563 Grade A
RNCB 3/8” x 3/4” CZ Ribbed Neck Carriage Bolt ASTM F1136-88 Grade 3
SFHN 3/8”-16 CZ Serrated Flange Hex Nut ASTM F1136-88 Grade A

Optional Tray Hardware (for field installation drill 13/32” hole)

• To order 316 stainless steel hardware
add SS6 suffix to catalog number -
Example: 9G-8004SS6 Catalog No. Description
RNCB 3/8” x 3/4” SS6 Ribbed Neck Carriage Bolt AISI 316 Stainless Steel
SFHN 3/8”-16 SS6 Serrated Flange Hex Nut AISI 316 Stainless Steel

Conduit to Cable Tray Adaptor

• For easy attachment of conduit terminating
at a cable tray.
• Use on aluminum or steel cable trays. Catalog No. Conduit Size
in. mm

9G-1158-1/2, 3/2 1/2, 3/4 (15, 20)

9G-1158-1, 11/4 1, 11/4 (25, 32)
9G-1158-11/2, 2 11/2, 2 (40, 50)
Steel I-Beam
9G-1158-21/2, 3 21/2, 3 (65, 80)
9G-1158-31/2, 4 31/2, 4 (90, 100)

Conduit to Cable Tray Adaptor

• Assembly required.
• Mounting hardware included.
• Conduit clamps provided.
• (‡) = Insert conduit size (1/2" thru 4").
Catalog No.
9ZN-1150-(‡)

Conduit to Cable Tray Adaptor

• Assembly required.
• Conduit clamps included.
• (‡) = Insert conduit size (1/2" thru 4").

Catalog No.
9ZN-1155-(‡)

Cable Tie (Ladder Tray)

• Nylon ties provide easy attachment of cable to ladder
rungs; maximum cable O.D. is 3" (76mm).

Overall Length 15" (381mm) Catalog No.

99-2125-15

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-13 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Accessories
Ladder Drop-Out
• Specially-designed Ladder Drop-Outs provide a rounded
surface with 4" (101 mm) radius to protect cable as it exits

Series 2, 3, 4, & 5 Steel

from the cable tray, preventing damage to insulation.
The drop-out will attach to any desired rung.
• (*) Insert P or G Catalog No.
• (‡) Insert tray width 9(*)-1104-(‡)

Trough Drop-Out & Drop-Out Bushing

• These devices provide a rounded surface to protect cable
as it exits from the trough-type cable tray.
• Hardware is included for attachment of the trough
bottom drop-out.
• (*) Insert P or G Trough-Type Drop-Out Snap-In Plastic Bushing
• (‡) Insert tray width Catalog No. Catalog No.
9(*)-1104T-(‡) 99-1124

Barrier - Straight Section

Catalog Side Rail Loading
• Length: Insert 120 for [120” - 10 ft.] (3.0 m)
No. Height Depth 'H'
or 144 for [144" - 12 ft.] (3.6 m) in. mm in. mm
• Order catalog number based on loading depth.
73(*)-Length 4 (101) 3 (76)
• Furnished with four #10 x 1/2" plated
74(*)-Length 5 (127) 4 (101)
self-drilling screws and a 99-9982 Barrier Strip Splice.
• (*) Insert P or G 75(*)-Length 6 (152) 5 (127)
H
76(*)-Length 7 (178) 6 (152)

Barrier - Horizontal Bend

• Horizontal Bend Barriers are flexible in order Catalog Side Rail Loading
to conform to any horizontal fitting radius. No. Height Depth 'H'
Can be cut to desired length. in. mm in. mm
• Standard length is 72" [6 ft.] (1.8 m) - sold individually 73(*)-90HBFL 4 (101) 3 (76)
• Order catalog number based on loading depth. 74(*)-90HBFL 5 (127) 4 (101)
• Furnished with three #10 x 1/2" plated H 75(*)-90HBFL 6 (152) 5 (127)
self-drilling screws and a 99-9982 Barrier Strip Splice.
• (*) Insert P or G 76(*)-90HBFL 7 (178) 6 (152)

Barrier - Vertical Outside Bend

H
• Vertical Outside Bend Barriers are preformed to conform
to a specific vertical outside bend fitting. Catalog Side Rail Loading
• Furnished with three #10 x 1/2" plated self-drilling No. Height Depth 'H'
in. mm in. mm
screws and a 99-9982 Barrier Strip Splice.
• (*) Insert P or G Outside Bend 73(*)-(**)VO(†) 4 (101) 3 (76)
• (**) Insert 30, 45, 60 or 90 for degrees (VO) 74(*)-(**)VO(†) 5 (127) 4 (101)
• (†) Insert 12, 24, 36 or 48 for radius 75(*)-(**)VO(†) 6 (152) 5 (127)
76(*)-(**)VO(†) 7 (178) 6 (152)

Barrier - Vertical Inside Bend

• Vertical Inside Bend Barriers are preformed to conform
to a specific vertical inside bend fitting. Catalog Side Rail Loading
• Furnished with three #10 x 1/2" plated self-drilling No. Height Depth 'H'
in. mm in. mm
screws and a 99-9982 Barrier Strip Splice.
• (*) Insert P or G 73(*)-(**)VI(†) 4 (101) 3 (76)
• (**) Insert 30, 45, 60 or 90 for degrees 74(*)-(**)VI(†) 5 (127) 4 (101)
• (†) Insert 12, 24, 36 or 48 for radius Inside Bend 75(*)-(**)VI(†) 6 (152) 5 (127)
H
(VI) 76(*)-(**)VI(†) 7 (178) 6 (152)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-14 Eaton

Series 2, 3, 4, & 5 Steel - Accessories
Barrier Strip Clip
• Zinc plated steel barrier clip fastens to either aluminum or steel
Series 2, 3, 4, & 5 Steel

ladder rung.
• Furnished with one #10 x 1/2" zinc plated self-drilling screw.

Catalog No.
9ZN-9002

Barrier Strip Splice

Bonding Jumper
Use at each expansion splice and where the cable tray
is not mechanically/electrically continuous to ground.
Sold individually.
• Hardware included.
• See table 392.7(B)(2) on page CTS-9 for amperage ratings
required to match the UL cross-sectional area of the tray.
• See tray loading chart for UL cross-sectional area. Catalog No. Copper Wire Size Ampacity
• Bonding jumper is 141/2" (368mm) long. 99-N1 #1 600

Grounding Clamp
B-Line series cable tray is UL® classified as to its suitability as
an equipment grounding conductor. If a separate conductor for
additional grounding capability is desired, we offer this clamp for
bolting the conductor at least once to each cable tray section.
• Accepts #6 AWG to 250 MCM. Catalog No. Material
9A-2130 Tin Plated Aluminum

Ground Wire Clamp

• Mechanically attaches grounding cables to cable tray.
• Hardware included. Catalog No. Material
• (*) Insert ZN or SS4 9(*)-2351 #1 thru 2/0
9(*)-2352 3/0 thru 250 MCM

Thread Rod (ATR) & Rod Couplings

Loading based on safety factor 5. Size Catalog No. Available Length Loading
Standard Finish: Zinc plated All Threaded Rod
See B-Line series Strut Systems Catalog /8"-16
3
ATR 3/8" x Length 36", 72", 120", 144" 730 lbs.
for other sizes and finishes.
/2"-13
1
ATR 1/2" x Length 36", 72", 120", 144" 1350 lbs.
Rod Coupling
/8"-16
3
B655-3/8" NA 730 lbs.
B655 ATR /2"-13
1
B655-1/2" NA 1350 lbs.
Rod Coupling All Threaded Rod

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-15 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Accessories
Stainless Steel Cable Clamp
Catalog No. Cable Size
• Fits with series 2, 3, 4 & 5 standard steel rungs. in. mm
• Shipped flat. Field form around the cable

Series 2, 3, 4, & 5 Steel

at the time of installation. 9SS4-4050 0.50 - 0.75 (13 - 19)
9SS4-4075 0.75 - 1.00 (19 - 25)
9SS4-4100 1.00 - 1.25 (25 - 32)
9SS4-4125 1.25 - 1.50 (32 - 38)
9SS4-4150 1.50 - 1.75 (38 - 45)
9SS4-4175 1.75 - 2.00 (45 - 51)
9SS4-4200 2.00 - 2.25 (51 - 57)
9SS4-4225 2.25 - 2.50 (57 - 64)
9SS4-4250 2.50 - 2.75 (64 - 70)
9SS4-4275 2.75 - 3.00 (70 - 76)
Refer to Section CF
9SS4-4300 3.00 - 3.25 (76 - 82)
Cable Fixing
9SS4-4325 3.25 - 3.50 (82 - 89)
9SS4-4350 3.50 - 3.75 (89 - 95)
9SS4-4375 3.75 - 4.00 (95 - 100)
9SS4-4400 4.00 - 4.25 (100 - 106)
9SS4-4425 4.25 - 4.50 (106 - 113)
9SS4-4450 4.50 - 4.75 (113 - 121)
9SS4-4475 4.75 - 5.00 (121 - 125)

Hanger Rod Clamp

• For 1/2" ATR.
• Furnished in pairs.
• Order ATR and hex nuts separately.
• Two-piece "J"-hanger design.
Catalog No. Height
• 1350 lbs./pair capacity. in. mm
• (*) Insert ZN or G
9(*)-5324 4 (101)
9(*)-5325 5 (127)
9(*)-5326 6 (152)
9(*)-5327 7 (178)

Cable Tray Clamp/Guide

• Features a no-twist design.
• Has four times the strength of the traditional design.
• Each side is labeled to ensure proper installation.
• Furnished in pairs, with or without hardware.
• Not recommended for vertical support.
Note: For heavy duty or vertical applications
see 9(*)-1241 or 9(*)-1242 page HAT-20
Patent # RE35479

Catalog No.
Without With Overall Hardware
Hardware Hardware Length Size Finish
in. (mm) in.
9ZN-1204 9ZN-1204NB 11/2 (38) 1/4" G90
Length Length 9ZN-1208 9ZN-1208NB 21/4 (57) 3/8" G90
9ZN-1204 shown. 9ZN-1208 shown. 9A-1205 -- 21/4 (57) 1/2" Alum.
Installed as a guide. Installed as a clamp.
9G-1205 -- 21/4 (57) 1/2" HDGAF
When installing this device as an expansion guide on the 9SS6-1205 -- 21/4 (57) 1/2" 316SS
outside flange of Steel Side Rail, use the Catalog No. B202 9ZN-1205 -- 21/4 (57) 1/2" G90
Square Washer in order to properly elevate the guide.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-16 Eaton

Series 2, 3, 4, & 5 Steel - Accessories
Cable Tray Clamp
• Hold-down clamps for single or double cable tray runs.
Series 2, 3, 4, & 5 Steel

• No drilling of support I-beam or channel is required.

• Sold in pieces - two clamps are required per tray.
• Maximum beam flange thickness 11/8" (28.58 mm).
Catalog No. Finish
9ZN-1249HD Znplt
9G-1249HD HDGAF

Cable Tray Guide

Nylon Pad
• Use for friction reduction.
1/8"
• Hardness: Shore D80.
(3mm)
• Low friction coefficient.
• UV resistant.
• Excellent weatherability. 6"
• UL - 94HB. (152mm)
3" Catalog No.
(76mm) 99-PE36

Neoprene Roll
• Use for material isolation.
• 1/8" x 2" x 25' roll.
• Hardness: Shore A60. Catalog No.
• Good weatherability. 99-NP300

DURA-BLOK™ Rooftop Support Bases with B22 Channel

• Designed as a superior rooftop support
for cable tray,
• UV resistant and approved for most Catalog No. Height x Width x Length
roofing material or other flat surfaces. in. (mm)
• Can be used with any of B-Line series cable DB10-28 55/8 x 6 x 28.0 (143 x 152 x 711)
tray clamps and guides.
DB10-36 55/8 x 6 x 36.0 (143 x 152 x 914)
• Ultimate Load Capacity:
DB10-42 55/8 x 6 x 42.0 (143 x 152 x 1067)
1,000 lbs. (uniform load)
DB10-50 55/8 x 6 x 50.0 (143 x 152 x 1270)
DB10-60 55/8 x 6 x 60.0 (143 x 152 x 1524)

LEEDS credit available, base made from 100% recycled material.

General Note: Consult roofing manufacturer or engineer for roof load

capacity. The weakest point may be the insulation board beneath
the rubber membrane.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-17 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Accessories
Trapeze Support Kit
• Eaton’s B-Line series trapeze kits provide the components
required for a single trapeze support in one package. These kits

Series 2, 3, 4, & 5 Steel

are available in pre-galvanized steel with zinc-plated hardware,
hot dip galvanized steel with 316 stainless steel hardware, or
DURA GREEN™ painted steel with zinc-plated hardware.
• The SH channel provides the convenience of pre-punched
slots, which eliminate the need for field drilling.
Catalog Tray Channel Uniform
• The illustrated hardware is sealed in a plastic bag and boxed No. Width Length Load
with the channel, which is pre-cut to the appropriate length in. mm in. mm lbs kN
as shown in the chart. (2) 1/2" x 7/8" Hex 9(*)-5506-22SH(†) 6 (152) 16 (406) 1350 (6.00)
• Designed for use with Head Cap Screw
1/2" threaded rod. (2) 9ZN-1205 9(*)-5509-22SH(†) 9 (229) 18 (457) 1250 (5.56)
Hold-Down Guide Clamp
Order rod separately. 9(*)-5512-22SH(†) 12 (305) 22 (559) 1125 (5.00)
(4) 1/2" Hex Nut 9(*)-5518-22SH(†) 18 (457) 28 (711) 865 (3.85)
(2) N525WO
Channel Nut (4) B202
9(*)-5524-22SH(†) 24 (610) 34 (864) 700 (3.11)
Square Washer 9(*)-5530-22SH(†) 30 (762) 40 (1016) 590 (2.62)
9(*)-5536-22SH(†) 36 (914) 46 (1168) 510 (2.27)
9(*)-5542-22SH(†) 42 (1067) 52 (1321) 450 (2.00)
(1) B22 Channel cut
to the required length • (*) Insert P G or GRN
• (†) Insert 3/8 for 3/8" threaded rod hardware.
Safety factor of 3.0 on all loads.

Heavy Duty Trapeze Support Kit

• Eaton’s B-Line series trapeze kits provide the components required
for a single trapeze support in one package. These kits are
available in pre-galvanized steel with zinc-plated hardware, hot dip
galvanized steel with 316 stainless steel hardware, or DURA
GREEN™ painted steel with zinc-plated hardware.
• The SH channel provides the convenience of pre-punched slots, Catalog Tray Channel Uniform
which eliminates the need for field drilling. No. Width Length Load
• The illustrated hardware is sealed (2) 9ZN-1205 in. mm in. mm lbs kN
Hold-Down Guide Clamp
in a plastic bag and boxed with the 9(*)-5506-22SHA 6 (152) 16 (406) 1350 (6.00)
channel, which is pre-cut to the (2) N525WO 9(*)-5509-22SHA 9 (229) 18 (457) 1350 (6.00)
appropriate length as shown Channel Nut 9(*)-5512-22SHA 12 (305) 22 (559) 1350 (6.00)
in the chart.
9(*)-5518-22SHA 18 (457) 28 (711) 1350 (6.00)
• Designed for use with
1/2" threaded rod. 9(*)-5524-22SHA 24 (610) 34 (864) 1350 (6.00)
Order rod separately. 9(*)-5530-22SHA 30 (762) 40 (1016) 1350 (6.00)
9(*)-5536-22SHA 36 (914) 46 (1168) 1350 (6.00)
(2) 1/2" x 7/8" Hex
Head Cap Screw 9(*)-5542-22SHA 42 (1067) 52 (1321) 1350 (6.00)

(1) B22 Channel cut to • (*) Insert P G or GRN

the required length
Safety factor of 3.0 on all loads.
(4) B202 Square Washer
(4) 1/2" Hex Nut

Trapeze Hardware Kit

Catalog No. 9ZN-5500-1/2 9G-5500-1/2

1 pr. 9ZN-1205 1 pr. 9G-1205
2 HHC Screw 1/2 x 7/8 ZN 2 HHC Screw 1/2 x 7/8 SS6
In plastic bag 2 N525 WO ZN 2 N525 WO SS6
4 B202 ZN 1/2" sq washer 4 B202 HDG 1/2" sq washer
4 HN 1/2 ZN 4 HN 1/2" SS6

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-18 Eaton

Series 2, 3, 4, & 5 Steel - Accessories
Center Hung Tray Support (2) 1/2" Hex Nut (2) 1/2" x 7/8" Hex
• Center Hung Cable Tray Support allows Head Cap Screw
Series 2, 3, 4, & 5 Steel

cable to be laid-in from both sides.

(1) 9/16" Inside diameter steel
• Eliminates costly cable pulling and field tubing welded to strut
cutting of cable tray supports. Labor
costs are dramatically reduced. (2) 9ZN-1205
Hold-Down
• Required hardware and threaded rod Guide Clamp
material for trapeze assemblies are
(2) N525WO
reduced by up to 50%. Channel Nut
• Designed for use with 1/2" threaded
rod. (Order rod separately)
• Use with all aluminum and steel (1) B22 Channel cut to
cable trays through 24" width. the required length
• Load capacity is 700 lbs. (311kN) per support.
(1) B202 Square Washer
Safety factor of 3.0.
Eccentric loading is not to exceed a
60% vs. 40% load differential. Catalog Tray Channel
• The maximum recommended unsupported No. Width Length
span length is 144"/12 ft. (3.66 m). in. (mm) in. (mm)
• Hardware shown is furnished. 9ZN-5212 6", 9", 12" (152, 228, 305) 18" (457)
• Finish available: Zinc Plated 9ZN-5224 18", 24" (457, 609) 30" (762)

Center Hung Support Hardware Kit

Catalog No. 9ZN-5200
1 pr. 9ZN-1205
2 HHC Screw 1/2 x 7/8 ZN
In plastic bag 2 N525 WO ZN
1 B202 ZN 1/2" sq washer
4 HN 1/2 ZN

Bracket (12” - 48”)

• (*) Insert available finish:
ZN GRN or HDG
• Safety Load Factor 2.5
Catalog Uniform Load Tray Width 'A' 'H'
No. lbs (kN) in. (mm) in. (mm) in. (mm)
B494-12 2500 (11.12) 6 & 9 (152 & 229) 12 (305) 83/4 (222)
A
H B494-18 1700 (7.56) 12 (305) 18 (457) 83/4 (222)
B494-24 1300 (5.78) 18 (457) 24 (610) 83/4 (222)
B494-30 1600 (7.11) 24 (610) 30 (762) 111/4 (286)
B494-36 1100 (4.89) 30 (762) 36 (914) 111/4 (286)
B494-42 980 (4.36) 36 (914) 42 (1067) 16 (406)
Bottom brace is B42 channel on
B494-24 and smaller and B494-48 980 (4.36) 42 (1067) 48 (1219) 16 (406)
B22 channel on B494-30 and larger For more dimensional data see Strut Systems catalog

Cantilever Bracket
• (*) Insert available finish:
ZN GRN or HDG Catalog No. Uniform Load Tray Width 'A'
lbs kN in. mm in. mm
• Safety Load Factor 2.5
B409-12 960 (4.27) 6 & 9 (152 & 229) 12 (305)
A
B409-18 640 (2.84) 12 (305) 18 (457)
B409-24 480 (2.13) 18 (457) 24 (610)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-19 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Accessories
Cantilever Bracket Catalog No. Uniform Load Tray Width ‘A’
• (*) Insert available finish: lbs kN in. mm in. mm
ZN GRN or HDG B297-12 1660 (7.38) 6 & 9 (152 & 229) 12 (305)

Series 2, 3, 4, & 5 Steel

• Safety Load Factor 2.5 A B297-18 1100 (4.89) 12 (305) 18 (457)
B297-24 835 (3.71) 18 (457) 24 (610)
B297-30 665 (2.93) 24 (610) 30 (762)
B297-36 550 (2.44) 30 (762) 36 (914)
B297-42 465 (2.06) 36 (914) 42 (1067)

Underfloor Support (U-Bolts not included)

• Finishes available: ZN
U-Bolt Size Fits Pipe O.D.
• Safety Load Factor 2.5
B501-3/4 .841 - 1.050
B501-1 1.051 - 1.315
A
B501-11/4 1.316 - 1.660 Catalog No. Uniform Load Tray Width ‘A’
B501-11/2 1.661 - 1.900 lbs (kN) in. (mm) in. (mm)

B501-2 1.901 - 2.375 B409UF-12 800 (3.56) 6 & 9 (152 & 229) 12 (305)
B501-21/2 2.376 - 2.875 B409UF-21 450 (2.00) 12 & 18 (305 & 457) 21 (533)

Vertical Hanger Splice Plates

• Design load is 1500 lbs (6.67kN) per pair.
Catalog No. Outside ‘A’
• Safety Factor of 2.5
Cable Tray Ht. in. (mm)
• Furnished in pairs.
• Hole size: 9/16" (14mm) for 9(*)-8224 4" 3.84 (97.54)
7"
1
/2" threaded rod. (178mm) 9(*)-8225 5" 4.73 (120.14)
• (*) Insert ZN or G 9(*)-8226 6" 5.84 (148.34)
A
9(*)-8227 7" 6.84 (173.74)

Heavy Duty Hold Down Bracket

• Design load is 2000 lbs (8.89kN) per pair.
• Two bolt design.
• Sold in pairs.
• 3
/8" cable tray attachment hardware provided.
• 3
/8" support attachment hardware not provided.
Catalog No.
• (*) Insert ZN or G
• Recommended for support of vertical trays. 9(*)-1241

Heavy Duty Hold Down Bracket

• Design load is 4000 lbs (17.79kN) per pair.
• Four bolt design.
Catalog No.
• Sold in pairs.
• 3
/8" cable tray attachment hardware provided 9(*)-1242
• 3
/8" support attachment hardware not provided.
• (*) Insert ZN or G
• Recommended for support of vertical trays.

Beam Clamp
• Finishes available: ZN GRN HDG or SS4
• Sold in pieces.
• Design load is 1200 lbs (5.34kN) per pair. Catalog No.
• Safety Load Factor 5.0.
B355
• Order HHCS and Channel Nuts separately.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-20 Eaton

Series 2, 3, 4, & 5 Steel - Accessories
Beam Clamp
• Finishes available: ZN or HDG Catalog No. Design Load ‘A’
Series 2, 3, 4, & 5 Steel

lbs (kN) in. (mm)

• Sold in pieces.
• *Design load when used in pairs. A B441-22 1200 (5.34) 33/8 (86)
Safety Load Factor 5.0 B441-22A 1200 (5.34) 5 (127)

B305 Thru B308 & B321 Series Beam Clamps B

• Finishes available: ZN or HDG
• Setscrew included. C
• Safety Load Factor 5.0 D
E
A

F T

Catalog Rod B C D E F T Design Load

Anchor Strap - for B305 thru B308 & B321 Series

Beam Clamp 1/2"-13 Rod & Hex Nut Sold

Separately
• Finish available: ZN
• Design Load 500 lbs. (2.22 kN) Catalog For Flange Width Wt./C
• Safety Load Factor 5.0 J-Hook & Hex No. in. (mm) lbs (kg)
Nut Included
• Recommended torque: B750-J4 3-6 (76.2 - 152.4) 109 (49.4)
'J'-Hook Nut 125 In.-Lbs. (14.1 kN/m) Material:
B750-J6 5-9 (127.0 - 288.6) 124 (56.2)
7 Gauge (4.6)
• Maximum flange thickness
of 3/4" (19mm). B750-J9 8 - 12 (203.2 - 304.8) 135 (61.,2)
11/2" 17/8" B750-J12 11 - 15 (279.4 - 381.0) 147 (66.7)
(38.1) (47.6)

‘J’-Hook
• Finishes available: ZN Catalog 'A' 'TL' Wt./C
• Hex Nut included.
1/2"-13 Threads No. in. (mm ) in. (mm) lbs (kg)

B700-J4 81/2 (215.9) 5 (127.0) 44 (19.9)

‘TL’ B700-J6 111/2 (292.1) 6 (152.4) 53 (24.0)
Thread Length

‘A’
B700-J9 121/4 (368.3) 6 (152.4) 63 (28.6)
B700-J12 171/2 (444.5) 6 (152.4) 78 (35.4)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-21 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Accessories
Covers

Series 2, 3, 4, & 5 Steel

Solid Non-Flanged Solid Flanged Ventilated Flanged Peaked Flanged 2 to 3 Pitch
Peaked Flanged
(See page APP-4)

A full range of covers is available for straight sections and fittings.

Solid covers should be used when maximum enclosure of the cable is desired and no accumulation of heat is expected.
Ventilated covers provide an overhead cable shield, yet allow heat to escape.
We recommend that covers be placed on vertical cable tray runs to a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor to
isolate both cables and personnel. Flanged covers have a 1/2 in. (13 mm) flange. Cover clamps are not included with the cover and must
be ordered separately. All peaked covers are flanged. Standard peaked covers have 1/2" peak. Special purpose peaked covers, having a
2 to 3 pitch, provide additional slope and material thickness. The 2 to 3 pitch fitting covers are of multiple piece, welded construction.

Steel Cover Part Numbering

Prefix

Example: 80 2 P - 24 - 144

Cover Type Detail Material Tray Width Item Description

80 = Solid 2 = Flanged Steel (248,258, 268 P = Pre-Galvanized 06 = 6" For Straight Section Cover:
81 = Ventilated straight sections and all fittings) (Not available in 09 = 9" Pre-Galvanized Only
82 = Peaked 3 = Flanged Steel (all straight Type 83) 12 = 12" 144 = 12 ft. (3.66 m)
sections except 248, 258, 268) G = HDGAF 18 = 18" 120 = 10 ft. (3.05 m)
4 = Non-Flanged Steel (80 & 81 24 = 24" Pre-Galvanized & HDGAF
type only) 30 = 30" 72 = 6 ft. (1.83 m)
36 = 36" 60 = 5 ft. (1.52 m)
For fitting covers: Insert suffix
of fitting to be covered.
See example below.

Examples of Catalog Numbers for Fitting Covers:

Horizontal Bend Cover Vertical Bend Cover

Prefix Suffix Prefix Suffix
80 2 P - 18 - 90 HB 24 80 2 G - 24 - 90 VO 24 - 4*
Side Rail*
Radius Height
Fitting Radius
Angle Fitting
Width Angle
Material Width
Detail Material
Cover Type Detail
Cover Type

* Required for VO fittings only

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems J-22 Eaton

Series 2, 3, 4, & 5 Steel - Accessories
Standard Cover Clamp Tray Type Catalog No. Side Rail Height
• For indoor service only. in. (mm)
Series 2, 3, 4, & 5 Steel

• Screw included. 9(*)-9014 4 (101)

• Sold per piece. 9(*)-9015 5 (127)
• (*) Insert ZN or G Steel
9(*)-9016 6 (152)
9(*)-9017 7 (78)

Combination Cover and Hold Down Clamp

Tray Type Catalog No. Side Rail Height
• Sold per piece. in. (mm)
• For indoor service only.
9(*)-9043 4 (101)
• (*) Insert P or G
9(*)-9053 5 (127)
Steel
9(*)-9063 6 (152)
9(*)-9073 7 (78)

Raised Cover Clamp

Tray Type Catalog No. Tray Type
• For indoor service only.
• For use with flanged covers only. 9ZN-9114-† Series 2 Steel Straight Section
† Specify gap of 1", 2", 3" or 4". 9ZN-9115-† Series 3 & 4 Steel Straight Section
9ZN-910† All Steel Fittings (Also Series 1
Steel Straight Sections)

Heavy Duty Cover Clamp

• Recommended for outdoor service. Peaked Cover Clamp Catalog No. Side Rail Height
• (‡) Insert tray width in. mm
† Add P to Catalog No.
for peaked cover clamp. 9(*)-(‡)-9044† 4 (101)
• (*) Insert P or G 9(*)-(‡)-9054† 5 (127)
9(*)-(‡)-9064† 6 (152)
9(*)-(‡)-9074† 7 (178)

Quantity of Standard Cover Clamps Required

Cover Joint Strip

• Used to join covers
• Plastic Catalog No.
• (‡) Insert tray width
99-9980-(‡)

Cable Cleats
(see pages O-1 thru O-5) Standard

Trefoil Single
Cable Cable
Cleats Cleats

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton J-23 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 Steel - Specifications

Section 1- Acceptable Manufacturers

Series 2, 3, 4, & 5 Steel

1.01 Manufacturer: Subject to compliance with these specifications, Eaton’s B-Line series cable tray systems shall be as
manufactured by Eaton.

Section 2- Cable Tray Sections and Components

2.01 General: Except as otherwise indicated, provide metal cable trays, of types, classes and sizes indicated;
with splice plates, bolts, nuts and washers for connecting units. Construct units with rounded edges
and smooth surfaces; in compliance with applicable standards; and with the following additional
construction features. Cable tray shall be installed according to the latest revision of NEMA VE 2.
2.02 Pre-Galvanized Steel: Straight sections, fitting side rails, rungs, and covers shall be made from
structural quality steel meeting the minimum mechanical properties and mill galvanized in accordance
with ASTM A653 SS, Grade 33, coating designation G90. Hardware finish shall be electrogalvanized
zinc per ASTM B633.
2.03 Hot Dip Galvanized Steel: All side rails, covers, splice plates, and rungs shall be made from structural
quality steel meeting the minimum mechanical properties of ASTM A1011 SS, Grade 33 for 14 gauge
and heavier, ASTM A1008, Grade 33 Type 2 for 16 gauge and lighter, and shall be hot dip galvanized
after fabrication in accordance with ASTM A123. Mill galvanized covers are not acceptable for hot dip
galvanized cable tray. Hardware finish shall be chromium zinc per ASTM F-1136-88.
2.04 Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members
(rungs) welded to the side rails. Rungs shall be spaced [6] [9] [12] inches apart. Rung spacing in
radiused fittings shall be industry standard 9" and measured at the center of the tray’s width. No
portion of the rungs shall protrude below the bottom plane of the side rails. Each rung must be
capable of supporting a 200 lb. concentrated load at the center of the cable tray over and above the
cable load with a safety factor of 1.5.
2.05 Ventilated Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated
bottom welded to the side rails or rungs spaced 4" apart. The peaks of the corrugated bottom
shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers. To
provide ventilation in the tray, the valleys of the corrugated bottom shall have 21/4" x 4" rectangular
holes punched along the width of the bottom.
2.06 Non-Ventilated Bottom Trough Cable Trays shall consist of two longitudinal members (side rails) with a
corrugated bottom welded to the side rails or a solid sheet over rungs. The peaks of the corrugated
bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers.
2.07 Cable tray loading depth shall be [3] [4] [5] [6] inches per NEMA VE 1.
2.08 Straight sections shall have side rails fabricated as I-beams. Straight sections shall be supplied in
standard [12 foot] [24 foot] [10 foot (3 m)] [20 foot (6 m)] lengths.
2.09 Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.
2.10 Splice plates shall be manufactured of high strength steel, meeting the minimum mechanical properties
of ASTM A1011 HSLAS, Grade 50, Class 1 and be secured with 8 nuts and bolts per plate. The
resistance of fixed splice connections between an adjacent section of tray shall not exceed 0.00033 ohm.
2.11 All fittings must have a minimum radius of [12] [24] [36] [48] inches.

Section 3- Loading Capacities and Testing

3.01 Cable tray shall be capable of carrying a uniformly distributed load of ______ lbs./ft. on a _______ ft.
support span with a safety factor of 1.5 when supported as a simple span and tested per NEMA
VE 1 5.2. In addition to the uniformly distributed load the cable tray shall support 200 lbs. concentrated
load at mid-point of span. Load and safety factors specified are applicable to both the side rails and
rung capacities. Cable tray shall be made to manufacturing tolerances as specified by NEMA.
3.02 Upon request, manufacturer shall provide test reports in accordance with the latest revision of
NEMA VE 1 or CSA C22.2 No. 126.

B-Line series Cable Tray Systems J-24 Eaton

Series 3 & 4 Stainless Steel - Straight Sections
Series 3 & 4 Stainless Steel

Eaton K-1 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Accessories

For Stainless Steel Fittings

see fittings section pages L-1 thru L-17

Series 3 & 4 Stainless Steel

How The Service Advisor Works
We know that your time is important! That’s why the color-coding system in this catalog is designed to help you
select products that fit your service needs. Products are marked to indicate the typical lead time for orders of 50
pieces or less.
Customer: How do I select my straight sections. covers, or fittings so that I get the quickest turnaround?
Service Advisor: Each part of our selection chart is shown in colors. If any section of a part number is a different
color, the part will typically ship with the longer lead time represented by the colors.
Green = Fastest shipped items
Black = Normal lead-time items
Red = Normally long lead-time items
Example: 348SS4 09 - 12 - 144 Part will have a long
lead time.

B-Line series Cable Tray Systems K-2 Eaton

Series 3 & 4 Stainless Steel - Straight Sections

3" NEMA VE 1 Loading Depth

4" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 348 SS6 09 - 24 - 144

Series Material Type Width Length

SS4 = 304 Ladder- 06 = 6" ¨ 144 = 12 ft.
Series 3 & 4 Stainless Steel

¡
348 348
Stainless Steel 06 = 6" rung spacing 09 = 9" 120 = 10 ft.
SS6 = 316 09 = 9" rung spacing 12 = 12"
Stainless Steel 12 = 12" rung spacing 18 = 18" ¨Primary Length.
24 = 24" ¡Secondary Length.
For side rail & rung
data, see chart on
pages APP-6 30 = 30"
& APP-7 See page C-23 for
Rung Trough- 36 = 36"
Spacing explanation of lengths.
6" and Wider
04 = Vented Bottom Passivation available
Width
(Inside) SB = Non-Ventilated see page C-2.
Overall Width
(Width + 13/8”)
See page APP-1 for additional rung options. *Special sizes available.

Ladder Type Vented Bottom Non-Ventilated

(Specify Rung Spacing)

Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable being installed.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.50 NEMA: 16A, 12C 10 180 0.0042 3.0 268 0.072
CSA: C1-3m 12 125 0.009 Area = 0.74 in2 3.7 186 0.148 Area = 4.77 cm2
348 3.13 14 92 0.016 Sx = 0.79 in3 4.3 137 0.275 Sx = 12.95 cm3
4.19
SS† UL Cross-Sectional 16 70 0.027 Ix = 1.85 in4 4.9 105 0.469 Ix = 77.00 cm4
Area: 0.40 in2 18 56 0.044 5.5 83 0.752
18 gauge 20 45 0.067 6.1 67 1.145
When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors:
Ix = Moment of Inertia, Sx = Section Modulus. † Insert 4 for 304 stainless steel or 6 for 316 stainless steel.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-3 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Straight Sections

4" NEMA VE 1 Loading Depth

5" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 358 SS6 09 - 24 - 144

Series Material Type Width Length

SS4 = 304 Ladder- 06 = 6" ¨ 144 = 12 ft.

Series 3 & 4 Stainless Steel

¡
358 358
Stainless Steel 06 = 6" rung spacing 09 = 9" 120 = 10 ft.
SS6 = 316 09 = 9" rung spacing 12 = 12"
Stainless Steel 12 = 12" rung spacing 18 = 18" ¨Primary Length.
24 = 24" ¡Secondary Length.
For side rail & rung
data, see chart on
pages APP-6 30 = 30"
& APP-7 See page C-23 for
Rung Trough- 36 = 36"
Spacing explanation of lengths.
6" and Wider
04 = Vented Bottom Passivation available
Width
(Inside) SB = Non-Ventilated see page C-2.
Overall Width
(Width + 13/8”)
See page APP-1 for additional rung options. *Special sizes available.

Ladder Type Vented Bottom Non-Ventilated

(Specify Rung Spacing)

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.50 NEMA: 20A, 16B 10 248 0.0025 3.0 369 0.043
CSA: 89kg/m 6.1m 12 172 0.0052 Area = 0.83 in2 3.7 256 0.089 Area = 5.35 cm2
358 4.13 14 127 0.010 Sx = 1.09 in3 4.3 188 0.164 Sx = 17.86 cm3
5.19
SS† UL Cross-Sectional 16 97 0.016 Ix = 3.10 in4 4.9 144 0.280 Ix = 129.03 cm4
Area: 0.70 in2 18 77 0.026 5.5 114 0.448
18 gauge 20 62 0.040 6.1 92 0.684
When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors:
Ix = Moment of Inertia, Sx = Section Modulus. † Insert 4 for 304 stainless steel or 6 for 316 stainless steel.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems K-4 Eaton

Series 3 & 4 Stainless Steel - Straight Sections
5" NEMA VE 1 Loading Depth
6" Side Rail Height

Straight Section Part Numbering

Prefix
Example: 358 SS6 09 - 24 - 144

Series Material Type Width Length

SS4 = 304 Ladder- 06 = 6" ¨144 = 12 ft.
¡
368 368
Series 3 & 4 Stainless Steel

Stainless Steel 06 = 6" rung spacing 09 = 9" 120 = 10 ft.

SS6 = 316 09 = 9" rung spacing 12 = 12" ¨ 144 = 12 ft.
¡ 120 = 10 ft.
464 464
Stainless Steel 12 = 12" rung spacing 18 = 18"
For side rail & rung 24 = 24" ¨Primary Length.
data, see chart on
pages APP-6 30 = 30" ¡Secondary Length.
& APP-7
Rung
Spacing
Trough- 36 = 36" See page C-23 for
6" and Wider explanation of lengths.
04 = Vented Bottom
Width
(Inside) SB = Non-Ventilated Passivation available
Overall Width see page C-2.
(Width + 13/8”)
See page APP-1 for additional rung options. *Special sizes available.

Ladder Type
Vented Bottom Non-Ventilated
(Specify Rung Spacing)
Values are based on simple beam tests per NEMA VE 1 on 36" wide cable tray rungs spaced on 12" centers. Cable trays will
support without collapse a 200 lb. (90.7 kg) concentrated load over and above published loads. Published load safety factor is 1.5.
To convert 1.5 safety factor to 2.0, multiply published load by 0.75. To obtain mid-span deflection, multiply a load by the deflection
multiplier. Cable tray must be supported on spans shorter than or equal to the length of the cable being installed.

B-Line Side Rail NEMA, CSA & UL Span Load Deflection Design Factors Span Load Deflection Design Factors
Series Dimensions Classifications ft lbs/ft Multiplier for Two Rails meters kg/m Multiplier for Two Rails
1.50 NEMA: 20C+ 12 342 0.002 3.7 508 0.036
CSA: E-6m 16 192 0.007 Area = 1.49 in2 4.9 286 0.113 Area = 9.61 cm2
464 5.11 18 152 0.011 Sx = 2.28 in3 5.5 226 0.182 Sx = 37.36 cm3
6.19
SS† UL Cross-Sectional 20 123 0.016 Ix = 7.65 in4 6.1 183 0.277 Ix = 318.42 cm4
Area: 1.00 in2 22 102 0.024 6.7 151 0.406
18 gauge 24 85 0.034 7.3 127 0.574
When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%. Design factors:
Ix = Moment of Inertia, Sx = Section Modulus. † Insert 4 for 304 stainless steel or 6 for 316 stainless steel.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-5 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Accessories
Splice Plates
• Standard 8-hole pattern for all steel splice plates.
• Furnished in pairs with hardware.
• One pair including hardware provided with straight section. Catalog No. Height
in. mm
(Expansion splice quantity subtracted)
• Boxed in pairs with hardware. 9(*)-8004 4 (101)
• (*) Insert SS4 or SS6 9(*)-8005 5 (127)
9(*)-8006 6 (152)

Expansion Splice Plates

• Expansion plates allow for one inch expansion or
contraction of the cable tray, or where expansion
Catalog No. Height

Series 3 & 4 Stainless Steel

joints occur in the support structure.
in. mm
• Furnished in pairs with hardware.
• Bonding Jumpers are required on each side rail. 9(*)-8014 4 (101)
Order Separately. 9(*)-8015 5 (127)
• (*) Insert SS4 or SS6 9(*)-8016 6 (152)
For heavy duty expansion splice plates see page APP-3.

Universal Splice Plates

• Used to splice to existing cable tray
systems.
• Furnished in pairs with hardware. Catalog No. Height
• (*) Insert SS4 or SS6 in. mm

9(*)-8004-1/2 4 (101)
9(*)-8005-1/2 5 (127)
9(*)-8006 -1/2 6 (152)

Step Down Splice Plates

• These splice plates are offered for connecting cable
tray sections having side rails of different heights.
• Furnished in pairs with hardware. Catalog No. Height
in. mm
• (*) Insert SS4 or SS6
9(*)-8045 5 to 4 (127 to 101)
9(*)-8046 6 to 4 (152 to 101)
9(*)-8060 6 to 5 (152 to 127)

Vertical Adjustable Splice Plates

• These plates provide for changes in elevation that
do not conform to standard vertical fittings.
• Furnished in pairs with hardware. Catalog No. Height
in. mm
• Bonding Jumpers not required.
• (*) Insert SS4 or SS6 9(*)-8024 4 (101)
9(*)-8025 5 (127)
9(*)-8026 6 (152)
Requires supports within 24” on both sides, per NEMA VE 2.

Branch Pivot Connectors

• Branch from existing cable tray runs at any point.
• Pivot to any required angle.
Catalog No. Height
• UL Classified for grounding in. mm
(bonding jumpers not required).
• Furnished in pairs with hardware. 9(*)-8244 4 (101)
• (*) Insert SS4 or SS6 9(*)-8245 5 (127)
9(*)-8246 6 (152)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems K-6 Eaton

Series 3 & 4 Stainless Steel - Accessories
Horizontal Adjustable Splice Plates L
• Offered to adjust a cable tray run for changes in L
direction in a horizontal plane that do not conform
to standard horizontal fittings. 9(*)-803(X)
Splice only
• Furnished in pairs with hardware.
• Bonding jumpers not required. 9(*)-803(X)-12 or 9(*)-803(X)-36
One pair splice plates with extensions.
• (*) Insert SS4 or SS6
• (X) Insert 4, 5, 6 or 7 for side rail height.
Catalog Cable Tray Thru Tray Width ‘L’
No. End Cut in. (mm) in. (mm)

9(*)-803(X) Mitered 36 (914) N/A (NA)

9(*)-803(X)-12 Not mitered 12 (305) 16 (406)
Requires supports within 24” on both sides, per NEMA VE 2. 9(*)-803(X)-36 Not mitered 36 (914) 41 (1041)
Series 3 & 4 Stainless Steel

Offset Reducing Splice Plate

• This plate is used for joining cable trays having different
widths. When used in pairs they form a straight reduction;
when used singly with a standard splice plate, they form
Catalog No. Height
an offset reduction. in. mm
• Furnished as one plate with hardware.
9(*)-8064-(‡) 4 (101)
• (‡) Insert reduction
9(*)-8065-(‡) 5 (127)
• (*) Insert SS4 or SS6
9(*)-8066-(‡) 6 (152)

Tray to Box Splice Plates

• Used to attach the end of a cable tray run to a Catalog No. Height
distribution box or control panel. in. mm
• Furnished in pairs with hardware.
9(*)-8054 4 (101)
• (*) Insert SS4 or SS6
9(*)-8055 5 (127)
9(*)-8056 6 (152)

Frame Type Box Connector

• Designed to attach the end of a cable tray run to a
distribution cabinet or control center to help Catalog No. Height
reinforce the box at the point of entry. in. mm

• Furnished with tray connection hardware. 9(*)-8074-(‡) 4 (101)

• (*) Insert SS4 or SS6 9(*)-8075-(‡) 5 (127)
• (‡) Insert tray width 9(*)-8076-(‡) 6 (152)

Blind End
• This plate forms a closure for a dead end cable tray.
Catalog No. Height
• Furnished as one plate with hardware. in. mm
• (*) Insert SS4 or SS6
• (‡) Insert tray width 9(*)-8084-(‡) 4 (101)
9(*)-8085-(‡) 5 (127)
9(*)-8086-(‡) 6 (152)

Cross Connector Bracket

• For field connecting crossing section.
• Furnished in pairs with 3/8" hardware.
• (*) Insert SS4 or SS6

Catalog No.
9(*)-1240

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-7 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Accessories
Standard Tray Hardware (for field installation drill 13/32” hole)

Catalog No. Description

RNCB 3/8” x 3/4” SS6 Ribbed Neck Carriage Bolt AISI 316 Stainless Steel
SFHN 3/8”-16 SS6 Serrated Flange Hex Nut AISI 316 Stainless Steel

Conduit to Cable Tray Adaptor

• For easy attachment of conduit terminating
at a cable tray.

Series 3 & 4 Stainless Steel

• Use on aluminum or steel cable trays.

Catalog No. Conduit Size

in. mm
Steel I-Beam 9G-1158-1/2, 3/2 1/2, 3/4 (15, 20)
9G-1158-1, 11/4 1, 11/4 (25, 32)
9G-1158-11/2, 2 11/2, 2 (40, 50)
9G-1158-21/2, 3 21/2, 3 (65, 80)
9G-1158-31/2, 4 31/2, 4 (90, 100)

Conduit to Cable Tray Adaptor

• Assembly required.
• Mounting hardware included.
• Conduit clamps provided.
• (‡) = Insert conduit size (1/2" thru 4").

Catalog No.
9SS4-1150-(‡)

Conduit to Cable Tray Adaptor

• Assembly required.
• Conduit clamps included.
• (‡) = Insert conduit size (1/2" thru 4").

Catalog No.
9SS4-1155-(‡)

Cable Tie (Ladder Tray)

• Nylon ties provide easy attachment of cable to ladder
rungs; maximum cable O.D. is 3" (76mm).

Overall Length 15" (381mm) Catalog No.

99-2125-15

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems K-8 Eaton

Series 3 & 4 Stainless Steel - Accessories
Ladder Drop-Out
• Specially-designed Ladder Drop-Outs provide a rounded
surface with 4" (101 mm) radius to protect cable as it exits
from the cable tray, preventing damage to insulation.
The drop-out will attach to any desired rung.
• (*) Insert SS4 or SS6
• (‡) Insert tray width
Catalog No.
9(*)-1104-(‡)

Barrier - Straight Section

• Length: Insert 120 for [120” - 10 ft.] (3.0 m)
Series 3 & 4 Stainless Steel

or 144 for [144" - 12 ft.] (3.6 m)

• Order catalog number based on loading depth.
• Furnished with four #10 x 1/2" plated Catalog Side Rail Loading
H
self-drilling screws and a 99-9982 Barrier Strip Splice. No. Height Depth 'H'
• (*) Insert SS4 or SS6 in. mm in. mm
73(*)-Length 4 (101) 3 (76)
74(*)-Length 5 (127) 4 (101)
75(*)-Length 6 (152) 5 (127)

Barrier - Horizontal Bend

• Horizontal Bend Barriers are flexible in order
to conform to any horizontal fitting radius.
Can be cut to desired length.
• Standard length is 72" [6 ft.] (1.8 m) - sold individually Catalog Side Rail Loading
• Order catalog number based on loading depth. H No. Height Depth 'H'
in. mm in. mm
• Furnished with three #10 x 1/2" plated
self-drilling screws and a 99-9982 Barrier Strip Splice. 73(*)-90HBFL 4 (101) 3 (76)
• (*) Insert SS4 or SS6 74(*)-90HBFL 5 (127) 4 (101)
75(*)-90HBFL 6 (152) 5 (127)

Barrier - Vertical Outside Bend

• Vertical Outside Bend Barriers are preformed to conform H
to a specific vertical outside bend fitting.
• Furnished with three #10 x 1/2" plated self-drilling
screws and a 99-9982 Barrier Strip Splice. Catalog Side Rail Loading
• (*) Insert or No. Height Depth 'H'
• (**) Insert 30, 45, 60 or 90 for degrees Outside Bend in. mm in. mm
• (†) Insert 12, 24, 36 or 48 for radius (VO)
73(*)-(**)VO(†) 4 (101) 3 (76)
74(*)-(**)VO(†) 5 (127) 4 (101)
75(*)-(**)VO(†) 6 (152) 5 (127)

Barrier - Vertical Inside Bend

• Vertical Inside Bend Barriers are preformed to conform
to a specific vertical inside bend fitting.
• Furnished with three #10 x 1/2" plated self-drilling
screws and a 99-9982 Barrier Strip Splice. Catalog Side Rail Loading
• (*) Insert or No. Height Depth 'H'
• (**) Insert 30, 45, 60 or 90 for degrees in. mm in. mm
• (†) Insert 12, 24, 36 or 48 for radius 73(*)-(**)VI(†) 4 (101) 3 (76)
Inside Bend 74(*)-(**)VI(†) 5 (127) 4 (101)
H
(VI)
75(*)-(**)VI(†) 6 (152) 5 (127)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-9 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Accessories
Barrier Strip Clip
• Barrier clip fastens to either aluminum or steel ladder rung.
• Furnished with one #10 x 1/2" zinc plated self-drilling screw.
• (*) Insert SS4 or SS6

Catalog No.
9(*)-9002

Barrier Strip Splice

• 2.85" (72.4mm) long
• Ribbed edge for increased rigidity and grip

Series 3 & 4 Stainless Steel

• Comfort edge for ease of installation
• Slotted top window with center mark for
accurate placement and inspection capability Catalog No.
• Patent pending 99-9982

Thread Rod (ATR) & Rod Couplings

Size Catalog No. Available Length Loading
Loading based on safety factor 5.
All Threaded Rod
Standard Finish: Zinc plated
See B-Line series Strut Systems
/8"-16
3
ATR 3/8" x Length 36", 72", 120", 144" 730 lbs.
Catalog for other sizes and finishes. /2"-13
1
ATR 1/2" x Length 36", 72", 120", 144" 1350 lbs.
Rod Coupling
3
/8"-16 B655-3/8" NA 730 lbs.
B655 ATR 1
/2"-13 B655-1/2" NA 1350 lbs.
Rod Coupling All Threaded Rod

Stainless Steel Cable Clamp

Catalog No. Cable Size
• Fits with series 2, 3, 4 & 5 standard steel rungs. in. mm

• Shipped flat. Field form around the cable 9SS4-4050 0.50 - 0.75 (13 - 19)
at the time of installation. 9SS4-4075 0.75 - 1.00 (19 - 25)
9SS4-4100 1.00 - 1.25 (25 - 32)
9SS4-4125 1.25 - 1.50 (32 - 38)
9SS4-4150 1.50 - 1.75 (38 - 45)
9SS4-4175 1.75 - 2.00 (45 - 51)
9SS4-4200 2.00 - 2.25 (51 - 57)
9SS4-4225 2.25 - 2.50 (57 - 64)
9SS4-4250 2.50 - 2.75 (64 - 70)
9SS4-4275 2.75 - 3.00 (70 - 76)
Refer to Section CF
Cable Fixing
9SS4-4300 3.00 - 3.25 (76 - 82)
9SS4-4325 3.25 - 3.50 (82 - 89)
9SS4-4350 3.50 - 3.75 (89 - 95)
9SS4-4375 3.75 - 4.00 (95 - 100)
9SS4-4400 4.00 - 4.25 (100 - 106)
9SS4-4425 4.25 - 4.50 (106 - 113)
9SS4-4450 4.50 - 4.75 (113 - 121)
9SS4-4475 4.75 - 5.00 (121 - 125)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems K-10 Eaton

Series 3 & 4 Stainless Steel - Accessories
Cable Tray Clamp/Guide
• Features a no-twist design.
• Has four times the strength of the traditional design. When installing this device as an expansion guide on the
outside flange of Steel Side Rail, use the Catalog No. B202
• Each side is labeled to ensure proper installation.
Square Washer in order to properly elevate the guide.
• Furnished in pairs without hardware.
• Not recommended for vertical support.
Note: For heavy duty or vertical applications
see 9(*)-1241 or 9(*)-1242 page HAT-20
Patent # RE35479

Catalog No.
Without With Overall Hardware
Hardware Hardware Length Size Finish
in. (mm) in.
Series 3 & 4 Stainless Steel

9SS6-1205 -- 21/4 (57) 1/2" 316SS

Length Length
9ZN-1204 shown. 9ZN-1208 shown.
Installed as a guide. Installed as a clamp.

Vertical Hanger Splice Plates

• Design load is 1500 lbs (6.67kN) per pair.
• Safety Factor of 2.5
Catalog No. Outside 'A'
• Furnished in pairs.
Cable Tray Ht. in. (mm)
• Hole size: 9/16” (14mm) for
1/2” threaded rod. 9(*)-8224 4" 3.84 (97.54)
7"
• (*) Insert SS4 or SS6 (178mm) 9(*)-8225 5" 4.73 (120.14)
9(*)-8226 6" 5.84 (148.34)
A
9(*)-8227 7" 6.84 (173.74)

Cable Tray Clamp

Catalog No. Finish

9SS4-1249HD 304SS
9SS6-1249HD 316SS

Cable Tray Guide

• Expansion guide for single or double cable tray runs.
• Guide allows for longitudinal movement of the cable tray.
• No field drilling of support I-beam or channel is required.
• Guides are required on both sides of cable tray to prevent
lateral movement - can be placed on either the inside or
outside flange of cable tray.
• Guides are sold in pieces - two guides are required per tray.
• Maximum flange thickness 11/8" (28.58 mm). Catalog No. Finish
• (*) Insert SS4 or SS6 9SS4-1249 304SS
9SS6-1249 316SS

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-11 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Accessories
Nylon Pad
• Use for friction reduction.
1/8"
• Hardness: Shore D80.
(3mm)
• Low friction coefficient.
• UV resistant.
• Excellent weatherability. 6"
• UL - 94HB. (152mm)
3" Catalog No.
(76mm)
99-PE36

Neoprene Roll
• Use for material isolation.

Series 3 & 4 Stainless Steel

• 1/8" x 2" x 25' roll.
• Hardness: Shore A60. Catalog No.
• Good weatherability. 99-NP300

Catalog No. Height x Width x Length

in. (mm)

DB10-28 55/8 x 6 x 28.0 (143 x 152 x 711)

DB10-36 55/8 x 6 x 36.0 (143 x 152 x 914)
DB10-42 55/8 x 6 x 42.0 (143 x 152 x 1067)
DB10-50 55/8 x 6 x 50.0 (143 x 152 x 1270)
DB10-60 55/8 x 6 x 60.0 (143 x 152 x 1524)

LEEDS credit available, base made from 100% recycled material.

General Note: Consult roofing manufacturer or engineer for roof load

capacity. The weakest point may be the insulation board beneath
the rubber membrane.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems K-12 Eaton

Series 3 & 4 Stainless Steel - Accessories
Trapeze Support Kit
• Eaton’s B-Line series trapeze kits provide the components
required for a single trapeze support in one package. These kits
are available in Type 304 or Type 316 stainless steel.
• The SH channel provides the convenience of pre-punched
slots, which eliminate the need for field drilling.
• The illustrated hardware is sealed in a plastic bag and boxed
with the channel, which is pre-cut to the appropriate length Catalog Tray Channel Uniform
as shown in the chart. No. Width Length Load
• Designed for use with in. mm in. mm lbs kN
1/2" threaded rod. (2) 1/2" x 7/8" Hex 9(*)-5506-22SH(†) 6 (152) 16 (406) 1350 (6.00)
Order rod separately. Head Cap Screw
(2) 9ZN-1205 9(*)-5509-22SH(†) 9 (229) 18 (457) 1250 (5.56)
Hold-Down Guide Clamp
9(*)-5512-22SH(†) 12 (305) 22 (559) 1125 (5.00)
Series 3 & 4 Stainless Steel

(4) 1/2" Hex Nut 9(*)-5518-22SH(†) 18 (457) 28 (711) 865 (3.85)

(2) N525WO
Channel Nut (4) B202
9(*)-5524-22SH(†) 24 (610) 34 (864) 700 (3.11)
Square Washer 9(*)-5530-22SH(†) 30 (762) 40 (1016) 590 (2.62)
9(*)-5536-22SH(†) 36 (914) 46 (1168) 510 (2.27)
9(*)-5542-22SH(†) 42 (1067) 52 (1321) 450 (2.00)
(1) B22 Channel cut
to the required length • (*) Insert SS4 or SS6
• (†) Insert 3/8 for 3/8" threaded rod hardware.
Safety factor of 3.0 on all loads.

Heavy Duty Trapeze Support Kit

• Eaton’s B-Line series trapeze kits provide the components required
for a single trapeze support in one package. These kits are
available in Type 304 or Type 316 stainless steel.
• The SH channel provides the convenience of pre-punched slots,
which eliminates the need for field drilling.
• The illustrated hardware is sealed Catalog Tray Channel Uniform
in a plastic bag and boxed with the No. Width Length Load
(2) 9ZN-1205
channel, which is pre-cut to the in. mm in. mm lbs kN
Hold-Down Guide Clamp
appropriate length as shown 9(*)-5506-22SHA 6 (152) 16 (406) 1350 (6.00)
in the chart. (2) N525WO
9(*)-5509-22SHA 9 (229) 18 (457) 1350 (6.00)
Channel Nut
• Designed for use with 9(*)-5512-22SHA 12 (305) 22 (559) 1350 (6.00)
1/2" threaded rod.
9(*)-5518-22SHA 18 (457) 28 (711) 1350 (6.00)
Order rod separately.
9(*)-5524-22SHA 24 (610) 34 (864) 1350 (6.00)
9(*)-5530-22SHA 30 (762) 40 (1016) 1350 (6.00)
(2)1/2"
x 7/8"
Hex 9(*)-5536-22SHA 36 (914) 46 (1168) 1350 (6.00)
Head Cap Screw 9(*)-5542-22SHA 42 (1067) 52 (1321) 1350 (6.00)
(1) B22 Channel cut to
the required length • (*) Insert SS4 or SS6
(4) B202 Square Washer Safety factor of 3.0 on all loads.
(4) 1/2" Hex Nut

Trapeze Hardware Kit

Catalog No. 9SS4-5500-1/2 9SS6-5500-1/2

1 pr. 9SS6-1205 1 pr. SS6-1205
2 HHC Screw 1/2 x 7/8 SS4 2 HHC Screw 1/2 x 7/8 SS6
In plastic bag 2 N525 WO SS6 2 N525 WO SS6
4 B202 SS4 1/2" sq washer 4 B202 SS6 1/2" sq washer
4 HN 1/2 SS4 4 HN 1/2" SS6

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-13 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Accessories
Bracket (12”-42”)
• (*) Insert available finish:
SS4 or SS6
• Safety Load Factor 2.5

A Catalog Uniform Load Tray Width 'A' 'H'

H
No. lbs (kN) in. (mm) in. (mm) in. (mm)
83/4 (222)

Series 3 & 4 Stainless Steel

B494-12 2500 (11.12) 6 & 9 (152 & 229) 12 (305)
B494-18 1700 (7.56) 12 (305) 18 (457) 83/4 (222)
B494-24 1300 (5.78) 18 (457) 24 (610) 83/4 (222)
Bottom brace is B42 channel on B494-30 1600 (7.11) 24 (610) 30 (762) 111/4 (286)
B494-24 and smaller and B494-36 1100 (4.89) 30 (762) 36 (914) 111/4 (286)
B22 channel on B494-30 and larger
B494-42 980 (4.36) 36 (914) 42 (1067) 16 (406)
B494-48 980 (4.36) 42 (1067) 48 (1219) 16 (406)

For more dimensional data see Strut Systems catalog

Cantilever Bracket
• (*) Insert available finish:
SS4 or SS6
• Safety Load Factor 2.5

Catalog No. Uniform Load Tray Width 'A'

lbs kN in. mm in. mm
B409-12(*) 960 (4.27) 6 & 9 (152 & 229) 12 (305)
B409-18(*) 640 (2.84) 12 (305) 18 (457)
B409-24(*) 480 (2.13) 18 (457) 24 (610)

Cantilever Bracket
• (*) Insert available finish:
SS4 or SS6
• Safety Load Factor 2.5
Catalog No. Uniform Load Tray Width 'A'
lbs kN in. mm in. mm
A B297-12(*) 1660 (7.38) 6 & 9 (152 & 229) 12 (305)
B297-18(*) 1100 (4.89) 12 (305) 18 (457)
B297-24(*) 835 (3.71) 18 (457) 24 (610)
B297-30(*) 665 (2.93) 24 (610) 30 (762)
B297-36(*) 550 (2.44) 30 (762) 36 (914)
B297-42(*) 465 (2.06) 36 (914) 42 (1067)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems K-14 Eaton

Series 3 & 4 Stainless Steel - Accessories
Heavy Duty Hold Down Bracket
• Design load is 2000 lbs (8.89kN) per pair.
• Two bolt design.
• Sold in pairs.
• 3
/8" cable tray attachment hardware provided.
• 3
/8" support attachment hardware not provided.
• (*) Insert SS4 or SS6
• Recommended for support of vertical trays.
Catalog No.
9(*)-1241

Heavy Duty Hold Down Bracket

Series 3 & 4 Stainless Steel

• Design load is 4000 lbs (17.79kN) per pair.

• Four bolt design.
• Sold in pairs.
• 3
/8" cable tray attachment hardware provided
• 3
/8" support attachment hardware not provided.
• (*) Insert SS4 or SS6
• Recommended for support of vertical trays. Catalog No.
9(*)-1242

Beam Clamp
• Finishes available: SS4
• Sold in pieces.
• Design load is 1200 lbs (5.34kN) per pair.
• Safety Load Factor 5.0.
• Order HHCS and Channel Nuts separately.

Catalog No.
B355SS4

Beam Clamp
• (*) Insert SS4 or SS6
• Sold in pieces.
• *Design load when used in pairs.
Safety Load Factor 5.0 A

Catalog No. Design Load ‘A’

lbs (kN) in. (mm)
B441-22(*) 1200 (5.34) 33/8 (86)
B441-22A(*) 1200 (5.34) 5 (127)

Beam Clamp
• Finishes available: SS4
• Sold in pieces.
• *Design load when used in pairs.
Safety Load Factor 5.0 Catalog No. B212-1/4SS4 B212-3/8SS6
Design Load * 600 lbs. (2.67kN) 1000 lbs. (4.45 kN)
Max. Flange Thick 3
/4" (19 mm) 11/8" (28.6 mm)
Mat’l. Thickness 1
/4" (6.3 mm) 3
/8" (9.5 mm)

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-15 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Accessories
Covers

Solid Non-Flanged Solid Flanged Ventilated Flanged Peaked Flanged 2 to 3 Pitch Peaked Flanged
(See page APP-4)

A full range of covers is available for straight sections and fittings.

Series 3 & 4 Stainless Steel

Solid covers should be used when maximum enclosure of the cable is desired and no accumulation of heat is expected.
Ventilated covers provide an overhead cable shield yet allow heat to escape.
We recommends that covers be placed on vertical cable tray runs to a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor to
isolate both cables and personnel. Flanged covers have a 1/2 in. (13 mm) flange. Cover clamps are not included with the cover and
must be ordered separately. All peaked covers are flanged. Standard peaked covers have 1/2" peak. Special purpose peaked covers,
having a 2 to 3 pitch, provide additional slope and material thickness. The 2 to 3 pitch fitting covers are of multiple piece, welded
construction.

Steel Cover Part Numbering

Prefix

Example: 80 2 SS4 - 24 - 144

Cover Type Detail Material Tray Width Item Description

80 = Solid 2 = Flanged Stainless Steel SS4 = 304 06 = 6" For Straight Section Cover:
81 = Ventilated (all fittings) Stainless Steel 09 = 9" 144 = 12 ft. (3.66 m)
82 = Peaked 3 = Flanged Steel 12 = 12" 120 = 10 ft. (3.05 m)
(all straight sections) SS6 = 316 18 = 18" 72 = 6 ft. (1.83 m)
4 = Non-Flanged Stainless Steel Stainless Steel 24 = 24" 60 = 5 ft. (1.52 m)
(80 & 81 type only) 30 = 30"
36 = 36" For fitting covers: Insert suffix
of fitting to be covered.
See example below.

Examples of Catalog Numbers for Fitting Covers:

Horizontal Bend Cover Vertical Bend Cover

Prefix Suffix Prefix Suffix
80 2 SS4 - 18 - 90 HB 24 80 2 SS4 - 24 - 90 VO 24 - 4*
Side Rail*
Radius Height
Fitting Radius
Angle Fitting
Width Angle
Material Width
Detail Material
Cover Type Detail
Cover Type

* Required for VO fittings only

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems K-16 Eaton

Series 3 & 4 Stainless Steel - Accessories
Standard Cover Clamp
• For indoor service only. Tray Type Catalog No. Side Rail Height
in. (mm)
• Screw included.
• Sold per piece. 9SS6-9014 4 (101)
Stainless
9SS6-9015 5 (127)
Steel
9SS6-9016 6 (152)

Combination Cover and Hold Down Clamp

• Sold per piece. Tray Type Catalog No. Side Rail Height
• For indoor service only. in. (mm)
• (*) Insert SS4 or SS6 9(*)-9043 4 (101)
Stainless
Series 3 & 4 Stainless Steel

9(*)-9053 5 (127)
Steel
9(*)-9063 6 (152)

Raised Cover Clamp

• For indoor service only. Tray Type Catalog No. Tray Type
• For use with flanged covers only.
9(*)-9115-† Series 3 & 4 Steel Straight Section
† Specify gap of 1", 2", 3" or 4".
• (*) Insert SS4 or SS6 9(*)-910† All Steel Fittings (Also Series 1
Steel Straight Sections)

Heavy Duty Cover Clamp

• Recommended for outdoor service. Peaked Cover Clamp
• (‡) Insert tray width Catalog No. Side Rail Height
† Add P to Catalog No. in. mm
for peaked cover clamp. 9(*)-(‡)-9044† 4 (101)
• (*) Insert SS4 or SS6
9(*)-(‡)-9054† 5 (127)
9(*)-(‡)-9064† 6 (152)

Quantity of Standard Cover Clamps Required

Cover Joint Strip

• Used to join covers
• Plastic Catalog No.
• (‡) Insert tray width
99-9980-(‡)

Cable Cleats
(see pages O-1 thru O-5) Standard

Trefoil Single
Cable Cable
Cleats Cleats

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton K-17 B-Line series Cable Tray Systems

Series 3 & 4 Stainless Steel - Specifications

Section 1- Acceptable Manufacturers

1.01 Manufacturer: Subject to compliance with these specifications, Eaton’s B-Line series cable tray systems shall be as
manufactured by Eaton.

Section 2- Cable Tray Sections and Components

Series 3 & 4 Stainless Steel

2.02 Stainless Steel: Straight section and fitting side rails and rungs shall be made of AISI Type [304]
[316] stainless steel. Transverse members (rungs) or corrugated bottoms shall be welded to the side
rails with Type 316 stainless steel welding wire. Hardware shall be AISI Type 316 stainless steel.

2.03 Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members
(rungs) welded to the side rails. Rungs shall be spaced [6] [9] [12] inches apart. Rung spacing in
radiused fittings shall be industry standard 9" and measured at the center of the tray’s width. Each rung
must be capable of supporting a 200 lb. concentrated load at the center of the cable tray with a safety
factor of 1.5.

2.04 Ventilated Trough Cable Trays shall consist of two longitudinal members (side rails) with a corrugated
bottom welded to the side rails or rungs spaced 4" apart. The peaks of the corrugated bottom
shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers. To
provide ventilation in the tray, the valleys of the corrugated bottom shall have 21/4" x 4" rectangular
holes punched along the width of the bottom.

2.05 Non-Ventilated Bottom Trough Cable Trays shall consist of two longitudinal members (side rails) with a
corrugated bottom welded to the side rails or a solid sheet over rungs. The peaks of the corrugated
bottom shall have a minimum flat cable bearing surface of 23/4" and shall be spaced on 6" centers.

2.06 Cable tray loading depth shall be [3] [4] [5] inches per NEMA VE 1.

2.07 Straight sections shall be fabricated as I-beams. Straight sections shall be supplied in standard
[12 foot] [24 foot] [10 foot (3 m)] [20 foot (6 m)] lengths.

2.08 Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.

2.09 Splice plates shall be manufactured of high strength steel and be secured with 8 nuts and bolts per
plate. The resistance of fixed splice connections between an adjacent section of tray shall not exceed
0.00033 ohm.

2.11 All fittings must have a minimum radius of [12] [24] [36] [48] inches.

Section 3- Loading Capacities and Testing

3.01 Cable tray shall be capable of carrying a uniformly distributed load of ______ lbs./ft. on a _______ ft.
support span with a safety factor of 1.5 when supported as a simple span and tested per NEMA
VE 1 5.2. In addition to the uniformly distributed load the cable tray shall support 200 lbs.
concentrated load at mid-point of span. Load and safety factors specified are applicable to both the
side rails and rung capacities. Cable tray shall be made to manufacturing tolerances as specified
by NEMA.

3.02 Upon request, manufacturer shall provide test reports in accordance with the latest revision of
NEMA VE 1 or CSA C22.2 No. 126.

B-Line series Cable Tray Systems K-18 Eaton

Series 2, 3, 4, & 5 - Fittings
Series 2, 3, 4, & 5 Fittings

Eaton L-1 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings

Series 2, 3, 4, & 5 Fittings

How The Service Advisor Works
We know that your time is important! That’s why the color-coding system in this catalog is designed to help you
select products that fit your service needs. Products are marked to indicate the typical lead time for orders of 50
pieces or less.
Customer: How do I select my fittings so that I get the quickest turnaround?
Service Advisor: Each part of our selection chart is shown in colors. If any section of a part number is a different
color, the part will typically ship with the longer lead time represented by the colors.
Green = Fastest shipped items
Black = Normal lead-time items
Red = Normally long lead-time items
Example: 5 G - 09 - 90 HB 24 Part will have a long
lead time because of the
G material.
Changing the part number from G to A or P will change the coding to black and reduce lead time.

B-Line series Cable Tray Systems L-2 Eaton

Series 2, 3, 4, & 5 - Fittings

Fittings engineered
with 3” tangents for
splicing integrity.

Fittings Part Numbering

Prefix
Example: 4 A - 24 - 90 HB 24 (9" rung spacing is standard)
Series 2, 3, 4, & 5 Fittings

Side Rail
Height Material Width Angle Type Radius
4 = 4" (101) A = Aluminum 06 = 6" (152) 30 = 30° HB = Horizontal Bend 12 = 12" (305)
5 = 5" (127) G =HDGAF 09 = 9" (228) 45 = 45° HT = Horizontal Tee 24 = 24" (609)
6 = 6" (152) P = Pre-Galvanized 12 = 12" (305) 60 = 60° HX = Horizontal Cross 36 = 36" (914)
7 = 7" (178) SS4 = 304 Stainless Steel 18 = 18" (457) 90 = 90° VI = Vertical Inside Bend 48 = 48" (1219)
SS6 = 316 Stainless Steel 24 = 24" (609) VO = Vertical Outside Bend
30 = 30" (762) VT = Vertical Tee
36 = 36" (914) VTU = Vertical Tee, Up
HYR = Horizontal Wye, Right
HYL = Horizontal Wye, Left
CSF = Cable Support Fitting
See page APP-2 for 6” fittings with 9A-6006 and 9A-6007 splice plates.
LR = Left Reducer Fitting
RR = Right Reducer Fitting
SR = Straight Reducer Fitting

For ventilated trough, solid trough, ventilated bottom or solid bottom,

add VT, ST, 04 or SB as shown below: Available 6" thru 36"
Prefix Prefix
4AVT - 24 - 90HB24 4PST - 24 - 90HB24
Vented Trough Non-Ventilated Trough

For flat non-ventilated: Available 6" and Wider

Prefix
5PSB - 24 - 90HB24

Non-Ventilated

Note: Horizontal crosses and tees 30" or wider, with a radius of 36" or larger, will be of two-piece construction.

Green = Fastest shipped items Black = Normal lead-time items Red = Normally long lead-time items

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-3 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings

Horizontal Bend 90° 60° (HB)

1 pair splice plates with hardware included.

90˚ Horizontal Bend 60˚ Horizontal Bend

Bottoms manufactured:
C C
Ladder = 9" Rung Spacing
VT & 04 = 4" Rung Spacing
ST & SB = Flat sheet over 12" Rung Spacing
C
B B
C
R
R (76
)
3" (76) 3"

A A

Bend Tray 90˚ Horizontal Bend 60˚ Horizontal Bend

Radius Width Dimensions Dimensions
R Catalog No. A B C Catalog No. A B C
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

6 (152) (Pre)-06-90HB12 18 (457) 18 (457) 18 (457) (Pre)-06-60HB12 171/2 (445) 101/8 (257) 1111/16 (297)
9 (228) (Pre)-09-90HB12 191/2 (495) 191/2 (495) 191/2 (495) (Pre)-09-60HB12 1813/16 (478) 107/8 (276) 121/2 (318)
12 (305) (Pre)-12-90HB12 21 (533) 21 (533) 21 (533) (Pre)-12-60HB12 201/16 (510) 115/8 (295) 133/8 (340)
18 (457) (Pre)-18-90HB12 24 (610) 24 (610) 24 (610) (Pre)-18-60HB12 2211/16 (576) 131/8 (333) 151/8 (384)

Series 2, 3, 4, & 5 Fittings

12 (305)
24 (609) (Pre)-24-90HB12 27 (686) 27 (686) 27 (686) (Pre)-24-60HB12 255/16 (643) 145/8 (372) 167/8 (429)
30 (762) (Pre)-30-90HB12 30 (762) 30 (762) 30 (762) (Pre)-30-60HB12 277/8 (708) 161/8 (410) 189/16 (472)
36 (914) (Pre)-36-90HB12 33 (838) 33 (838) 33 (838) (Pre)-36-60HB12 301/2 (775) 175/8 (448) 205/16 (516)
42 (1067) (Pre)-42-90HB12 36 (914) 36 (914) 36 (914) (Pre)-42-60HB12 331/16 840 191/8 (486) 221/16 (560)
6 (152) (Pre)-06-90HB24 30 (762) 30 (762) 30 (762) (Pre)-06-60HB24 277/8 (708) 161/8 (410) 189/16 (472)
9 (228) (Pre)-09-90HB24 311/2 (800) 311/2 (800) 311/2 (800) (Pre)-09-60HB24 293/16 (741) 167/8 (429) 197/16 (494)
12 (305) (Pre)-12-90HB24 33 (838) 33 (838) 33 (838) (Pre)-12-60HB24 301/2 (775) 175/8 (448) 205/16 (516)
18 (457) (Pre)-18-90HB24 36 (914) 36 (914) 36 (914) (Pre)-18-60HB24 331/16 (708) 191/8 (486) 221/16 (560)
24 (610)
24 (609) (Pre)-24-90HB24 39 (991) 39 (991) 39 (991) (Pre)-24-60HB24 3511/16 (907) 205/8 (524) 2313/16 (605)
30 (762) (Pre)-30-90HB24 42 (1067) 42 (1067) 42 (1067) (Pre)-30-60HB24 381/4 (972) 221/8 (564) 251/2 (648)
36 (914) (Pre)-36-90HB24 45 (1143) 45 (1143) 45 (1143) (Pre)-36-60HB24 407/8 (1038) 235/8 (600) 271/4 (692)
42 (1067) (Pre)-42-90HB24 48 (1219) 48 (1219) 48 (1219) (Pre)-42-60HB24 431/2 (1105) 251/8 (638) 29 (737)
6 (152) (Pre)-06-90HB36 42 (1067) 42 (1067) (1067) (1067) (Pre)-06-60HB36 381/4 (971) 221/8 (562) 251/2 (648)
9 (228) (Pre)-09-90HB36 431/2 (1105) 431/2 (1105) 431/2 (1105) (Pre)-09-60HB36 399/16 (1005) 227/8 (581) 263/8 (670)
12 (305) (Pre)-12-90HB36 45 (1143) 45 (1143) 45 (1143) (Pre)-12-60HB36 407/8 (1038) 235/8 (600) 271/4 (692)
18 (457) (Pre)-18-90HB36 48 (1219) 48 (1219) 48 (1219) (Pre)-18-60HB36 431/2 (1105) 251/8 (638) 29 (737)
36 (914)
24 (609) (Pre)-24-90HB36 51 (1295) 51 (1295) 51 (1295) (Pre)-24-60HB36 461/16 (1170) 265/8 (676) 3011/16 (780)
30 (762) (Pre)-30-90HB36 54 (1372) 54 (1372) 54 (1372) (Pre)-30-60HB36 481/16 (1237) 281/8 (714) 327/16 (824)
36 (914) (Pre)-36-90HB36 57 (1448) 57 (1448) 57 (1448) (Pre)-36-60HB36 511/4 (1302) 295/8 (753) 343/16 (869)
42 (1067) (Pre)-42-90HB36 60 (1524) 60 (1524) 60 (1524) (Pre)-42-60HB36 537/8 (1368) 311/8 (791) 3515/16 (913)
6 (152) (Pre)-06-90HB48 54 (1372) 54 (1372) 54 (1372) (Pre)-06-60HB48 481/16 (1221) 281/8 (715) 3211/16 (830)
9 (228) (Pre)-09-90HB48 551/2 (1410) 551/2 (1410) 551/2 (1410) (Pre)-09-60HB48 4915/16 (1268) 287/8 (734) 335/16 (846)
12 (305) (Pre)-12-90HB48 57 (1448) 57 (1448) 57 (1448) (Pre)-12-60HB48 511/4 (1302) 295/8 (753) 343/16 (869)
18 (457) (Pre)-18-90HB48 60 (1524) 60 (1524) 60 (1524) (Pre)-18-60HB48 537/8 (1368) 311/8 (737) 3515/16 (913)
48 (1220)
24 (609) (Pre)-24-90HB48 63 (1600) 63 (1600) 63 (1600) (Pre)-24-60HB48 567/16 (1434) 325/8 (829) 375/8 (956)
30 (762) (Pre)-30-90HB48 66 (1676) 66 (1676) 66 (1676) (Pre)-30-60HB48 591/16 (1500) 341/8 (867) 393/8 (1000)
36 (914) (Pre)-36-90HB48 69 (1753) 69 (1753) 69 (1753) (Pre)-36-60HB48 6111/16 (1567) 355/8 (905) 411/8 (1045)
42 (1067) (Pre)-42-90HB48 72 (1829) 72 (1829) 72 (1829) (Pre)-42-60HB48 641/4 (1632) 371/8 (943) 4213/16 (1087)

(Pre) See page L-3 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems L-4 Eaton

Series 2, 3, 4, & 5 - Fittings

Horizontal Bend 45° 30° (HB)

1 pair splice plates with hardware included.
Bottoms manufactured:
Ladder = 9" Rung Spacing
45˚ Horizontal Bend 30˚ Horizontal Bend
VT & 04 = 4" Rung Spacing
ST & SB = Flat sheet over 12" Rung Spacing
C C
C
C
B B

)
R R

(76
6)
(7

3"
3"
A A

Bend Tray 45˚ Horizontal Bend 30˚ Horizontal Bend

Radius Width Dimensions Dimensions
R Catalog No. A B C Catalog No. A B C
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

6 (152) (Pre)-06-45HB12 153/4 (400) 61/2 (165) 93/16 (233) (Pre)-06-30HB12 131/8 (333) 31/2 (89) 7 (179)
9 (228) (Pre)-09-45HB12 1613/16 (427) 615/16 (176) 913/16 (249) (Pre)-09-30HB12 137/8 (352) 311/16 (94) 77/16 (189)
12 (305) (Pre)-12-45HB12 177/8 (454) 73/8 (187) 107/16 (265) (Pre)-12-30HB12 145/8 (372) 315/16 (100) 713/16 (198)
18 (457) (Pre)-18-45HB12 20 (508) 81/4 (210) 1111/16 (297) (Pre)-18-30HB12 161/8 (410) 45/16 (135) 85/8 (219)
Series 2, 3, 4, & 5 Fittings

12 (305)
24 (609) (Pre)-24-45HB12 22 1/16 (560) 91/8 (232) 1215/16 (329) (Pre)-24-30HB12 175/8 (448) 411/16 (119) 97/16 (240)
30 (762) (Pre)-30-45HB12 243/16 (614) 10 (254) 143/16 (360) (Pre)-30-30HB12 191/8 (486) 51/8 (130) 101/4 (260)
36 (914) (Pre)-36-45HB12 265/16 (668) 1015/16 (278) 157/16 (392) (Pre)-36-30HB12 205/8 (524) 51/2 (140) 111/16 (281)
42 (1067) (Pre)-42-45HB12 287/16 (722) 1113/16 300 1611/16 (424) (Pre)-42-30HB12 221/8 (562) 515/16 (151) 1113/16 (300)
6 (152) (Pre)-06-45HB24 243/16 (614) 10 (254) 143/16 (360) (Pre)-06-30HB24 191/8 (486) 51/8 (130) 101/4 (260)
9 (228) (Pre)-09-45HB24 251/4 (641) 101/2 (267) 1413/16 (376) (Pre)-09-30HB24 197/8 (505) 55/16 (135) 105/8 (270)
12 (305) (Pre)-12-45HB24 265/16 (668) 1015/16 (278) 157/16 (392) (Pre)-12-30HB24 205/8 (524) 51/2 (140) 11 1/16 (281)
18 (457) (Pre)-18-45HB24 287/16 (722) 1113/16 (300) 1611/16 (424) (Pre)-18-30HB24 221/8 (562) 515/16 (151) 1113/16 (300)
24 (610)
24 (609) (Pre)-24-45HB24 309/16 (766) 1211/16 (322) 1715/16 (456) (Pre)-24-30HB24 235/8 (600) 65/16 (160) 125/8 (321)
30 (762) (Pre)-30-45HB24 3211/16 (830) 139/16 (344) 191/8 (486) (Pre)-30-30HB24 251/8 (638) 63/4 (172) 137/16 (341)
36 (914) (Pre)-36-45HB24 3413/16 (884) 147/16 (367) 203/8 (518) (Pre)-36-30HB24 265/8 (676) 71/8 (181) 141/4 (362)
42 (1067) (Pre)-42-45HB24 3615/16 (938) 155/16 (389) 215/8 (549) (Pre)-42-30HB24 281/8 (715) 71/2 (191) 151/16 (383)
6 (152) (Pre)-06-45HB36 3211/16 (830) 139/16 (344) 191/8 (486) (Pre)-06-30HB36 251/8 (638) 63/4 (171) 137/16 (341)
9 (228) (Pre)-09-45HB36 333/4 (857) 14 (356) 193/4 (502) (Pre)-09-30HB36 257/8 (657) 615/16 (176) 137/8 (352)
12 (305) (Pre)-12-45HB36 3413/16 (884) 147/16 (367) 203/8 (518) (Pre)-12-30HB36 265/8 (676) 71/8 (181) 141/4 (362)
18 (457) (Pre)-18-45HB36 3615/16 (938) 155/16 (389) 215/8 (549) (Pre)-18-30HB36 281/8 (715) 71/2 (191) 15 1/16 (383)
36 (914)
24 (609) (Pre)-24-45HB36 39 1/16 (992) 163/16 (411) 227/8 (581) (Pre)-24-30HB36 295/8 (753) 715/16 (202) 157/8 (403)
30 (762) (Pre)-30-45HB36 413/16 (1046) 17 1/16 (433) 241/8 (613) (Pre)-30-30HB36 311/8 (790) 85/16 (211) 1611/16 (424)
36 (914) (Pre)-36-45HB36 435/16 (1100) 1715/16 (456) 253/8 (645) (Pre)-36-30HB36 325/8 (829) 83/4 (222) 171/2 (445)
42 (1067) (Pre)-42-45HB36 457/16 (1154) 1813/16 (478) 265/8 (676) (Pre)-42-30HB36 341/8 (867) 91/8 (232) 181/4 (464)
6 (152) (Pre)-06-45HB48 413/16 (1046) 17 1/16 (433) 241/8 (613) (Pre)-06-30HB48 311/8 (791) 85/16 (211) 1611/16 (424)
9 (228) (Pre)-09-45HB48 421/4 (1073) 171/2 (445) 243/4 (629) (Pre)-09-30HB48 317/8 (810) 89/16 (218) 17 1/16 (433)
12 (305) (Pre)-12-45HB48 435/16 (1100) 1715/16 (456) 253/8 (645) (Pre)-12-30HB48 325/8 (829) 83/4 (222) 171/2 (445)
18 (457) (Pre)-18-45HB48 457/16 (1154) 1813/16 (487) 265/8 (676) (Pre)-18-30HB48 341/8 (867) 91/8 (232) 181/4 (464)
48 (1220)
24 (609) (Pre)-24-45HB48 479/16 (1208) 1911/16 (500) 277/8 (708) (Pre)-24-30HB48 355/8 (905) 99/16 (243) 19 1/16 (484)
30 (762) (Pre)-30-45HB48 4911/16 (1262) 209/16 (522) 291/8 (740) (Pre)-30-30HB48 371/8 (943) 915/16 (252) 197/8 (505)
36 (914) (Pre)-36-45HB48 5113/16 (1316) 217/16 (545) 305/16 (770) (Pre)-36-30HB48 385/8 (981) 105/16 (262) 2011/16 (525)
42 (1067) (Pre)-42-45HB48 5415/16 (1395) 225/16 (567) 319/16 (802) (Pre)-42-30HB48 401/8 (1019) 103/4 (273) 211/2 (546)
(Pre) See page L-3 for catalog number prefix.
Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-5 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings
Horizontal Tee (HT) Horizontal Cross (HX)
2 pair splice plates with hardware included. 3 pair splice plates with hardware included.

W
W

3" (76)

3" (76)
A A
R

R
Bend Tray Horizontal Tee Horizontal Cross
Radius Width Dimensions Dimensions
R Catalog Number A B Catalog Number A B
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

6 (152) (Prefix)-06-HT12 18 (457) 36 (914) (Prefix)-06-HX12 18 (457) 36 (914)

9 (229) (Prefix)-09-HT12 191/2 (496) 39 (991) (Prefix)-09-HX12 191/2 (496) 39 (991)
12 (305) (Prefix)-12-HT12 21 (533) 42 (1067) (Prefix)-12-HX12 21 (533) 42 (1067)

Series 2, 3, 4, & 5 Fittings

18 (457) (Prefix)-18-HT12 24 (609) 48 (1219) (Prefix)-18-HX12 24 (609) 48 (1219)
12 (305)
24 (609) (Prefix)-24-HT12 27 (686) 54 (1372) (Prefix)-24-HX12 27 (686) 54 (1372)
30 (762) (Prefix)-30-HT12 30 (762) 60 (1524) (Prefix)-30-HX12 30 (762) 60 (1524)
36 (914) (Prefix)-36-HT12 33 (838) 66 (1676) (Prefix)-36-HX12 33 (838) 66 (1676)
42 (1067) (Prefix)-42-HT12 36 914 72 (1829) (Prefix)-42-HX12 36 914 72 (1829)
6 (152) (Prefix)-06-HT24 30 (762) 60 (1524) (Prefix)-06-HX24 30 (762) 60 (1524)
9 (229) (Prefix)-09-HT24 311/2 (800) 63 (1600) (Prefix)-09-HX24 311/2 (800) 63 (1600)
12 (305) (Prefix)-12-HT24 33 (838) 66 (1676) (Prefix)-12-HX24 33 (838) 66 (1676)
18 (457) (Prefix)-18-HT24 36 (914) 72 (1829) (Prefix)-18-HX24 36 (914) 72 (1829)
24 (610)
24 (609) (Prefix)-24-HT24 39 (991) 78 (1982) (Prefix)-24-HX24 39 (991) 78 (1982)
30 (762) (Prefix)-30-HT24 42 (1067) 84 (2134) (Prefix)-30-HX24 42 (1067) 84 (2134)
36 (914) (Prefix)-36-HT24 45 (1143) 90 (2286) (Prefix)-36-HX24 45 (1143) 90 (2286)
42 (1067) (Prefix)-42-HT24 48 (1219) 96 (2438) (Prefix)-42-HX24 48 (1219) 96 (2438)
6 (152) (Prefix)-06-HT36 42 (1067) 84 (2134) (Prefix)-06-HX36 42 (1067) 84 (2134)
9 (229) (Prefix)-09-HT36 431/2 (1105) 87 (2210) (Prefix)-09-HX36 431/2 (1105) 87 (2210)
12 (305) (Prefix)-12-HT36 45 (1143) 90 (2286) (Prefix)-12-HX36 45 (1143) 90 (2286)
18 (457) (Prefix)-18-HT36 48 (1219) 96 (2438) (Prefix)-18-HX36 48 (1219) 96 (2438)
36 (914)
24 (609) (Prefix)-24-HT36 51 (1295) 102 (2590) (Prefix)-24-HX36 51 (1295) 102 (2590)
30 (762) (Prefix)-30-HT36 54 (1372) 108 (2744) (Prefix)-30-HX36 54 (1372) 108 (2744)
36 (914) (Prefix)-36-HT36 57 (1448) 114 (2896) (Prefix)-36-HX36 57 (1448) 114 (2896)
42 (1067) (Prefix)-42-HT36 60 (1524) 120 (3048) (Prefix)-42-HX36 60 (1524) 120 (3048)
6 (152) (Prefix)-06-HT48 54 (1372) 108 (2744) (Prefix)-06-HX48 54 (1372) 108 (2744)
9 (229) (Prefix)-09-HT48 551/2 (1410) 111 (2820) (Prefix)-09-HX48 551/2 (1410) 111 (2820)
12 (305) (Prefix)-12-HT48 57 (1448) 114 (2896) (Prefix)-12-HX48 57 (1448) 114 (2896)
18 (457) (Prefix)-18-HT48 60 (1524) 120 (3048) (Prefix)-18-HX48 60 (1524) 120 (3048)
48 (1220)
24 (609) (Prefix)-24-HT48 63 (1600) 126 (3200) (Prefix)-24-HX48 63 (1600) 126 (3200)
30 (762) (Prefix)-30-HT48 66 (1676) 132 (3353) (Prefix)-30-HX48 66 (1676) 132 (3353)
36 (914) (Prefix)-36-HT48 69 (1753) 138 (3535) (Prefix)-36-HX48 69 (1753) 138 (3535)
42 (1067) (Prefix)-42-HT48 72 (1829) 144 (3658) (Prefix)-42-HX48 72 (1829) 144 (3658)

(Prefix) See page L-3 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems L-6 Eaton

Series 2, 3, 4, & 5 - Fittings

Reducers (LR, SR, RR)

1 pair splice plates with hardware
included.

Reducer Part Numbering

Prefix - 24 - RR - 18
Width2 Left Reducer - LR Straight Reducer SR Right Reducer -RR
Fitting
Width1 W2 W2 W2

Prefix

A A
A

W1 W1 W1

Tray Width Left Hand Reducer Straight Reducer Right Hand Reducer
W1 W2 Catalog No. A Catalog No. A Catalog No. A
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm)

9 (228) 6 (152) (Prefix)-09-LR06 93/4 (248) (Prefix)-09-SR06 815/16 (227) (Prefix)-09-RR06 93/4 (248)
6 (Prefix)-12-LR06 111/2 (Prefix)-12-SR06 93/4 (Prefix)-12-RR06 111/2
Series 2, 3, 4, & 5 Fittings

(152) (292) (248) (292)

12 305
9 (228) (Prefix)-12-LR09 93/4 (248) (Prefix)-12-SR09 815/16 (227) (Prefix)-12-RR09 93/4 (248)
6 (152) (Prefix)-18-LR06 1415/16 (379) (Prefix)-18-SR06 111/2 (292) (Prefix)-18-RR06 1415/16 (379)
18 (457) 9 (228) (Prefix)-18-LR09 133/16 (340) (Prefix)-18-SR09 105/8 (270) (Prefix)-18-RR09 133/16 (340)
12 (305) (Prefix)-18-LR12 111/2 (292) (Prefix)-18-SR12 93/4 (248) (Prefix)-18-RR12 111/2 (292)
6 (152) (Prefix)-24-LR06 183/8 (467) (Prefix)-24-SR06 131/4 (336) (Prefix)-24-RR06 183/8 (467)
9 (228) (Prefix)-24-LR09 1611/16 (424) (Prefix)-24-SR09 123/8 (314) (Prefix)-24-RR09 1611/16 (424)
24 609
12 (305) (Prefix)-24-LR12 1415/16 (379) (Prefix)-24-SR12 111/2 (292) (Prefix)-24-RR12 1415/16 (379)
18 (457) (Prefix)-24-LR18 111/2 (292) (Prefix)-24-SR18 93/4 (248) (Prefix)-24-RR18 111/2 (292)
6 (152) (Prefix)-30-LR06 217/8 (555) (Prefix)-30-SR06 1415/16 (379) (Prefix)-30-RR06 217/8 (555)
9 (228) (Prefix)-30-LR09 201/8 (511) (Prefix)-30-SR09 141/8 (359) (Prefix)-30-RR09 201/8 (511)
30 (762) 12 (305) (Prefix)-30-LR12 183/8 (467) (Prefix)-30-SR12 131/4 (336) (Prefix)-30-RR12 183/8 (467)
18 (457) (Prefix)-30-LR18 1415/16 (379) (Prefix)-30-SR18 111/2 (292) (Prefix)-30-RR18 1415/16 (379)
24 (609) (Prefix)-30-LR24 111/2 (292) (Prefix)-30-SR24 93/4 (248) (Prefix)-30-RR24 111/2 (292)
6 (152) (Prefix)-36-LR06 255/16 (643) (Prefix)-36-SR06 1611/16 (424) (Prefix)-36-RR06 255/16 (643)
9 (228) (Prefix)-36-LR09 239/16 (598) (Prefix)-36-SR09 1513/16 (402) (Prefix)-36-RR09 239/16 (598)
12 (305) (Prefix)-36-LR12 217/8 (555) (Prefix)-36-SR12 1415/16 (379) (Prefix)-36-RR12 217/8 (555)
36 (914)
18 (457) (Prefix)-36-LR18 183/8 (467) (Prefix)-36-SR18 131/4 (336) (Prefix)-36-RR18 183/8 (467)
24 (609) (Prefix)-36-LR24 1415/16 (379) (Prefix)-36-SR24 111/2 (292) (Prefix)-36-RR24 1415/16 (379)
30 (762) (Prefix)-36-LR30 111/2 (292) (Prefix)-36-SR30 93/4 (248) (Prefix)-36-RR30 111/2 (292)
6 (152) (Prefix)-42-LR06 283/4 (730) (Prefix)-42-SR06 183/8 (467) (Prefix)-42-RR06 283/4 (730)
9 (228) (Prefix)-42-LR09 271/16 (687) (Prefix)-42-SR09 179/16 (446) (Prefix)-42-RR09 271/16 (687)
12 (305) (Prefix)-42-LR12 255/16 (643) (Prefix)-42-SR12 1611/16 (424) (Prefix)-42-RR12 255/16 (643)
42 (1067) 18 (457) (Prefix)-42-LR18 217/8 (555) (Prefix)-42-SR18 1415/16 (379) (Prefix)-42-RR18 217/8 (555)
24 (609) (Prefix)-42-LR24 183/8 (467) (Prefix)-42-SR24 131/4 (336) (Prefix)-42-RR24 183/8 (467)
30 (762) (Prefix)-42-LR30 1415/16 (379) (Prefix)-42-SR30 111/2 (292) (Prefix)-42-RR30 1415/16 (379)
36 (914) (Prefix)-42-LR36 111/2 (292) (Prefix)-42-SR36 93/4 (248) (Prefix)-42-RR36 111/2 (292)

(Prefix) See page L-3 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-7 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings

Horizontal Reducing Tee (HT)

2 pair splice plates with hardware included.

3" (76)
A

R
R = Radius W2
Prefix - 36 - 18 HT 24

Radius
Fitting
Width W2
Width W1
To complete catalog number, insert
fitting prefix.

Tray Width * Insert Radius 12" Radius 24" Radius 36" Radius 48" Radius
(12", 24", 36", or 48")
W1 W2 Catalog No. A B A B A B A B

Series 2, 3, 4, & 5 Fittings

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

9 (228) 6 (152) (Prefix)-09-06-HT* 191/2 (496) 36 (914) 311/2 (800) 60 (1524) 43 (1092) 84 (2134) 551/2 (1410) 108 (2743)
12 (305) 6 (152) (Prefix)-12-06-HT* 21 (533) 36 (914) 33 (838) 60 (1524) 45 (1143) 84 (2134) 57 (1448) 108 (2743)
9 (228) (Prefix)-12-09-HT* 21 (533) 39 (991) 33 (838) 63 (1600) 45 (1143) 87 (2210) 57 (1448) 111 (2819)
6 (152) (Prefix)-18-06-HT* 24 (609) 36 (914) 36 (914) 60 (1524) 48 ((1143)) 84 (2134) 60 (1524) 108 (2743)
18 (457) 9 (228) (Prefix)-18-09-HT* 24 (609) 39 (991) 36 (914) 63 (1600) 48 (1219) 87 (2210) 60 (1524) 111 (2819)
12 (305) (Prefix)-18-12-HT* 24 (609) 42 (1067) 36 (914) 66 (1676) 48 (1219) 90 (2286) 60 (1524) 114 (2895)
6 (152) (Prefix)-24-06-HT* 27 (686) 36 (914) 39 (991) 60 (1524) 51 (1295) 84 (2134) 63 (1600) 108 (2743)
24 (609) 9 (228) (Prefix)-24-09-HT* 27 (686) 39 (991) 39 (991) 63 (1600) 51 (1295) 87 (2210) 63 (1600) 111 (2819)
12 (305) (Prefix)-24-12-HT* 27 (686) 42 (1067) 39 (991) 66 (1676) 51 (1295) 90 (2286) 63 (1600) 114 (2895)
18 (457) (Prefix)-24-18-HT* 27 (686) 48 (1219) 39 (991) 72 (1829) 51 (1295) 96 (2438) 63 (1600) 120 (3048)
6 (152) (Prefix)-30-06-HT* 30 (762) 36 (914) 42 (1067) 60 (1524) 54 (1372) 84 (2134) 66 (1676) 108 (2743)
9 (228) (Prefix)-30-09-HT* 30 (762) 39 (991) 42 (1067) 63 (1600) 54 (1372) 87 (2210) 66 (1676) 111 (2819)
30 (762) 12 (305) (Prefix)-30-12-HT* 30 (762) 42 (1067) 42 (1067) 66 (1676) 54 (1372) 90 (2286) 66 (1676) 114 (2895)
18 (457) (Prefix)-30-18-HT* 30 (762) 48 (1219) 42 (1067) 72 (1829) 54 (1372) 96 (2438) 66 (1676) 120 (3048)
24 (609) (Prefix)-30-24-HT* 30 (762) 54 (1372) 42 (1067) 78 (1981) 54 (1372) 102 (2591) 66 (1676) 126 (3200)
6 (152) (Prefix)-30-06-HT* 33 (838) 36 (914) 45 (1143) 60 (1524) 57 (1448) 84 (2134) 69 (1753) 108 (2743)
9 (228) (Prefix)-36-09-HT* 33 (838) 39 (991) 45 (1143) 63 (1600) 57 (1448) 87 (2210) 69 (1753) 111 (2819)
36 (914) 12 (305) (Prefix)-36-12-HT* 33 (838) 42 (1067) 45 (1143) 66 (1676) 57 (1448) 90 (2286) 69 (1753) 114 (2895)
18 (457) (Prefix)-36-18-HT* 33 (838) 48 (1219) 45 (1143) 72 (1829) 57 (1448) 96 (2438) 69 (1753) 120 (3048)
24 (609) (Prefix)-36-24-HT* 33 (838) 54 (1372) 45 (1143) 78 (1981) 57 (1448) 102 (2591) 69 (1753) 126 (3200)
30 (762) (Prefix)-36-30-HT* 33 (838) 60 (1524) 45 (1143) 84 (2134) 57 (1448) 108 (2743) 69 (1753) 132 (3353)
6 (152) (Prefix)-42-06-HT* 36 (914) 36 (914) 48 (1219) 60 (1524) 60 (1524) 84 (2134) 72 (1829) 108 (2743)
9 (228) (Prefix)-42-09-HT* 36 (914) 39 (991) 48 (1219) 63 (1600) 60 (1524) 87 (2210) 72 (1829) 111 (2819)
12 (305) (Prefix)-42-12-HT* 36 (914) 42 (1067) 48 (1219) 66 (1676) 60 (1524) 90 (2286) 72 (1829) 114 (2895)
42 (1067) 18 (457) (Prefix)-42-18-HT* 36 (914) 48 (1219) 48 (1219) 72 (1829) 60 (1524) 96 (2438) 72 (1829) 120 (3048)
24 (609) (Prefix)-42-24-HT* 36 (914) 54 (1372) 48 (1219) 78 (1981) 60 (1524) 102 (2591) 72 (1829) 126 (3200)
30 (762) (Prefix)-42-30-HT* 36 (914) 60 (1524) 48 (1219) 84 (2134) 60 (1524) 108 (2743) 72 (1829) 132 (3353)
36 (914) (Prefix)-42-36-HT* 36 (914) 66 (1676) 48 (1219) 90 (2286) 60 (1524) 114 (2895) 72 (1829) 138 (3505)

(Prefix) See page L-3 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems L-8 Eaton

Series 2, 3, 4, & 5 - Fittings

Horizontal Expanding Tee (HT)

2 pair splice plates with hardware included.

3" (76)
A R

R = Radius W2 Prefix - 09 - 30 HT 12

Radius
Fitting
Width W2
Width W1
To complete catalog number, insert
fitting prefix.

Tray Width * Insert Radius 12" Radius 24" Radius 36" Radius 48" Radius
(12", 24", 36", or 48")
W1 W2 Catalog No. A B A B A B A B
Series 2, 3, 4, & 5 Fittings

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
9 228 (Prefix)-06-09-HT* 18 (457) 39 (991) 30 (762) 63 (1600) 42 (1067) 87 (2210) 54 (1372) 111 2819
12 (305) (Prefix)-06-12-HT* 18 (457) 42 (1067) 30 (762) 66 (1676) 42 (1067) 90 (2286) 54 (1372) 114 (2895)
18 (457) (Prefix)-06-18-HT* 18 457) 48 (1219) 30 (762) 72 (1829) 42 (1067) 96 (2438) 54 (1372) 120 (3048)
6 (152) 24 (609) (Prefix)-06-24-HT* 18 (457) 54 (1372) 30 (762) 78 (1981) 42 (1067) 102 (2591) 54 (1372) 126 (3200)
30 (762) (Prefix)-06-30-HT* 18 (457) 60 (1524) 30 (762) 84 (2134) 42 (1067) 108 (2743) 54 (1372) 132 (3353)
36 (914) (Prefix)-06-36-HT* 18 (457) 66 (1676) 30 (762) 90 (2286) 42 (1067) 114 (2895) 54 (1372) 138 (3503)
42 (1067) (Prefix)-06-42-HT* 18 (457) 72 (1829) 30 (762) 96 (2438) 42 (1067) 120 (3048) 54 (1372) 144 (3658)
12 (305) (Prefix)-09-12-HT* 191/2 (496) 42 (1067) 311/2 (800) 66 (1676) 431/2 (1105) 90 (2286) 551/2 (1410) 114 (2895)
18 (457) (Prefix)-09-18-HT* 191/2 (496) 48 (1219) 311/2 (800) 72 (1829) 431/2 (1105) 96 (2438) 551/2 (1410) 120 (3048)
9 (228) 24 (609) (Prefix)-09-24-HT* 191/2 (496) 54 (1372) 311/2 (800) 78 (1981) 431/2 (1105) 102 (2591) 551/2 (1410) 126 (3200)
30 (762) (Prefix)-09-30-HT* 191/2 (496) 60 (1524) 311/2 (800) 84 (2134) 431/2 (1105) 108 (2743) 551/2 (1410) 132 (3353)
36 (914) (Prefix)-09-36-HT* 191/2 (496) 66 (1676) 311/2 (800) 90 (2286) 431/2 (1105) 114 (2895) 551/2 (1410) 138 (3503)
42 (1067) (Prefix)-09-42-HT* 191/2 (496) 72 (1829) 311/2 (800) 96 (2438) 431/2 (1105) 120 (3048) 551/2 (1410) 144 (3658)
18 (457) (Prefix)-12-18-HT* 21 (533) 48 (1219) 33 (838) 72 (1829) 45 (1143) 96 (2438) 57 (1448) 120 (3048)
24 (609) (Prefix)-12-24-HT* 21 (533) 54 (1372) 33 (838) 78 (1981) 45 (1143) 102 (2591) 57 (1448) 126 (3200)
12 (305) 30 (762) (Prefix)-12-30-HT* 21 (533) 60 (1524) 33 (838) 84 (2134) 45 (1143) 108 (2743) 57 (1448) 132 (3353)
36 (914) (Prefix)-12-36-HT* 21 (533) 66 (1676) 33 (838) 90 (2286) 45 (1143) 114 (2895) 57 (1448) 138 (3503)
42 (1067) (Prefix)-12-42-HT* 21 (533) 72 (1829) 33 (838) 96 (2438) 45 (1143) 120 (3048) 57 (1448) 144 (3658)
24 (609) (Prefix)-18-24-HT* 24 (609) 54 (1372) 36 (914) 78 (1981) 48 (1219) 102 (2591) 60 (1524) 126 (3200)
18 (457) 30 (762) (Prefix)-18-30-HT* 24 (609) 60 (1524) 36 (914) 84 (2134) 48 (1219) 108 (2743) 60 (1524) 132 (3353)
36 (914) (Prefix)-18-36-HT* 24 (609) 66 (1676) 36 (914) 90 (2286) 48 (1219) 114 (2895) 60 (1524) 138 (3503)
42 (1067) (Prefix)-18-42-HT* 24 (609) 72 (1829) 36 (914) 96 (2438) 48 (1219) 120 (3048) 60 (1524) 144 (3658)
30 (762) (Prefix)-24-30-HT* 27 (686) 60 (1524) 39 (991) 84 (2134) 51 (1295) 108 (2743) 63 (1600) 132 (3353)
24 (609) 36 (914) (Prefix)-24-36-HT* 27 (686) 66 (1676) 39 (991) 90 (2286) 51 (1295) 114 (2895) 63 (1600) 138 (3503)
42 (1067) (Prefix)-24-42-HT* 27 (686) 72 (1829) 39 (991) 96 (2438) 51 (1295) 120 (3048) 63 (1600) 144 (3658)

30 (762) 36 (914) (Prefix)-30-36-HT* 30 (762) 66 (1676) 42 (1067) 90 (2286) 54 (1372) 114 (2895) 66 (1676) 138 (3503)
42 (1067) (Prefix)-30-42-HT* 30 (762) 72 (1829) 42 (1067) 96 (2438) 54 (1372) 120 (3048) 66 (1676) 144 (3658)
36 (914) 42 (1067) (Prefix)-36-42-HT* 33 (838) 72 (1829) 45 (1143) 96 (2438) 57 (1448) 120 (3048) 69 (1753) 144 (3658)

(Prefix) See page L-3 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total out-
side width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-9 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings

Horizontal Expanding/Reducing Cross (HX)

3 pair splice plates with hardware included.

B W2

3" (76)
R
Prefix - 36 - 18 HX 24
W1
Radius
Fitting
Width W2
Width W1
To complete catalog number, insert
fitting prefix.

Tray Width * Insert Radius 12" Radius 24" Radius 36" Radius 48" Radius
(12", 24", 36", or 48")
W1 W2 Catalog No. A B A B A B A B

Series 2, 3, 4, & 5 Fittings

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

9 (228) 6 (152) (Prefix)-09-06-HX* 39 (991) 36 (914) 63 1600 60 (1524) 87 (2210) 84 (2134) 111 2819 108 (2743)

12 (305) 6 (152) (Prefix)-12-06-HX* 42 (1067) 36 (914) 66 (1676) 60 (1524) 90 (2286) 84 (2134) 114 (2895) 108 (2743)
9 (228) (Prefix)-12-09-HX* 42 (1067) 39 (991) 66 (1676) 63 (1600) 90 (2286) 87 (2210) 114 (2895) 111 (2819)
6 (152) (Prefix)-18-06-HX* 48 (1219) 36 (914) 72 (1829) 60 (1524) 96 (2438) 84 (2134) 120 (3048) 108 (2743)
18 (457) 9 (228) (Prefix)-18-09-HX* 48 (1219) 39 (991) 72 (1829) 63 (1600) 96 (2438) 87 (2210) 120 (3048) 111 (2819)
12 (305) (Prefix)-18-12-HX* 48 (1219) 42 (1067) 72 (1829) 66 (1676) 96 (2438) 90 (2286) 120 (3048) 114 (2895)
6 (152) (Prefix)-24-06-HX* 54 (1372) 36 (914) 78 (1981) 60 (1524) 102 (2591) 84 (2134) 126 (3200) 108 (2743)
24 (609) 9 (228) (Prefix)-24-09-HX* 54 (1372) 39 (991) 78 (1981) 63 (1600) 102 (2591) 87 (2210) 126 (3200) 111 (2819)
12 (305) (Prefix)-24-12-HX* 54 (1372) 42 (1067) 78 (1981) 66 (1676) 102 (2591) 90 (2286) 126 (3200) 114 (2895)
18 (457) (Prefix)-24-18-HX* 54 (1372) 48 (1219) 78 (1981) 72 (1829) 102 (2591) 96 (2438) 126 (3200) 120 (3048)
6 (152) (Prefix)-30-06-HX* 60 (1524) 36 (914) 84 (2134) 60 (1524) 108 (2743) 84 (2134) 132 (3353) 108 (2743)
9 (228) (Prefix)-30-09-HX* 60 (1524) 39 (991) 84 (2134) 63 (1600) 108 (2743) 87 (2210) 132 (3353) 111 (2819)
30 (762) 12 (305) (Prefix)-30-12-HX* 60 (1524) 42 (1067) 84 (2134) 66 (1676) 108 (2743) 90 (2286) 132 (3353) 114 (2895)
18 (457) (Prefix)-30-18-HX* 60 (1524) 48 (1219) 84 (2134) 72 (1829) 108 (2743) 96 (2438) 132 (3353) 120 (3048)
24 (609) (Prefix)-30-24-HX* 60 (1524) 54 (1372) 84 (2134) 78 (1981) 108 (2743) 102 (2591) 132 (3353) 126 (3200)
6 (152) (Prefix)-30-06-HX* 66 (1676) 36 (914) 90 (2286) 60 (1524) 114 (2895) 84 (2134) 138 (3505) 108 (2743)
9 (228) (Prefix)-36-09-HX* 66 (1676) 39 (991) 90 (2286) 63 (1600) 114 (2895) 87 (2210) 138 (3505) 111 (2819)
36 (914) 12 (305) (Prefix)-36-12-HX* 66 (1676) 42 (1067) 90 (2286) 66 (1676) 114 (2895) 90 (2286) 138 (3505) 114 (2895)
18 (457) (Prefix)-36-18-HX* 66 (1676) 48 (1219) 90 (2286) 72 (1829) 114 (2895) 96 (2438) 138 (3505) 120 (3048)
24 (609) (Prefix)-36-24-HX* 66 (1676) 54 (1372) 90 (2286) 78 (1981) 114 (2895) 102 (2591) 138 (3505) 126 (3200)
30 (762) (Prefix)-36-30-HX* 66 (1676) 60 (1524) 90 (2286) 84 (2134) 114 (2895) 108 (2743) 138 (3505) 132 (3353)
6 (152) (Prefix)-42-06-HX* 72 (1829) 36 (914) 96 (2438) 60 (1524) 120 (3048) 84 (2134) 144 (3658) 108 (2743)
9 (228) (Prefix)-42-09-HX* 72 (1829) 39 (991) 96 (2438) 63 (1600) 120 (3048) 87 (2210) 144 (3658) 111 (2819)
12 (305) (Prefix)-42-12-HX* 72 (1829) 42 (1067) 96 (2438) 66 (1676) 120 (3048) 90 (2286) 144 (3658) 114 (2895)
42 (1067) 18 (457) (Prefix)-42-18-HX* 72 (1829) 48 (1219) 96 (2438) 72 (1829) 120 (3048) 96 (2438) 144 (3658) 120 (3048)
24 (609) (Prefix)-42-24-HX* 72 (1829) 54 (1372) 96 (2438) 78 (1981) 120 (3048) 102 (2591) 144 (3658) 126 (3200)
30 (762) (Prefix)-42-30-HX* 72 (1829) 60 (1524) 96 (2438) 84 (2134) 120 (3048) 108 (2743) 144 (3658) 132 (3353)
36 (914) (Prefix)-42-36-HX* 72 (1829) 66 (1676) 96 (2438) 90 (2286) 120 (3048) 114 (2895) 144 (3658) 138 (3505)
(Prefix) See page L-3 for catalog number prefix.
Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems L-10 Eaton

Series 2, 3, 4, & 5 - Fittings

Horizontal Wye (HYL, HYR)

2 pair splice plates with hardware included.

Left Hand Wye - HYL Right Hand Wye - HYR

B B
Series 2, 3, 4, & 5 Fittings

C A A C

R R

45˚ 45˚
W W

R = Radius

Bend Tray Left Hand Wye Right Hand Wye

Radius Width Catalog No. Catalog No. A B C
in. mm in. mm in. mm in. mm in. mm

6 (152) (Prefix)-06-HYL (Prefix)-06-HYR 287/16 (722) 153/16 (386) 31/16 (77)

9 (228) (Prefix)-09-HYL (Prefix)-09-HYR 3211/16 (831) 205/16 (516) 61/16 (154)
12 (305) (Prefix)-12-HYL (Prefix)-12-HYR 3615/16 (938) 257/16 (646) 91/16 (231)
18 (457) (Prefix)-18-HYL (Prefix)-18-HYR 453/8 (1153) 3513/16 (910) 151/16 (383)
24 (609)
24 (609) (Prefix)-24-HYL (Prefix)-24-HYR 537/8 (1368) 4515/16 (1167) 211/16 (535)
30 (762) (Prefix)-30-HYL (Prefix)-30-HYR 623/8 (1585) 563/16 (1427) 271/16 (688)
36 (914) (Prefix)-36-HYL (Prefix)-36-HYR 707/8 (1800) 667/16 (1687) 331/16 (840)
42 (1067) (Prefix)-42-HYL (Prefix)-42-HYR 793/8 (2016) 765/8 (1946) 391/16 (992)

(Prefix) See page L-3 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-11 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings

Vertical Bend 90˚ (VO, VI)

1 pair splice plates with hardware included.

90˚ Vertical Outside - VO 90˚ Vertical Inside - VI

C A
3" (76)

C R
B B

3" (76)
R C

A C

Bend Tray (*) Insert "VO" for VO Side Rail VI Side Rail Height
Radius Width Vert. Outside Bend Height
R Insert "VI" for 4" - 7" 4" 5" 6" 7"
Vert. Inside Bend in./(mm) in./(mm) in./(mm) in./(mm) in./(mm)
in./(mm) in. (mm) Catalog No. A B C A B C A B C A B C A B C
6 (152) (Prefix)-06-90(*)12

Series 2, 3, 4, & 5 Fittings

9 (228) (Prefix)-09-90(*)12
12 (305) (Prefix)-12-90(*)12
12 18 (457) (Prefix)-18-90(*)12 15 15 15 19 19 19 20 20 20 21 21 21 22 22 22
(305) 24 (609) (Prefix)-24-90(*)12 (381) (381) (381) (483) (483) (483) (508) (508) (508) (533) (533) (533) (559) (559) (559)
30 (762) (Prefix)-30-90(*)12
36 (914) (Prefix)-36-90(*)12
42 (1067) (Prefix)-42-90(*)12
6 (152) (Prefix)-06-90(*)24
9 (228) (Prefix)-09-90(*)24
12 (305) (Prefix)-12-90(*)24
24 18 (457) (Prefix)-18-90(*)24 27 27 27 31 31 31 32 32 32 33 33 33 34 34 34
(609) 24 (609) (Prefix)-24-90(*)24 (686) (686) (686) (787) (787) (787) (813) (813) (813) (838) (838) (838) (864) (864) (864)
30 (762 (Prefix)-30-90(*)24
36 (914) (Prefix)-36-90(*)24
42 (1067) (Prefix)-42-90(*)24
6 (152) (Prefix)-06-90(*)36
9 (228) (Prefix)-09-90(*)36
12 (305) (Prefix)-12-90(*)36
36 18 (457) (Prefix)-18-90(*)36 39 39 39 43 43 43 44 44 44 45 45 45 46 46 46
(914) 24 (609) (Prefix)-24-90(*)36 (991) (991) (991) (1092) (1092) (1092) (1118) (1118) (1118) (1143) (1143) (1143) (1168) (1168) (1168)
30 (762 (Prefix)-30-90(*)36
36 (914) (Prefix)-36-90(*)36
42 (1067) (Prefix)-42-90(*)36
6 (152) (Prefix)-06-90(*)48
9 (228) (Prefix)-09-90(*)48
12 (305) (Prefix)-12-90(*)48
48 18 (457) (Prefix)-18-90(*)48 51 51 51 55 55 55 56 56 56 57 57 57 58 58 58
(1219) 24 (609) (Prefix)-24-90(*)48 (1295) (1295) (1295) (1397) (1397) (1397) (1422) (1422) (1422) (1448) (1448) (1448) (1473) (1473) (1473)
30 (762 (Prefix)-30-90(*)48
36 (914) (Prefix)-36-90(*)48
42 (1067) (Prefix)-42-90(*)48
(Prefix) See page L-3 for catalog number prefix.
Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems L-12 Eaton

Series 2, 3, 4, & 5 - Fittings

Vertical Bend 60˚ (VO, VI)

1 pair splice plates with hardware included.

60˚ Vertical Outside - VO 60˚ Vertical Inside - VI

C A

3" (76)

3" (76)
R B R
B
C

A C

9 (228) (Prefix)-09-60(*)12
12 (305) (Prefix)-12-60(*)12
12 18 (457) (Prefix)-18-60(*)12 147/8 85/8 915/16 183/8 107/8 121/4 191/4 111/8 1213/16 201/16 115/8 133/8 2115/16 121/8 14
(305) 24 (609) (Prefix)-24-60(*)12 (378) (219) (253) (467) (270) (311) (489 (283) (326) (510) (296) (340) (557) (308) (356)
30 (762) (Prefix)-30-60(*)12
36 (914) (Prefix)-36-60(*)12
42 (1067) (Prefix)-42-60(*)12
6 (152) (Prefix)-06-60(*)24
9 (228) (Prefix)-09-60(*)24
12 (305) (Prefix)-12-60(*)24
24 18 (457) (Prefix)-18-60(*)24 255/16 145/8 167/8 283/4 165/8 193/16 295/8 171/8 193/4 301/2 175/8 205/16 313/8 181/8 207/8
(609) 24 (609) (Prefix)-24-60(*)24 (643) (372) (428) (730) (422) (488) (753) (435) (502) (775) (448) (516) (797) (461) (530)
30 (762 (Prefix)-30-60(*)24
36 (914) (Prefix)-36-60(*)24
42 (1067) (Prefix)-42-60(*)24
6 (152) (Prefix)-06-60(*)36
9 (228) (Prefix)-09-60(*)36
12 (305) (Prefix)-12-60(*)36
36 18 (457) (Prefix)-18-60(*)36 3511/16 205/8 2313/16 391/8 225/8 261/8 40 231/8 2611/16 407/8 235/8 271/4 413/4 241/8 2713/16
(914) 24 (609) (Prefix)-24-60(*)36 (907) (524) (605) (994) (575) (663) (1016) (587) (687) (1038) (600) (692) (1060) (613) (706)
30 (762 (Prefix)-30-60(*)36
36 (914) (Prefix)-36-60(*)36
42 (1067) (Prefix)-42-60(*)36
6 (152) (Prefix)-06-60(*)48
9 (228) (Prefix)-09-60(*)48
12 (305) (Prefix)-12-60(*)48
48 18 (457) (Prefix)-18-60(*)48 461/16 265/8 3011/16 499/16 285/8 33 503/8 291/8 335/8 511/4 295/8 343/16 521/8 301/8 343/4
(1219) 24 (609) (Prefix)-24-60(*)48 (1170) (676) (780) (1259) (727) (838) (1280) (740) (854) (1302) (753) (868) (1324) (765) (883)
30 (762 (Prefix)-30-60(*)48
36 (914) (Prefix)-36-60(*)48
42 (1067) (Prefix)-42-60(*)48
(Prefix) See page L-3 for catalog number prefix.
Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-13 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings

Vertical Bend 45˚ (VO, VI)

1 pair splice plates with hardware included.

45˚ Vertical Outside -VO 45˚ Vertical Inside -VI

3" (76)
R
C
3" (76)

B
B
R C
C
A A

Series 2, 3, 4, & 5 Fittings

9 (228) (Prefix)-09-45(*)12
12 (305) (Prefix)-12-45(*)12
12 18 (457) (Prefix)-18-45(*)12 135/8 55/8 8 167/16 613/16 95/8 171/8 71/8 101/16 177/8 73/8 107/16 189/16 711/16 107/8
(305) 24 (609) (Prefix)-24-45(*)12 (346) (143) (203) (417) (173) (245) (435) (181) (256) (454) (188) (265) (471) (195) (2176)
30 (762) (Prefix)-30-45(*)12
36 (914) (Prefix)-36-45(*)12
42 (1067) (Prefix)-42-45(*)12
6 (152) (Prefix)-06-45(*)24
9 (228) (Prefix)-09-45(*)24
12 (305) (Prefix)-12-45(*)24
24 18 (457) (Prefix)-18-45(*)24 221/16 91/8 1215/16 2415/16 105/16 145/8 255/8 105/8 15 265/16 1015/16 157/16 271/16 113/16 1513/16
(609) 24 (609) (Prefix)-24-45(*)24 (561) (232) (329) (634) (262) (372) (651) (270) (381) (668) (278) (392) (687) (284) (402)
30 (762 (Prefix)-30-45(*)24
36 (914) (Prefix)-36-45(*)24
42 (1067) (Prefix)-42-45(*)24
6 (152) (Prefix)-06-45(*)36
9 (228) (Prefix)-09-45(*)36
12 (305) (Prefix)-12-45(*)36
36 18 (457) (Prefix)-18-45(*)36 309/16 1211/16 1715/16 333/8 1313/16 199/16 341/8 141/8 20 3413/16 147/16 203/8 351/2 1411/16 2013/16
(914) 24 (609) (Prefix)-24-45(*)36 (776) (323) (456) (848) (351) (497) (867) (359) (508) (885) (367) (518) (902) (284) (402)
30 (762 (Prefix)-30-45(*)36
36 (914) (Prefix)-36-45(*)36
42 (1067) (Prefix)-42-45(*)36
6 (152) (Prefix)-06-45(*)48
9 (228) (Prefix)-09-45(*)48
12 (305) (Prefix)-12-45(*)48
48 18 (457) (Prefix)-18-45(*)48 391/16 163/16 227/8 417/8 173/8 249/16 425/8 175/8 2415/16 435/16 1715/16 253/8 44 181/4 2513/16
(1219) 24 (609) (Prefix)-24-45(*)48 (992) (411) (581) (1064) (441) (624) (1083) (448) (633) (1100) (456) (645) (1118) (464) (656)
30 (762 (Prefix)-30-45(*)48
36 (914) (Prefix)-36-45(*)48
42 (1067) (Prefix)-42-45(*)48
(Prefix) See page L-3 for catalog number prefix.
Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems L-14 Eaton

Series 2, 3, 4, & 5 - Fittings

Vertical Bend 30˚ (VO, VI)

1 pair splice plates with hardware included.

30˚ Vertical Outside -VO 30˚ Vertical Inside -VI

C
C

3" (76)
B

3" (76)
R B
C
C
A A

9 (228) (Prefix)-09-30(*)12
12 (305) (Prefix)-12-30(*)12
12 18 (457) (Prefix)-18-30(*)12 115/8 31/8 63/16 135/8 35/8 75/16 141/8 33/4 79/16 145/8 315/16 713/16 151/8 41/16 81/16
(305) 24 (609) (Prefix)-24-30(*)12 (296) (79) (157) (346) (92) (186) (359) (95) (192) (372) (100) (199) (384) (103) (205)
30 (762) (Prefix)-30-30(*)12
36 (914) (Prefix)-36-30(*)12
42 (1067) (Prefix)-42-30(*)12
6 (152) (Prefix)-06-30(*)24
9 (228) (Prefix)-09-30(*)24
12 (305) (Prefix)-12-30(*)24
24 18 (457) (Prefix)-18-30(*)24 175/8 411/16 97/16 195/8 51/4 101/2 201/8 53/8 103/4 205/8 51/2 111/16 211/8 55/8 115/16
(609) 24 (609) (Prefix)-24-30(*)24 (448) (120) (240) (499) (133) (267) (511 (137) (273) (524) (140) (282) (537) (143) (287)
30 (762 (Prefix)-30-30(*)24
36 (914) (Prefix)-36-30(*)24
42 (1067) (Prefix)-42-30(*)24
6 (152) (Prefix)-06-30(*)36
9 (228) (Prefix)-09-30(*)36
12 (305) (Prefix)-12-30(*)36
36 18 (457) (Prefix)-18-30(*)36 235/8 65/16 125/8 255/8 67/8 1311/16 261/8 7 14 265/8 71/8 141/4 271/8 71/4 141/2
(914) 24 (609) (Prefix)-24-30(*)36 (600) (160) (321) (651) (174) (348) (663) (175) (356) (676) (181) (362) (689) (184) (287)
30 (762 (Prefix)-30-30(*)36
36 (914) (Prefix)-36-30(*)36
42 (1067) (Prefix)-42-30(*)36
6 (152) (Prefix)-06-30(*)48
9 (228) (Prefix)-09-30(*)48
12 (305) (Prefix)-12-30(*)48
48 18 (457) (Prefix)-18-30(*)48 295/8 715/16 157/8 315/8 87/16 1615/16 321/8 85/8 173/16 325/8 83/4 171/2 331/8 87/8 173/4
(1219) 24 (609) (Prefix)-24-30(*)48 (753) (202) (403) (803) (214) (430) (816) (219) (437) (829) (222) (445) (842) (226) (451)
30 (762 (Prefix)-30-30(*)48
36 (914) (Prefix)-36-30(*)48
42 (1067) (Prefix)-42-30(*)48
(Prefix) See page L-3 for catalog number prefix.
Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-15 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Fittings

Vertical Tee Up/Down (VTU/VT)

2 pair splice plates with hardware included.

Down - VT

H
Up - VTU

3" (76)
A R

Bend Tray Vertical Tee Down Vertical Tee Up Side Rail Height "H"
Radius Width 4" 5" 6" 7"
R Catalog No. Catalog No. A B A B A B A B
in./(mm) in. mm in./(mm) in./(mm) in./(mm) in./(mm) in./(mm) in./(mm) in./(mm) in./(mm)

6 (152) (Prefix)-06-VT12 (Prefix)-06-VTU12

Series 2, 3, 4, & 5 Fittings

(228) (Prefix)-09-VT12 (Prefix)-09-VTU12
12 (305) (Prefix)-12-VT12 (Prefix)-12-VTU12
12 18 (457) (Prefix)-18-VT12 (Prefix)-18-VTU12 15 34 15 35 15 36 15 37
(305) 24 (609) (Prefix)-24-VT12 (Prefix)-24-VTU12 (381) (846) (381) (889) (381) (914) (381) (940)
30 (762) (Prefix)-30-VT12 (Prefix)-30-VTU12
36 (914) (Prefix)-36-VT12 (Prefix)-36-VTU12
42 (1067) (Prefix)-42-VT12 (Prefix)-42-VTU12
6 (152) (Prefix)-06-VT24 (Prefix)-06-VTU24
9 (228) (Prefix)-09-VT24 (Prefix)-09-VTU24
12 (305) (Prefix)-12-VT24 (Prefix)-12-VTU24
24 18 (457) (Prefix)-18-VT24 (Prefix)-18-VTU24 27 58 27 59 27 60 27 61
(609) 24 (609) (Prefix)-24-VT24 (Prefix)-24-VTU24 (6867) (1473) (686) (1498) (686) (1524) (686) (1549)
30 (762) (Prefix)-30-VT24 (Prefix)-30-VTU24
36 (914) (Prefix)-36-VT24 (Prefix)-36-VTU24
42 (1067) (Prefix)-42-VT24 (Prefix)-42-VTU24
6 (152) (Prefix)-06-VT36 (Prefix)-06-VTU36
9 (228) (Prefix)-09-VT36 (Prefix)-09-VTU36
12 (305) (Prefix)-12-VT36 (Prefix)-12-VTU36
36 18 (457) (Prefix)-18-VT36 (Prefix)-18-VTU36 39 82 39 83 39 84 39 85
(914) 24 (609) (Prefix)-24-VT36 (Prefix)-24-VTU36 (991) (2083) (991) (2108) (991) (2134) (991) (2159)
30 (762) (Prefix)-30-VT36 (Prefix)-30-VTU36
36 (914) (Prefix)-36-VT36 (Prefix)-36-VTU36
42 (1067) (Prefix)-42-VT36 (Prefix)-42-VTU36
6 (152) (Prefix)-06-VT48 (Prefix)-06-VTU48
9 (228) (Prefix)-09-VT48 (Prefix)-09-VTU48
12 (305) (Prefix)-12-VT48 (Prefix)-12-VTU48
48 18 (457) (Prefix)-18-VT48 (Prefix)-18-VTU48 51 106 51 107 51 108 51 109
(1219) 24 (609) (Prefix)-24-VT48 (Prefix)-24-VTU48 (1295) (2692) (1295) (2718) (1295) (2743) (1295) (2769)
30 (762) (Prefix)-30-VT48 (Prefix)-30-VTU48
36 (914) (Prefix)-36-VT48 (Prefix)-36-VTU48
42 (1067) (Prefix)-42-VT48 (Prefix)-42-VTU48

(Prefix) See page L-3 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems L-16 Eaton

Series 2, 3, 4, & 5 - Fittings

Cable Support Fittings (CSF)

1 pair splice plates with hardware included.

3" (76)
R This fitting is recommended for use
at the top of vertical runs to support
the weight of the cables. The top
cross brace is drilled for installing
eyebolts, ordered separately.
B

Bend Tray Side Rail Height "H"

Radius Width 4" 5" 6" 7"
R Catalog No. A B A B A B A B
in./(mm) in. mm in./(mm) in./(mm) in./(mm) in./(mm) in./(mm) in./(mm) in./(mm) in./(mm)

6 152 (Prefix)-06-CSF12
Series 2, 3, 4, & 5 Fittings

9 228 (Prefix)-09-CSF12
12 305 (Prefix)-12-CSF12
12 18 457 (Prefix)-18-CSF12 19 15 20 15 21 15 22 15
(305) 24 609 (Prefix)-24-CSF12 (483) (381) (508) (381) (533) (381) (559) (381)
30 762 (Prefix)-30-CSF12
36 914 (Prefix)-36-CSF12
42 1067 (Prefix)-42-CSF12
6 152 (Prefix)-06-CSF24
9 228 (Prefix)-09-CSF24
12 305 (Prefix)-12-CSF24
24 18 457 (Prefix)-18-CSF24 31 27 32 27 33 27 34 27
(609) 24 609 (Prefix)-24-CSF24 (787) (686) (813) (686) (838) (686) (864) (686)
30 762 (Prefix)-30-CSF24
36 914 (Prefix)-36-CSF24
42 1067 (Prefix)-42-CSF24
6 152 (Prefix)-06-CSF36
9 228 (Prefix)-09-CSF36
12 305 (Prefix)-12-CSF36
36 18 457 (Prefix)-18-CSF36 43 39 44 39 45 39 46 39
(914) 24 609 (Prefix)-24-CSF36 (1092) (991) (1118) (991) (1143) (991) (1168) (991)
30 762 (Prefix)-30-CSF36
36 914 (Prefix)-36-CSF36
42 1067 (Prefix)-42-CSF36
6 152 (Prefix)-06-CSF48
9 228 (Prefix)-09-CSF48
12 305 (Prefix)-12-CSF48
48 18 457 (Prefix)-18-CSF48 55 51 56 51 57 51 58 51
(1219) 24 609 (Prefix)-24-CSF48 (1397) (1295) (1422) (1295) (1448) (1295) (1473) (1295)
30 762 (Prefix)-30-CSF48
36 914 (Prefix)-36-CSF48
42 1067 (Prefix)-42-CSF48
(Prefix) See page L-3 for catalog number prefix.
Width dimensions are to inside wall. For aluminum fittings add 1.5 inches (38mm) for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton L-17 B-Line series Cable Tray Systems

Series 2, 3, 4, & 5 - Notes

Series 2, 3, 4, & 5 Fittings

B-Line series Cable Tray Systems L-18 Eaton

Ctap03 PDF
No ratings yet
Ctap03 PDF
207 pages
Designing A Cable Tray
No ratings yet
Designing A Cable Tray
20 pages
Cable Trays PILGRIM
No ratings yet
Cable Trays PILGRIM
6 pages
Dimensions, Weights and Properties of Special and Standard Structural Steel Shapes Manufactured by Bethlehem Steel Company
From Everand
Dimensions, Weights and Properties of Special and Standard Structural Steel Shapes Manufactured by Bethlehem Steel Company
George H. Blakeley
No ratings yet
Series3-4-StainlessSteel
No ratings yet
Series3-4-StainlessSteel
18 pages
LST StraightSections 5NEMAVE 1LoadingDepth
No ratings yet
LST StraightSections 5NEMAVE 1LoadingDepth
1 page
EatonCorp-BLine_00485_I3_I4_CAT
No ratings yet
EatonCorp-BLine_00485_I3_I4_CAT
2 pages
Bandejas Portacables Aluminio Acero B Line
No ratings yet
Bandejas Portacables Aluminio Acero B Line
46 pages
LST-StraightSections-5NEMAVE-1LoadingDepth
No ratings yet
LST-StraightSections-5NEMAVE-1LoadingDepth
1 page
Cable Tray Cooper
No ratings yet
Cable Tray Cooper
14 pages
Sub 28
No ratings yet
Sub 28
6 pages
b Line Fiberglass Bandejas (1)
No ratings yet
b Line Fiberglass Bandejas (1)
8 pages
Cooper Cable Tray
No ratings yet
Cooper Cable Tray
37 pages
Aluminum Cable Tray
No ratings yet
Aluminum Cable Tray
84 pages
Cable Ladder Leaflet
No ratings yet
Cable Ladder Leaflet
8 pages
B Line Cable Tray Design Considerations
No ratings yet
B Line Cable Tray Design Considerations
32 pages
EATON__full-cable-tray-specification-document
No ratings yet
EATON__full-cable-tray-specification-document
4 pages
S8A Series Cable Tray
No ratings yet
S8A Series Cable Tray
2 pages
Catalog Pt. NPS
No ratings yet
Catalog Pt. NPS
39 pages
Cooper B Line 9zn5324 Catalog Page
No ratings yet
Cooper B Line 9zn5324 Catalog Page
8 pages
Katalog Kabel Tray-Dikonversi
No ratings yet
Katalog Kabel Tray-Dikonversi
66 pages
Abrazadera Para Cable Xlp
No ratings yet
Abrazadera Para Cable Xlp
6 pages
Catalogue Cable Tray Rev
No ratings yet
Catalogue Cable Tray Rev
40 pages
Eaton B Line Canadian Cable Tray Sizing Program With Flextray
No ratings yet
Eaton B Line Canadian Cable Tray Sizing Program With Flextray
11 pages
Cer Alum Ladder Tray Catalog
No ratings yet
Cer Alum Ladder Tray Catalog
37 pages
Structural Steel Savings: For Cable Ladder Support Systems in Industrial Environments
No ratings yet
Structural Steel Savings: For Cable Ladder Support Systems in Industrial Environments
8 pages
Designing A Cable Tray
No ratings yet
Designing A Cable Tray
20 pages
Structural Steel Savings With CoSPEC
No ratings yet
Structural Steel Savings With CoSPEC
41 pages
SECTION 161xx Cable Trays: D. ASTM A1011 - Specification For Steel, Sheet and Strip, Hot-Rolled, Carbon
No ratings yet
SECTION 161xx Cable Trays: D. ASTM A1011 - Specification For Steel, Sheet and Strip, Hot-Rolled, Carbon
6 pages
Wiring WLBD030
No ratings yet
Wiring WLBD030
20 pages
EIM 4 Lesson 2 Cable Tray
100% (2)
EIM 4 Lesson 2 Cable Tray
64 pages
Cable Tray Load Factor and Spec PDF
No ratings yet
Cable Tray Load Factor and Spec PDF
7 pages
Catalog Ladder
No ratings yet
Catalog Ladder
25 pages
Cable Tray Choice
No ratings yet
Cable Tray Choice
2 pages
Cooper Bline Channel Cable Tray
No ratings yet
Cooper Bline Channel Cable Tray
16 pages
Infitra Cable TRay 2
No ratings yet
Infitra Cable TRay 2
12 pages
Cable Tray Manual - Cooper Industries
No ratings yet
Cable Tray Manual - Cooper Industries
31 pages
Cable Tray Quotation Guide
No ratings yet
Cable Tray Quotation Guide
1 page
Manual in DepthNEC PDF
No ratings yet
Manual in DepthNEC PDF
31 pages
CableFixing PDF
No ratings yet
CableFixing PDF
6 pages
Specs Ladder Cable Tray Light
No ratings yet
Specs Ladder Cable Tray Light
1 page
Accessories: In. MM In. MM
No ratings yet
Accessories: In. MM In. MM
9 pages
Flex Tray
No ratings yet
Flex Tray
56 pages
General Notes On Cable Trays
No ratings yet
General Notes On Cable Trays
5 pages
Type of Cable Tray
No ratings yet
Type of Cable Tray
6 pages
Tray Support 2
No ratings yet
Tray Support 2
28 pages
Cable Tray Systems: Systems That Make Sense
No ratings yet
Cable Tray Systems: Systems That Make Sense
184 pages
COOPER B LINE - Cable Tray Selection - Choosing The Proper Support Spacing
No ratings yet
COOPER B LINE - Cable Tray Selection - Choosing The Proper Support Spacing
2 pages
Cable Tray
No ratings yet
Cable Tray
51 pages
3b. Cable Tray-Catalogue (U-Li)
No ratings yet
3b. Cable Tray-Catalogue (U-Li)
39 pages
Cable Tray
No ratings yet
Cable Tray
4 pages
Type of Cable Tray
No ratings yet
Type of Cable Tray
10 pages
Uses of ASME Boiler & Pressure Vessels Codes
From Everand
Uses of ASME Boiler & Pressure Vessels Codes
Chetan Singh
No ratings yet
Cylindrical Compression Helix Springs For Suspension Systems
From Everand
Cylindrical Compression Helix Springs For Suspension Systems
Andrea Faussone
No ratings yet
Gage Making and Lapping
From Everand
Gage Making and Lapping
CSPacademic
No ratings yet
The Unofficial WG K7000 Repair Guide: Arcade Monitor Troubleshooting Guides, #1
From Everand
The Unofficial WG K7000 Repair Guide: Arcade Monitor Troubleshooting Guides, #1
Matt Hendrix
No ratings yet
Helical Compression Cylindrical Springs
From Everand
Helical Compression Cylindrical Springs
Andrea Faussone
No ratings yet
An Introduction to Metal-Working (Illustrated)
From Everand
An Introduction to Metal-Working (Illustrated)
J.C. Pearson
2.5/5 (2)
BASIC WELDING HANDBOOK
From Everand
BASIC WELDING HANDBOOK
SN SHAHRUL
No ratings yet
Classic Handplanes and Joinery: Essential Tips and Techniques for Woodworkers
From Everand
Classic Handplanes and Joinery: Essential Tips and Techniques for Woodworkers
Scott Wynn
No ratings yet
Monographs (In Alphabetical Order of Plant Name) 1: WHO Monographs On Selected Medicinal Plants
No ratings yet
Monographs (In Alphabetical Order of Plant Name) 1: WHO Monographs On Selected Medicinal Plants
3 pages
Caterpillar Cat 323D L Excavator (Prefix PBE) Service Repair Manual Instant Download
No ratings yet
Caterpillar Cat 323D L Excavator (Prefix PBE) Service Repair Manual Instant Download
29 pages
MODULE 5 Typical Engineering Materials
No ratings yet
MODULE 5 Typical Engineering Materials
39 pages
s71500 Structure and Use of The PLC Memory Function Manual en-US en-US
No ratings yet
s71500 Structure and Use of The PLC Memory Function Manual en-US en-US
82 pages
General IELTS Reading Test 4 Answers - IELTS Fever
No ratings yet
General IELTS Reading Test 4 Answers - IELTS Fever
5 pages
Jan 2024(4)
No ratings yet
Jan 2024(4)
7 pages
ULIP Periodical Disclosure As On 31.07.2024 - Compressed
No ratings yet
ULIP Periodical Disclosure As On 31.07.2024 - Compressed
70 pages
Last Rank p6
No ratings yet
Last Rank p6
6 pages
L U M O U N T A I N E W S: Dear!members!and!friends
No ratings yet
L U M O U N T A I N E W S: Dear!members!and!friends
9 pages
Transaxle Hybrid Vehicle Altima
No ratings yet
Transaxle Hybrid Vehicle Altima
36 pages
UI - SC298Corr1 - Nov - 2023 - CLN - Interpretations of Various Performance Standards Related To GMDSS Radio Installations
No ratings yet
UI - SC298Corr1 - Nov - 2023 - CLN - Interpretations of Various Performance Standards Related To GMDSS Radio Installations
3 pages
P.7 Ple MTC Series 2
No ratings yet
P.7 Ple MTC Series 2
16 pages
Transformers: Shell Type
No ratings yet
Transformers: Shell Type
5 pages
Effect of Change in Frequency On Operation and Performance of Three Phase Induction Motor
100% (1)
Effect of Change in Frequency On Operation and Performance of Three Phase Induction Motor
4 pages
Vietnam Plastic Industry Report (EN) - VCBS - 2016 PDF
No ratings yet
Vietnam Plastic Industry Report (EN) - VCBS - 2016 PDF
21 pages
BASICEEL Expt8 Lab Report Jvbautista
No ratings yet
BASICEEL Expt8 Lab Report Jvbautista
12 pages
Individual Performance Commitment and Review Form (Ipcrf) For Teacher I-Iii
100% (1)
Individual Performance Commitment and Review Form (Ipcrf) For Teacher I-Iii
18 pages
Cryptographic Primitives (2)
No ratings yet
Cryptographic Primitives (2)
40 pages
Unit 8 Supervip Key Ngày 24-1
No ratings yet
Unit 8 Supervip Key Ngày 24-1
18 pages
Cissell HD175lb Dryer Manual
No ratings yet
Cissell HD175lb Dryer Manual
73 pages
Root Verses of The Intermediate State: Selected by Jampa Namgyal
No ratings yet
Root Verses of The Intermediate State: Selected by Jampa Namgyal
9 pages
Bayesian Estimation of Concordance Among Gene Trees
No ratings yet
Bayesian Estimation of Concordance Among Gene Trees
15 pages
6 Eng 111 Module 6
No ratings yet
6 Eng 111 Module 6
11 pages
About-Counselorsgrade-12-Humss (12) Powerpoint.
No ratings yet
About-Counselorsgrade-12-Humss (12) Powerpoint.
28 pages
Pollution Essay
100% (1)
Pollution Essay
7 pages
1101 Chapter+10+Essential+Peripherals+-+Slide+Handouts
No ratings yet
1101 Chapter+10+Essential+Peripherals+-+Slide+Handouts
29 pages
Microsoft PowerPoint - 04-Delay Analysis Types
No ratings yet
Microsoft PowerPoint - 04-Delay Analysis Types
8 pages
P4
No ratings yet
P4
5 pages
Q3 DLP Taking a Stand to a Material Viewed
No ratings yet
Q3 DLP Taking a Stand to a Material Viewed
3 pages
NSTP 012 - WEEK 2 - National Service Training Program (CWTS)
No ratings yet
NSTP 012 - WEEK 2 - National Service Training Program (CWTS)
4 pages

BLINE

Uploaded by

BLINE

Uploaded by

Series 1 Steel - Straight Sections

Eaton H-1 B-Line series Cable Tray Systems

B-Line series Cable Tray Systems H-2 Eaton

3" NEMA VE 1 Loading Depth

Straight Section Part Numbering

Series Material Type Width Length

Ladder Type Ventilated Bottom Non-Ventilated

Eaton H-3 B-Line series Cable Tray Systems

4" NEMA VE 1 Loading Depth

Straight Section Part Numbering

Series Material Type Width Length

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-4 Eaton

5" NEMA VE 1 Loading Depth

Straight Section Part Numbering

Series Material Type Width Length

Ladder Type Ventilated Bottom Non-Ventilated

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-5 B-Line series Cable Tray Systems

6" NEMA VE 1 Loading Depth

Straight Section Part Numbering

Series Material Type Width Length

All dimensions in parentheses are millimeters unless otherwise specified.

Expansion (L-Shaped) Splice Plates

Universal Splice Plates

Step Down Splice Plates

Vertical Adjustable Splice Plates

Horizontal Adjustable Splice Plates 9(*)-803(X)-12 or 9(*)-803(X)-36

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-7 B-Line series Cable Tray Systems

Offset Reducing Splice Plate

Tray to Box Splice Plates

Frame Type Box Connector

Pre-Galvanized Tray Hardware Hot Dip Galvanized Tray Hardware

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-8 Eaton

Conduit to Tray Adaptor

Cable Tie (Ladder Tray)

Cable Tray Clamp/Guide

Ground Wire Clamp

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-9 B-Line series Cable Tray Systems

1/2-13 36, 72, 120, 144

Hanger Rod Clamp

Cantilever Bracket (12” - 42”)

Catalog Uniform Load Tray Width 'A' 'H'

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-10 Eaton

B409-12 960 (4.27) 6 & 9 (152 & 229) 12 (304.8)

B297-30 665 (2.95) 24 (609.6) 30 (762.0)

Underfloor Support (U-Bolts not included)

U-Bolt Size Fits Pipe O.D.

B501-21/2 2.376 - 2.875

B441-22 1200 (5.34) 33/8 (86)

Steel C-Clamp With Locknut

All dimensions in parentheses are millimeters unless otherwise specified.

Eaton H-11 B-Line series Cable Tray Systems

Mat'l. Thickness 3/8" (9.5mm) 1/4" (6.4mm)

B305 Thru B308 & B321 Series Beam Clamps

B751 Bottom Beam Clamp and Accessories

Assembly No. B751 B701J_ B752 B753

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-12 Eaton

(1) B22 Channel

Heavy Duty Trapeze Support Kit

Trapeze Hardware Kit

Eaton H-13 B-Line series Cable Tray Systems

• (*) Insert P or G H 148 72(*)-Length 2.8 (58)

Barrier Strip Splice

All dimensions in parentheses are millimeters unless otherwise specified.

B-Line series Cable Tray Systems H-14 Eaton

Solid Non-Flanged Solid Flanged Ventilated Flanged

Covers Part Numbering

Cover Type Detail Material Tray Width Item Description

Example of Catalog Number for Fitting Cover:

Side Rail* Height

Horizontal Adjustable Splice Plates 9()-803(X)-12 or 9()-803(X)-36

• () Insert P or G H 148 72()-Length 2.8 (58)