Heatex Select Online Version 526.
0
2024-11-06
Reference number: 655008
For price contact your local sales representative
Total dimensions (W x H x d): 3840 x 3840 x 500 mm
Total weight: 1073 kg
Heat Exchanger - Product code EQD3840x3840-3700V-018-6D0OO-6API-2
EQ D 3840x3840 3700 V 018 6 D 0 OO 6 A P I 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Pos Product Configuration Principle Drawing
1 Model EQ
2 Matrix material Silica gel (Adsorption)
3 Casing dimensions (W x H) 3840 x 3840 mm
4 Rotor diameter 3700 mm
5 Exchanger orientation Vertical
6 Well height 1.8 mm
7 Hub External bearing with fixed shaft
8 Casing type Standard
9 Purge sector None
10 Casing options Standard product
11 Drive equipment Constant drive 3x380-420V
12 Motor position Floor left side
13 Drive belt Power belt
14 Rotation detector Included in control unit
15 Seal Brush seal
Performance Results Winter Summer
Unit Supply air Exhaust air Supply air Exhaust air
Air flow (in/out) Nm³/h 53013.18 / 53013.18 43730.96 / 43730.96
Air flow (in/out) m³/h 55780 / 54613.43 44626 / 45792.69
Pressure drop1 Pa 190 / 177 154 / 146
Temp./ humidity/ enthalpy efficiency % 69 / 67 / 68 N/A
Temp./ humidity/ enthalpy effectiveness % 84 / 81 / 82 84 / 81 / 82
Temperature before/after °C 35.3 / 28.8 26 / 33.8
Temperature (wet bulb) before/after °C 28.6 / 23.3 20.3 / 27.3
Relative humidity before/after % 61.3 / 63.2 59.8 / 61.3
Absolute humidity (dry air) before/after g/kg 22.27 / 15.78 12.58 / 20.45
Air velocity (face/channel) m/s 3.06 / 3.51 2.45 / 2.88
Inlet air pressure (abs) Pa 101325
Differential pressure Pa 250
Transferred power kW 411.8
Condensate l/h 0 (Tcond < 21.2°C)
EATR/OACF %/- 1.56 / 1.03
Energy efficiency/class5 % 75 / H1
Erp efficiency % 77
1Actual pressure drop/pressure drop corrected to density 1.2 kg/m³ or 0.075 lb/ft3
5Energy efficiency and class is calculated according to EN 13053. Heatex does this calculation without motor power consumption.
14Adsorption and enthalpy wheel based on silica gel material is from January 1st, 2024, only available from Heatex Shanghai factory
Adsorption and enthalpy wheel based on silica gel material is from January 1st, 2024, only available from Heatex Shanghai factory
1/2
Heatex Select Online Version 526.0
2024-11-06
Notes
Further resources can be found at:
[Link]/resources
The calculations are made in accordance with the European norm EN308 and its sub-documents. Owing to continued product development, Heatex
reserves the right to introduce alterations in both design and prices without prior notice.
Heatex AB Tel: +46 410 710 500 [Link]
Hyllie Boulevard 34 Email: info@[Link]
SE-215 32 Malmð
2/2
