HPCO2 Component Description
45 kg (100 lb.) CO2
Cylinder & Valve Assembly
Effective: January 2019
P/N 81-100067-00X K-81-9151 Rev AC
FEATURES
• 67 Liter Cylinder - US DOT 3AA-2130 Specification • Straight Siphon Tube
• 100-lbm (45-kg) CO2 Capacity • Underwriters' Laboratories Listed - File Number EX923
• 0F (-18C) to 130F (55C) agency temperature range • United States Coast Guard Approved
• Type I Valve, 5/8"
DESCRIPTION
Kidde Fire Systems' High-Pressure Carbon Dioxide
(CO2) Fire Suppression Systems use seamless steel cyl-
inders to store carbon dioxide agent. The agent is stored
under its own vapor pressure as a non-flammable com-
pressed gas. Due to the physical properties of CO2, both
the vapor and liquid state are present within the cylinder. CAP SUPPLIED
WITH CYLINDER
Each assembly is factory fitted with a discharge valve EMPTY WT.
and siphon tube. A US DOT compliant safety relief
LBS.
FULL WT.
LBS.
device, protecting the cylinder from over pressurization,
is provided as part of the discharge valve assembly.
For shipment, a standard shipping cap is included, which
mates to external threads on the cylinder neck to protect
the discharge valve from inadvertent damage.
Prior to removing the shipping cap, each cylinder shall be
properly secured using cylinder straps or Framing/Oak
Rack Kits as required.
The discharge valve cannot dispense the cylinder con-
tents without a properly attached discharge head. This
feature provides an enhanced safeguard during trans-
port. A discharge flex hose connects the discharge head 1592.6 mm
(62.7 in.)
to the system manifold. Alternatively, a swivel adapter REF
may be used in place of a discharge flex hose to connect 1491.0 mm
to the system manifold. (58.7 in.)
REF
One or more control heads will be required to actuate a
manifold of cylinders.
After discharge, charging accessories are required to
safely vent any residual pressure to service the dis-
charge valve and then re-fill the cylinder.
283310
267.5 mm
(10.53 in.)
REF.
Figure 1. Cylinder
1
ORDERING INFORMATION
Description Application Approvals Part Number
Cylinder & Valve Assembly, 100-lbm Industrial UL Only 81-100067-001
Cylinder & Valve Assembly, 100-lbm Marine UL & USCG 81-100067-003
REFERENCED COMPONENTS
Description Reference Data Sheet
Discharge Valve, 5/8" K-81-1050
Discharge Head, Plain Nut K-81-1060
Discharge Head, Groove Nut K-81-1070
Discharge Hose, ¾" NPT K-81-1090
Adapter, Swivel K-81-1105
Cylinder Strap, Single K-81-1230
Cylinder Strap, Double K-81-1240
Control Head K-81-8010*
K-81-6020*
Charging Accessories K-81-9110
Framing Kits See manual:
81-CO2MAN-001
Oak Rack Kits See manual:
220610
* Typical listed see referenced manuals for all applicable control heads.
EXPORT INFORMATION (USA)
Jurisdiction: EAR
Classification: EAR99
This document contains technical data subject to the EAR.
KIDDE is a registered trademark of Kidde-Fenwal, Inc., or its parents, subsidiaries or affiliates.
This literature is provided for informational purposes only. KIDDE-FENWAL, INC. believes this data to be accurate, but it is published and presented without any guarantee
or warranty whatsoever. KIDDE-FENWAL, INC. assumes no responsibility for the product's suitability for a particular application. Product features specified are only
applicable when the fire suppression system is correctly designed, installed, maintained and serviced by trained, authorized Kidde Fire Systems distributors as per the
applicable design, installation, operation, and maintenance manuals. If you need more information on this product, or if you have a particular problem or question, contact:
KIDDE-FENWAL, INC., Ashland, MA 01721 USA, Telephone: (508) 881-2000.
2 Kidde Fire Systems
400 Main Street
Ashland, MA 01721
K-81-9151 Rev AC Ph: 508.881.2000
Fax: 508.881.8920
©2019 Kidde-Fenwal, Inc. www.kiddefiresystems.com
