FILTER CARTRIDGE

CATALOGUE
Hengshui Snowate Environmental
Technology Co., Ltd.

2024
EDITION FOR
SNOWATE CATALOG

www.snowate.com
 MELT BLOWN FILTER CARTRIDGE

[ Product Description ]
Melt blown filter cartridges are tubular filter cartridges made of non-toxic, odorless PP particles after heating, melting, spinning, drawing and
forming. If the raw material is mainly PP, it is called as PP melt blown filter cartridge. Melt blown filter cartridge are not only used in large quantities
for water purification, but also have excellent chemical compatibility suitable for the filtration of strong acids, strong bases and organic solvents. It
has great dirt holding capacity, long service life and low production cost. In addition, melt blown filter cartridges are high quality and are available at
an affordable price. We have a variety of product models. All our raw materials are scientifically tested and play an important role in filtration.

[ Benefits ]

● High filtration efficiency, accurate filter rating, uniform filter cartridge pores. Up to 85% filtration efficiency.
● Low filtration resistance, high flow, high dirt holding capacity and long service life. During the production process, the fiber diameter and gap
are adjustable. The filter cartridge pore is small in inner layers and large in outer layers, which enhances its flow and dirt holding capacity and
makes the filter cartridge is not easily clogged, thereby extending its service life.

● High cleanness, no pollution to water quality, great resistant to acids, bases, organic solvents and corrosion.

● High strength. When the differential pressure between the filter inlet and outlet exceeds 0.4 MPa, the filter cartridge will not deform; when the
temperature is greater than 90 °C, the filtration efficiency will be significantly reduced.

● It has high hydrophilcity after PP treatment and can absorb 10 times the weight of water, so it can be used in oil and water separation
applications.

● Microelectronics: electroplating liquids, cleaning fluids, chemicals, solvents

● Food & beverage: soft drinks, alcoholic beverage, bottled water
● Petrochemicals: oilfield flooding, fine chemicals, acid-base solvents
[ Application ]
● Biological medicine: eye drops, oral liquids and medicament prefiltration
● Water treatment: RO systems, seawater desalination, tap water prefiltration·
● Drinking water: water purifiers, water dispensers, filters

Filter rating 1, 5, 10, 25, 50, 75, 100 μm

pH range 1-13

Differential pressure Positive, 0.4 MPa

Operating temperature At 0.25 MPa, ＜ 70 °C

The Water extract of filtration column shall be tested by IAL and the
Endotoxin
endotoxin content shall not be lower than 0.5 EU/ml.

One-stop purchase supplier of water treatment industry

09
 STRING WOUND FILTER CARTRIDGE

[ Product Description ]
String wound filter cartridge is a kind of filter cartridge for depth filtration at low viscosity and low impurity content conditions. It is made of textile
fiber yarn (polypropylene yarn, skim cotton yarn, etc.). These yarns are precisely wound on the porous skeleton (PP or stainless steel) to form a
honeycomb structure that is loose outside and dense inside. As a result, it offers excellent filtration and absorption performance and can effectively
remove suspended solids, fine particles, rust and other impurities from fluids. String wound filter cartridges are high quality and are available at an
affordable price.

[ Benefits ]

High filtration accuracy, low differential pressure, high flow, high dirt holding capacity and long service life.

Filter pores are small inside and large outside to offer good depth filtration effect.

Filter cartridges are made of various materials to meet the filtration requirements of various liquids and achieve an ideal filtration
effect.

● Microelectronics: electroplating liquids, cleaning fluids, chemicals, solvents

● Food & beverage: soft drinks, alcoholic beverage, bottled water
● Petrochemicals: oilfield flooding, fine chemicals, acid-base solvents
[ Application ] ● Biological medicine: eye drops, oral liquids and medicament prefiltration
● Water treatment: RO systems, seawater desalination, tap water prefiltration
● Inks & paints: inks, ink-jet printers, paints, coatings

Outer dimensions 10", 20", 30", 40"

Microns 1 μm, 3 μm, 5 μm, 10 μm, 20 μm, 30 μm, 50 μm, 70 μm, 100 μm

Plastic skeleton polypropylene yarn core: 70 °C; Stainless steel skeleton polypropylene
Temperature resistance
yarn core: < 90 °C; Stainless steel skeleton absorbent cotton yarn core: <120 °C.

Take filter cartridge with a length of 10" at a differential pressure of 0.02 MPa and media
is clear water at room temperature as an example.
Flow rating
Filter rating (μm): 1, 3, 5, 10, 20, 30, 50
High flow rating (m3/h) 0.3, 0.4, 0.5, 1.1, 1.5, 2, 2.5

One-stop purchase supplier of water treatment industry

10
 PP PLEATED
FILTER
CARTRIDGE

[ Product Description ]
PP pleated filter cartridge is made of ultra-fine PP fiber membrane and non-woven fabric or woven nets, inner and outer support layers by pleating.
The cage, core and end cap are fabricated by thermal bond technology. It contains no adhesive, no leakage and no secondary pollution.
The pleated design offers a large membrane filter area, high dirt holding capability, low differential pressure and long service life. The whole filter
cartridge is made of 100% pure PP to offer a wide range of chemical compatibility.

[ Advantages ]

Pure PP filter material.

Wide range of chemical compatibility, pH 1–14 resistance, high flow, low differential pressure and long service life.

Wide range of filter ratings for your option to meet the demands of various applications.

Thermal bond technology, firm structure and no foreign matter release.

● Chemicals: organic solvent and ink filtration.

● Electronics: reverse osmosis water system prefiltration, deionized water system prefiltration.
[ Application ] ● Gas filtration: compressed air, nitrogen and carbon dioxide filtration.
● Others:Filtration of electroplating fluids, metal cutting fluids, photoresist and magnetic
media, etc.

Filter rating 0.1, 0.22, 0.45, 1, 3, 5, 10, 20, 30, 50 μm

Length 5", 10", 20", 30", 40"

Diameter OD: φ68 mm; ID: φ28 mm

Connection type 215 222 226 M30 M36

One-stop purchase supplier of water treatment industry

11
 PES PLEATED FILTER CARTRIDGE

[ Product Description ]
PES series filter cartridge is constructed of hydrophilia asymmetric PES membrane and non-woven fabric and woven nets as support layer by
pleating. The cage, core and end cap are fabricated by thermal bond technology. No adhesives are used and the whole production process is
finished in clean rooms. 100% integrity tests are performed and are washed by high purity water. It is suitable for filtering weak acid solutions, weak
base solutions and high purity water.

[ Benefits ]

Asymmetric membrane structure.

100% filter cartridge integrity test.

Good hydrophilia filter membrane, high flow, evenly distributed pores.

Asymmetric membrane structure enhances the dirt holding capacity of the filter cartridge and extends its lifespan.

No adhesive or surfactant is used to effectively reduce the risk of precipitation.

[ Specification ]

Product dimensions [ OD ]: Φ69 mm

[ Length ]: 10", 20", 30", 40"

Construction material [ Media ]: Asymmetric PES membrane

[ Support/drainage layer ]: PP
[ Cage/core/end cap ]: PP

Technical data [ Max. operating temperature ]: 80 °C

[ Max. operating differential pressure ]: 4 bar@21 °C
2.4 bar@80 °C

● Pharmaceuticals ● Microelectronics
[ Application ] ● Food & beverage ● Fine chemicals

One-stop purchase supplier of water treatment industry

12
 HYDROPHILIC
PTFE PLEATED
FILTER
CARTRIDGE
[ Product Description ]
Hydrophilic PTFE pleated filter cartridge is constructed of hydrophilic PTFE membrane. It has excellent chemical compatibility and corrosion
resistant capability. It can filter aqueous solutions without pre-wetting due to its hydrophilic nature, which greatly saves the operating time and cost.

[ Benefits ]

PTFE membrane has great chemical compatibility and good tolerance to various feed liquids
and can filter various strong corrosive liquids.

It has good resistance to various chemicals and can be used to filter corrosive liquids such as etching and stripping liquids.

PTFE membrane provides high filtration efficiency to ensure the removal of impurity particles.

100% filter cartridge integrity test

[ Specification ]

Product dimensions [ OD ]: Φ69 mm Technical data [ Max. operating temperature ]: 80 °C

[ Length ]: 10", 20", 30", 40" [ Max. operating differential pressure ]: 4 bar@21 °C
2.4 bar@80 °C

Construction material [ Media ]: hydrophilic PTFE membrane

[ Support/drainage layer ]: PP
[ Cage/core/end cap ]: PP
[ Seal material ]: MVQ, EPDM, NBR, FPM, Teflon rubber, Teflon-coated FPM

● Pharmaceuticals ● Microelectronics
[ Application ] ● Food & beverage ● Fine chemicals

One-stop purchase supplier of water treatment industry

13
 HYDROPHOBIC
PTFE PLEATED
FILTER CARTRIDGE

[ Product Description ]
Hydrophobic PTFE filter cartridge is constructed of hydrophobic PTFE membrane to offer great chemical compatibility and corrosion resistant
capability. It is suitable for filtering strong corrosive and oxidizing liquids and gases.

[ Benefits ]

PTFE membrane has great chemical compatibility and good tolerance to various feed liquids
and can filter various strong corrosive liquids and gases.

Good resistance to impact and back pressure, and can withstand repeated high temperature steam sterilization.

Made of bonded PTFE and PP, no adhesive, clean and stable.

Suitable for pharmaceutical industry with high requirements.

[ Specification ]

Product dimensions [ OD ]: Φ69 mm Technical data [ Max. operating temperature ]: 80 °C

[ Length ]: 10", 20", 30", 40" [ Max. operating differential pressure ]: 4 bar@21 °C
2.4 bar@80 °C

Construction material [ Media ]: Hydrophobic PTFE membrane

[ Support/drainage layer ]: PP
[ Cage/core/end cap ]: PP
[ Seal material ]: MVQ, EPDM, NBR, FPM, Teflon rubber, Teflon-coated FPM

● Sterile storage tank respirator, air fermentation tank filtration;

● Solvent filtration: various esters such as butyl acetate and ethyl acetate, and various
[ Application ] alcohols such as acetone and dimethyl sulfoxide
● Sterilization and filtration of compressed air and nitrogen
● Suitable for pharmaceuticals, microelectronics, food & beverage, fine chemical, etc.

One-stop purchase supplier of water treatment industry

14
 NYLON PLEATED FILTER CARTRIDGE

[ Product Description ]
Nylon membrane filter cartridge takes nylon microfiltration membrane as filter material. We have 0.1μm, 0.22μm, 0.45μm, 1μm and 5μm pore
sizes for you to choose from. Thermal bond technology is adopted, no adhesives and no foreign matter falling off. Every filter cartridge must pass
integrity test to ensure the stability of the product performance. In addition, nylon membrane filter cartridges are high quality and are available at an
affordable price.

[ Benefits ]

Nylon membrane is hydrophilic and no pre-wetting is required.

Uniform pores and great flexibility and effectively ensure the retention capability of the
filter cartridge to meet the application requirements of fine filtration.

It has great chemical compatibility and is compatible with various chemical reagents,
and can withstand 50% H2O2 and 6% bleaching agent.

It features no fiber shedding and low precipitation matters and complies with the
application requirements of pharmaceutical and chemical industries.

● The filtration of electronics, microelectronics, semiconductors and other industrial water

● The filtration of solvent solutions
[ Application ] ● The filtration of high purity chemical products
● The filtration of beer, mineral water and beverage

Filter rating 0.1, 0.22, 0.45, 1, 5 μm

Filter media Nylon microfiltration membrane

Support/drainage PP

Cage/core/end cap PP

Seal method Thermal bond

Effective filter area ≥0.60 m2 / 10"

Filter cartridge diameter 69.0 mm

One-stop purchase supplier of water treatment industry

15
 HFSW1
HIGH FLOW
FILTER CARTRIDGE

[ Product Description ]
HFSW1 high flow filter cartridge is constructed of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6 inches
/ 152 mm, with center tube and one-way opening. It is specially designed to flow the liquid from inside to outside to ensure that all contaminant
particles are trapped inside the cartridge. The extra high flow design allows for a significant reduction in the number of cartridges and filters used in
the same flow rate applications, greatly saving equipment input costs and labor costs.

[ Benefits ]
Large effective filter area, low pressure drop and high flow.

Made of deep fine membrane material, its scientifically designed multi-layer gradient pore sizes enables the filter cartridge featuring high dirt
holding capacity and reduced user costs.

Filter rating ranges from 1 μm to 100 μm to meet different filtration requirements. 20", 40" and 60" are available in length.

[ Specification ]

Product dimensions
[ OD ]: 6" (152mm); [ ID ]: 3" (76mm)
[ Length ]: 20", 40", 60"

Construction material
[ Media ]: PP
[ Cage/core/end cap ]: PP
[ Seal material ]: EPDM(Normal), Silicone rubber, fluororubber, NBR(Normal) PALL type High Flow Filter Cartridge
Outside View

Model Filter rating (μm) Size Max. flow rating End Cap Note
20"
HFSW1 - 20 1,5,10,25,50,100 15 m³/h
(without core)
20"
HFSW1 - 20C 1,5,10,25,50,100 15 m³/h
(with core)
40"
HFSW1 - 40 1,5,10,25,50,100 30 m³/h Max. pressure
(without core)
difference
40" 1.5bar, < 80°C
HFSW1 - 40C 1,5,10,25,50,100 30 m³/h
(with core)
60"
HFSW1 - 60 1,5,10,25,50,100 45 m³/h
(without core)
60"
HFSW1 - 60C 1,5,10,25,50,100 45 m³/h
(with core)

One-stop purchase supplier of water treatment industry

16
 HFSW2 DOUBLE
SEAL TYPE
HIGH FLOW
FILTER CARTRIDGE
[ Product Description ]
HFSW2 Double Seal high flow filter cartridge is a replacement cartridge for the depth filtration and other 2-1/2" diameter cartridges for the high flow
applications, such as reverse osmosis pre-filtration and similar applications that nominal efficiency can meet corresponding requirements. The flow rate
of 60" filter cartridge is as high as 60 m3/h, which significantly reduce the number of filter cartridges and housing dimensions.
The treatment capacity of a HFSW2 Double Seal filter cartridge is equivalent to that of 10 pcs filter cartridges with an outer diameter of 2-1/2" and a
length of 40".

[ Benefits ] [ Outline Drawing ]

● High dirt holding capacity, longer service life.

● Less cartridge changes out to save the labor cost.
● O-ring design causes no bypass to ensure the filtration efficiency.
● Easy handling results in less manpower.
● Wide chemical compatibility for different applications.

Parker type High Flow Filter Cartridge (double O rings)

[ Specification ]

Product dimensions
[ OD ]: 6" (152mm); [ ID ]: 100mm
[ Length ]: 20", 40", 60"

Construction material
[ Media ]: PP
[ Cage/core/end cap ]: PP
[ Seal material ]: EPDM(Normal), Silicone rubber, fluororubber, NBR(Normal)

Model Filter rating (μm) Size Max. flow rating End Cap Note

1,5,10,15,20,
HFSW2 - 20C 20" (with core) 20 m³/h
40,70,100
Max. pressure
1,5,10,15,20,
HFSW2 - 40C 40" (with core) 40 m³/h difference
40,70,100
1.2bar, < 80°C
1,5,10,15,20,
HFSW2 - 60C 60" (with core) 60 m³/h
40,70,100

One-stop purchase supplier of water treatment industry

17
 HFSW3 SINGLE
SEAL TYPE
HIGH FLOW
FILTER CARTRIDGE
[ Product Description ]
HFSW3 Single Seal high flow filter cartridge is a replacement cartridge for the depth filtration and other 2-1/2" diameter cartridges for the high flow
applications, such as reverse osmosis pre-filtration and similar applications that nominal efficiency can meet corresponding requirements. The flow rate
of 60" filter cartridge is as high as 60 m3/h, which significantly reduce the number of filter cartridges and housing dimensions.
The treatment capacity of a HFSW3 Single Seal filter cartridge is equivalent to that of 10 pcs filter cartridges with an outer diameter of 2-1/2" and a
length of 40".

[ Benefits ] [ Outline Drawing ]

● High dirt holding capacity, longer service life.

● Less cartridge changes out to save the labor cost.
● O-ring design causes no bypass to ensure the filtration efficiency.
● Easy handling results in less manpower.
● Wide chemical compatibility for different applications.

Parker type High Flow Filter Cartridge (Single O ring)

[ Specification ]

Product dimensions
[ OD ]: 6" (152mm); [ ID ]: 110mm
[ Length ]: 20", 40", 60"

Construction material
[ Media ]: PP
[ Cage/core/end cap ]: PP
[ Seal material ]: EPDM(Normal), Silicone rubber, fluororubber, NBR(Normal)

Model Filter rating (μm) Size Max. flow rating End Cap Note

1,5,10,15,20,
HFSW3 - 20C 20" (with core) 20 m³/h
40,70,100
Max. pressure
1,5,10,15,20,
HFSW3 - 40C 40" (with core) 40 m³/h difference
40,70,100
1.2bar, < 80°C
1,5,10,15,20,
HFSW3 - 60C 60" (with core) 60 m³/h
40,70,100

One-stop purchase supplier of water treatment industry

18
 HFSW4 TYPE
HIGH FLOW
FILTER CARTRIDGE

[ Product Description ]
High flow filter cartridge adopts high performance PP non-woven fabrics to optimize its filtration performance and fluid quality to ensure our
customers' satisfaction. The filter cartridge adopts vertical pleats design to make the filter cartridge has a large effective filter area. Meltdown PP
microfibers have strictly controlled fiber diameters to ensure its absolute filter rating. Pleating technology ensures the filter material is pleated in a
more uniform way. The evenly distributed liquids in the whole filter material makes the full use of the filter area. In this design, we can ensure the
filtration effect in a more compact and smaller space and its large inner diameter allows the flow of single 60" cartridge up to 45 m3/h.

[ Specification ] [ Benefits ]
Product dimensions [ OD ]: Φ165 mm ● Gradient pore size structure
[ ID ]: 85mm ● When filtering water, the flow of a single cartridge is up to 15-45 m3/h.
[ Length ]: 20", 40", 60" ● The size of the filter system can be reduced by 50%.
● Filter cartridges are available in 20", 40" and 60" in length.
Construction material [ Media ]: PP ● The outside to inside flow direction ensures all impurities are trapped
[ Cage/core/end cap ]: PP outside the filter cartridge.
[ Seal material ]: EPDM(Normal), Silicone
rubber, fluororubber, NBR(Normal)

Outline Drawing

Model Filter rating (μm) Size Max. flow rating End Cap Note

1,5,10,15,20,
HFSW4 - 20 20" (without core) 15 m³/h
25,40,60,70
1,5,10,15,20,
HFSW4 - 20C 20" (with core) 15 m³/h
25,40,60,70
1,5,10,15,20,
HFSW4 - 40 40" (without core) 30 m³/h Max. pressure
25,40,60,70
difference
1,5,10,15,20, 1.5bar, < 80°C
HFSW4 - 40C 40" (with core) 30 m³/h
25,40,60,70
1,5,10,15,20,
HFSW4 - 60 60" (without core) 45 m³/h
25,40,60,70
1,5,10,15,20,
HFSW4 - 60C 60" (with core) 45 m³/h
25,40,60,70

One-stop purchase supplier of water treatment industry

19
 Ms Snow Zhao
[email protected]
Mobile: +86-15030811699
(WhatsApp, WeChat, Skype, Viber)

Hengshui Snowate Environmental Technology Co., Ltd.

www.snowate.com