“.. Energy saved is energy produced.

Electric water heaters

ELECTRIC WATER HEATERS
Meet the needs for fast and e cient hot water supply.
They are specially designed for durability in areas
with high level of water hardness.

Also availiable with heat exchanger for

connection with an auxiliary energy source.

SPECIFICATIONS (common for all types)

OPERATION VOLTAGE 230 V
MAXIMUM OPERATING PRESSURE 10 bar
TEST PRESSURE 15 bar
MAXIMUM OPERATING TEMPERATURE 90°C

TECHNICAL DATA
Steel and enamel water tank (GLASS)
❙ Water storage tank made of cold rolled steel The thermal tank is shaped in special patterns by robot welding process,
thus achieving: A) perfect enamel application, B ) avoid the deformation of the internal tank as well as the enamel
erosion in case of high pressure.
❙ Anti-corrosion internal layer of enamel baked at 860°C, according to DIN 4753 standard, for protection against electrolysis.
The enameling is done in our own high tech industrial facilities. The water tanks are checked individually upon exit from the
enameling unit assuring the top quality of the enamel.
❙ Hot water outlet (consumption): stainless steel ½” BSP male threaded pipe end with plastic adapter.
❙ Cold water inlet (supply): special shaped ½” BSP male threaded divider, for even water stratum.
❙ 10 bar non-return valve for safe and controlled hydraulic pressure relief.
❙ Steel pressed neck for the heating element without welding, with internal incision for easy and quick heating element
installation, no need for special tools (locknuts). Extraction and re-installation of the heating element in less than one
minute.
❙ Full bodied gasket for sealing the heating element from the thermal tank, thus protecting the heating element flange from
electrolysis and corrosion.
❙ Heating element rated according to the country of destination local regulations. It can be pulled away from the flange*.
❙ Heat exchanger with 3/4” BSP male threaded pipe ends, made of steel pipe, large exchange surface for use of the heating
produced by central heating systems during the winter (optional).
❙ Cathode protection by magnesium anode Φ22x300mm<60lt and Φ22x500mm>80lt for effective internal protection
against corrosion and mineral deposits caused by electrolytic reactions.
❙ Internal adjustable thermostat with bipolar protection and auxiliary fuse.
❙ Protective cover for the electrical section designed for easy access. It locks with just one screw. Ventilation holes
specially designed for safe water vapor aspiration.
❙ Sealed entry of the heating element connection cable, with a rubber collar on the cable.
❙ Operation indication light.
 ❙ Thermal insulation: ecological high-density (40kg/m 3) expanded polyurethane
ensures minimum heat loss, maintaining the hot water temperature.
❙ Insulation thermal conductivity: λ=0.023 W/m Κ (DIN 56612, measured at
10°C) (DIN EN ISO 845, DIN 53 421, ISO 4590, DIN ISO 2796).
❙ External housing with electrostatically robotized painted steel for protection
against corrosion.
❙ Side plastic caps
❙ Thermometer
❙ Mounting: vertical, horizontal or floor.
❙ Packed in carton boxes for safe and easy storage - transportation.WW
❙ CE Marking: compliance with European health, safety & environmental
protection legislation

❙ Energy Labeled (ERP):

C
D

8 – 20Lt D Class 30 – 200Lt C Class

* The electric power varies between 1200W and 4000W depending on the EWH capacity.
All electrical components carry the CE marking according to EN 60335-1 and EN60335-2-21 standards.

E A
D

D
A

B
C

E
A
C E B
C

Vertical type Horizontal type Floor type 208lt/h

AVAILABLE MODELS
TYPE DIMENSIONS (cm)
Electric Real Weight Electroboiler Heat Heat Continuous Heating
water Capacity with heat Exchanger Exchanger Flow Rate Time Weight Α Β C D E
heaters exchanger * Surface Power (80oC) (∆Τ 35oC-80oC) (∆Τ 45oC-80oC)
8lt 6,9lt 6kg - - - - - - 23 19 43 23 24
20lt 17,6lt 11kg - - - - - - 25 26 51 32 33
40lt 36,4lt 15kg - - - - - - 18 26 56 43 44
50lt 45,6lt 18kg - - - - - - 18 26 61 43 44
60lt 55,6lt 19kg 60lt 0,25m 2
9,3kW 228lt/h 11min 23lt 27 26 69 43 44
80lt 74,4lt 20kg 80lt 0,25m 2
9,3kW 228lt/h 17min 24lt 43 26 84 43 44
100lt 90,9lt 25kg 100lt 0,25m2 9,3kW 228lt/h 28min 29lt 58 26 99 43 44
120lt 107,9lt 30kg 120lt 0,25m2 9,3kW 228lt/h 36min 34lt 73 26 119 43 44
150lt 149,2lt 49kg 150lt 0,50m 2
14,8kW 363lt/h 38min 55lt 105 26 145 43 44
200lt 190,1lt 59kg 200lt 0,50m 2
14,8kW 363lt/h 45min 66lt 76 26 133 52 54

Upon request, we undertake the manufacturing of customized (in terms of product dimensions) electric water
heaters, maintaining the specifications of our standard product.
 Sarkis Bldg, Dbayeh, Lebanon
P.O. Box: 93 Ain Aar, Metn
Email: [email protected]
Tel : + 961 4 546 511
Fax : +961 4 546 512
Mob : + 961 70 236 271 | www.emslebanon.com