S50

S235
HOT DIP
ETA 10/0422

HIGHLY-RESISTANT POST BASE

MIGHTY
Characteristic compression strength of more than 300 kN. Ideal for large
columns.

RAISED
Outdistanced from the ground to avoid water splash and stagnation and
guarantee high durability. Concealed fastening on the timber element.

CERTIFIED SAFETY
Exceptional compression strength values calculated and certified ac-
cording to ETA.

CHARACTERISTICS
FOCUS exceptional compression strength
COLUMNS starting from 120 x 120 mm
HEIGHT 120 | 180 | 240 mm
FASTENERS HBS PLATE EVO, SKR, VIN-FIX PRO

MATERIAL
Hot dip bright zinc plated carbon steel.

FIELDS OF USE
Outdoor joints. Suitable for service class 1, 2
and 3
• solid timber and glulam
• CLT, LVL

420 | S50 | POST BASES AND JOINTS FOR TERRACES

 POINT-TO-POINT LOAD
Ideal for transferring high compression forces
deriving from large columns. Excellent dura-
bility of the column thanks to the tubular that
generates the riser.

LARGE SCALE STRUCTURES

Ideal for beam and column construction sys-
tems of large dimensions and large spans.

POST BASES AND JOINTS FOR TERRACES | S50 | 421

CODES AND DIMENSIONS
S50
CODE H P top top bottom lower rod pcs
plate holes plate holes ØxL
[mm] [mm] [mm] [n. x mm] [mm] [n. x mm] [mm]
S50120120 144 120 120 x 120 x 12 4 x Ø11 160 x 160 x 12 4 x Ø13 M20 x 120 1
P H
S50120180 204 180 120 x 120 x 12 4 x Ø11 160 x 160 x 12 4 x Ø13 M20 x 120 1
S50160180 212 180 160 x 160 x 16 4 x Ø11 200 x 200 x 16 4 x Ø13 M24 x 150 1
S50160240 272 240 160 x 160 x 16 4 x Ø11 200 x 200 x 16 4 x Ø13 M24 x 150 1

HBS PLATE EVO

COATING

CODE d1 L b TX pcs
d1
[mm] [mm] [mm]
L
HBSPEVO880 8 80 55 TX 40 100

MATERIAL AND DURABILITY EXTERNAL LOADS

S50: S235 carbon steel with hot galvanising.
To be used in service classes 1, 2 and 3 (EN 1995-1-1).
F1,c
Bs,min

FIELD OF USE
• Timber columns

ADDITIONAL PRODUCTS - FASTENING

type description d support page

[mm]
HBS PLATE EVO screw for timber 8 560
SKR screw anchor 12 488

AB1 - AB1 A4 metal anchor 12 488 - 496

VIN-FIX PRO chemical anchor M12 511

EPO-FIX PLUS chemical anchor M12 517

ASSEMBLY

1 2 3 4

422 | S50 | POST BASES AND JOINTS FOR TERRACES

 GEOMETRY
S50120120 S50160180
S50120180 S50160240

160
20 120 20
120 20 Ø11
150 M24
17 86 17
M20 Ø11
17
160 120
120 16
120 86

160 20
12 17

120 P
P Ø100
Ø80

12 16
200
160
20 160 20
17 126 17
Ø13 20 Ø13
17

160 126 Ø80

200 160 Ø100

17
20

STATIC VALUES
COMPRESSION STRENGTH

F1,c

Bs,min

CODE Bs,min R1,c k timber R1,c k steel

[mm] [kN] γ timber [kN] γsteel [kN] γsteel

S50120120 193,0 127,0 277,0
120 x 120
S50120180 193,0 127,0 277,0
γMT(1) γM0 γM1
S50160180 324,0 247,0 351,0
160 x 160
S50160240 324,0 247,0 351,0

NOTES:
(1)
y MT partial coefficient of the timber. The coefficients kmod and y should be taken according to the current regu-
lations used for the calculation.
The verification of the fastener-to-concrete connection must be carried
GENERAL PRINCIPLES: out separately.
• For the calculation process a timber density ρ k = 350 kg/m3 has been con-
• Characteristic values according to ETA-10/0422.
sidered.
• The design values are obtained from the characteristic values as follows:
• Dimensioning and verification of timber and concrete elements must be
carried out separately.
Ri,k timber kmod
Rd = min γtimber
Ri,k steel
γsteel

POST BASES AND JOINTS FOR TERRACES | S50 | 423

Powered by TCPDF (www.tcpdf.org)