Roll No. Total No.
of Pages: 02
Total No. of Questions: 09
B.Tech. (AE/AI&ML / CSE / DS / EE / ECE / EEE/F.T/IT/CE/ME/Robotics &
Artificial Intelligence/Automation & Robotics/Internet of Things and
Cyber Security including Block Chain Technology) (Sem.–1,2)
BASIC ELECTRICAL ENGINEERING
Subject Code: BTEE/101/18
M.Code : 75339
Date of Examination : 04-05-2024
Time : 3 Hrs. Max. Marks: 60
INSTRUCTIONS TO CANDIDATES :
1. SECTION- A is COMPULSORY consisting of TEN questions carrying TWO marks
each.
2. SECTION - B & C. have FOUR questions each.
3. Attempt any FIVE questions from SECTION B & C carrying EIGHT marks each.
4. Select atleast TWO questions from SECTION - B & C.
SECTION-A
1. Answer following questions in brief :
a) What is the difference between real and reactive power?
b) What is voltage regulation of a single-phase transformer?
c) What is the importance of power factor?
d) What are various components of LT switchgear?
e) Differentiate between the dependent and independent voltage-current sources.
f) Series RLC circuit is also called voltage circuit at resonance. Justify.
g) Derive an equation for rotor speed for an induction motor.
h) Enlist the types of batteries.
i) What is the difference between active and passive elements?
j) What are three-phase balanced circuits?
1 | M-75339 (S1)-1317
SECTION-B
2. In a particular RL series circuit a voltage of 10 V at 50 Hz produces a current of 700 mA
while the same voltage at 75 Hz produces 500 mA. What are the values of R and L in the
circuit?
3. State and explain the Norton's theorem. Give one example to prove this.
4. Explain the torque-speed curve of a three-phase induction motor. Hence, enlist its any
two applications.
5. Draw and explain the electric circuit of an earth leakage circuit breaker.
SECTION-C
6. Explain the types of wires and cables along with its applications in Electrical Systems.
7. Derive an equation for resonant frequency for a series RLC circuit at resonance.
8. Derive the voltage and current equations for a series RL circuit excited by an AC source.
9. A single-phase 50 Hz transformer has 30 primary and 350 secondary turns. The net cross-
sectional area of the core is 250 cm2. If the primary winding is connected to a 230 V, 50
Hz supply, calculate :
a) peak value of flux density in the core
b) voltage induced in the secondary winding. Neglect losses, what is the primary current
when the secondary current is 100 A?
NOTE : Disclosure of identity by writing mobile number or making passing request on any
page of Answer sheet will lead to UMC against the Student.
2 | M-75339 (S1)-1317
