Scribd
Upload
16 views3 pages

Assignment 2 QP - 23eer102 Eca - 2024-24 - I Ec, Ee, Ee (Vlsi)

Uploaded by

maduraimaniv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views3 pages

Assignment 2 QP - 23eer102 Eca - 2024-24 - I Ec, Ee, Ee (Vlsi)

Uploaded by

maduraimaniv
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Department of Electronics and

Communication Engineering

Assignment- II

Year/Semester/Section: I / I / A/ B/ C Academic Year: 2024-2025

Branch: EC,EE,EE(VLSI) Maximum Marks: 100


Course Code & Title: 23EER102 & ELECTRIC CIRCUITS ANALYSIS
Date of Issue: 19.12.2024 Date of Submission: 27.12.2024

Questions CO/k
Q.No Marks
level
1. For a balanced three phase star connected system with V RY =400 V∟0° ,VYB CO5 / K3 14
=400 V∟-120° and VBR =400V∟-240° . The impedance per phase is (10+j24)
Ω. Find the following.
a) All line currents
b) Power factor
c) Real Power
d) Reactive Power
e) Apparent Power
2. Three identical coils each having a resistance of 20 Ωand a reactance of 20 Ω CO5 / K3 12
are connected in i) Star ii) Delta across 440 V, 3 phase supply. Calculate for
each case, line current and reading in each of the wattmeters connected to
measure power.
3. Derive an expression for the current response of an RLC series circuit with CO3 / K2 14
sinusoidal excitation. Assume that the circuit is working in critical damping
condition.
4. In a RL circuit with time constant of 1.25 s, inductor current increases from the CO3 / K3 12
initial value of zero to the final value of 1.2 A.
a) Calculate the inductor current at time 0.4 s, 0.8 s and 2 s.
b) Find the time at which the inductor current reaches 0.3 A and 0.9 A
5. Each of the two wattmeters connected to measure the input to a 3-phase CO5 / K3 12
induction motor reads 10 kW. If the power factor of the motor be changed to
0.866 lagging, determine
a) Readings of the two wattmeters, and
b) Total input power remaining unchanged
6. A series R – L – C circuit consists of R = 1000 Ω, L = 100 mH and C = 10 CO3 / K3 12
µF.The applied voltage across the circuit is 100 V.
a) Find the resonant frequency of the circuit.
b) Find the quality factor of the circuit at the resonant frequency.
c) At what angular frequencies do the half power points occur?
d) Calculate the bandwidth of the circuit.
Department of Electronics and
Communication Engineering
7. What is the bandwidth of each circuit in Figure shown below. CO4 / K3 12

8. Find the total inductance of the circuit shown in Figure. CO4 / K3 12


L1 = 20 H & M12 = 4 H
L2 = 10 H & M23 = 4 H
L3 = 8 H & M13 = 2 H

Course In-charge Course Coordinator HoD


Department of Electronics and
Communication Engineering

ACADEMIC YEAR: 2024-25

Name & Register No of the Candidate:


Course Code & Title:23EER102 ELECTRIC CIRCUITS ANALYSIS
Date of Issue: 19.12.2024 Date of Submission:
Year/Dept./Sem/Section:
Assignment: II

Reference(s):

Marks Details
Total
Q. No 1 2 3 4 5
(100)
COs
Marks
Obtained

Course In-charge

You might also like