machine lab 2
machine lab 2
Registration No 19Abelt0829
19Abelt0831
19Abelt0838
19Abelt0845
Lab No 05
Date 24-12-2021
Report Verification:
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
Experiment # 14
3-Phase star to delta connected
Transformer
Objective:
To learn how to use 3 single phase transformers as star to delta connected 3 phase transformer.
Apparatus:
Transformer single phase (3).
Connecting Leads as required
Procedure:
Make the connections as shown in the figure.
Connect the primary side in star connection as shown in the figure.
Connect also secondary side in delta connection.
Check the line and phase voltages.
Precautions:
Connections should be tight.
Switch off the main while connecting the connection wires.
While checking the line and phase voltage the voltmeter should be used within the range
of voltage.
Make the connections very carefully.
Circuit Diagram:
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
Formula:
Primary and secondary line voltages relation is given by;
n
Vl= Vl
√3
Here n = NS/Np
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
To Measure:
Va 220V
Vb 220V
Vc 220V
Vab 364V
Vbc 372V
Vca 371V
Vab 102.6V
Vbc 101V
Vca 103V
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
Conclusion:
In this lab we learned how to connect 3 single phase transformers as a star to delta 3 phase transformer
using the connecting leads and measuring its line as phase voltages using a Multimeter.
Group#02