Equipment for heating systems Safety equipment
Automatic quick air vents PrimoVent
Air in the system is a frequent cause of malfunctions of heating, cooling and solar systems. The cause of "air in the system" should be
able to removed. However, there are no systems that are always 100 % tight. The AFRISO PrimoVent product family continuously and
automatically removes air from heating and solar systems, thus helping to avoid corrosion caused by air and inclusion of air in sys-
tems. AFRISO quick air vents are available as brass, plastic or hybrid versions and are always subjected to a 100 % function test prior
to shipment.
Universal application for water and water-glycol mixtures (max. 50 % glycol)
Integrated aqua stop for reliable oper-
ation without water leakage. The pro-
tective cap does not need to be
removed even during initial filling or
maintenance.
Protective cap for vent, cannot be lost.
Cover with patented nozzle
7 geometry: The slot-shaped vent
opening provides for a high
venting capacity.
Slim design for low heat
loss – ideal for installations
where space is limited.
Multifunctional lever for depend-
able opening and closing of the
valve – directly connected to the
float so that disconnection is not
possible.
Two-way venting principle: sepa-
rated air escapes via the central
hole in the float in a defined way
without taking along water.
Optimised float geometry for mini-
mum capillary effect – avoids the
formation of an air cushion to sup- i
press undefined "jumps" of the float. Mounting valves for quick air vents
Depending on the version: ensure easy, fast installation.
Brass or plastic connection, Dismounting is possible at any time
G3/8 or G½ with O ring seal. without draining the system.
G 3/8 G 3/8
R/
38
R1/2
192 www.afriso.com
