KSC5027

KSC5027

High Voltage and High Reliability

• High Speed Switching
• Wide SOA

1 TO-220

1.Base 2.Collector 3.Emitter

NPN Silicon Transistor

Absolute Maximum Ratings TC=25°C unless otherwise noted
Symbol Parameter Value Units
VCBO Collector-Base Voltage 1100 V
VCEO Collector-Emitter Voltage 800 V
VEBO Emitter-Base Voltage 7 V
IC Collector Current (DC) 3 A
ICP Collector Current (Pulse) 10 A
IB Base Current 1.5 A
PC Collector Dissipation ( TC=25°C) 50 W
TJ Junction Temperature 150 °C
TSTG Storage Temperature - 55 ~ 150 °C

Electrical Characteristics TC=25°C unless otherwise noted

Symbol Parameter Test Condition Min. Typ. Max. Units
BVCBO Collector-Base Breakdown Voltage IC = 1mA, IE = 0 1100 V
BVCEO Collector-Emitter Breakdown Voltage IC = 5mA, IB = 0 800 V
BVEBO Emitter-Base Breakdown Voltage IE = 1mA, IC = 0 7 V
VCEX(sus) Collector-Emitter Sustaining Voltage IC = 1.5A, IB1 = -IB2 = 0.3A 800 V
L = 2mH, Clamped
ICBO Collector Cut-off Current VCB = 800V, IE = 0 10 µA
IEBO Emitter Cut-off Current VEB = 5V, IC = 0 10 µA
hFE1 DC Current Gain VCE = 5V, IC = 0.2A 10 40
hFE2 VCE = 5V, IC = 1A 8
VCE(sat) Collector-Emitter Saturation Voltage IC = 1.5A, IB = 0.3A 2 V
VBE(sat) Base-Emitter Saturation Voltage IC = 1.5A, IB = 0.3A 1.5 V
Cob Output Capacitance VCB = 10V, IE = 0, f = 1MHz 60 pF
fT Current Gain Bandwidth Product VCE = 10V, IC = 0.2A 15 MHz
tON Turn ON Time VCC = 400V 0.5 µs
tSTG Storage Time IC = 5IB1 = -2.5IB2 = 2A 3 µs
RL = 200Ω
tF Fall Time 0.3 µs

hFE Classification
Classification N R O
hFE1 10 ~ 20 15 ~ 30 20 ~ 40

©2001 Fairchild Semiconductor Corporation Rev. A1, June 2001

 KSC5027
Typical Characteristics

4.0 1000
VCE = 5V
3.6
IC[A], COLLECTOR CURRENT

3.2

hFE, DC CURRENT GAIN

2.8
100
2.4
IB = 250mA
2.0 IB = 200mA
IB = 150mA
1.6
IB = 100mA
IB = 80mA 10
1.2 IB = 60mA
IB = 50mA
0.8
IB = 40mA
IB = 30mA
IB = 20mA
0.4
IB = 10mA
IB = 0
0.0 1
0 1 2 3 4 5 6 7 8 9 10 0.01 0.1 1 10

VCE[V], COLLECTOR-EMITTER VOLTAGE IC[A], COLLECTOR CURRENT

Figure 1. Static Characteristic Figure 2. DC current Gain

VBE(sat), VCE(sat)[V], SATURATION VOLTAGE

10 4.0
IC = 5 IB VCE = 5V
3.5
IC[A], COLLECTOR CURRENT

3.0

1 V BE(sat)
2.5

2.0

1.5
0.1 V CE(sat)

1.0

0.5

0.01 0.0
0.01 0.1 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2

IC[A], COLLECTOR CURRENT VBE[V], BASE-EMITTER VOLTAGE

Figure 3. Base-Emitter Saturation Voltage Figure 4. Base-Emitter On Voltage

Collector-Emitter Saturation Voltage

10 100

VCC = 400V
tSTG 5.IB1 = -2.5.IB2 = IC
ICMAX.(Pulse)
10
IC[A], COLLECTOR CURRENT

ICMAX(Continuous)
tON, tSTG, tF [µ s], TIME

10

10
m

1
1m

0µ
s

DC
s

tON 1

tF
0.1
0.1

0.01

0.01 1E-3
0.1 1 10 1 10 100 1000 10000

IC[A], COLLECTOR CURRENT VCE[V], COLLECTOR-EMITTER VOLTAGE

Figure 5. Switching Time Figure 6. Safe Operating Area

©2001 Fairchild Semiconductor Corporation Rev. A1, June 2001

 KSC5027
Typical Characteristics (Continued)

100 80
IB2 = -0.3A
70
IC[A], COLLECTOR CURRENT

PC[W], POWER DISSIPATION

10 60

50

1 40

30

0.1 20

10

0.01 0
10 100 1000 10000 0 25 50 75 100 125 150 175

o
VCE[V], COLLECTOR-EMITTER VOLTAGE TC[ C], CASE TEMPERATURE

Figure 7. Reverse Bias Operating Area Figure 8. Power Derating

©2001 Fairchild Semiconductor Corporation Rev. A1, June 2001

 SUPPLIER "B" PACKAGE
SHAPE
3.50
10.67
SUPPLIER "A" PACKAGE 9.65 E
SHAPE

3.40
2.50

16.30
IF PRESENT, SEE NOTE "D" 13.90
E
16.51 9.40
15.42 8.13 E

1 2 3 4.10
[2.46]
C 2.70

14.04
2.13 12.70

2.06

FRONT VIEWS

4.70 1.62 H 1.62

4.00 1.42 2.67 1.10
2.40
"A1" 8.65 1.00
SEE NOTE "F" 7.59 0.55

OPTIONAL 6.69
6.06
CHAMFER
E
14.30
11.50

NOTE "I" BOTTOM VIEW

NOTES:
A) REFERENCE JEDEC, TO-220, VARIATION AB
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS COMMON TO ALL PACKAGE
SUPPLIERS EXCEPT WHERE NOTED [ ].
3 2 1 D) LOCATION OF MOLDED FEATURE MAY VARY
(LOWER LEFT CORNER, LOWER CENTER
AND CENTER OF THE PACKAGE)
E DOES NOT COMPLY JEDEC STANDARD VALUE.
F) "A1" DIMENSIONS AS BELOW:
SINGLE GAUGE = 0.51 - 0.61
DUAL GAUGE = 1.10 - 1.45
G) DRAWING FILE NAME: TO220B03REV9
H PRESENCE IS SUPPLIER DEPENDENT
I) SUPPLIER DEPENDENT MOLD LOCKING HOLES
IN HEATSINK.

0.60
0.36 2.85 BACK VIEW
2.10
SIDE VIEW
 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local
Email: [email protected] Phone: 81−3−5817−1050 Sales Representative

© Semiconductor Components Industries, LLC www.onsemi.com www.onsemi.com

1