SMART Transmitter Power Supply

KFD2-STC5-1
< 1-channel signal conditioner
< 24 V DC supply (Power Rail)
< Input 2-wire and 3-wire SMART transmitters and 2-wire SMART
current sources
< Output 4 mA ... 20 mA current sink/current source
< Terminals with test points
< Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Function
This signal conditioner provides the galvanic isolation between field circuits and control circuits.
The device supplies 2-wire and 3-wire SMART transmitters, and can also be used with 2-wire SMART current sources.
It transfers the analog input signal as an isolated current value.
Digital signals may be superimposed on the input signal on the field side or on the control side and are transferred bi-directionally.
The device provides a sink mode or a source mode output on the control side terminals.
The device has an internal resistor. Use this resistor if the HART communication resistance in the control circuit is too low.
Test sockets for the connection of HART communicators are integrated into the terminals of the device.

Application
The device supports the following SMART protocols:
l HART

l BRAIN

l Foxboro

Connection

KFD2-STC5-1

+ -
1+ 7
HART

2-
HART

mA -V +
3 8
9
250 Ω
Release date: 2023-06-05 Date of issue: 2023-06-05 Filename: 239209_eng.pdf

14+
15-
24 V DC

24 V DC
Power Rail

Technical Data
General specifications
Signal type Analog input
Functional safety related parameters
Safety Integrity Level (SIL) SIL 2
Systematic capability (SC) SC 3

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 1
 SMART Transmitter Power Supply KFD2-STC5-1
Technical Data
Supply
Connection Power Rail or terminals 14+, 15-
Rated voltage Ur 18 ... 30 V DC
Ripple within the supply tolerance
Power dissipation ≤ 1 W at maximum load
Power consumption ≤ 1.6 W at maximum load
Input
Connection side field side
Connection terminals 1+, 2-, 3
Input signal 4 ... 20 mA
Open circuit voltage/short-circuit current terminals 1+, 3: 23 V / 25 mA
Input resistance max. 265 Ω terminals 2-, 3 , max. 330 Ω terminals 1+, 3
Available voltage ≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3
Output
Connection side control side
Connection terminals 7+, 8-, 9- (sink)
terminals 7-, 8+, 9+ (source)
see additional information
Load 0 ... 800 Ω
Output signal 4 ... 20 mA (overload > 25 mA)
Ripple max. 50 µA eff
External supply (loop) 2 ... 30 V DC
If the external voltage is > 19 V, a load ≥ ((V - 19) / 0.02) Ω is required. V represents
the value of the external voltage.
The internal 250 Ω resistor at terminal 9 can be used as a load.
Transfer characteristics
Deviation at 20 °C (68 °F), 4 ... 20 mA
≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
Influence of ambient temperature ≤ 0.25 µA/K
Frequency range input to output: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB)
output to input: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB)
Settling time 200 µs
Rise time/fall time 100 µs
Galvanic isolation
Input/Output basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff
Input/power supply basic insulation according to IEC 61010-1, rated insulation voltage 300 Veff
Output/power supply functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements LED
Labeling space for labeling at the front
Release date: 2023-06-05 Date of issue: 2023-06-05 Filename: 239209_eng.pdf

Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility NE 21:2012
EN 61326-3-2:2008
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1:2012
Ambient conditions
Ambient temperature -20 ... 70 °C (-4 ... 158 °F)
Mechanical specifications
Degree of protection IP20
Connection screw terminals
Mass approx. 200 g
Dimensions 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 2
 SMART Transmitter Power Supply KFD2-STC5-1
Technical Data
General information
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals
where applicable. For information see www.pepperl-fuchs.com.

Assembly

Front view
Removable terminal
green

1 2 3
4 5 6

KFD2-STC5-1

PWR
LED green:
Power supply

7 8 9
10 11 12
13 14 15

Removable terminals
green

Matching System Components

KFD2-EB2 Power Feed Module

UPR-03 Universal Power Rail with end caps and cover, 3 conductors, length: 2 m

UPR-03-M Universal Power Rail with end caps and cover, 3 conductors, length: 1,6 m
Release date: 2023-06-05 Date of issue: 2023-06-05 Filename: 239209_eng.pdf

UPR-03-S Universal Power Rail with end caps and cover, 3 conductors, length: 0.8 m

K-DUCT-GY Profile rail, wiring comb field side, gray

K-DUCT-GY-UPR-03 Profile rail with UPR-03-* insert, 3 conductors, wiring comb field side, gray

Accessories
K-250R Measuring resistor

K-500R0%1 Measuring resistor

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 3
 SMART Transmitter Power Supply KFD2-STC5-1
Accessories
KF-ST-5GN Terminal block for KF modules, 3-pin screw terminal, green

KF-STP-5GN Terminal block for KF modules, 3-pin screw terminal, with test sockets, green

KF-CP Red coding pins, packaging unit: 20 x 6

Release date: 2023-06-05 Date of issue: 2023-06-05 Filename: 239209_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 4
 SMART Transmitter Power Supply KFD2-STC5-1

Connection
The device provides an output on the control side terminals. This output can be operated in the current sink operating mode or
current source operating mode. Please refer to the following diagram for connection.

Sink mode Source mode

output output

+ -
7

HART
-V +
8
9
250 Ω
Release date: 2023-06-05 Date of issue: 2023-06-05 Filename: 239209_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

5
Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected]