® STPS40150CG/CT/CW

HIGH VOLTAGE POWER SCHOTTKY RECTIFIER

MAJOR PRODUCTS CHARACTERISTICS A1

K
IF(AV) 2 x 20 A
A2
VRRM 150 V
Tj (max) 175°C
VF (max) 0.75 V

FEATURES AND BENEFITS A2

A2
HIGH JUNCTION TEMPERATURE CAPABILITY K
■ K
A1 A1
■ LOW LEAKAGE CURRENT TO-220AB TO-247
■ GOOD TRADE OFF BETWEEN LEAKAGE STPS40150CT STPS40150CW
CURRENT AND FORWARD VOLTAGE DROP
■ LOW THERMAL RESISTANCE K

■ HIGH FREQUENCY OPERATION

DESCRIPTION A2
A1
Dual center tap Schottky rectifiers suited for high D2PAK
frequency switch mode power supply. STPS40150CG
Packaged in TO-247, TO-220AB and D2PAK, this
devices is intended for use to enhance the
reliability of the application.

ABSOLUTE RATINGS (limiting values, per diode)

Symbol Parameter Value Unit

VRRM Repetitive peak reverse voltage 150 V
IF(RMS) RMS forward current 60 A
IF(AV) Average forward current Tc = 150°C Per diode 20 A
δ = 0.5 Per device 40
IFSM Surge non repetitive forward current tp = 10 ms Sinusoidal 250 A
PARM Repetitive peak avalanche power tp = 1µs Tj = 25°C 14100 W
Tstg Storage temperature range - 65 to + 175 °C
Tj Maximum operating junction temperature * 175 °C
dV/dt Critical rate of rise of reverse voltage 10000 V/µs

dPtot 1
* : < thermal runaway condition for a diode on its own heatsink
dTj Rth( j − a )

October 2003 - Ed: 1A 1/6

STPS40150CT/CW/CG

THERMAL RESISTANCES

Symbol Parameter Value Unit

Rth(j-c) 2 Per diode 1.2 °C/W
Junction to case TO-220AB / D PAK
Total 0.85
Rth(j-c) Junction to case TO-247 Per diode 1.2 °C/W
Total 0.85
Rth(c) Coupling 0.5 °C/W

When the diodes 1 and 2 are used simultaneously :

∆ Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c)

STATIC ELECTRICAL CHARACTERISTICS (per diode)

Symbol Parameter Tests Conditions Min. Typ. Max. Unit

IR * Reverse leakage Tj = 25°C VR = VRRM 2 8 µA
current Tj = 125°C 2 11 mA
VF * Forward voltage drop Tj = 25°C IF = 20 A 0.92 V
Tj = 125°C IF = 20 A 0.69 0.75
Tj = 25°C IF = 40 A 1.00
Tj = 125°C IF = 40 A 0.79 0.86
Pulse test : * tp = 380 µs, δ < 2%

To evaluate the conduction losses use the following equation :

2
P = 0.64 x IF(AV) + 0.0055 IF (RMS)

Fig. 1: Conduction losses versus average current Fig. 2: Normalized avalanche power derating
(per diode). versus pulse duration.

PF(AV)(W)
22
PARM(tp)
δ = 0.1 δ = 0.2 δ = 0.5 PARM(1µs)
20 1
18 δ = 0.05
16
δ=1
14 0.1
12

10

8
0.01
6
T
4

2
IF(AV)(A) tp(µs)
δ=tp/T tp 0.001
0
0.01 0.1 1 10 100 1000
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28

2/6
 STPS40150CT/CW/CG

Fig. 3: Normalized avalanche power derating Fig. 4: Average forward current versus ambient
versus junction temperature. temperature (δ=0.5, per diode).

IF(AV)(A)
PARM(tp) 22
PARM(25°C) Rth(j-a)=Rth(j-c)
1.2 20

18
1
16

14
0.8
12
Rth(j-a)=15°C/W
0.6 10

8
0.4
6
T
0.2 4
Tj(°C) 2
0 δ=tp/T tp Tamb(°C)
0
25 50 75 100 125 150
0 25 50 75 100 125 150 175

Fig. 5: Non repetitive surge peak forward current Fig. 6: Relative variation of thermal impedance
versus overload duration (maximum values, per junction to case versus pulse duration.
diode).

IM(A) Zth(j-c)/Rth(j-c)
250 1.0

0.9

200 0.8

0.7
Tc=50°C δ = 0.5
150 0.6

0.5
Tc=75°C

100 0.4 δ = 0.2

0.3 δ = 0.1
Tc=125°C T
IM
50 0.2
t
Single pulse
δ=0.5 t(s) 0.1
tp(s) δ=tp/T tp
0 0.0
1.E-03 1.E-02 1.E-01 1.E+00 1.E-03 1.E-02 1.E-01 1.E+00

Fig. 7: Reverse leakage current versus reverse Fig. 8: Junction capacitance versus reverse
voltage applied (typical values, per diode). voltage applied (typical values, per diode).

IR(µA) C(pF)
1.E+05 1000
F=1MHz
VOSC=30mVRMS
1.E+04 Tj=150°C Tj=25°C

1.E+03 Tj=125°C

Tj=100°C
1.E+02 100
Tj=75°C

1.E+01
Tj=50°C

1.E+00
Tj=25°C
VR(V)
VR(V)
1.E-01 10
10 30 50 70 90 110 130 150 1 10 100 1000

3/6
STPS40150CT/CW/CG

Fig. 9: Forward voltage drop versus forward Fig. 10: Thermal resistance junction to ambient
current (per diode). versus copper surface under tab (epoxy printed
board FR4, Cu=35µm) (D2PAK).
IFM(A) Rth(j-a)(°C/W)
100.0 80

Tj=125°C
(maximum values)
70

60
10.0 Tj=125°C
(typical values) 50

40
Tj=25°C
(maximum values)
30
1.0
20

10
VFM(V) S(cm²)
0.1 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0 5 10 15 20 25 30 35 40

PACKAGE MECHANICAL DATA

TO-220AB

DIMENSIONS
REF. Millimeters Inches
Min. Max. Min. Max.
H2 A
A 4.40 4.60 0.173 0.181
Dia C
C 1.23 1.32 0.048 0.051
L5 D 2.40 2.72 0.094 0.107
L7
E 0.49 0.70 0.019 0.027
L6 F 0.61 0.88 0.024 0.034
F1 1.14 1.70 0.044 0.066
L2
F2 F2 1.14 1.70 0.044 0.066
D G 4.95 5.15 0.194 0.202
F1 L9
G1 2.40 2.70 0.094 0.106
L4 H2 10 10.40 0.393 0.409
F L2 16.4 typ. 0.645 typ.
M
L4 13 14 0.511 0.551
G1 E L5 2.65 2.95 0.104 0.116
G L6 15.25 15.75 0.600 0.620
L7 6.20 6.60 0.244 0.259
L9 3.50 3.93 0.137 0.154
M 2.6 typ. 0.102 typ.
Diam. 3.75 3.85 0.147 0.151

■ Cooling method : C
■ Recommended torque value : 0.55 m.N
■ Maximum torque value : 0.70 m.N

4/6
 STPS40150CT/CW/CG

PACKAGE MECHANICAL DATA

D2PAK

REF. DIMENSIONS
Millimeters Inches
A Min. Max. Min. Max.
E A 4.40 4.60 0.173 0.181
C2
L2 A1 2.49 2.69 0.098 0.106
A2 0.03 0.23 0.001 0.009
D B 0.70 0.93 0.027 0.037
L B2 1.14 1.70 0.045 0.067
L3 C 0.45 0.60 0.017 0.024
A1 C2 1.23 1.36 0.048 0.054
B2 C R D 8.95 9.35 0.352 0.368
B
E 10.00 10.40 0.393 0.409
G G 4.88 5.28 0.192 0.208
L 15.00 15.85 0.590 0.624
A2
L2 1.27 1.40 0.050 0.055
L3 1.40 1.75 0.055 0.069
M
* V2 M 2.40 3.20 0.094 0.126
R 0.40 typ. 0.016 typ.
* FLAT ZONE NO LESS THAN 2mm
V2 0° 8° 0° 8°

FOOT PRINT DIMENSIONS (in millimeters)

16.90

10.30 5.08

1.30

3.70
8.90

5/6
STPS40150CT/CW/CG
PACKAGE MECHANICAL DATA
TO-247

DIMENSIONS
V REF. Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
V Dia. A 4.85 5.15 0.191 0.203
D 2.20 2.60 0.086 0.102
E 0.40 0.80 0.015 0.031
F 1.00 1.40 0.039 0.055
A
H F1 3.00 0.118
F2 2.00 0.078
F3 2.00 2.40 0.078 0.094
L5 F4 3.00 3.40 0.118 0.133
G 10.90 0.429
L H 15.45 15.75 0.608 0.620
L2 L4 L 19.85 20.15 0.781 0.793
L1 3.70 4.30 0.145 0.169
F1 F2 L1 L2 18.50 0.728
L3 14.20 14.80 0.559 0.582
F3
D L4 34.60 1.362
V2 L3
F4
L5 5.50 0.216
F(x3) M 2.00 3.00 0.078 0.118
G
M E V 5° 5°
= = V2 60° 60°
Dia. 3.55 3.65 0.139 0.143

■ Cooling method : C
■ Recommended torque value : 0.8m.N
■ Maximum torque value : 1.0m.N

Ordering type Marking Package Weight Base qty Delivery mode

STPS40150CT STPS40150CT TO-220AB 2g 50 Tube
STPS40150CW STPS40150CW TO-247 4.4g 30 Tube
2
STPS40150CG STPS40150CG D PAK 1.48g 50 Tube
2
STPS40150CG-TR STPS40150CG-TR D PAK 1.48g 1000 Tape & reel
■ Epoxy meets UL94,V0

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not au-
thorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners.
© 2003 STMicroelectronics - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany -
Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain -
Sweden - Switzerland - United Kingdom - United States
www.st.com

6/6