FS1ME

SURFACE MOUNT REVERSE VOLTAGE – 1000 Volts

GLASS PASSIVATED RECTIFIER FORWARD CURRENT –1.0 Ampere

FEATURES F1-A
• For surface mounted applications.
• Low reverse leakage current
• Low forward voltage drop F1-A
• High current capability DIM. MIN. TYP. MAX.
A 3.50 3.80 3.90

MECHANICAL DATA B 1.70 1.90 2.00

• Case: JEDEC DO-219AA C 0.81 1.18 1.20
• Case Material: “Green” molding compound, UL D 2.70 2.80 2.90
flammability classification 94V-0, (No Br. Sb. Cl.)
E 0.80 1.00 1.35
“Halogen-free”
• Terminals: Lead Free Plating (Matte Tin Finish.) F 0.05 0.15 0.30
• Component in accordance to RoHs 2002/95/EC G 0.35 0.60 0.85
• Marking code: S1M H 0.03 0.07 0.10
• Weight: 16.3 mg (Approximate)
I 0° 5° 8°
All dimension in millimeter

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

ABSOLUTE RATINGS
PARAMETER SYMBOL VALUE UNIT
Maximum repetitive peak reverse voltage VRRM 1000 V
Average rectified output current TC =100°C I(AV) 1.0 A
Peak forward surge current 8.3ms single half sine-wave superimposed
IFSM 30 A
on rated load.
2 2
I t rating for fusing (t = 8.3ms) I t 3.74 A2S
Operating junction temperature range TJ -55 to +150 °C
Storage temperature range TSTG -55 to +150 °C

STATIC ELECTRICAL CHARACTERISTICS

PARAMETER TEST CONDITIONS SYMBOL TYP. MAX UNIT
TJ =25°C -- 1.1
Forward voltage IF = 1A VF V
TJ =125°C 0.86 --
TJ =25°C -- 5.0
Leakage current VR = 1000V IR uA
TJ =125°C -- 500
Typical junction capacitance (Note 1) CJ 7.6 pF

THERMAL CHARACTERISTICS
THERMAL CHARACTERISTIC SYMBOL TYP. UNIT
RthJC 53
Typical thermal resistance (Note 2) RthJL 45 °C/W
RthJA 152
DYNAMIC ELECTRICAL CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. MAX UNIT
Reverse recovery time IF= 0.5A, Irr= 0.25A, IR =1.0A TJ=25°C TRR 1000 1600 nS

Note : REV.3 Mar.-2017, KSAP01

(1) Measured at 1.0MHz and applied voltage of 4.0VDC.
(2) Thermal resistance test performed in accordance with JESD-51. Unit mounted on glass-epoxy substrate
2
with 1oz/ft _3 mm x 3 mm copper pad per pin.
RATING AND CHARACTERISTIC CURVES
FS1ME
FIG.1- FORWARD CURRENT DERATING CURVE FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT
1.25 35

PEAK FORWARD SURGE CURRENT, (A)

AVERAGE FORWARD CURRENT, (A)

30
1

25

0.75
20

15
0.5

10

0.25
5
8.3ms single half sine-wave

0 0
0 25 50 75 100 125 150 1 10 100

CASE TEMPERATURE, (°C) NUMBER OF CYCLES AT 60Hz

FIG.3- TYPICAL FORWORD CHARACTERISTICS FIG.4- TYPICAL JUNCTION CAPACITANCE

10 100
INSTANTANEOUS FORWARD CURRENT, (A)

TJ=125°C
CAPACITANCE, (pF)

TJ=25°C
1 10

TJ=25°C, f=1MHz, level=1V

0.1 1
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 1 10 100
INSTANTANEOUS FORWARD VOLTAGE, (V) REVERSE VOLTAGE, (V)

FIG.5- TYPICAL REVERSE CHARACTERISTICS

100

TJ=125°C
INSTANTANEOUS REVERSE CURRENT, (uA)

10

TJ=100°C

0.1

TJ=25°C

0.01
0 20 40 60 80 100 120

PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)

LEGAL DISCLAIMER NOTICE

Important Notice and Disclaimer

LSC reserves the right to make changes to this document and its products and specifications
at any time without notice. Customers should obtain and confirm the latest product information
and specifications before final design, purchase or use.

LSC makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does LSC assume any liability for application assistance or
customer product design. LSC does not warrant or accept any liability with products which are
purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of LSC.

LSC products are not authorized for use as critical components in life support devices or
systems without express written approval of LSC.