DIN US
DIN
US
ALLROUNDER CUBE 1800
Distance between tie bars: 570 x 570 mm
Clamping force: 1800 kN
Injection unit: 400, 800, 1300 – horizontal
70, 170, 290, 400, 800 – moving
US
DIN
DIN US
US DIN
DIN
US
TECHNICAL DATA | CUBE 1800
EN-GB 1800 CUBE
Clamping unit 1800 CUBE
with clamping force max. kN 1800
Opening force | stroke max. kN | mm --- | 450
Mould height, fixed | variable min. mm --- | 1050-1450
Platen daylight fixed | variable max. mm --- | 1500-1900
Distance between tie bars (w x h) mm 570 x 570
Mould mounting platens (w x h) max. mm 795 x 795
Ejector force | stroke max. kN | mm 60 | 200
Dry cycle time EUROMAP ² min. s - mm 1,4 - 399
Injection unit ¹ 70 170 290
with screw diameter mm 18 22 25 25 30 35 30 35 40
Effective screw length L/D 24,5 20 17,5 24 20 17 23,3 20 17,5
Screw stroke max. mm 90 120 150
Calculated stroke volume max. cm³ 23 34 44 59 85 115 106 144 188
Shot weight max. g PS 21 31 40 54 77 105 97 132 172
Material throughput max. kg/h PS 4,1 5,5 6,5 10 13,5 16 17 20,5 24,5
max. kg/h PA6.6 2,1 2,8 3,3 5 7 8 8,5 10,5 12,5
Injection pressure max. bar 2500 2000 1550 2500 2000 1470 2500 2000 1530
Holding pressure max. bar 2500 2000 1550 2500 2000 1470 2500 2000 1530
Injection flow ² max. cm³/s 140 209 270 221 318 433 318 433 565
Screw circumferential speed ² max. m/min 49 60 68 50 60 70 51 60 69
Screw torque max. Nm 90 110 120 210 250 290 320 380 430
Nozzle contact force | retraction stroke max. kN | mm 50 | 150 50 | 210 60 | 240
Heating capacity | zones kW 4,1 | 4 9,4 | 5 6,4 | 5
Drive and connection
with horizontal/moving injection unit -
Net weight of machine kg -
Sound press. level | Insecurity ⁴ dB(A) 67 | 3
Oil filling l -
Dimensions l mm -
b mm -
h mm -
Cooling water connection max. °C 30
min. Δp bar 1,5 | DN 25
Upon request: other machine types and mould installation heights, screws, drive powers, etc.
All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and
material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be
mutually exclusive.
1) Size of injection unit = max. stroke volume (cm³) x max. injection pressure (kbar)
2) Specifications depend on the drive variant / drive configuration.
3) Specifications relate to 400 V/50 Hz.
4) Detailed info in the operating instr.
[] Specifications apply to alternative equipment.
Available injection units
Position Size
70 170 290 400 800 1300 2100 3200 4600
horizontal
moving vertikal
horizontal
2
US
DIN
US DIN
DIN US
DIN
US
TECHNICAL DATA | CUBE 1800
EN-GB 1800 CUBE
Clamping unit 1800 CUBE
with clamping force max. kN 1800
Opening force | stroke max. kN | mm --- | 450
Mould height, fixed | variable min. mm --- | 1050-1450
Platen daylight fixed | variable max. mm --- | 1500-1900
Distance between tie bars (w x h) mm 570 x 570
Mould mounting platens (w x h) max. mm 795 x 795
Ejector force | stroke max. kN | mm 60 | 200
Dry cycle time EUROMAP ² min. s - mm 1,4 - 399
Injection unit ¹ 400 800 1300
with screw diameter mm 35 40 45 45 50 55 55 60 70
Effective screw length L/D 23 20 18 22 20 18 22 20 17
Screw stroke max. mm 160 200 240
Calculated stroke volume max. cm³ 154 201 254 318 392 474 570 678 923
Shot weight max. g PS 141 184 232 291 359 434 521 620 844
Material throughput max. kg/h PS 25 29 35 46 53 59 86 96 115
max. kg/h PA6.6 12,5 15 17,5 23 27 30 43 48 58
Injection pressure max. bar 2500 2000 1580 2470 2000 1650 2380 2000 1470
Holding pressure max. bar 2500 2000 1580 2470 2000 1650 2380 2000 1470
Injection flow ² max. cm³/s 492 642 814 530 656 792 714 848 1156
Screw circumferential speed ² max. m/min 47 54 61 54 60 66 55 60 70
Screw torque max. Nm 480 550 610 900 1000 1100 1510 1640 1920
Nozzle contact force | retraction stroke max. kN | mm 60 | 300 70 | 300 90 | 550
Heating capacity | zones kW 9,4 | 5 19,9 | 8 22,9 | 8
Drive and connection
with horizontal/moving injection unit -
Net weight of machine kg -
Sound press. level | Insecurity ⁴ dB(A) 67 | 3
Oil filling l -
Dimensions l mm -
b mm -
h mm -
Cooling water connection max. °C 30
min. Δp bar 1,5 | DN 25
Upon request: other machine types and mould installation heights, screws, drive powers, etc.
All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and
material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be
mutually exclusive.
1) Size of injection unit = max. stroke volume (cm³) x max. injection pressure (kbar)
2) Specifications depend on the drive variant / drive configuration.
3) Specifications relate to 400 V/50 Hz.
4) Detailed info in the operating instr.
[] Specifications apply to alternative equipment.
Available injection units
Position Size
70 170 290 400 800 1300 2100 3200 4600
horizontal
moving vertikal
horizontal
3
US
DIN
DIN US
US DIN
DIN
US
SHOT WEIGHTS | CUBE 1800
Theoretical shot weights for the most important injection moulding materials
Injection units according to EUROMAP 70 170 290
Screw diameter mm 18 22 25 25 30 35 30 35 40
Polystyrene max. g PS 21 31 40 54 77 105 97 132 172
Styrene heteropolymerizates max. g SB 20 31 39 53 76 103 95 129 168
max. g SAN, ABS1) 20 30 39 52 74 101 93 126 165
Cellulose acetate max. g CA1) 24 35 45 61 87 119 109 148 194
Celluloseacetobutyrate max. g CAB1) 22 33 42 56 81 110 101 138 180
Polymethyl methacrylate max. g PMMA 22 32 42 56 80 109 100 136 178
Polyphenylene ether, mod. max. g PPE 19 29 37 50 72 98 90 122 160
Polycarbonate max. g PC 22 33 42 57 81 111 102 139 181
Polysulphone max. g PSU 23 34 44 58 84 115 105 143 187
Polyamides max. g PA 6.6 | PA 61) 21 31 40 53 77 104 96 131 171
max. g PA 6.10 | PA 111) 19 29 37 50 72 98 90 122 160
Polyoximethylene (Polyacetal) max. g POM 26 39 50 66 96 130 120 163 213
Polyethylene terephthalate max. g PET 25 37 48 64 92 126 115 157 205
Polyethylene max. g PE-LD 16 24 30 41 59 80 73 100 130
max. g PE-HD 16 24 31 42 60 82 76 103 134
Polypropylene max. g PP 17 25 32 43 62 84 77 105 137
Fluorpolymerides max. g FEP, PFA, PCTFE1) 33 50 65 86 124 169 155 211 276
max. g ETFE 29 44 57 76 109 148 136 185 242
Polyvinyl chloride max. g PVC-U 25 38 49 65 94 127 117 159 208
max. g PVC-P1) 23 35 45 60 87 118 108 147 192
1) average value
Theoretical shot weights for the most important injection moulding materials
Injection units according to EUROMAP 400 800 1300
Screw diameter mm 35 40 45 45 50 55 55 60 70
Polystyrene max. g PS 141 184 232 291 359 434 521 620 844
Styrene heteropolymerizates max. g SB 137 179 227 284 350 424 509 606 824
max. g SAN, ABS1) 135 176 223 278 344 416 499 594 808
Cellulose acetate max. g CA1) 158 207 262 327 404 488 586 698 949
Celluloseacetobutyrate max. g CAB1) 147 192 243 304 375 454 545 649 883
Polymethyl methacrylate max. g PMMA 145 190 240 300 371 449 538 641 872
Polyphenylene ether, mod. max. g PPE 131 171 216 270 333 403 484 575 783
Polycarbonate max. g PC 148 193 244 305 377 456 547 651 887
Polysulphone max. g PSU 153 199 252 316 390 471 566 673 916
Polyamides max. g PA 6.6 | PA 61) 140 183 231 289 357 431 517 616 838
max. g PA 6.10 | PA 111) 131 171 216 270 333 403 473 575 783
Polyoximethylene (Polyacetal) max. g POM 174 227 287 359 443 536 643 765 1042
Polyethylene terephthalate max. g PET 167 219 277 346 427 517 620 738 1005
Polyethylene max. g PE-LD 106 139 176 219 271 328 393 468 637
max. g PE-HD 110 143 181 227 280 339 406 483 658
Polypropylene max. g PP 112 146 185 232 286 346 415 494 672
Fluorpolymerides max. g FEP, PFA, PCTFE1) 225 294 372 465 574 695 834 992 1350
max. g ETFE 196 256 324 408 504 609 731 870 1185
ARBURG GmbH + Co KG
Polyvinyl chloride max. g PVC-U 170 222 281 351 434 525 629 749 1020
Arthur-Hehl-Strasse
max. g PVC-P
72290
1)
Lossburg 157 205 260 324 401 485 582 692 942
Tel.: +49 7446 33-0
1) average value
www.arburg.com
[email protected] © 2020 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and
4 information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
US
DIN
US DIN
DIN US
DIN
US
Theoretical shot weights for the most important injection moulding materials
Injection units according to EUROMAP
Screw diameter mm
Polystyrene max. g PS
Styrene heteropolymerizates max. g SB
max. g SAN, ABS1)
Cellulose acetate max. g CA1)
Celluloseacetobutyrate max. g CAB1)
Polymethyl methacrylate max. g PMMA
Polyphenylene ether, mod. max. g PPE
Polycarbonate max. g PC
Polysulphone max. g PSU
Polyamides max. g PA 6.6 | PA 61)
max. g PA 6.10 | PA 111)
Polyoximethylene (Polyacetal) max. g POM
Polyethylene terephthalate max. g PET
Polyethylene max. g PE-LD
max. g PE-HD
Polypropylene max. g PP
Fluorpolymerides max. g FEP, PFA, PCTFE1)
max. g ETFE
Polyvinyl chloride max. g PVC-U
max. g PVC-P1)
1) average value
682280_EN_GB_032020 · Subject to alterations
ARBURG GmbH + Co KG
Arthur-Hehl-Strasse
72290 Lossburg
Tel.: +49 7446 33-0
www.arburg.com
[email protected]
© 2020 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and
information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
US
DIN
DIN US
