Scribd
Upload
14 views2 pages

Embeded Base Plate.BPL

Uploaded by

Trai Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views2 pages

Embeded Base Plate.BPL

Uploaded by

Trai Nguyen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RAM BasePlate V1.

5
Rutherford & Chekene-CA
Detailed Design Results
12/12/24 12:47

CRITERIA:
Analysis
Maintain Strain Compatibility
Use min. effective plate area for axial only compression load on plate.
Design
Use ASD 9th to check plate bending
Max concrete bearing per AISC J9.
Anchor Shear Values Only.
Anchor Tension Values Only.

INPUT DATA:
Column
Column Size............................. HSS3X2X1/8
Dim: TW Depth
(in) 0.116 3.00
Base Plate
Plate Fy (ksi) ....................... 50.000
N (Parallel to Web) (in)................ 26.000
B (Perpendicular to Web) (in)........... 11.000
Plate Thickness (in).................... 0.750
Anchor
Anchor Size............................. 5/8"
Anchor Area (in^2)...................... 0.307
Anchor Material......................... Other
Anchor Modulus (ksi) ................. 29000.00
Anchor Strength Fu (ksi) ............. 75.00
Footing
Footing Strength f'c (ksi) ........... 4.00
Concrete Modulus (ksi) .............. 3605.00
Dimension (Parallel to web) (ft)........ 3.00
Dimension (Perpendicular to web) (ft)... 3.00
Design Load
Building Code: - None -
Load combination: Single Load Case
Axial (kip)........................... 21.00
Vx (kip).............................. 21.00
Mx (kip-ft)........................... 0.00
Allowable Stress Increase Factor ..... 1.00

Page 1
RAM BasePlate V1.5
Rutherford & Chekene-CA
Detailed Design Results
12/12/24 12:47

RESULTS:
Analysis
Uniform Load on Base Plate.
Plate Bending
Max bending moment from concrete compression
Allowable Stress Increase Factor .................... 1.00
N Eff (in)........................................... 3.974
B Eff (in)........................................... 3.094
m [N-0.95d]/2.0 (in)................................. 0.562
n [B-0.95b]/2.0 (in)................................. 0.597
Controlling effective width to resist moment (in) ... 3.974
Controlling plate bending moment (kip-ft) ........... 0.10
fb (ksi) ......................................... 3.25
Fb (ksi) ......................................... 37.50
fb/Fb ............................................... 0.09
Thickness Required (in).............................. 0.221
Thickness controlled by cantilever action.
Anchors
Anchor X(in) Y(in) V(kip ) T(kip )
1 -10.50 -3.00 2.63 0.00
2 -3.50 -3.00 2.63 0.00
3 3.50 -3.00 2.63 0.00
4 10.50 -3.00 2.63 0.00
5 -10.50 3.00 2.63 0.00
6 -3.50 3.00 2.63 0.00
7 3.50 3.00 2.63 0.00
8 10.50 3.00 2.63 0.00
Bearing
Eff Area of Support A2 (in^2)........................ 49.17
Plate Area A1 (in^2)................................. 12.29
Sqrt(A2/A1).......................................... 2.00
Allowable Bearing Pressure (ksi) ................. 2.80
Actual Bearing Stress (ksi) ....................... 1.71

DIAGRAM:

# X(in) Y(in)
1 -10.500 -3.000
2 -3.500 -3.000
5 6 7 8 3 3.500 -3.000
HSS3X2X1/8 4 10.500 -3.000
5 -10.500 3.000
6 -3.500 3.000
1 2 3 4 7 3.500 3.000
8 10.500 3.000
PL 26.00 X 11.00 X 0.75 (in)
8 - 5/8" Other Anchor Bolts

Page 2

You might also like