Comparateur PM2110 PM5110
Comparateur PM2110 PM5110
Items 1-2 of 2
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
METSEPM5110 METSEPM2110
Power meter PowerLogic PM5110, modbus, up to EasyLogic PM2110, Power & Energy meter, Total
15th Harmonic, 1DO 33 alarms Harmonic, LED display, Pulse, class 1
Main
Complementary
Type of measurement Current Total current harmonic distortion THD (I) per phase
Voltage Total voltage harmonic distortion THD (U) per phase
Frequency Apparent energy total
Power factor Active and reactive energy total
Energy Apparent power total
Active and reactive power Active and reactive power total
Current average
Voltage average
Frequency average
Power factor average
Network frequency 50 Hz 60 Hz
60 Hz 50 Hz
type of network 1P + N
3P + N
3P
1/5
Items 1-2 of 2
METSEPM5110 METSEPM2110
Power meter PowerLogic PM5110, modbus, up to EasyLogic PM2110, Power & Energy meter, Total
15th Harmonic, 1DO 33 alarms Harmonic, LED display, Pulse, class 1
input impedance Voltage (impedance 5 MOhm) Current (impedance <= 0.3 mOhm)
Current (impedance <= 0.3 mOhm) Voltage (impedance > 5 MOhm)
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Measurement voltage 35…760 V AC 45...65 Hz between phases 35…480 V AC 50/60 Hz between phases
20…440 V AC 45...65 Hz between phase and neutral 20…277 V AC 50/60 Hz between phase and neutral
480…999000 V AC 50/60 Hz with external VT
Number of inputs 0 0
Accuracy class Class 0.5S active energy conforming to IEC 62053- Class 1 active energy conforming to IEC 62053-21
22 Class 1 reactive energy conforming to IEC 62053-24
Communication port protocol Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds POP
even/odd or none - 2 wires, insulation 2500 V
JBUS
Connections - terminals Voltage circuit: screw terminal block4 Current transformer: screw connection (bottom) 6
Control circuit: screw terminal block2 Voltage inputs: screw connection (top) 4
Current transformer: screw terminal block6
Input/output circuit: screw terminal block6
RS485 link: screw terminal block4
Standards UL 61010-1
EN 50470-3
EN 50470-1
IEC 62053-22
IEC 60529
IEC 62053-24
IEC 61557-12
Width 96 mm 96 mm
Height 96 mm 96 mm
2/5
Items 1-2 of 2
METSEPM5110 METSEPM2110
Power meter PowerLogic PM5110, modbus, up to EasyLogic PM2110, Power & Energy meter, Total
15th Harmonic, 1DO 33 alarms Harmonic, LED display, Pulse, class 1
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Reactive power Q, Q1, Q2, Q3
Calculated neutral current
Voltage U, U21, U32, U13, V, V1, V2, V3
Peak demand currents
Unbalance current
Demand power P, Q, S
Active power P, P1, P2, P3
Active, reactive, apparent energy (signed, four
quadrant)
Local signalling Red LED: output signal 1...9999000 pulse/ k_h (kWh,
kVAh, kVARh)
Green LED: module operating (RUN)
Impulse duration 20 ms
3/5
Items 1-2 of 2
METSEPM5110 METSEPM2110
Power meter PowerLogic PM5110, modbus, up to EasyLogic PM2110, Power & Energy meter, Total
15th Harmonic, 1DO 33 alarms Harmonic, LED display, Pulse, class 1
Material Polycarbonate
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Compatibility code PM2110
Environment
Electromagnetic compatibility Voltage dips and interruptions immunity test class A Electrostatic discharge conforming to IEC 61000-4-2
conforming to IEC 61000-4-11 Radiated radio-frequency electromagnetic field
Limits for harmonic current emissions class A immunity test conforming to IEC 61000-4-3
conforming to IEC 61000-3-2 Electrical fast transient/burst immunity test
Electrostatic discharge level 4 conforming to IEC conforming to IEC 61000-4-4
61000-4-2 Surge immunity test conforming to IEC 61000-4-5
Conducted RF disturbances level 3 conforming to Conducted RF disturbances conforming to IEC
IEC 61000-4-6 61000-4-6
Magnetic field at power frequency level 4 conforming Magnetic field at power frequency conforming to IEC
to IEC 61000-4-8 61000-4-8
Conducted and radiated emissions class B Voltage dips and interruptions immunity test
conforming to EN 55022 conforming to IEC 61000-4-11
Immunity to conducted disturbances - test level: 150 Emission tests conforming to FCC part 15 class A
kHz...80 MHz conforming to IEC 61000-4-6
Electrical fast transient/burst immunity test
conforming to IEC 61000-4-4
Radiated radio-frequency electromagnetic field
immunity test conforming to IEC 61000-4-3
Surge immunity test conforming to IEC 61000-4-5
Voltage dips and interruptions immunity test
conforming to IEC 61000-4-11
IP degree of protection IP54 display: conforming to IEC 60529 IP54 front: conforming to IEC 60529
IP30 rear: conforming to IEC 60529 IP30 body: conforming to IEC 60529
Pollution degree 2 2
Packing Units
4/5
Items 1-2 of 2
METSEPM5110 METSEPM2110
Power meter PowerLogic PM5110, modbus, up to EasyLogic PM2110, Power & Energy meter, Total
15th Harmonic, 1DO 33 alarms Harmonic, LED display, Pulse, class 1
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Number of Units in Package 2 12
Offer Sustainability
5/5