Scribd
Upload
4 views

Backflush and Its Priority in Use

Uploaded by

Mangesh Ladkat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Backflush and Its Priority in Use

Uploaded by

Mangesh Ladkat
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Backflush and its priority in use

In several cases we use back flush. Back flush ensures automatic goods issue and we don't have to
do manual issue of goods in production/process order.

The setting of back flush is in different levels in SAP. First setting is there in material master.

In material master there are two options.

First option is always the material will be issued automatically. Second option is issue will be
decided by the work center.

Now work center will also have setting on back flush.

Now let us consider the material master setting is "Work center decides whether to back flush"
and in work center the box for back flush is checked, then the material which will be
used/consumed in this work center will be back flushed.
If the back flush in work center is not checked and material master setting is "Work center decides
whether to backflush", then also backflush will not work as work center is not still activated for
back flush.

The third place where the back flush is maintained is in routing. At the time of component
allocation the backflush option is visible.

In this case if the backflush is checked then this component will be back flush automatically. So if
material master is not set as backflush as well work center is not set also, from the setting of
routing it is possible to set the back flush. Hence the material will be issued automatically for this
routing only(once executing the production/process order). Issue will not happen for the
component everywhere.

Fourth place where we can use the back flush is in production/process order. In order, go to
material tab.

Inside that, check box for backflushing is there. Hence if this box is selected, the the component
will be issued automatically.

The setting of back flush are there to serve different purpose in different levels/stages. One can use
it for desired purpose and application.

You might also like