www.lookpolymers.com email : sales@lookpolymers.
com
Solvay Specialty Polymers Amodel® A-1133 HS Polyphthalamide (PPA), 33%
Glass Fiber (Conditioned)
Category : Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 30% Glass Fiber Reinforced
Material Notes:
Amodel® A-1133 HS is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) with a high heat deflection temperature, high
flexural modulus and high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin.
Testing conducted on samples dry as molded and samples conditioned to 50% relative humidity in accordance with ISO-1110, Accelerated
Method.Features: Good Chemical Resistance; Good Creep Resistance; Good Dimensional Stability; Good Stiffness; High Heat Resistance;
High Stiffness; High Strength; High Temperature Strength; Low Moisture AbsorptionUses: Automotive Applications; Automotive
Electronics; Automotive Interior Parts; Automotive Under the Hood; Cell Phones; Connectors; Fuel Lines; Housings; Industrial Applications;
Industrial Parts; Machine/Mechanical Parts; Metal Replacement; Power/Other ToolsInjection Molding Notes: Amodel® compounds are
shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably
stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a
package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried
prior to molding.Automotive Specifications 3M 11-0003-5762-1 X62 4200; ASTM D4000 PA121 G35 Color: BK324 Black; ASTM D4000
PA121 G35 Color: NT Natural; ASTM D6779 PA121G35; BOSCH N28 BN05-OX1 BN0510-GF35-0Anf01SO Color: NT Natural; BOSCH N28
BN05-OX1 BN0510-GF35-0Asw01SO Color: BK-324 Black; CHRYSLER MS-DB-478 CPN4242 Color: NT Natural; CHRYSLER MS-DB-478
Type A CPN3598 Color: BK324 Black; DELPHI M-53290 Color: BK324 Black; DELPHI M-53290 Color: NT Natural; DELPHI M-6071 Color: NT
Natural; DELPHI MS-5216 Color: BK324 Black; DELPHI MS-5216 Color: NT Natural; FORD WSP-M4D843-A Color: BK324 Black; FORD
WSP-M4D843-A Color: NT Natural; GM GMP.PPA.004 Color: BK324 Black; GM GMP.PPA.004 Color: NT Natural; GM GMW15702-110020
>PPA+GF33< (A4, A22, A64, BA633, DC1473, G20, KM1158, KS2300, LS20, RS9, SS260, Z1) Color: NT Natural; GM GMW16356P-PPA-GF35
Color: BK-324 Black; GM GMW16356P-PPA-GF35 Color: NT Natural; IMDS ID 21195756 Color: Black; IMDS ID 21195756 Color: Natural;
TRW S-13318701 Color: BK543 Black; VALEO VMS-4470 Color: BK324 Black; VALEO VMS-4470 Color: NT Natural; YAZAKI YPES-25-02-
135 Color: Colors; YAZAKI YPES-25-02-135 Color: NT NaturalInformation provided by Solvay Specialty Polymers.
Order this product through the following link:
http://www.lookpolymers.com/polymer_Solvay-Specialty-Polymers-Amodel-A-1133-HS-Polyphthalamide-PPA-33-Glass-Fiber-
Conditioned.php
Physical Properties Metric English Comments
Density 1.48 g/cc 0.0535 lb/in³ Dry; ISO 1183
Filler Content 33 % 33 % Glass Fiber
Linear Mold Shrinkage, Flow 0.0040 cm/cm 0.0040 in/in Dry
Linear Mold Shrinkage, Transverse 0.0080 cm/cm 0.0080 in/in Dry; ASTM D955
Mechanical Properties Metric English Comments
Tensile Strength 193 MPa 28000 psi ASTM D638
Elongation at Break 2.1 % 2.1 % ASTM D638
1/3
www.lookpolymers.com email : [email protected]
Mechanical Properties
Tensile Modulus 13.1 GPa
Metric 1900 ksi
English Comments
ASTM D638
Flexural Strength 254 MPa 36800 psi ASTM D790
Flexural Modulus 11.4 GPa 1650 ksi ASTM D790
Shear Strength 88.9 MPa 12900 psi ASTM D732
Izod Impact, Notched 0.590 J/cm 1.11 ft-lb/in ASTM D256
Thermal Properties Metric English Comments
Melting Point 313 °C 595 °F Dry; ISO 11357-3
313 °C 595 °F Dry; DSC
Electrical Properties Metric English Comments
Volume Resistivity 2.00e+15 ohm-cm 2.00e+15 ohm-cm ASTM D257
4.3 4.3
Dielectric Constant ASTM D150
@Frequency 1.00e+6 @Frequency 1.00e+6
Hz Hz
4.7 4.7
ASTM D150
@Frequency 60.0 Hz @Frequency 60.0 Hz
21.0 kV/mm 533 kV/in
Dielectric Strength ASTM D149
@Thickness 3.20 mm @Thickness 0.126 in
0.0090 0.0090
Dissipation Factor ASTM D150
@Frequency 60.0 Hz @Frequency 60.0 Hz
0.022 0.022
ASTM D150
@Frequency 1.00e+6 @Frequency 1.00e+6
Hz Hz
Arc Resistance 120 sec 120 sec ASTM D495
Comparative Tracking Index 550 V 550 V UL 746
Processing Properties Metric English Comments
Rear Barrel Temperature 304 - 318 °C 579 - 604 °F
Front Barrel Temperature 316 - 329 °C 601 - 624 °F
Melt Temperature 321 - 343 °C 610 - 649 °F
Mold Temperature 135 °C 275 °F
2/3
www.lookpolymers.com email : [email protected]
Processing Properties Metric
120 °C English
248 °F Comments
Drying Temperature
@Time 14400 sec @Time 4.00 hour
Moisture Content <= 0.045 % <= 0.045 %
Descriptive Properties Value Comments
Additive Heat Stabilizer
Availability Africa & Middle East
Asia Pacific
Europe
Latin America
North America
Color Black; Natural
Form Pellets
Part Marking Code >PA6T/6I/66-GF33< ISO 11469
Processing Technique Injection Molding
RoHS Compliance RoHS Compliant
UL File Number E95746 (Global)
Contact Songhan Plastic Technology Co.,Ltd.
Website : www.lookpolymers.com
Email :
[email protected]Tel : +86 021-51131842
Mobile : +86 13061808058
Skype : lookpolymers
Address : United North Road 215,Fengxian District, Shanghai City,China
3/3
