Battery powered performative Sequencer,
Controller and Composition tool with
4 fully independent Sequencers
QUICK GUIDE 4.2
1 Display & Encoders 2 Grid
Power
3 Control Buttons
1 Display & Encoders
SECONDARY
Track
Swing number Clock Source
Playback Direction Bluetooth Connection 1 2 3 4
Sequencer Type Battery State
Tempo Sequencer Division PRIMARY
Scale Root Note | Octave
Encoder functions Turn them to change their Primary Parameter (global Vel, Oct, etc.)
Turn them to enter Vel, Gate, etc. views depending on the sequencer mode.
Press SHIFT and turn for their Secondary Parameter (Tempo, Swing, etc.)
Press SHIFT + Encoder Button to Reset their Secondary Parameter.
2 Grid
SEQUENCER VIEW SEQUENCING TIPS
IN MONO, POLY AND CHORD MODES
pitch
QUICK TAP LONG PRESS TWO PADS - SAME ROW
Activate/Deactivate steps Access step parameters Create a tie-in note by pressing the
leftmost pad first - note start,
time LONG PRESS + SHIFT then rightmost pad - note end.
Access additional
step parameters
SEQUENCER VIEW KEYBOARD VIEW
PERFORMATIVE KEYBOARD
special functions
MULTITRACK MODE
TRACK 8 Keyboard View lets you play notes
In MULTITRACK MODE each and chords quantized in scale
It comes with performative
octave
row represents a Track.
features like the arpeggiator or the
Each Track can have roller.
TRACK 2
TRACK 1 independent parameters. Isomorphic layout available.
C C# D D# E F F# G G# A A# B Details can be found in the manual.
diatonic scale
3 Control Buttons
Activates the Secondary Functions of the BACK · CONFIGURATION
function buttons. Most secondary functions Back to Previous Screen.
are indicated in turquoise green. Double tap to access MAIN Screen (Sequencer View)
SHIFT + Back for Configuration Menu
MUTE + 2 3 4
SEQUENCER STATUS
REC Activates/Deactivates the specific
Enables recording from the Keyboard View or from MIDI IN. Sequencer for playback. Active
Press SHIFT + REC to access the RECORDING MENU. Mute + 1st col pad = Sequencer/Track mute.
Hold REC and press PLAY to enter STEP RECORDING. Selected
SEQUENCER BUTTONS 1 - 4
PLAY / PAUSE Can be configured as FILL button. Each number selects the displayed Sequencer.
SHIFT + Play to set your tempo by Tapping All the UI information will correspond to the Active &
SHIFT + Stop to change the sync mode (if sequencer is stopped) selected Sequencer. Selected
SHIFT + Stop to RESET transport (if sequencer is playing) SHIFT + ··· 4 for Sequencer Settings
SEQUENCER STEPS
Hold any pad in the sequencer view to see the step parameters.
Hold any PAD + SHIFT to toggle the additional step parameters.
ARRANGER KEYBOARD Shows the KEYBOARD ARPEGGIATOR (Keyboard view)
Create your arrangements here. LAYOUT on the grid. Play notes and Each Sequencer has one independent
To Activate/Deactivate, press chords quantized in scale. Arp engine. CHORD mode has a separate
SHIFT + Arranger. PREVIEW Enables pre-listening to Arp independent from the keyboard one.
any step in the Sequencer View. HOLD holds notes for sustained Drones,
Arps and Rolls.
LOAD · RELOAD active pattern COPY · DUPLICATE UNDO · REDO
Check Pattern Storage section COPY + Step or Sequencer Undo-redo destructive actions like
(last page). More options in the Manual. duplicate, clear, etc. and step
toggleing.
SAVE · QUICK SAVE PROJECT PASTE · CLEAR RANDOM PERFORM
Check Pattern Storage section. Target Sequencer or Pad + PASTE Create variations on a sequence.
SNAPSHOT Press LOAD & SAVE More options in the manual. Enable or disable them on individual
to temporarily save the state of tracks in MULTITRACK mode, with
the sequencers for later recal. per-track mask.
INIT or END + STEP/ PAGE Button MOD PERFORM GENERATORS
Change the start and end point of a Modify the global values of the Algorithmic random generator.
sequence. Use in combination with: available modulation lanes using In MULTITRACK you can find as well:
the encoders or drawing in the grid. · Euclidean generator.
Page Buttons
Activate/Deactivate modulations. · Drums pattern generator.
Grid Buttons
SHIFT + / : MOD settings.
Encoders 2 or 3
Double tap to enter EXTERNAL MOD: LFO 1 - 2 · CV GATE
Change the time division · CV Input · MIDI Mappings 2 LFO per Sequencer.
of the selected sequencer. Double tap to toggle between LFO
FOLLOW
1 and 2.
LOOP If ON, the grid will always show the
In MULTITRACK mode, LFOs can be
Press both INIT & END buttons to position of the Transport Bar (in
disabled per track, with LFO-Mask.
enter LOOP menu. the selected track on MULTITRACK
Press + 2 different Steps on the Mode) by automatically switching CV GATE LAYOUT
grid to create a loop between between Pages. Toggles the CV gate Layout view
those two steps. Press again INIT
or END again to exit the loop.
Y DIVISION MENU STEP CHORD · CONDENSE
Grid vertical scroll Gives permanent access to additional
Playback direction parameters. Tap to toggle. Holding a
PAGES Grid Division/Resolution step the screen will show step
Select which Step Page the grid probability, retrigger, time offset, etc.
+ : vertical scroll.
displays. Double Tap to access In CHORD Mode
Pages 80, 96, 114 & 128. Keep pressed for Chord Global Menu
EXPAND Zooms in the current
sequence into a higher resolution. Short Press to toggle between
1/16 notes become 1/32 notes Chord and Extra Step Parameters
Shift the current sequence by one
step left or right. (Destructive!) CONDENSE Collapses the current
Transpose the current sequence sequence into a lower resolution.
one note up or down. 1/16 notes become 1/8 notes
(Destructive!)
SEQUENCER MODES
To change between modes SHIFT + ... 4 (Sequencer
setup menu) + Turn Encoder 4 Press to confirm.
MONOPHONIC POLYPHONIC CHORD CHORD KEYBOARD LAYOUT
Chords Bank
MONO MODE can only have one active note per step. CHORD MODE allows you to write chord progressions Modifiers Muted ON/OFF
Better for quick changes on a melody line. from a predefined palette with different types of User chord slots Autovoicing
chords and voicings.
POLY MODE has up to 7 active notes per step. From the chord submenu (Step Chord) you can edit
More freedom for polyphonic patterns. the chord type and voicing globally or per very step.
TRANSPOSE both modes + HARMONIZER
The pattern will be moved to the “closest position of From an existing Chord Progression, you can quickly
your finger”. The Poly Sequence will be transposed harmonize your melody by changing the scale to
according to the lowest note. HARMON on the desired Sequencer. This works in all 13 14 15 16
This works in CHORD MODE too. the other three modes (except matriceal). Set Chord Type
Set Chord Voicing
Set Chord Spread
NOTE INDICATORS MONO, POLY & CHORD MODE MODE TRANSFORMATION
GENERATIVE MODES
TIED NOTE NOTES IN HIGHER OCTAVE A MONO Sequence can be transformed into a POLY Sequence
from the Sequencer setting menu or by simply copying a STOCHASTIC MATRICEAL
MONO Seq into a POLY Seq.
For more information about these two
A CHORD Sequence can also be transformed into a POLY generative modes, please refer to the user
Sequence. Repeat the previous process as with MONO . manual.
Chords will be exploded in the POLY Seq, so you can Fine Tune
your chord progressions.
NOTE IN LOWER OCTAVE
MULTITRACK
SELECTED TRACK TIED NOTE There is a Transposition Control per Track,
MULTITRACK MODE can handle 8 melodic patterns or Independent Length, Time Division, and MIDI Channel.
drum tracks. These 8 tracks can have independent
parameters between them. Every row on the grid One independent Modulation Lane per Track (8 in total)
represents each track. Glide Control (CV only) affects all the steps of the
track.
MULTITRACK is not only for drums, you can set notes
per step and control all the other parameters to Most of the UI functions will affect only the
create interesting melodic patterns. selected track. Any action in the grid on any track
MUTED TRACK
will change the selected track.
NO ARMED TRACKS 8 TRACK LAYOUT TRACK 6 ARMED FULL KEYBOARD VIEW
TRACK TRIGGERS [Velocity Pad Areas]
Track Note offset, MIDI Channel and
assigned CV-Gates apply to each 12-Pads
area. Each Pad has a different Velocity
value.
13 14 15 16
Example View when a Track is Armed.
Rolls The Keyboard and Recording will only affect the
Arm/select Armed Track. Equivalent to the Keyboard in MONO.
Mute
Solo
MULTITRACK SHORTCUTS
+ SHIFT + MUTE + 1st column + Vel, Gate or Mod
Randomize the Triggers, Gates and Offsets of all tracks Mute/Unmute the respective tracks Affects all tracks of the MULTITRACK Sequencer.
MUTE + 16th column Useful for melodic patterns.
+
Solo/No-Solo the respective tracks
Show Settings Menu of the Selected track
Hold or LFO or Ext MOD +
+ INIT / END + STEP CHORD 1st column (masks) toggles which track is affected by Paste a copied MONO Sequence into the respective
Select the initial and end steps of ALL the tracks. Random, LFO or Ext modulation respectively track. This way you can copy one pattern of a MONO
+ SHIFT + Sequencer into a single track of a MULTITRACK
Euclidean generator and drum pattern generator Sequencer.
Clear all tracks
(PRESS TWICE to access the random generator)
QUICK START
CONNECTIONS POWER ON FULL MANUAL
Plug your OXI One to your computer or a USB Power 1. After startup, the Piano Roll Layout of Visit oxiinstruments.com/oxi-one/manual
supply with the provided cable to fully charge the Sequencer 1 will appear. Enter a few Steps by Or scan the QR code:
battery. quick-pressing some pads on the grid.
You can start using with ONE and any audio app for 2. Make sure the MIDI Channel is correct.
mobile or desktop or with your favourite DAW. SHIFT + + turn Encoder 1
Or you directly connect your MIDI synthesizer with
the provided DIN to TRS adaptor. Back to exit · Play to start playback
... 4 Toggle the view between Sequencers
MUTE + Activate / deactivate Share your creativity and tag us in your social media:
@oxiinstruments #oxione #oxiinstruments
PATTERN STORAGE
STORE UP TO 15 PROJECTS
PROJECT INFO / + + / +
Name 12 Arrangements / Songs You can QUICKLOAD/SAVE patterns
Tempo Song Names LOAD or SAVE from the Menu
1st Encoder selects project directly from the Grid.
2nd Encoder selects pattern QUICK PROJECT SAVE: SHIFT +
16 PATTERNS PER SEQUENCER
64 PATTERNS IN TOTAL PER PROJECT QUICK RELOAT PATTERN: SHIFT +
PATTERN 16
PATTERN 2
PATTERN 1
ARRANGEMENT VIEW
SEQ 1 The Arranger view lets you arrange or chain your SEQ 1
patterns in a quick and effective way.
SEQ 4 This view is also an alternative way to Quick Load SEQ 4
or Save your patterns.
4 FIRST ROWS show the project patterns. Check the manual to get the most of the Arranger. 4 LAST ROWS show the 4 arranger lanes, one per
Unlit positions are empty. sequencer.
WARRANTY WARNING REGULATORY AND CONFORMITY DECLARATION
OXI Instruments warrants the included hardware product and FCC INFORMATION: Important notice: do not modify this unit!
Always follow the basic precautions listed below to avoid the
This product meets requirements once it is produced and
accessories against defects in materials and workmanship for possibility of serious injury or even deatch from electrical shock, assembled. Modifications not expressly approved by odisei
one year from the date of original purchase. short-circuiting, damages, fire or other hazards. These music may void your authority, granted by the fcc, to use the
The warranty will not cover the repairing costs of the following precautions include, but are not limited to, the following: product. This device complies with part 15 of the fcc rules.
cases: Operation is subject to the following two conditions: (1) this
• Do not open the instrument or attemp to disassemble the
device may not cause harmful interference, and (2) this device
• Misuse of OXI One, wether subject to extreme conditions, as internal parts or modify them in any way. Doing so would void must accept any interference received, including interference
using it incorrectly. Improper handling of the product. products’s warranty. that may cause undesired operation.
• Normal wear and tear, nor damage caused by accident or abuse. • Do not expose the instrument to rain, use it near water or in Contains FCC ID: 2A094-MK02.
• Malfunction due to the use of accessories not authorized by OXI damp or wet conditions.
EU INFORMATION Hereby, Oxi Electronic Instruments S.L.U.
Instruments. OXI Instruments cannot be held responsible for damage caused by declares that the radio equipment type OXI One is in
improper use or modifications to the instrument, or data that is compliance with Directive 2014/53/EU & Directive 2011/65/EU.
This product is classified as Radio Equipment. lost or destroyed.
Battery Notice: This product incorporates a Li-Po type Battery.
Quick Guide 4.2
