ZAXIS-7G series

HYDRAULIC EXCAVATOR
Model code : ZX350H-7G / ZX350LCH-7G
Engine rated power : 200 kW (268HP)
Operating weight : 33 600 - 35 400 kg
Bucket capacity : 2.00 m3 - 2.30 m3

230907_ZX350-7G_EN 270624.indd 1 27/6/24 6:02 PM

 ZX350-7G
SPECIFICATIONS
ENGINE UNDERCARRIAGE DIMENSIONS
Model Isuzu 6HK1 Tracks
Unit : mm
4-cycle water-cooled, Heat-treated connecting pins with dirt seals. Hydraulic (grease) track 3 190 11 380
Type
common rail direct injection adjusters with shock-absorbing recoil springs.
Aspiration Turbocharged, intercooled Numbers of Rollers and Shoes on Each Side 2 990 R3 600
No. of cylinders 6 Upper rollers 2
Rated power 7 : ZX350H-7G
Lower rollers
ISO 14396 : 2002 gross 200 kW (268HP) at 1 900 min-1 (rpm) 8 : ZX350LCH-7G

3 580
ISO 9249 : 2007 net 190 kW (254HP) at 1 900 min-1 (rpm) 45 : ZX350H-7G

3 150
Track shoes
Maximum torque 1 069 Nm (109 kgfm) at 1 500 min-1 (rpm) 48 : ZX350LCH-7G

1 160
Piston displacement 7.790 L Track guards 3 : ZX350H-7G / ZX350LCH-7G

1 070
Bore and stroke 115 mm x 125 mm Travel Device 500*
Batteries 2 x 12 V Each track driven by 2-speed axial piston motor. 600
Parking brake is spring-set/hydraulic-released disc type. 2 590 3 370 / 4 050**
Automatic transmission system: High-Low.
3 190 4 640 / 4 970**
HYDRAULIC SYSTEM High : 0 to 5.0 km/h
Travel speeds
Hydraulic Pumps Low : 0 to 3.2 km/h
* Excluding track shoe lug **LCH
Main pumps 2 variable displacement axial piston pumps Maximum traction
298 kN (30 400 kgf)
force
Maximum oil flow 2 x 288 L/min
Gradeability 70% (35 degree) continuous
Pilot pump 1 gear pump WORKING RANGES
Maximum oil flow 30.2 L/min
Unit : mm
Hydraulic Motors SERVICE REFILL CAPACITIES
Travel 2 variable displacement axial piston motors Fuel tank 630.0 L
Swing 1 axial piston motor Engine coolant 41.0 L
Relief Valve Settings Engine oil 41.0 L
Implement circuit 34.3 MPa (350 kgf/cm²) Swing device 15.7 L
Swing circuit 32.4 MPa (330 kgf/cm²) Travel device (each side) 11.0 L
Travel circuit 34.3 MPa (350 kgf/cm²) Hydraulic system 340.0 L
Pilot circuit 3.9 MPa (40 kgf/cm²) Hydraulic oil tank 180.0 L
Power boost 38.0 MPa (338 kgf/cm²)
Hydraulic Cylinders
Quantity Bore Rod diameter WEIGHTS AND GROUND PRESSURE
Boom 2 145 mm 100 mm ZX350H-7G / ZX350LCH-7G
Arm 1 170 mm 115 mm Equipped with 6.4 m H-boom, 2.33 m Arm and 2.00 m3 Bucket
(ISO 7451 : 2007 heaped)
Bucket 1 140 mm 95 mm
Shoe width Weight kPa
Shoe type
(mm) (kg) (kgf/cm2)

UPPERSTRUCTURE ZX350H-7G Triple grouser 600 33 700 68 (0.69)

Revolving Frame ZX350LCH-7G Triple grouser 600 34 400 64 (0.65)

D-section frame for resistance to deformation. ZX350H-7G Triple grouser 800 34 700 52 (0.54)

Swing Device ZX350LCH-7G Triple grouser 800 35 400 50 (0.51)

Axial piston motor with planetary reduction gear is bathed in oil. Swing
circle is single-row. Swing parking brake is spring-set/
hydraulicreleased disc type. BUCKET AND ARM DIGGING FORCE
Swing speed 10.7 min-1 (rpm)
Swing torque 120 kNm (12 200 kgfm) 2.33 m
Arm length kN kgf
Bucket digging force* ISO 6015 : 2006 246 25 100
Arm crowd force* ISO 6015 : 2006 250 25 500
* At power boost

Excluding track shoe lug

12 13

230907_ZX350-7G_EN 270624.indd 12-13 27/6/24 6:02 PM