SOUTH S6 External UHF Radio
User Manual
SOUTH SURVEYING & MAPPING TECHNOLOGY CO., LTD.
Content
1. Introduction ............................................................................ 2
2. Components and Accessories ..........................................3
2.1 Components ................................................................... 3
2.2 Panel and Ports ..............................................................4
2.3 Accessories: .....................................................................6
2.4 Interface ........................................................................... 7
2.5 Wireless Transmission ................................................. 7
2.6 Protocol, Custom Frequencies and Baud Rate
Configuration ........................................................................ 9
2.7 Check List ...................................................................... 12
3. Technical Specifications ................................................... 14
1
1. Introduction
Utilizing a new generation of design, SOUTH S6 external UHF
radio is a high-power and high-speed data communication
device with various transmission formats. It applies a
brand-new radio frequency circuit design with excellent heat
emission ability, a concise GUI and v smart controlling
modes. This radio utilizes advanced radio frequency
identification (RFID), digital processing technique, and
baseband processing technique to ensure its lasting reliable
performance. The transmission speed of S6 can reach 9600Bps.
Equipping with a 19200 high-speed wireless modular radio, S6
thus has a relatively high radio frequency transmit power. It
applies 2GFSK/4FSK modulation(data speed: 9600Bps,
19.2KBps), which has a high transmission speed together with
a low error rate. S6 supports most of the commonly used
protocols both at home and abroad. Additionally, it supports
the emerging Farlink protocol. It works with high efficiency
pairing up with RTK to conduct surveys. Its radio frequency
covers bands from 410MHz to 470MHz. S6 contains up to 120
channels that can be configured flexibly. Meanwhile, it can
operate easily with in-built Bluetooth and support wireless
transmission.
2
2. Components and Accessories
2.1 Components
LCD
Control Panel Indicators
Bluetooth
Those components indicate working status and data.
In addition, you can configure the radio with the components.
Hook
Radiator
3
Radiator: When the radio is sending signals, it will produce
a large amount of heat while the radiator stops it from
getting too hot.
Hook: It hangs the radio on a tripod or other braces.
Warning: Do not place anything on the radiator,
otherwise the radio will be overheated hence
damage or danger.
2.2 Panel and Ports
Control Panel
LCD
UP/DOWN Button
Protocol Indicator
LEFT/RIGHT Button
Bluetooth Indicator
SELECT/CHANGE Button Data Transmission Indicator
Power Indicator
POWER Button Control Panel
UP/DOWN Button: Switch digits from up and down
LEFT/RIGHT Button: Configure radio settings, switch digit
number between left and right
LCD: Display channel information
4
SELECT/CHANGE Button: Switch protocol. S6 supports three
protocols: SOUTH, FARLINK and Trimtalk.
POWER Button: Turn on/off the radio. Press the button for 2
seconds to turn on/off the radio. When the radio is on, you
can press the button for about 1 second to search for a
Bluetooth connection.
(BT) Bluetooth Indicator: Bluetooth has connected to the
radio when this indicator flickers.
(DATA) Data Transmission Indicator: A flickering indicator
means the radio is sending data.
(PWR) Power Indicator: It denotes whether the radio is
on/off.
Protocol Indicator: 1) Green light: Farlink; 2) Red light:
SOUTH; 3) Blue light: Trimtalk.
5-pin Port: You can connect S6 to an RTK receiver to
transfer data or connect it to a power supply through this
port.
Antenna Connector: Install an antenna here
5
2.3 Accessories:
1 ) Radio Antenna: The UHF antenna is designed for the
outdoors, whose frequency is 450MHz-470MHz, with
several merits such as compact, aesthetically pleasing and
durable.
Port
2 )Data and Power Cord: It connects the radio and transmitter.
This cord can transmit data or supply power.
Radio Port (Black)
Receiver Port (Red)
6
2.4 Interface
Channel: 5
Farlink protocol: Green light
Power Indicator: It flickers
when the voltage is lower
Display Channel than 10.8V
2.5 Wireless Transmission
S6 supports wireless transmission, that is to say, radio and
receiver can transmit data without wires.
When you turn on the radio, press the POWER button for
about one second to enter the searching mode.
7
LCD Screen: "188" and "000" flicker
alternatively
Flickering white light: It means the
radio is already in searching mode.
When the radio finish searching, the LCD screen will display the last two
digits of the machine code.
For example:
If RTK "SG70A314800341" works as a base to
conduct wireless transmission, the radio LCD screen
will display the last two digits of the machine code,
which in this case is: 41.
If it does not show up the number "41", you can use
the UP/DOWN button to look for it.
When it is correctly selected, after 5 seconds the
radio will automatically connect to the machine;
meanwhile, the machine will automatically set to
base mode.
8
2.6 Protocol, Custom Frequencies and Baud Rate
Configuration
You can connect to S6 on the software EGStar through
Bluetooth. Choose the correct radio and connect to it. It is
shown in the following pictures.
Select "Internal UHF" and then "Radio frequency setting" after
connecting to S6. It is shown in the following pictures.
Technicians can configure based on the display information.
There are 120 channels available.
9
10
Appendix: 120 Default SOUTH Channels
Channel 1 463.125 Channel 41 440.125 Channel 81 420.125
Channel 2 464.125 Channel 42 441.125 Channel 82 421.125
Channel 3 465.125 Channel 43 442.125 Channel 83 422.125
Channel 4 466.125 Channel 44 443.125 Channel 84 423.125
Channel 5 463.625 Channel 45 444.125 Channel 85 424.125
Channel 6 464.625 Channel 46 445.125 Channel 86 425.125
Channel 7 465.625 Channel 47 446.125 Channel 87 426.125
Channel 8 466.625 Channel 48 447.125 Channel 88 427.125
Channel 9 460.125 Channel 49 448.125 Channel 89 428.125
Channel 10 160.625 Channel 50 449.125 Channel 90 429.125
Channel 11 461.125 Channel 51 440.625 Channel 91 420.625
Channel 12 461.625 Channel 52 441.625 Channel 92 421.625
Channel 13 462.125 Channel 53 442.625 Channel 93 422.625
Channel 14 462.625 Channel 54 443.625 Channel 94 423.625
Channel 15 467.125 Channel 55 444.625 Channel 95 424.625
Channel 16 467.625 Channel 56 445.625 Channel 96 425.625
Channel 17 468.125 Channel 57 446.625 Channel 97 426.625
Channel 18 469.125 Channel 58 447.625 Channel 98 427.625
Channel 19 468.625 Channel 59 448.625 Channel 99 428.625
Channel 20 469.625 Channel 60 449.625 Channel 100 429.625
Channel 21 450.125 Channel 61 430.125 Channel 101 410.125
Channel 22 451.125 Channel 62 431.125 Channel 102 411.125
Channel 23 452.125 Channel 63 432.125 Channel 103 412.125
Channel 24 453.125 Channel 64 433.125 Channel 104 413.125
Channel 25 454.125 Channel 65 434.125 Channel 105 414.125
Channel 26 455.125 Channel 66 435.125 Channel 106 415.125
Channel 27 456.125 Channel 67 436.125 Channel 107 416.125
Channel 28 457.125 Channel 68 437.125 Channel 108 417.125
Channel 29 458.125 Channel 69 438.125 Channel 109 418.125
Channel 30 459.125 Channel 70 439.125 Channel 110 419.125
Channel 31 450.625 Channel 71 430.625 Channel 111 410.625
Channel 32 451.625 Channel 72 431.625 Channel 112 411.625
Channel 33 452.625 Channel 73 432.625 Channel 113 412.625
Channel 34 453.625 Channel 74 433.625 Channel 114 413.625
Channel 35 454.625 Channel 75 434.625 Channel 115 414.625
Channel 36 455.625 Channel 76 435.625 Channel 116 415.625
Channel 37 456.625 Channel 77 436.625 Channel 117 416.625
Channel 38 457.625 Channel 78 437.625 Channe118 417.625
Channel 39 458.625 Channel 79 438.625 Channel 119 418.625
Channel 40 459.625 Channel 80 439.625 Channel 120 419.625
11
2.7 Check List
Nominal Voltage: 12-15V (typical voltage: 13.8V);
Radio-frequency Emission Power: 25W;
Rated Current: 6.0A.
Radio-frequency Emission Power: Emission power is relevant
to voltage. Please check the voltage before using it.
High/Low Power: Please use Low Power (L) when it is
sufficient for surveying. High Power (H) will multiply power
consumption; moreover, overuse of High Power (H) will
reduce battery lifespan. Please set the radio on high terrain
as possible. A suitable height would be beneficial to signal
transmission.
Ripple Factor (RF): RF should be smaller than 40mV. A
smaller RF has less influence on radio frequency and higher
communication quality.
Power Connection: Please ensure connecting to power
supplies with anode and cathode properly.
Electromagnetic Environment: Please monitor the
electromagnetic environment before the survey to avoid a
communication blind district.
Choosing Antenna: There are several basic parameters for
choosing a suitable antenna such as frequency bandwidth,
12
operating frequency, transmission gain, directivity,
impedance and standing-wave ratio(SWR). Usually, the
effective bandwidth of an antenna is 20MHz. You can
choose antennas based on the intended using frequencies.
If you intend to transmit from a far distance, our suggestion
is to choose directive antennas or high-gain antennas. In
addition, please check whether the impedance of antennas
and feeders can match the impedance of the antenna
connector(50Ω).
Our Suggestions:
We suggest using 12V/40Ah power supplies. While using
power supplies, the regulated current needs to be kept on
10A.
We suggest recharging your power supplies on time.
Overuse of power supplies may reduce battery lifespan.
We suggest replacing the power supplies after using them
for about half a year or one year to ensure the radio
transmission distance.
13
3. Technical Specifications
Frequency Range 410MHz-470MHz
Operating System NULL
Modulation GMSK/4FSK
Channel Bandwidth 500KHz@farlink 、
25KHz@other
Channels 120
SOUTH
UHF
TrimTalk
HUACE
Protocols Hi-Target ( ZHD )
Satel
KOLIDA
Farlink
Air Baud Rate 9600/19200
Serial Port RS-232
Data
Bluetooth Bluetooth2.1
Communication
WiFi Not supported
Nixietube Three 7-Seg LED Nixietube
Interactive LED Protocol, Bluetooth, data,
Interface power
Push Buttons 4 buttons
14
Bluetooth Supported
Configuration
TNC Antenna Connector
External Port 5-pin LEMO 5-pin LEMO external power
port +RS-232
Power Input 9-16V
Reverse Polarity Supported
Electrical
Protection
Characteristics
ESD Protection Supported
Power Port 5-pin LEMO
Waterproof/Dustproof IP67
Environmental Operation Temp -30 ℃ -60 ℃
Design Storage Temp -40 ℃ -85 ℃
Vibration Test MIL - STD- 810F
Weight 1.35KG
Physical
Size 144mm*174mm*65.9mm
15