CentreCOM TM CentreCOM TM CentreCOM TM CentreCOM TM

AT-210T and AT-210TS AT-210T and AT-210TS AT-210T and AT-210TS AT-210T and AT-210TS
Micro Transceiver User Manual Micro Transceiver User Manual Micro Transceiver User Manual Micro Transceiver User Manual

Overview Overview Overview Overview

The Micro Ethernet Transceiver Series of products are direct attach IEEE 802.3 and The Micro Ethernet Transceiver Series of products are direct attach IEEE 802.3 and The Micro Ethernet Transceiver Series of products are direct attach IEEE 802.3 and The Micro Ethernet Transceiver Series of products are direct attach IEEE 802.3 and
Ethernet Version 1.0 and 2.0 devices. ATI supports all common Ethernet media with Ethernet Version 1.0 and 2.0 devices. ATI supports all common Ethernet media with Ethernet Version 1.0 and 2.0 devices. ATI supports all common Ethernet media with Ethernet Version 1.0 and 2.0 devices. ATI supports all common Ethernet media with
Micro Transceivers for thin coax (10BASE2), UTP (10BASE-T) and FOIRL LAN sys- Micro Transceivers for thin coax (10BASE2), UTP (10BASE-T) and FOIRL LAN sys- Micro Transceivers for thin coax (10BASE2), UTP (10BASE-T) and FOIRL LAN sys- Micro Transceivers for thin coax (10BASE2), UTP (10BASE-T) and FOIRL LAN sys-
tems. The transceivers support a single AUI that attach directly to the AUI 15 pin con- tems. The transceivers support a single AUI that attach directly to the AUI 15 pin con- tems. The transceivers support a single AUI that attach directly to the AUI 15 pin con- tems. The transceivers support a single AUI that attach directly to the AUI 15 pin con-
nection found on most Ethernet stations (DTEs). Direct AUI connection reduces nection found on most Ethernet stations (DTEs). Direct AUI connection reduces nection found on most Ethernet stations (DTEs). Direct AUI connection reduces nection found on most Ethernet stations (DTEs). Direct AUI connection reduces
cabling costs for the installer. cabling costs for the installer. cabling costs for the installer. cabling costs for the installer.
All ATI transceivers are equipped with LEDs, providing status and diagnostic informa- All ATI transceivers are equipped with LEDs, providing status and diagnostic informa- All ATI transceivers are equipped with LEDs, providing status and diagnostic informa- All ATI transceivers are equipped with LEDs, providing status and diagnostic informa-
tion. LEDs make LAN installation and troubleshooting easy for the installer. An easily tion. LEDs make LAN installation and troubleshooting easy for the installer. An easily tion. LEDs make LAN installation and troubleshooting easy for the installer. An easily tion. LEDs make LAN installation and troubleshooting easy for the installer. An easily
accessible, user selectable SQE Test switch (heartbeat) is also provided on all mod- accessible, user selectable SQE Test switch (heartbeat) is also provided on all mod- accessible, user selectable SQE Test switch (heartbeat) is also provided on all mod- accessible, user selectable SQE Test switch (heartbeat) is also provided on all mod-
els. ATI uses quality product packaging for increased reliability. ATI shows a high level els. ATI uses quality product packaging for increased reliability. ATI shows a high level els. ATI uses quality product packaging for increased reliability. ATI shows a high level els. ATI uses quality product packaging for increased reliability. ATI shows a high level
of confidence in the micro transceiver products with a 5 year warranty. of confidence in the micro transceiver products with a 5 year warranty. of confidence in the micro transceiver products with a 5 year warranty. of confidence in the micro transceiver products with a 5 year warranty.

Preparation Preparation Preparation Preparation

An SQE Test switch (heartbeat) is available to provide IEEE 802.3 Ethernet SQE Test- An SQE Test switch (heartbeat) is available to provide IEEE 802.3 Ethernet SQE Test- An SQE Test switch (heartbeat) is available to provide IEEE 802.3 Ethernet SQE Test- An SQE Test switch (heartbeat) is available to provide IEEE 802.3 Ethernet SQE Test-
ing. If required, place the SQE Test switch to the “ON” position. An illuminated LED ing. If required, place the SQE Test switch to the “ON” position. An illuminated LED ing. If required, place the SQE Test switch to the “ON” position. An illuminated LED ing. If required, place the SQE Test switch to the “ON” position. An illuminated LED
indicates the SQE Test is enabled. If the DTE does not require an SQE Test, or if the indicates the SQE Test is enabled. If the DTE does not require an SQE Test, or if the indicates the SQE Test is enabled. If the DTE does not require an SQE Test, or if the indicates the SQE Test is enabled. If the DTE does not require an SQE Test, or if the
DTE is a repeater, place SQE Test switch to “OFF”. The SQE Test is disabled when DTE is a repeater, place SQE Test switch to “OFF”. The SQE Test is disabled when DTE is a repeater, place SQE Test switch to “OFF”. The SQE Test is disabled when DTE is a repeater, place SQE Test switch to “OFF”. The SQE Test is disabled when
the LED is off. Disable the heartbeat function by turning the SQE Test switch “OFF” the LED is off. Disable the heartbeat function by turning the SQE Test switch “OFF” the LED is off. Disable the heartbeat function by turning the SQE Test switch “OFF” the LED is off. Disable the heartbeat function by turning the SQE Test switch “OFF”
when the Ethernet MAU is connected to a repeater to eliminate the possibility of when the Ethernet MAU is connected to a repeater to eliminate the possibility of when the Ethernet MAU is connected to a repeater to eliminate the possibility of when the Ethernet MAU is connected to a repeater to eliminate the possibility of
excessive collisions. excessive collisions. excessive collisions. excessive collisions.
Installation
Installation Installation Installation
The AT-210T or AT-210TS connects directly to a DTE or workstation AUI connector.
The AT-210T or AT-210TS connects directly to a DTE or workstation AUI connector. The AT-210T or AT-210TS connects directly to a DTE or workstation AUI connector. The AT-210T or AT-210TS connects directly to a DTE or workstation AUI connector. The AT-210TS, the slim-line version, includes a connector extension for tight installa-
The AT-210TS, the slim-line version, includes a connector extension for tight installa- The AT-210TS, the slim-line version, includes a connector extension for tight installa- The AT-210TS, the slim-line version, includes a connector extension for tight installa- tions. Plug the transceiver into the 15 pin AUI connection on the DTE and slide the
tions. Plug the transceiver into the 15 pin AUI connection on the DTE and slide the tions. Plug the transceiver into the 15 pin AUI connection on the DTE and slide the tions. Plug the transceiver into the 15 pin AUI connection on the DTE and slide the connector latch into place. Power on the DTE and verify that the power indicator is lit.
connector latch into place. Power on the DTE and verify that the power indicator is lit. connector latch into place. Power on the DTE and verify that the power indicator is lit. connector latch into place. Power on the DTE and verify that the power indicator is lit. Check to ensure the SQE Test setting is appropriate for equipment per the above
Check to ensure the SQE Test setting is appropriate for equipment per the above Check to ensure the SQE Test setting is appropriate for equipment per the above Check to ensure the SQE Test setting is appropriate for equipment per the above requirements. Plug a UTP cable into the RJ45 receptacle located on the AT-210T
requirements. Plug a UTP cable into the RJ45 receptacle located on the AT-210T requirements. Plug a UTP cable into the RJ45 receptacle located on the AT-210T requirements. Plug a UTP cable into the RJ45 receptacle located on the AT-210T transceiver. Check the Link LED to ensure equipment on the other end of link is oper-
transceiver. Check the Link LED to ensure equipment on the other end of link is oper- transceiver. Check the Link LED to ensure equipment on the other end of link is oper- transceiver. Check the Link LED to ensure equipment on the other end of link is oper- ational. Stations will communicate if both local and remote transceivers’ link LEDs are
ational. Stations will communicate if both local and remote transceivers’ link LEDs are ational. Stations will communicate if both local and remote transceivers’ link LEDs are ational. Stations will communicate if both local and remote transceivers’ link LEDs are on. Four LEDs provide Link, SQE status, Polarity and Power information. If another
on. Four LEDs provide Link, SQE status, Polarity and Power information. If another on. Four LEDs provide Link, SQE status, Polarity and Power information. If another on. Four LEDs provide Link, SQE status, Polarity and Power information. If another 10BASE-T MAU is at the opposite end of the line, the UTP cabling must be crossed,
10BASE-T MAU is at the opposite end of the line, the UTP cabling must be crossed, 10BASE-T MAU is at the opposite end of the line, the UTP cabling must be crossed, 10BASE-T MAU is at the opposite end of the line, the UTP cabling must be crossed, i.e. TD+ and TD- signals must be swapped with RD+ and RD- signals respectively. If
i.e. TD+ and TD- signals must be swapped with RD+ and RD- signals respectively. If i.e. TD+ and TD- signals must be swapped with RD+ and RD- signals respectively. If i.e. TD+ and TD- signals must be swapped with RD+ and RD- signals respectively. If the polarity LED is lit, no polarity correction is occurring. If the polarity LED is off, the
the polarity LED is lit, no polarity correction is occurring. If the polarity LED is off, the the polarity LED is lit, no polarity correction is occurring. If the polarity LED is off, the the polarity LED is lit, no polarity correction is occurring. If the polarity LED is off, the polarity of RD+ and RD- are being swapped internally by the transceiver. 26 to 22
polarity of RD+ and RD- are being swapped internally by the transceiver. 26 to 22 polarity of RD+ and RD- are being swapped internally by the transceiver. 26 to 22 polarity of RD+ and RD- are being swapped internally by the transceiver. 26 to 22 AWG (0.4 - 0.6 mm) UTP cable in multi-wire cable with 100Ω impedance needed.
AWG (0.4 - 0.6 mm) UTP cable in multi-wire cable with 100Ω impedance needed. AWG (0.4 - 0.6 mm) UTP cable in multi-wire cable with 100Ω impedance needed. AWG (0.4 - 0.6 mm) UTP cable in multi-wire cable with 100Ω impedance needed. IEEE 802.3 Specifications: 100m (328 ft.) maximum UTP cable link segment.
IEEE 802.3 Specifications: 100m (328 ft.) maximum UTP cable link segment. IEEE 802.3 Specifications: 100m (328 ft.) maximum UTP cable link segment. IEEE 802.3 Specifications: 100m (328 ft.) maximum UTP cable link segment.
Vorbereitung
Vorbereitung Vorbereitung Vorbereitung
Fuer die Durchfuehrung eines SQE-Testes (Heartbeat) gem. IEEE 802.3 Ethernet
Fuer die Durchfuehrung eines SQE-Testes (Heartbeat) gem. IEEE 802.3 Ethernet Fuer die Durchfuehrung eines SQE-Testes (Heartbeat) gem. IEEE 802.3 Ethernet Fuer die Durchfuehrung eines SQE-Testes (Heartbeat) gem. IEEE 802.3 Ethernet steht ein entsprechender Schalter zur Verfuegung. Bei Bedarf kann dieser SQE
steht ein entsprechender Schalter zur Verfuegung. Bei Bedarf kann dieser SQE steht ein entsprechender Schalter zur Verfuegung. Bei Bedarf kann dieser SQE steht ein entsprechender Schalter zur Verfuegung. Bei Bedarf kann dieser SQE Testschalter auf “ON” gestellt werden. Eine erleuchtete LED zeigt an, dass der SQE
Testschalter auf “ON” gestellt werden. Eine erleuchtete LED zeigt an, dass der SQE Testschalter auf “ON” gestellt werden. Eine erleuchtete LED zeigt an, dass der SQE Testschalter auf “ON” gestellt werden. Eine erleuchtete LED zeigt an, dass der SQE Test aktiviert ist. Leuchtet diese nicht, ist die Funktion deaktiviert. Wird der Heartbeat
Test aktiviert ist. Leuchtet diese nicht, ist die Funktion deaktiviert. Wird der Heartbeat Test aktiviert ist. Leuchtet diese nicht, ist die Funktion deaktiviert. Wird der Heartbeat Test aktiviert ist. Leuchtet diese nicht, ist die Funktion deaktiviert. Wird der Heartbeat nicht benoetigt, oder ist das Endgeraet ein Repeater, ist die Stellung “OFF” zu wae-
nicht benoetigt, oder ist das Endgeraet ein Repeater, ist die Stellung “OFF” zu wae- nicht benoetigt, oder ist das Endgeraet ein Repeater, ist die Stellung “OFF” zu wae- nicht benoetigt, oder ist das Endgeraet ein Repeater, ist die Stellung “OFF” zu wae- hlen. Die “OFF” Stellung wird empfohlen, wenn die Ethernet MAU mit einem Repeater
hlen. Die “OFF” Stellung wird empfohlen, wenn die Ethernet MAU mit einem Repeater hlen. Die “OFF” Stellung wird empfohlen, wenn die Ethernet MAU mit einem Repeater hlen. Die “OFF” Stellung wird empfohlen, wenn die Ethernet MAU mit einem Repeater verbunden ist, um die Moeglichkeit uebermaessiger Kollisionen auszuschalten.
verbunden ist, um die Moeglichkeit uebermaessiger Kollisionen auszuschalten. verbunden ist, um die Moeglichkeit uebermaessiger Kollisionen auszuschalten. verbunden ist, um die Moeglichkeit uebermaessiger Kollisionen auszuschalten.
Installation
Installation Installation Installation
Der AT-210T/AT-210TS wird direkt mit dem AUI Anschluss des Endgeraetes oder der
Der AT-210T/AT-210TS wird direkt mit dem AUI Anschluss des Endgeraetes oder der Der AT-210T/AT-210TS wird direkt mit dem AUI Anschluss des Endgeraetes oder der Der AT-210T/AT-210TS wird direkt mit dem AUI Anschluss des Endgeraetes oder der Workstation verbunden. Stecken Sie den Transceiver in die 15-Pin-Busche des Endg-
Workstation verbunden. Stecken Sie den Transceiver in die 15-Pin-Busche des Endg- Workstation verbunden. Stecken Sie den Transceiver in die 15-Pin-Busche des Endg- Workstation verbunden. Stecken Sie den Transceiver in die 15-Pin-Busche des Endg- eraetes und lassen Sie den Stecker einrasten. Schalten Sie den Rechner ein und
eraetes und lassen Sie den Stecker einrasten. Schalten Sie den Rechner ein und eraetes und lassen Sie den Stecker einrasten. Schalten Sie den Rechner ein und eraetes und lassen Sie den Stecker einrasten. Schalten Sie den Rechner ein und kontrollieren Sie die Poweranzeige. Ueberzeugen Sie sich davon, dass der SQE
kontrollieren Sie die Poweranzeige. Ueberzeugen Sie sich davon, dass der SQE kontrollieren Sie die Poweranzeige. Ueberzeugen Sie sich davon, dass der SQE kontrollieren Sie die Poweranzeige. Ueberzeugen Sie sich davon, dass der SQE Testschalter Ihren Anforderungen entsprechend eingestellt ist. Stecken Sie jetzt den
Testschalter Ihren Anforderungen entsprechend eingestellt ist. Stecken Sie jetzt den Testschalter Ihren Anforderungen entsprechend eingestellt ist. Stecken Sie jetzt den Testschalter Ihren Anforderungen entsprechend eingestellt ist. Stecken Sie jetzt den RJ45 Stecker des UTP Kabels in die dafuer vorgesehene Busche des AT-210T Trans-
RJ45 Stecker des UTP Kabels in die dafuer vorgesehene Busche des AT-210T Trans- RJ45 Stecker des UTP Kabels in die dafuer vorgesehene Busche des AT-210T Trans- RJ45 Stecker des UTP Kabels in die dafuer vorgesehene Busche des AT-210T Trans- ceivers. Vergewissern Sie sich, dass die Link LED die Einsatzbereitschaft auch des
ceivers. Vergewissern Sie sich, dass die Link LED die Einsatzbereitschaft auch des ceivers. Vergewissern Sie sich, dass die Link LED die Einsatzbereitschaft auch des ceivers. Vergewissern Sie sich, dass die Link LED die Einsatzbereitschaft auch des Geraetes am anderen Ende der Uebertragungsstrecke anzeigt. Die Stationen koen-
Geraetes am anderen Ende der Uebertragungsstrecke anzeigt. Die Stationen koen- Geraetes am anderen Ende der Uebertragungsstrecke anzeigt. Die Stationen koen- Geraetes am anderen Ende der Uebertragungsstrecke anzeigt. Die Stationen koen- nen miteinander kommunizieren, wenn die Dioden beider AT-210T Transceiver ord-
nen miteinander kommunizieren, wenn die Dioden beider AT-210T Transceiver ord- nen miteinander kommunizieren, wenn die Dioden beider AT-210T Transceiver ord- nen miteinander kommunizieren, wenn die Dioden beider AT-210T Transceiver ord- nungsgemaess arbeiten. Fuenf LEDs sehen Power, Link, Polarity und SQE Status
nungsgemaess arbeiten. Fuenf LEDs sehen Power, Link, Polarity und SQE Status nungsgemaess arbeiten. Fuenf LEDs sehen Power, Link, Polarity und SQE Status nungsgemaess arbeiten. Fuenf LEDs sehen Power, Link, Polarity und SQE Status Informationen vor. Ist ein weiterer AT-210T am anderen Ende der Leitung angeschlos-
Informationen vor. Ist ein weiterer AT-210T am anderen Ende der Leitung angeschlos- Informationen vor. Ist ein weiterer AT-210T am anderen Ende der Leitung angeschlos- Informationen vor. Ist ein weiterer AT-210T am anderen Ende der Leitung angeschlos- sen, muss das UTP Kabel gekreutz werden, d.h. TD+ und TD- Signale muessen mit
sen, muss das UTP Kabel gekreutz werden, d.h. TD+ und TD- Signale muessen mit sen, muss das UTP Kabel gekreutz werden, d.h. TD+ und TD- Signale muessen mit sen, muss das UTP Kabel gekreutz werden, d.h. TD+ und TD- Signale muessen mit RD+ and RD- Signalen getauscht werden. Verkabelungsgrundlage ist ein 100 Ω UTP
RD+ and RD- Signalen getauscht werden. Verkabelungsgrundlage ist ein 100 Ω UTP RD+ and RD- Signalen getauscht werden. Verkabelungsgrundlage ist ein 100 Ω UTP RD+ and RD- Signalen getauscht werden. Verkabelungsgrundlage ist ein 100 Ω UTP Kabel 22 bis 26 AWG (0.4 - 0.6mm). Die IEEE 802.3 Spezifikation begrenzt ein UTP
Kabel 22 bis 26 AWG (0.4 - 0.6mm). Die IEEE 802.3 Spezifikation begrenzt ein UTP Kabel 22 bis 26 AWG (0.4 - 0.6mm). Die IEEE 802.3 Spezifikation begrenzt ein UTP Kabel 22 bis 26 AWG (0.4 - 0.6mm). Die IEEE 802.3 Spezifikation begrenzt ein UTP Link Segment auf max. 100 m (328 ft.).
Link Segment auf max. 100 m (328 ft.). Link Segment auf max. 100 m (328 ft.). Link Segment auf max. 100 m (328 ft.).
PN 613-10432-00 Rev. A PN 613-10432-00 Rev. A PN 613-10432-00 Rev. A PN 613-10432-00 Rev. A

| | |
Allied Telesyn International, Corp. Limited Warranty Allied Telesyn International, Corp. Limited Warranty Allied Telesyn International, Corp. Limited Warranty Allied Telesyn International, Corp. Limited Warranty
Allied Telesyn International, Corp. (ATI) warrants to the original consumer/purchaser that Allied Telesyn International, Corp. (ATI) warrants to the original consumer/purchaser that Allied Telesyn International, Corp. (ATI) warrants to the original consumer/purchaser that Allied Telesyn International, Corp. (ATI) warrants to the original consumer/purchaser that
each of its products, and all components thereof will be free from defects in materials and/ each of its products, and all components thereof will be free from defects in materials and/ each of its products, and all components thereof will be free from defects in materials and/ each of its products, and all components thereof will be free from defects in materials and/
or workmanship for 5 years (for the Micro Transceiver series of Products) from the original or workmanship for 5 years (for the Micro Transceiver series of Products) from the original or workmanship for 5 years (for the Micro Transceiver series of Products) from the original or workmanship for 5 years (for the Micro Transceiver series of Products) from the original
date of purchase. Any warranty hereunder is extended to the original consumer/purchaser date of purchase. Any warranty hereunder is extended to the original consumer/purchaser date of purchase. Any warranty hereunder is extended to the original consumer/purchaser date of purchase. Any warranty hereunder is extended to the original consumer/purchaser
and is not assignable. and is not assignable. and is not assignable. and is not assignable.
In the event of a malfunction or other indication of product failure attributable directly to In the event of a malfunction or other indication of product failure attributable directly to In the event of a malfunction or other indication of product failure attributable directly to In the event of a malfunction or other indication of product failure attributable directly to
faulty workmanship and/or materials, ATI will, at its option, repair or replace the defective faulty workmanship and/or materials, ATI will, at its option, repair or replace the defective faulty workmanship and/or materials, ATI will, at its option, repair or replace the defective faulty workmanship and/or materials, ATI will, at its option, repair or replace the defective
products or components at no additional charge as set forth herein. Repair or replacement products or components at no additional charge as set forth herein. Repair or replacement products or components at no additional charge as set forth herein. Repair or replacement products or components at no additional charge as set forth herein. Repair or replacement
product will be furnished on an exchange basis and will be either reconditioned or new at the product will be furnished on an exchange basis and will be either reconditioned or new at the product will be furnished on an exchange basis and will be either reconditioned or new at the product will be furnished on an exchange basis and will be either reconditioned or new at the
option of ATI. All replacement parts become the property of ATI. This limited warranty does option of ATI. All replacement parts become the property of ATI. This limited warranty does option of ATI. All replacement parts become the property of ATI. This limited warranty does option of ATI. All replacement parts become the property of ATI. This limited warranty does
not include service or repair damage to the product resulting from accident, disaster, misuse, not include service or repair damage to the product resulting from accident, disaster, misuse, not include service or repair damage to the product resulting from accident, disaster, misuse, not include service or repair damage to the product resulting from accident, disaster, misuse,
neglect or modification of the product. neglect or modification of the product. neglect or modification of the product. neglect or modification of the product.
Service under this warranty may be obtained by returning the product to ATI, and only after Service under this warranty may be obtained by returning the product to ATI, and only after Service under this warranty may be obtained by returning the product to ATI, and only after Service under this warranty may be obtained by returning the product to ATI, and only after
receiving authorization by ATI by issuance of a Return Material Authorization (RMA) number, receiving authorization by ATI by issuance of a Return Material Authorization (RMA) number, receiving authorization by ATI by issuance of a Return Material Authorization (RMA) number, receiving authorization by ATI by issuance of a Return Material Authorization (RMA) number,
with shipping charges prepaid, in the original shipping container or like container, and with with shipping charges prepaid, in the original shipping container or like container, and with with shipping charges prepaid, in the original shipping container or like container, and with with shipping charges prepaid, in the original shipping container or like container, and with
proof of date of purchase included with the returned product. The RMA number MUST be proof of date of purchase included with the returned product. The RMA number MUST be proof of date of purchase included with the returned product. The RMA number MUST be proof of date of purchase included with the returned product. The RMA number MUST be
marked clearly visible on the outside of the shipping container. Any material returned without marked clearly visible on the outside of the shipping container. Any material returned without marked clearly visible on the outside of the shipping container. Any material returned without marked clearly visible on the outside of the shipping container. Any material returned without
such RMA markings shall be rejected and returned to sender unopened. There shall be no such RMA markings shall be rejected and returned to sender unopened. There shall be no such RMA markings shall be rejected and returned to sender unopened. There shall be no such RMA markings shall be rejected and returned to sender unopened. There shall be no
warranty for either parts or labor after the expiration date of 5 years (for the Micro warranty for either parts or labor after the expiration date of 5 years (for the Micro warranty for either parts or labor after the expiration date of 5 years (for the Micro warranty for either parts or labor after the expiration date of 5 years (for the Micro
Transceiver Series of Products) from the original date of purchase, unless the original Transceiver Series of Products) from the original date of purchase, unless the original Transceiver Series of Products) from the original date of purchase, unless the original Transceiver Series of Products) from the original date of purchase, unless the original
consumer/purchaser has purchased an Extended Warranty. Warranty beyond the fifth year consumer/purchaser has purchased an Extended Warranty. Warranty beyond the fifth year consumer/purchaser has purchased an Extended Warranty. Warranty beyond the fifth year consumer/purchaser has purchased an Extended Warranty. Warranty beyond the fifth year
is subject to the terms of the extended warranty program purchased. is subject to the terms of the extended warranty program purchased. is subject to the terms of the extended warranty program purchased. is subject to the terms of the extended warranty program purchased.
Products will be returned to the consumer after repair or replacement has been completed Products will be returned to the consumer after repair or replacement has been completed Products will be returned to the consumer after repair or replacement has been completed Products will be returned to the consumer after repair or replacement has been completed
and by the carrier and method of delivery chosen by ATI, to any destination within the United and by the carrier and method of delivery chosen by ATI, to any destination within the United and by the carrier and method of delivery chosen by ATI, to any destination within the United and by the carrier and method of delivery chosen by ATI, to any destination within the United
States of America. If the customer desires some other specific form of conveyance, or it is States of America. If the customer desires some other specific form of conveyance, or it is States of America. If the customer desires some other specific form of conveyance, or it is States of America. If the customer desires some other specific form of conveyance, or it is
located beyond the U.S.A. borders, then the consumer shall bear the cost of the return located beyond the U.S.A. borders, then the consumer shall bear the cost of the return located beyond the U.S.A. borders, then the consumer shall bear the cost of the return located beyond the U.S.A. borders, then the consumer shall bear the cost of the return
shipment. shipment. shipment. shipment.
ATI MAKES NO EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ATI MAKES NO EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ATI MAKES NO EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ATI MAKES NO EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR
PURPOSE, EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL PURPOSE, EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL PURPOSE, EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL PURPOSE, EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL
ATI BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, COSTS, OR EXPENSES ATI BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, COSTS, OR EXPENSES ATI BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, COSTS, OR EXPENSES ATI BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, COSTS, OR EXPENSES
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE
PRODUCT DELIVERED HEREUNDER. PRODUCT DELIVERED HEREUNDER. PRODUCT DELIVERED HEREUNDER. PRODUCT DELIVERED HEREUNDER.
Some governments do not allow the exclusion or limitation of incidental or consequential Some governments do not allow the exclusion or limitation of incidental or consequential Some governments do not allow the exclusion or limitation of incidental or consequential Some governments do not allow the exclusion or limitation of incidental or consequential
damages for consumer products, so the above limitation of exclusion may not apply to you. damages for consumer products, so the above limitation of exclusion may not apply to you. damages for consumer products, so the above limitation of exclusion may not apply to you. damages for consumer products, so the above limitation of exclusion may not apply to you.
U.S. FEDERAL COMMUNICATIONS COMMISSION U.S. FEDERAL COMMUNICATIONS COMMISSION U.S. FEDERAL COMMUNICATIONS COMMISSION U.S. FEDERAL COMMUNICATIONS COMMISSION
Note: This equipment has been tested and found to comply with the limits for a Class A digital Note: This equipment has been tested and found to comply with the limits for a Class A digital Note: This equipment has been tested and found to comply with the limits for a Class A digital Note: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial protection against harmful interference when the equipment is operated in a commercial protection against harmful interference when the equipment is operated in a commercial protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, environment. This equipment generates, uses, and can radiate radio frequency energy and, environment. This equipment generates, uses, and can radiate radio frequency energy and, environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful if not installed and used in accordance with the instruction manual, may cause harmful if not installed and used in accordance with the instruction manual, may cause harmful if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is interference to radio communications. Operation of this equipment in a residential area is interference to radio communications. Operation of this equipment in a residential area is interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the likely to cause harmful interference in which case the user will be required to correct the likely to cause harmful interference in which case the user will be required to correct the likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense. interference at his own expense. interference at his own expense. interference at his own expense.
CANADIAN DEPARTMENT OF COMMUNICATIONS CANADIAN DEPARTMENT OF COMMUNICATIONS CANADIAN DEPARTMENT OF COMMUNICATIONS CANADIAN DEPARTMENT OF COMMUNICATIONS
This digital apparatus does not exceed the Class A limits for radio noise emissions from This digital apparatus does not exceed the Class A limits for radio noise emissions from This digital apparatus does not exceed the Class A limits for radio noise emissions from This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus as set out in the radio interference regulations of the Canadian Department digital apparatus as set out in the radio interference regulations of the Canadian Department digital apparatus as set out in the radio interference regulations of the Canadian Department digital apparatus as set out in the radio interference regulations of the Canadian Department
of Communications. of Communications. of Communications. of Communications.
Lé présent appareil numérique n’émet pas de bruits radio électriques dépassent les limites Lé présent appareil numérique n’émet pas de bruits radio électriques dépassent les limites Lé présent appareil numérique n’émet pas de bruits radio électriques dépassent les limites Lé présent appareil numérique n’émet pas de bruits radio électriques dépassent les limites
applicables aux appareils numériques de Classe A prescrites dans le réglement sur le applicables aux appareils numériques de Classe A prescrites dans le réglement sur le applicables aux appareils numériques de Classe A prescrites dans le réglement sur le applicables aux appareils numériques de Classe A prescrites dans le réglement sur le
brouillage radio électrique édicté par le ministére des Communications du Canada. brouillage radio électrique édicté par le ministére des Communications du Canada. brouillage radio électrique édicté par le ministére des Communications du Canada. brouillage radio électrique édicté par le ministére des Communications du Canada.
UNDERWRITERS LABORATORIES UNDERWRITERS LABORATORIES UNDERWRITERS LABORATORIES UNDERWRITERS LABORATORIES
Caution: U.L. listed for use in other Environmental Air Spaces in Accordance with Article Caution: U.L. listed for use in other Environmental Air Spaces in Accordance with Article Caution: U.L. listed for use in other Environmental Air Spaces in Accordance with Article Caution: U.L. listed for use in other Environmental Air Spaces in Accordance with Article
300-22 (c) of the U.S.A. National Electrical Code. (Product is not Plenum Rated.) These 300-22 (c) of the U.S.A. National Electrical Code. (Product is not Plenum Rated.) These 300-22 (c) of the U.S.A. National Electrical Code. (Product is not Plenum Rated.) These 300-22 (c) of the U.S.A. National Electrical Code. (Product is not Plenum Rated.) These
products have to be installed in accordance with Local and National Electrical Codes. products have to be installed in accordance with Local and National Electrical Codes. products have to be installed in accordance with Local and National Electrical Codes. products have to be installed in accordance with Local and National Electrical Codes.
BESCHEINIGUNG DES HERSTELLERS/IMPORTEURS BESCHEINIGUNG DES HERSTELLERS/IMPORTEURS BESCHEINIGUNG DES HERSTELLERS/IMPORTEURS BESCHEINIGUNG DES HERSTELLERS/IMPORTEURS
Hiermit wird bescheinigt, dass der AT-210T Micro Transceiver in Uebereinstimmung mit den Hiermit wird bescheinigt, dass der AT-210T Micro Transceiver in Uebereinstimmung mit den Hiermit wird bescheinigt, dass der AT-210T Micro Transceiver in Uebereinstimmung mit den Hiermit wird bescheinigt, dass der AT-210T Micro Transceiver in Uebereinstimmung mit den
Bestimmungen der Vfg. 1046/1984 funk-entstoert ist. Der Deutschen Bundespost wurde das Bestimmungen der Vfg. 1046/1984 funk-entstoert ist. Der Deutschen Bundespost wurde das Bestimmungen der Vfg. 1046/1984 funk-entstoert ist. Der Deutschen Bundespost wurde das Bestimmungen der Vfg. 1046/1984 funk-entstoert ist. Der Deutschen Bundespost wurde das
Inverkehrbringen dieses Geraetes angezeit und die Berechtigung zur Ueberpruefung der Inverkehrbringen dieses Geraetes angezeit und die Berechtigung zur Ueberpruefung der Inverkehrbringen dieses Geraetes angezeit und die Berechtigung zur Ueberpruefung der Inverkehrbringen dieses Geraetes angezeit und die Berechtigung zur Ueberpruefung der
Serie auf Einhaltung der Bestimmungen eingeraeumt. Von Benutzer zusammengestellte Serie auf Einhaltung der Bestimmungen eingeraeumt. Von Benutzer zusammengestellte Serie auf Einhaltung der Bestimmungen eingeraeumt. Von Benutzer zusammengestellte Serie auf Einhaltung der Bestimmungen eingeraeumt. Von Benutzer zusammengestellte
Systeme, die dieses Geraet beihalten, muessen den Bestimmungen von Vfg 1046/1984 Systeme, die dieses Geraet beihalten, muessen den Bestimmungen von Vfg 1046/1984 Systeme, die dieses Geraet beihalten, muessen den Bestimmungen von Vfg 1046/1984 Systeme, die dieses Geraet beihalten, muessen den Bestimmungen von Vfg 1046/1984
entsprechen. entsprechen. entsprechen. entsprechen.
For more information on ATI products available today and in the future, contact your local For more information on ATI products available today and in the future, contact your local For more information on ATI products available today and in the future, contact your local For more information on ATI products available today and in the future, contact your local
ATI representative: ATI representative: ATI representative: ATI representative:
Office: USA Germany U.K. Office: USA Germany U.K. Office: USA Germany U.K. Office: USA Germany U.K.
Phone: (800) 424-4284 (+49) 30-435-9000 (+1) 44-865-390001 Phone: (800) 424-4284 (+49) 30-435-9000 (+1) 44-865-390001 Phone: (800) 424-4284 (+49) 30-435-9000 (+1) 44-865-390001 Phone: (800) 424-4284 (+49) 30-435-9000 (+1) 44-865-390001
Fax: (408) 736-0100 (+49) 30-435-70650 (+1) 44-865-390002 Fax: (408) 736-0100 (+49) 30-435-70650 (+1) 44-865-390002 Fax: (408) 736-0100 (+49) 30-435-70650 (+1) 44-865-390002 Fax: (408) 736-0100 (+49) 30-435-70650 (+1) 44-865-390002

Office: France Japan Singapore Office: France Japan Singapore Office: France Japan Singapore Office: France Japan Singapore
Phone: (+33) 1-69-28-16-17 (+81) 3-3443-5640 (+65) 383-3832 Phone: (+33) 1-69-28-16-17 (+81) 3-3443-5640 (+65) 383-3832 Phone: (+33) 1-69-28-16-17 (+81) 3-3443-5640 (+65) 383-3832 Phone: (+33) 1-69-28-16-17 (+81) 3-3443-5640 (+65) 383-3832
Fax: (+33) 1-69-28-37-49 (+81) 3-3443-2443 (+65) 383-3830 Fax: (+33) 1-69-28-37-49 (+81) 3-3443-2443 (+65) 383-3830 Fax: (+33) 1-69-28-37-49 (+81) 3-3443-2443 (+65) 383-3830 Fax: (+33) 1-69-28-37-49 (+81) 3-3443-2443 (+65) 383-3830

RE RE RE RE
LE LE LE LE

CY
B

B
B

CY

CY
CY

LA
LA

LA
LA

CL
CL

CL
CL

RECYC
RECYC

RECYC
RECYC

ABLE
ABLE

ABLE
ABLE

REC REC REC REC

YCLABLE YCLABLE YCLABLE YCLABLE