INDEX OF SHEETS

Sheet No. Description

1 Title Sheet
2 Estimate of Quantities
3-5 Notes & Specifications
6-7 SWPPP
8 Typical Sections
9 Existing Conditions
10 Erosion Control
11-14 Erosion Control Details
15 Proposed Site
16-21 Plan & Profile - CoRd/Phase 1 Site Rd
PROJECT LOCATION 22 Plan & Profile - Storm Sewer
Trenton, Texas 23-31 Cross Sections - CoRd/Phase 1 Site Rd
32 County Rd Culvert Extension
33 Site Road - Pipe Cross Sections
34-40 Details, Standard Plates, & Standard Plans

CR 4450

NORTH

Hw
y
69
TN
RE
M
ai
nl
in
e
OF TE
TE X
A A
T

S
Hw
y
12
1
PRELIMINARY
X
n, T

R
PR
nto
Tre

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Preliminary Design 2024-037 ERB JJC No Scale 10/7/2024
Brookings, SD
605-696-3200 1 40
 Estimate Of Quantities

ESTIMATE OF QUANTITIES

BID ITEM
DESCRIPTION UNIT QUANTITIES
NUMBER

1 Mobilization LS Lump Sum

2 Clearing LS Lump Sum
3 Waste CuYd 8,902
4 Unclassified Excavation CuYd 34,573
5 Undercut CuYd 4,425
6 Placing Topsoil CuYd 4,502
7 Gravel Surfacing Ton 13,500
8 12" RCP, Furnish & Install Ft 1,010
9 12" RCP Flared End, Furnish & Install Each 1
10 18" CMP, Furnish & Install Ft 255
11 18" CMP Flared Ends, Furnish & Install Each 2
12 24" Precast Drop Inlet, Furnish & Install Each 6
13 Neenah Frame & Grate Each 6
14 Traffic Control LS Lump Sum
15 Permanent Seed Mixture Lb 32
16 Mulching Ton 10.3
17 Erosion Control Log Ft 340
18 High Flow Silt Fence Ft 60
19 Woven Geotextile Fabric SqYd 25,500

OF TE
TE X
A A
T

S
PRELIMINARY

R
PR

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Est. of Quantities 2024-037 ERB JJC NO SCALE 10/7/2024
Brookings, SD
605-696-3200 2 40
SCOPE OF WORK CONTRACTOR AUTHORIZATION FORM CORRUGATED METAL PIPE
Work included in these documents will consist of widening CR4450 Avenue from the The "Texas Commission on Environmental Quality - Stormwater General Permit” shall be Corrugated metal pipes shall have 2 2/3-inch X 1/2-inch corrugations for 42-inch and smaller
intersection at N US HWY 69 to approx. 800 ft west and constructing Phase 1 Gravel Site completed by the Contractor or their certified Erosion Control Supervisor after the award of round pipe and 48-inch and smaller arch pipe unless otherwise stated in the plans.
Road. The project includes, but is not limited to: unclassified excavation, grading and the contract. Work may not begin on the project until this form is signed. The form certifies Corrugated metal pipes shall have 3-inch X 1-inch or 5-inch X 1-inch corrugations for 48-inch
shaping, cutting and filling, subgrade preparation, installation of gravel surfacing, storm under penalty of law that the Contractor understands and will comply with the terms and and larger round pipe and 54-inch and larger arch pipe unless otherwise stated in the plans.
sewer/drainage structures. Work includes the installation and maintenance of erosion control conditions of the permit.
devices, including seeding and mulching. The online form can be found at:
https://www.tceq.texas.gov/downloads/permitting/stormwater/general/construction/2023-cgp-txr150000.pdf
Pipe Bedding Material
SPECIFICATIONS Pipe Bedding Material shall conform to the TXDOT Item 464. Bedding and backfilling shall be
Texas Department of Transportation Standard Specifications for Roads and Bridges, Current completed in accordance with TXDOT Specifications.
Edition and Special Provisions, including any "Supplemental Specifications" SITE ACCESS & TEMPORARY TRACKING CONTROL
Site access shall be as agreed upon by the Owner, Engineer and Contractor prior to
FUNDING construction. Construction of temporary drives is the responsibility of the Contractor, and the The granular material shall be free of injurious amounts of organic impurities. All storm sewer
All bidders are hereby informed that this project is being funded entirely by private funds.The location(s) shall be agreed upon prior to installation. Temporary tracking control shall be installed with this project will require pipe bedding. The bedding material shall be included to
private individual reserves the right to reject any and all bids. The Contract and all change installed at the location(s) where construction vehicles and equipment will leave the site and the unit bid price of the respective pipe or structure, and no separate payment will be made
orders must also be approved by signature by the representative(s) funding the project. shall be constructed as to minimize siltation off the site. Temporary drives and tracking for bedding material.
control shall not inhibit existing drainage. Installation of temporary storm water conveyance
CONTRACTOR COOPERATION structures shall be the responsibility of the Contractor. Prior to final grading, all rock from the
Due to the nature of the project, multiple contractors may be on site at the same time. construction entrance(s) shall be removed from the site.
Contractors must cooperate to assure that all projects are completed by their contractually
stipulated completion dates. Contractors shall respect the working environment of other
contractors and communicate to avoid conflicts which would result in delays to the project.

UTILITIES
Utilities indicated on the plans are diagrammatic and shown for the Contractor's convenience TRAFFIC CONTROL
and information. Existing utility locations shown on drawings are approximate. There is no
guarantee that the utilities shown include all such utilities or that the locations indicated are The Contractor completing the grading shall be responsible for all traffic control throughout
exact. Utilities within the limits of the proposed construction are to be adjusted by the Owner the project. Any other contractors working on the project will be responsible for notifying the
unless otherwise indicated on these plans. The Contractor shall contact Texas 811 at 811 (in grading contractor of traffic control concerns. Traffic control shall be properly maintained at
Texas) or 1-800-344-8377 (Out-Of-State) a minimum of 48 hours prior to any underground all locations where work will impede or impair the typical flow of traffic. Temporary signage
work to determine utility locations. shall be maintained as shown in the latest edition of the Manual on Uniform Traffic Control
Devices (MUTCD), unless otherwise noted in these plans. The Contractor is responsible for
The Contractor shall cooperate with and coordinate their efforts to work with the utility providing the public with proper notification in accordance with local requirements and for
companies and their contractors. Each bidder shall be responsible prior to bid letting, for completing any required permits to work within the right-of-way.
determining the effects of utility work on the project work scope and schedule, and shall
account for all such effects in his bid. No consideration will be given to the Contractor after CLEARING
the bid letting on account of utility work done by others.
Clearing shall generally consist of removing and disposing of all trees, shrubs and
WATER SOURCE miscellaneous vegetation within the project limits. All stumps and roots must be removed to a
The Contractor shall not withdraw water with equipment previously used outside the State of depth of 2-feet (minimum) below finished grade. Any downfall or debris from the trees must
Texas without prior approval from the Texas Environmental Office. Thoroughly wash all be removed from the site. Onsite burning or burial of trees is not permitted without written
construction equipment before entering Texas to reduce the risk of invasive species approval from the landowner. Trees may not be burned or buried in the right-of-way.
introduction into the project vicinity.
Scarify & Recompact (1' minimum)
The Contractor shall obtain the necessary permits from the regulatory agencies such as the
Texas Commission on Environmental Quality, Department of Environment and Natural As shown in the typical section(s), the earthen subgrade shall be scarified, moisture
Resources (DENR) and the United States Army Corps of Engineers (COE) prior to executing conditioned, and recompacted to a depth of 1-ft (minimum) below the finished earthen
water extraction activities. subgrade surface. The scarified material or other suitable material, as directed by the
Engineer, shall be moisture conditioned to the specified range (-3% to +3% of optimum
STORM WATER PERMITTING moisture content), and compacted to a minimum density of 95% of maximum dry density.
Construction activities constitute more than 1 acre of earth disturbance. The final surface shall be proof rolled with a loaded tandem truck with a minimum 10-ton
load, as stated in the Grading Operations. All proof rolling will be performed in the presence
Construction activities constitute more than 1 acre of earth disturbance. The Contractor is of the Owner's Representative. Soft or yielding areas will be repaired at the Contractors
required to secure proper Stormwater Permitting. expense prior to any placement of woven geotextile fabric and/or sand subbase.

A major component of the storm water construction permits is development and RCP Storm Sewer
implementation of a Storm Water Pollution Prevention Plan (SWPPP), which is a joint effort
Reinforced concrete pipe (RCP) shall be bell and spigot, and conform to AASHTO M 170 OF TE
and responsibility of Sherman Township and the Contractor. Erosion control measures and TE X
best management practices will be implemented in accordance with the SWPPP. The requirements. The pipe sections shall be adjoined such that the ends are fully entered, and A A
the inner surfaces are reasonably flush and even. RCP shall be constructed in accordance T
SWPPP is a dynamic document and is to be available on-site at all times.

S
with Item 464 of the TXDOT specifications, except as modified herein. RCP shall be Class III
EROSION CONTROL & STORMWATER POLLUTION PREVENTION PLAN (SWPPP) minimum.
An initial Erosion Control Plan and Stormwater Pollution Prevention Plan have been included Pipe damaged during the production, delivery or handling shall be immediately rejected and
in the plans. This plan shall be implemented by the Contractor at the direction of the Owner.
The Contractor shall use Best Management Practices (BMPs), such as silt fence, surface
replaced at the Contractor's expense. PRELIMINARY
roughening, temporary seeding, etc, to provide erosion protection within the project area. Watertight joints are required for all reinforced concrete pipes and manhole drop inlets. RCP

R
PR
Changes to the plan shown device locations will be necessary as the project progresses to shall have flexible watertight gaskets and conform to the requirements of ASTM C1619. All

EE
ensure that adequate protection is being provided at appropriate points to prevent silt from new storm sewer on this project requires Class III reinforced concrete pipe. Payment will be LI
C E NS ED

O
made at the Contract Unit Bid Prices for the various bid items and shall be full compensation

N
entering the storm sewer system and downstream areas. E I

F
for all labor, equipment, materials (including bedding material) and other incidentals required SS G
to complete the work. IO NA L EN
Unit bid items have been provided for the items included in the initial Erosion Control Plan.

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Notes 2024-037 ERB JJC NO SCALE 10/7/2024
Brookings, SD
605-696-3200 3 40
GRADING OPERATIONS Excess topsoil may be used on the fill slopes outside of the road grade or wasted as directed
Water for Embankment will be considered incidental to Unclassified Excavation. by the Engineer. Prior to placing topsoil, all debris and any stones exceeding three (3) inches in
any dimension shall be removed.
Where modified sections are necessary on account of special ditch grades etc., the Contractor
is to move the excavation as called for on the cross section sheets, for the station or stations GEOGRID
for which such modified sections are shown. Geogrid shall be installed at the location(s) indicated on the plans. Storage and placement of
Geogrid shall be in accordance with the manufacturer's recommendations. Products other than
The Contractor may perform grading or surfacing work only during daylight hours unless those indicated on the plans will require prior approval of the Engineer. All Geogrid for this
additional hours are approved by the Project Manager. project shall be TENSAR NX 750 or an approved equal.

All topsoil within the project limits shall be stripped and stockpiled onsite at a location chosen by TESTING
the Contractor and approved by the Engineer and protected in accordance with best
management practices for erosion control. This may include placing High Flow Silt Fence All Quality Control Testing will be provided by the Owner. The Contractor will cooperate.
around the perimeter of the stockpile and/or temporary seeding with an annual species such as
oats or wheat. GRAVEL SURFACING
Gravel Surfacing shall be placed to the dimensions and thickness indicated on the Typical
Excavation and construction of embankments shall be performed in accordance with Section 97 Sections. Gravel Surfacing shall be placed over prepared and approved subgrade as indicated.
of the Standard Specifications. Compaction requirements shall be governed by the Specified
Density Method. All embankments shall be compacted to 97% of maximum dry density with a
moisture content +2% to -3% percent of optimum. Excess moisture in the embankment Gravel Surfacing shall be processed by either road mix or plant mix methods.
material shall be removed by drying operations.
Materials processed by road mix methods shall be windrowed and equalized to the satisfaction
After completing subgrade shaping and compaction, and prior to placement of geogrid fabric of the Engineer prior to placement. The material in the windrow will be limited to the quantity
and gravel surfacing, the Contractor shall contact the Engineer to complete a proof roll of the necessary to construct a maximum 3” compacted layer. Granular material which is dumped on
prepared subgrade. The Contractor shall provide a tandem truck loaded with at least 10 tons of the prepared surface shall be windrowed prior to incorporating additives.
material. Following the proof roll, the Contractor will be required to rework any unstable
subgrade as determined by the Engineer and then proof roll again to prove that the subgrade is
ready for aggregate base course. This process will be repeated as many times as the Engineer Materials processed by plant mix methods shall be fed uniformly into the mixer at a
requires. Base materials shall not be placed until the Engineer is satisfied that the subgrade is predetermined rate. The plant shall be equipped with positive proportioning devices and shall
stable. thoroughly mix the materials. When the material is laid by a spreader, it shall have been
previously processed by a central plant.
SHRINKAGE FACTOR: Embankment -40%
Graveling Surfacing shall be placed in lifts not exceeding 3 inches. Each layer shall be
compacted to the specified density before the next lift is placed and shall be rolled until a
*Place uniform, stable surface is obtained. Gravel Surfacing shall be compacted to a minimum of 95
Exc. *Undercut Waste percent of the maximum dry density as determined by ASTM D698.
Topsoil

16,726 4,425 4,502 8,920 The final rolling of the top surface of the granular materials shall embed as many loose stones
as possible. The finished surface shall be smooth, free from waves, and be within ±0.5% of the
typical section cross slope when measured with a straight edge, stringline, or other suitable
equipment.

TOTAL - TABLE OF UNCLASSIFIED EXCAVATION Gravel Surfacing shall conform with TXDOT Class 5 Aggregate specifications & gradations.

Topsoil Stripping 13,422 CuYd Granular material of which 30% of the particles retained on the No. 4 (4.75 mm) sieve shall
Excavation 16,726 CuYd contain one or more fractured faces.
Undercut 4,425 CuYd
*Unclassified Excavation 34,573 CuYd The fraction passing the No. 200 (75 μm) sieve shall not be greater than 2/3 of the fraction
passing the No. 40 (425 μm) sieve. In no case shall the upper limit specified for the No. 200
*Undercut = 4,425 CuYd (75 μm) sieve be exceeded. OF TE
*Placing Topsoil = 4,502 CuYd TE X
A A
T
All Gravel Surfacing delivered to the job must be accompanied by a printed weight ticket from a

S
* The quantities for these items are in the Estimate of Quantities under their respective bid certified scale in accordance with DOT Requirements.
items. The estimated existing topsoil depth was 6".
** Waste material will be placed as directed by the Owner and Engineer, waste material shall
not be placed in any wetlands or in the road right-of-way.
PRELIMINARY
UNDERCUT

R
PR

EE
As shown in the typical section(s), the earthen subgrade shall be undercut 1.0' below the
LI
C E NS ED

O
finished earthen subgrade surface. The earthen subgrade shall then be scarified and

N
E I

F
recompacted for a depth of 6" below the undercut. The undercut material or other suitable SS G
material, as directed by the Engineer, shall then be replaced and compacted to 97% of IO NA L EN
maximum dry density, +2% to -3% percent of optimum moisture content. Payment for Undercut
will be plans quantity unless additional undercut is ordered by the Engineer.

PLACING TOPSOIL
Topsoil shall be spread evenly and uniformly over the designated areas to a depth of 6”
(minimum). If topsoil is not available in sufficient quantities to cover the designated areas to the
plan depth, the Contractor shall spread the available topsoil as required by the Engineer.

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Notes 2024-037 ERB JJC NO SCALE 10/7/2024
Brookings, SD
605-696-3200 4 40
TEMPORARY SEDIMENT CONTROL FENCE
The temporary sediment control fence fabric provided shall be in accordance with TxDOT
DMS-6230 "Temporary Sediment Control Fence Fabric" . A list of approved fence fabrics can Pure Live Seed
Grass Species
be found at the following website: (PLS) (Pounds/Acre)
https://www.txdot.gov/content/dam/docs/mpl/siltfnce.pdf White Tridens (Guadalupe) .3
Hooded Windmillgrass (Burnet) .3
Temporary Sediment Control Fences shall be placed at the locations that will minimize siltation Little Bluestem (Coastal Plains) 1.5
of adjacent streams, lakes, dams, or drainage areas as noted in the plans and determined by
the Engineer during construction. Florida Paspalum (Harrison) 2.25
Shortspike Windmillgrass (Welder) .2
REMOVE TEMPORARY SEDIMENT CONTROL FENCE Splitbeard Bluestem (Neches) .5
Temporary Sediment Control Fence shall be removed when vegetation is established. Some or Green Sprangletop (Van Horn) .2
all of the temporary fence may be left on the project until vegetation is established.
Halls Panicum (Oso) .1
Sand Dropseed (Taylor) .1
MUCKING TEMPORARY SEDIMENT CONTROL FENCE
Mucking temporary fence shall consist of removing much trapped by the temporary fence and Canada Wildrye (Lavaca) 2.0
spreading the material evenly over the adjacent area to conform to the existing grade. Mucking Total 7.4500
temporary fence shall be incidental to the cost for temporary fence and is considered to be
routine maintenance.

EROSION CONTROL LOGS

Erosion control logs for restraining the flow of runoff and sediment shall be installed at locations
noted in the plans and determined by the Engineer during construction.
The Contractor shall provide certification that the erosion control logs do not contain noxious
weed seeds. Erosion Control Logs must be selected from the TxDOT Erosion Control
Approved Products or Sediment Control Approved Products lists.

PERMANENT SEEDING

The areas to be seeded comprise all newly graded areas within the project limits except for top
of aggregate base course or subballast.

All permanent seed shall be planted in the topsoil at a depth of ¼” to ½”.

All seed broadcast must be raked or dragged in (incorporated) within the top ¼” to ½” of topsoil
when possible. This requirement may be waived by the Engineer during construction when
raking or dragging is deemed not feasible by conventional methods.

Seeding shall conform to Item 164 of the TxDOT Standard Specifications. Seed must meet the
requirements of the Texas Seed Law. Seed Mix will be provided following Geotechnical Survey
completion.

MULCHING (GRASS HAY OR STRAW)

Following permanent seeding, a mulch consisting of grass hay or straw shall be blown on at
the rate of 2.5 tons per acre and punched in on slopes 3:1 and flatter and on 2:1 slopes
where equipment can be operated without rutting the slope due to slippage.

OF TE
Bales with noxious weed contamination will be rejected and the Contractor will be required to TE X
remove the contaminated bales from the project. A A
T

S
PRELIMINARY

R
PR

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Notes 2024-037 ERB JJC NO SCALE 10/7/2024
Brookings, SD
605-696-3200 5 40
STORM WATER POLLUTION PREVENTION PLAN CHECKLIST Wetland Avoidance v Materials Inventory
Will construction and/or erosion and sediment controls impinge on regulated wetlands? The following materials or substances are expected to be present on the site during the
v SITE DESCRIPTION Yes No X If yes, the structural and erosion and sediment controls have been included construction period. These materials will be handled as noted under the headings “EROSION
Project Limits: See Title and Plan Sheets in the total project wetland impacts and have been included in the 404 permit process with the AND SEDIMENT CONTROLS” and “SPILL PREVENTION” (check all that apply).
Project Description: See Title Sheet USACE. Concrete and Portland Cement
Site Map(s): See Title Sheet and Plans Storm Water Management Detergents
Major Soil Disturbing Activities (check all that apply) Storm water management will be handled by temporary controls outlined in “EROSION AND Paints
X Clearing and grubbing SEDIMENT CONTROLS” above, and any permanent controls needed to meet permanent X Metals
X Excavation/borrow storm water management needs in the post construction period. Permanent controls will be Bituminous Materials
X Grading and shaping shown on the plans and noted as permanent. X Petroleum Based Products
X Filling Cleaning Solvents
X Cutting and filling Other Storm Water Controls X Wood
Other (describe): Waste Disposal Cure
Total Project Area: 80.1 acres All liquid waste materials will be collected and stored in sealed metal containers approved Texture
Total Area To Be Disturbed: 8.3 acres by the Owner and/or Engineer. All trash and construction debris from the site will be Chemical Fertilizers
Existing Vegetative Cover: 100 (%) deposited in the approved containers. Containers will be serviced as necessary, and the Other
Soil Properties: AASHTO Soil Classification: CH, CL trash will be hauled to an approved disposal site or licensed landfill. All onsite personnel
Name of Receiving Water Body/Bodies: Unnamed Wetlands will be instructed in the proper procedures for waste disposal, and notices stating proper
practices will be posted in the field office. The general contractor's representative Spill Prevention
v ORDER OF CONSTRUCTION ACTIVITIES responsible for the conduct of work on the site will be responsible for seeing waste disposal Material Management
(Stabilization measures shall be initiated as soon as possible, but in no case later than 14 procedures are followed. Housekeeping
days after the construction activity in that portion of the site has temporarily or permanently Hazardous Waste · Only needed products will be stored on-site by the contractor.
ceased. Initiation of final or temporary stabilization may exceed the 14-day limit if earth All hazardous waste materials will be disposed of in a manner specified by local or state · Except for bulk materials the contractor will store all materials under cover and in
disturbing activities will be resumed within 21 days.) regulations or by the manufacturer. Site personnel will be instructed in these practices, and appropriate containers.
the individual designated as the contractor's on-site representative will be responsible for · Products must be stored in original containers and labeled.
Install erosion control items. seeing that these practices are followed. · Material mixing will be conducted in accordance with the manufacturer's
Remove and stockpile topsoil. Sanitary Waste recommendations.
Grade and shape site as indicated. Portable sanitary facilities will be provided on all construction sites. Sanitary waste will be · When possible, all products will be completely used before properly disposing of the
Install aggregate base course/surfacing as indicated. collected from the portable units in a timely manner by a licensed waste management container off site.
Place topsoil as indicated (minimum 6") on all disturbed areas outside of gravel contractor or as required by any local regulations. · The manufacturer's directions for disposal of materials and containers will be followed.
surfacing. · The contractor's site superintendent will inspect materials storage areas regularly to
Finalize erosion control. v Maintenance and Inspection ensure proper use and disposal.
Maintenance and Inspection Practices · Dust generated will be controlled in an environmentally safe manner.
v EROSION AND SEDIMENT CONTROLS Inspections will be conducted at least one time per week and after a storm event of 0.50 · Vegetation areas not essential to the construction project will be preserved and
(Check all that apply) inches or greater. maintained as noted on the plans.
Stabilization Practices (See Detail Plan Sheets) All controls will be maintained in good working order. Necessary repairs will be initiated
X Temporary or Permanent Seeding within 24 hours of the site inspection report. Hazardous Materials
Sodding Silt fence will be inspected for depth of sediment and for tears in order to ensure the fabric · Products will be kept in original containers unless the container is not resealable.
Planting is securely attached to the posts and that the posts are well anchored. Sediment buildup · Original labels and material safety data sheets will be retained in a safe place to relay
X Mulching (Straw or Cellulose Fiber) will be removed from the silt fence when it reaches 1/3 of the height of the silt fence. important product information.
Erosion Control Blankets or Mats Sediment basins and traps will be checked. Sediment will be removed when depth reaches · If surplus product must be disposed of, manufacturer's label directions for disposal will be
Vegetation Buffer Strips approximately 50 percent of the structure's capacity, and at the conclusion of the followed.
Roughened Surface (e.g. tracking) construction. · Maintenance and repair of all equipment and vehicles involving oil changes, hydraulic
Gabions-Gabion Mattress Check dams will be inspected for stability. Sediment will be removed when depth reaches system drain down, de-greasing operations, fuel tank drain down and removal, and other
Other: ½ the height of the dam. activities which may result in the accidental release of contaminants will be conducted on
All seeded areas will be checked for bare spots, washouts, and vigorous growth free of an impervious surface and under cover during wet weather to prevent the release of
Structural Temporary Erosion and Sediment Controls significant weed infestations. contaminants onto the ground.
X Silt Fence Inspection and maintenance reports will be prepared for each site inspection, this form will · Wheel wash water will be collected and allowed to settle out suspended solids prior to
Straw Bale Check also be used to document changes to the SWPPP. A copy of the completed inspection discharge. Wheel wash water will not be discharged directly into any storm water system
Temporary Berm form will be filed with the SWPPP documents. or storm water treatment system.
Temporary Slope Drain The Owner or Owner's Representative and the contractor's site superintendent are · Potential pH-modifying materials such as: bulk cement, cement kiln dust, fly ash, new
X Straw Wattles or Rolls responsible for inspections. Maintenance, repair activities are the responsibility of the concrete washings, concrete pumping, and mixer washout waters will be collected on site
Diversion Channels/Swales contractor. The Owner or Owner's Representative will complete the inspection and and managed to prevent contamination of storm water runoff.
Channel Liners (TRM) maintenance reports and distribute copies accordingly.
Stone Rip Rap Sheet Product Specific Practices
Rock Check Dams v Non-Storm Water Discharges Petroleum Products
Sediment Traps/Basins The following non-storm water discharges are anticipated during the course of this project All on-site vehicles will be monitored for leaks and receive regular preventive maintenance
Inlet Protection (check all that apply). to reduce the chance of leakage. Petroleum products will be stored in tightly sealed
Outlet Protection Discharges from water line flushing. containers which are clearly labeled.
Surface Inlet Protection Pavement wash-water, where no spills or leaks of toxic or hazardous materials have Paints
Curb Inlet Protection occurred. All containers will be tightly sealed and stored when not required for use. The excess will
Stabilized Construction Entrances Uncontaminated ground water associated with dewatering activities. be disposed of according to the manufacturer's instructions and any applicable state and
Other local regulations.
Concrete Trucks
Contractors will provide designated truck washout areas on the site. These areas must be
self contained and not connected to any storm water outlet of the site. Upon completion of
construction washout areas will be properly stabilized.

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

40
Phase 1 Site Road Plans
SWPPP 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 6
 Spill Control Practices v Construction Changes v CONTACT INFORMATION
In addition to the previous housekeeping and management practices, the following practices When changes are made to the construction project that will require alterations in the temporary Contractor Information:
will be followed for spill prevention and cleanup if needed. erosion controls of the site, the Storm Water Pollution Prevention Plan (SWPPP) will be Prime Contractor Name:
For all hazardous materials stored on site, the manufacturer's recommended methods for amended to provide appropriate protection to disturbed areas, all storm water structures, and Contractor Contact Name:
spill clean up will be clearly posted. Site personnel will be made aware of the procedures adjacent waters. The Owner or Owner's Representative will modify the SWPPP plan and Address:
and the locations of the information and cleanup supplies. drawings to reflect the needed changes. Copies of forms and the SWPPP will be retained in a City: State: Zip:
Appropriate cleanup materials and equipment will be maintained by the contractor in the designated place for review over the course of the project. Office Phone:
materials storage area on-site. As appropriate, equipment and materials may include items Cell Phone: Fax:
such as brooms, dust pans, mops, rags, gloves, goggles, kitty litter, sand, sawdust, and v CERTIFICATIONS
plastic and metal trash containers specifically for clean up purposes. Certification of Compliance with Federal, State, and Local Regulations Owner
All spills will be cleaned immediately after discovery and the materials disposed of properly. The Storm Water Pollution Prevention Plan (SWPPP) for this project reflects the requirements of Name: GCC
The spill area will be kept well ventilated and personnel will wear appropriate protective all local municipal jurisdictions for storm water management and sediment and erosion control Address:
clothing to prevent injury from contact with a hazardous substance. as established by ordinance, as well as other state and federal requirements for sediment and City: State: Zip:
After a spill a report will be prepared describing the spill, what caused it, and the cleanup erosion control plans, permits, notices or documentation as appropriate. Office Phone:
measures taken. The spill prevention plan will be adjusted to include measures to prevent Cell Phone:
this type of spill from reoccurring, as well as clean up instructions in the event of Owner - GCC
reoccurrences. I certify under penalty of law that this document and all attachments were prepared under my Project Engineer
The contractor's site superintendent, responsible for day-to-day operations, will be the spill direction or supervision in accordance with a system designed to assure that qualified personnel Name: Civil Design Inc (Jeff Cooley)
prevention and cleanup coordinator. The contractor is responsible for ensuring that the site properly gather and evaluate the information submitted. Based on my inquiry of the person or Business Address: 609 Main Ave South
superintendent has had appropriate training for hazardous materials handling, spill persons who manage the system, or those persons directly responsible for gathering the City: Brookings State: SD Zip: 57006
management, and cleanup. information, the information submitted is, to the best of my knowledge and belief, true, accurate, Office Phone: (605) 696-3200
Spill Response and complete. I am aware that there are significant penalties for submitting false information, Cell Phone: (605) 695-5377 Fax: (605) 696-3220
The primary objective in responding to a spill is to quickly contain the material(s) and prevent including the possibility of fine and imprisonment for knowing violations.
or minimize migration into storm water runoff and conveyance systems. If the release has TCEQ Contact Spill Reporting
impacted on-site storm water, it is critical to contain the released materials on-site and prevent Business Hours Monday-Friday 1-800-832-832-8224
their release into receiving waters. If a spill of pollutants threatens storm water or surface
water at the site, the spill response procedures outlined below must be implemented in a ____________________________________________________ National Response Center Hotline
timely manner to prevent the release of pollutants. Authorized Signature (800) 424-8802
The contractor's site superintendent will be notified immediately when a spill or the threat of
a spill is observed. The superintendent will assess the situation and determine the Prime Contractor
appropriate response. This section is to be executed by the General Contractor after the award of the contract. This
If spills represent an imminent threat of escaping erosion and sediment controls and section may be executed any time there is a change in the Prime Contractor of the project.
entering receiving waters, personnel will be directed to respond immediately to contain the
release and notify the superintendent after the situation has been stabilized. I certify under penalty of law that this document and all attachments will be revised or maintained
Spill kits containing appropriate materials and equipment for spill response and cleanup will under my direction or supervision in accordance with a system designed to assure that qualified
be maintained by the contractor at the site. personnel properly gather and evaluate the information submitted. Based on my inquiry of the
If oil sheen is observed on surface water (e.g. settling ponds, detention ponds, swales), person or persons who manage the system, or those persons directly responsible for gathering
action will be taken immediately to remove the material causing the sheen. The contractor the information, the information submitted is, to the best of my knowledge and belief, true,
will use appropriate materials to contain and absorb the spill. The source of the oil sheen accurate, and complete. I am aware that there are significant penalties for submitting false
will also be identified and removed or repaired as necessary to prevent further releases. information, including the possibility of fine and imprisonment for knowing violations.
If a spill occurs the superintendent or the superintendent's designee will be responsible for
completing the spill reporting form and for reporting the spill to TCEQ.
Personnel with primary responsibility for spill response and clean up will receive training by
the contractor's site superintendent or designee. The training must include identifying the ____________________________________________________
location of the spill kits and other spill response equipment and the use of spill response Authorized Signature
materials.
Spill response equipment will be inspected and maintained as necessary to replace any
materials used in spill response activities.

v Spill Notification
In the event of a spill, the contractor's site superintendent will make the appropriate
notification(s), consistent with the following procedures:
A release or spill of a regulated substance (includes petroleum and petroleum products) must
be reported to Texas Commission on Environmental Quality immediately if any one of the
following conditions exists:
The discharge threatens or is in a position to threaten the waters of the state (surface water
or ground water).
The discharge causes an immediate danger to human health or safety.
The discharge exceeds 25 gallons.
The discharge causes a sheen on surface water.

Reporting the release to Department of Health does not meet any obligation for reporting to other
state, local, or federal agencies. Therefore, the responsible person must also contact local
authorities to determine the local reporting requirements for releases. Department of Health
recommends that spills also be reported to the National Response Center at (800) 424-8802.

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

40
Phase 1 Site Road Plans
SWPPP 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 7
 Typical Section

CL CL
South Shoulder Proposed CR 4450 Existing CR4450 North Shoulder

30'

Varies 15' 15' Varies

10' 9'

OHE
ROW
2% Slope 2% Slope 12" Base Course

s Var
rie ies
Va

OHE
Existing Ground
Existing Ground

Onsite Compacted and This Point Is Grade 6" Topsoil

6" Topsoil
Moisture Conditioned Fill On Plan & Profile TENSAR NX 750 Geogrid
Existing OHE
(To Be Relocated) See Specifications
30'
ROW

30' Minimum
CL
Proposed Site Road
(Phase 1)

Varies Varies

2% Slope 2% Slope 12" Base Course

es
Vari Var
ies

This Point Is Grade

On Plan & Profile
TENSAR NX 750 Geogrid Onsite Compacted and
Moisture Conditioned Fill
See Specifications

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Phase 1 Site Road Plans

Preliminary Design 2024-037 ERB JJC NO SCALE 7/5/2024
Brookings, SD
605-696-3200 10 40
 Existing Conditions

N
US
HW
Y
69
Existing 24" RCP Culvert

OH

X
X Existing 18" CMP Culvert
X
X
X (To Be Removed)
Control Point X
X
X
N: 7215178.2 X X
X
E: 2624266.7 X
X

Elev.: 771.3 X
X X
X
X
X
X
X 50
X
CR 44

Control Point
N: 7214980.3
E: 2623924.3
Elev.: 758.1 Property Line
OF TE
TE X
A A
T
S

PRELIMINARY
R
PR

EE

LI
C E NS ED
O

E I
F

SS G Wetland - .09 Ac
IO NA L EN

Wetland - 1.06 Ac

Wetland - .40 Ac
In
d
ia
n
Cr
ee

H
NORT
k

Note: Contractor shall avoid any

disturbance to delineated wetlands

Scale: 1"=200'

100 50 0 100 200

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC 1" = 200' 10/7/2024 Brookings, SD
605-696-3200 9 40
 Erosion Control

Table of Erosion Control Logs

Sta. Rt/Lt
2+00 Lt

4+00 Lt

6+00 Lt

11+00 Rt/Lt

14+00 Rt/Lt

17+00 Rt/Lt

00
20+00 Lt

0+
Install 20' Silt Fence
22+00 Lt

25+00 Lt
Erosion Control Log
Flow Arrow 29+00 Rt/Lt OH

32+00 Rt/Lt
5+00
X
X
X
X
35+00 Rt/Lt X
X
X
X
X
X
X X
X
X

35+00
X
X
X
10+00
X
X
X
X
X
H
NORT

15+00

Scale: 1"=200'

100 50 0 100 200

RC
P 20+
00

RC Install 20' Silt Fence

P
OF TE
TE X
A A
RC
T

30+00

S
P

25+
00

PRELIMINARY
RC

R
PR
P

CM

EE
P
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC 1" = 200' 10/7/2024 Brookings, SD
605-696-3200 10 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

45
TNER Milepost 686.86 to 687.63
Erosion Control Details 2024-037 ERB JJC No Scale 7/1/2024
Brookings, SD
605-696-3200 13
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

45
TNER Milepost 686.86 to 687.63
Erosion Control Details 2024-037 ERB JJC No Scale 7/1/2024
Brookings, SD
605-696-3200 14
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

45
TNER Milepost 686.86 to 687.63
Erosion Control Details 2024-037 ERB JJC No Scale 7/1/2024
Brookings, SD
605-696-3200 15
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

45
TNER Milepost 686.86 to 687.63
Erosion Control Details 2024-037 ERB JJC No Scale 7/1/2024
Brookings, SD
605-696-3200 16
 Proposed Site

N
US
HW
Widen Existing CR4450 Y
69
OH

X
X
X X
X 55' - 18" CMP Replacement
X
X
X
X X
X X
X
X
X X
X
X
X
X 50
X
X
CR 44

Property Line

Phase 1 Site Road

RC
P

OF TE
TE X RC
P
A A Phase 1 Loadout
T
S

RC
P

PRELIMINARY
R
PR

EE

LI RC
P
C E NS ED

CM
O

E I
F

P
SS G
IO NA L EN

Storm Sewer
In
di

H
NORT
an
Cr
ee
k

Scale: 1"=200'

100 50 0 100 200

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC 1" = 200' 10/7/2024 Brookings, SD
605-696-3200 15 40
 Phase 1 Site Road - Plan & Profile

Property Line
Sta. 0+31
Existing 24" RCP Culvert Crossing Note: All Grading between Sta. 0+00 to Sta. 6+70 shall be kept within the existing ROW
(See Storm Sewer Plan Pages)

Sta. 1+33 Remove Trees As Necessary

Existing 18" CMP Culvert Crossing To Complete Grading
Remove & Replace with New - 55' - 18" CMP Overhead Electric
(See Storm Sewer Plan Pages) Catchline (To Be Relocated)
OH
OH R.O.W.
OH
OH
OH

P
OH OH OH

M
OH

C
5+00

C
M
P
CR 4450

P
M
C
30' Roadway Width X X X X
R.O.W.

OF TE
00
TE X
A A
0+ T
S

S
NORTH

PRELIMINARY R
PR

Scale: 1"=50'
EE

Tie Into Existing Hwy 69 Drainage

LI
C E NS ED
O

E I PVI STA:2+66.2
F

SS 25 12.5 0 25 50 PVI STA:7+15.1

G
IO NA L EN PVI ELEV:765.0 PVI ELEV:770.6
K:119.73 K:1231.36
LVC:200.00 LVC:200.00
780 780

BVCS: 6+15.1
EVCE: 766.2
BVCS: 1+66.2

EVCS: 3+66.2
BVCE: 765.4

BVCE: 769.4
VPI STA = 0+00.0
ELEV = 766.1

770 770
1.25%
Lt: 1.75%
-0.42% Finish Grade
Lt: 1.00% VPI STA = 5+66.6
ELEV = 767.8 VPI STA = 6+93.5
Lt: 1.04%
ELEV = 770.0
VPI STA = 2+63.2
760 760
ELEV = 764.8
VPI STA = 1+03.8
ELEV = 763.1

750 750
FG: 766.1
EG: 766.9

EG: 765.3

EG: 764.6

EG: 765.2

EG: 766.4

EG: 767.4

EG: 768.6

EG: 770.3
FG: 769.2
FG: 765.7

FG: 765.3

FG: 765.6

FG: 766.7

FG: 767.9

FG: 770.4
0+00 1+00 2+00 3+00 4+00 5+00 6+00 7+00

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 50'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 16 40
 Phase 1 Site Road - Plan & Profile

Property Line

35+00
Catchline

10+00
Overhead Electric
(To Be Relocated)

30' Roadway Width

R.O.W.
OH OH OH OH OH OH OH OH OH

CR 4450

X X X X 30' Roadway Width

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
R.O.W.
OF TE
TE X
A A NORTH
Overhead Electric T

S
(No Relocation Necessary)

PRELIMINARY Scale: 1"=50'

R
PR

EE
LI 25 12.5 0 25 50
C E NS ED

O
PVI STA:7+15.1 PVI STA:10+80.9

N
E I

F
PVI ELEV:770.6 PVI ELEV:775.8 SS G
K:1231.36 K:44.26 IO NA L EN
LVC:200.00 LVC:96.82
790 790

BVCE: 775.1
EVCS: 8+15.1
EVCE: 772.0

EVCE: 775.4
BVCS: 10+32.5

EVCS: 11+29.3
780 780

Finish Grade
-0.78%
1.41%
Lt: 0.55%

770 Lt: 1.75% 770

VPI STA = 8+77.2
ELEV = 771.8
VPI STA = 10+89.1
ELEV = 773.0

760 760

FG: 774.1
EG: 770.3

EG: 771.9

EG: 773.3

EG: 774.0

EG: 774.4

EG: 774.3

EG: 773.4

EG: 772.3
FG: 773.2
FG: 770.4

FG: 771.8

FG: 774.6

FG: 775.5

FG: 774.8

FG: 773.3
7+00 8+00 9+00 10+00 11+00 12+00 13+00 14+00

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 50'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 17 40
 Phase 1 Site Road - Plan & Profile
P
RC

OF TE
TE X
A A
T
P
RC

S
NORTH

PRELIMINARY
RC
Tr
ac
k1

R
PR
Scale: 1"=50' P

EE
RC
LI
C E NS ED

N
E I

F
25 12.5 0 25 50 SS G
IO NA L EN Tr
ac
k2
Catchline

15+00

30.0' Roadway Width

OH OH OH

PVI STA:15+97.6
PVI ELEV:771.8
K:358.32
LVC:200.00
790 790
BVCS: 14+97.6

EVCS: 16+97.6
BVCE: 772.5

EVCE: 771.5
780 780

Finish Grade

Existing Ground
770 Lt: -0.90% 770

760 760

FG: 771.1
EG: 772.3

EG: 771.3

EG: 770.6

EG: 769.9

EG: 768.7

EG: 768.0
FG: 773.3

FG: 772.5

FG: 771.9

FG: 771.5

FG: 771.3
14+00 15+00 16+00 17+00 18+00 19+00

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 50'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 18 40
 Phase 1 Site Road - Plan & Profile

OF TE
TE X Catchline
A

H
T A

NORT
S

S
PRELIMINARY Scale: 1"=50'

25 12.5 0 25 50
R
PR

EE
LI
C E NS ED
O

E I
F

SS G
IO NA L EN
Proposed Track 2 - TOR
@ Loadout = 770.4
25+00

20+00
RCP
RCP

RCP

RCP RCP
RCP RCP
RCP
RCP RCP RCP Track 2
RCP
RCP 20
See Storm Sewer Plan & Profile Sheet See Storm Sewer Plan & Profile Sheet
Sta. 19+58 - Culvert Crossing
Install 60' - 12" RCP Track 1
(See Storm Sewer Plan Pages)
35

PVI STA:24+49.6
PVI ELEV:769.9
K:956.40
LVC:500.00
780 780

BVCE: 770.4
BVCS: 21+99.6
-0.22% Finish Grade
770 770

Existing Ground
Lt: -0.12%

760 760
VPI STA = 19+57.4
ELEV = 765.2

750 750

EG: 770.1
FG: 771.1
EG: 768.0

EG: 768.4

EG: 768.3

EG: 768.2

EG: 769.0

EG: 769.4
EG: 768.5
FG: 770.9

FG: 770.7

FG: 770.4

FG: 770.3

FG: 770.2

FG: 770.3

FG: 770.4
19+00 20+00 21+00 22+00 23+00 24+00 25+00 26+00

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 50'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 19 40
 Phase 1 Site Road - Plan & Profile

30
+0
0
Catchline

CM
P

CM
P

Sta. 28+26 - Culvert Crossing

Install 200' - 12" CMP
CM
(See Storm Sewer Plan Pages) P

CM
P
NORT
H

CM
25+00 P

Scale: 1"=50'

RCP RCP
25 12.5 0 25 50 RCP
RCP RCP
RCP RCP
PVI STA:24+49.6 OF TE
PVI ELEV:769.9 TE X
A A
K:956.40 T
See Storm Sewer Plan & Profile Sheet

S
LVC:500.00
780 780

EVCS: 26+99.6
EVCE: 770.7
PRELIMINARY

R
PR
Existing Ground

EE
0.30% LI
C E NS ED

N
E I

F
770 Finish Grade 770 SS G
IO NA L EN

Lt: 1.12%
Rt: 1.20%

VPI STA = 28+25.1

760 VPI STA = 28+24.9 760
ELEV = 764.1
ELEV = 763.8

750 750
EG: 770.1

EG: 773.1
EG: 771.0

EG: 771.8

EG: 773.7
FG: 770.4

FG: 770.7

FG: 771.0

FG: 771.3

FG: 771.6
26+00 27+00 28+00 29+00 30+00
CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 50'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 20 40
 Phase 1 Site Road - Plan & Profile

X X
X
X
X
OH

X
X
X
30+00

X
35+00

X
X
CR 4450

X
20' Roadway Width

X
OH

X
X
X
Catchline

X
OF TE

X
TE X
A A

X
T

S
NORTH

X
X
OH

X
PRELIMINARY

X
Scale: 1"=50'

R
PR

EE
25 12.5 0 25 50 LI
C E NS ED

N
E I

F
SS G
IO NA L EN

780 780

VPI STA = 35+32.7

ELEV = 773.2
Existing Ground VPI STA = 35+32.7
ELEV = 772.3
0.30%
Finish Grade
770 770
Lt: 1.16%
Rt: 1.20%

VPI STA = 35+32.7

ELEV = 772.3

760 760

750 750

EG: 773.1

FG: 773.1
EG: 773.7

EG: 774.0

EG: 773.8

EG: 773.6

EG: 772.8
FG: 771.6

FG: 772.2
FG: 771.9

FG: 772.5

FG: 772.8
30+00 31+00 32+00 33+00 34+00 35+00

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 50'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 21 40
 Phase 1 Site Road - Storm Sewer
X
X

0 Plan & Profile

+0

30
X
15

+0
0
X
X
X

H
NORT
Scale: 1"=100'
CM
P
50 25 0 50 100
OH
OF TE
TE X
A A CM
T P
S

25+00

20+00 12 13
10 11 RCP
9
PRELIMINARY 4 RCP
5 6
RCP RCP
7 8 RCP RCP

2 3 RCP
1 RCP Install 24" Precast Drop Inlet
R
PR

RCP RCP Install 24" Precast Drop Inlet

EE

Install 24" Precast Drop Inlet Install Neenah Frame & Grate
LI Install Neenah Frame & Grate
C E NS ED
O

Install 24" Precast Drop Inlet Install Neenah Frame & Grate
N

E I Install 24" Precast Drop Inlet

F

SS Install Neenah Frame & Grate

IO NA L E NG Install 24" Precast Drop Inlet Install Neenah Frame & Grate
Install Neenah Frame & Grate

780 780

TC Drop Inlet TC Drop Inlet TC Drop Inlet TC Drop Inlet TC Drop Inlet
Finish
TC DropGrade
Inlet STA:9+71.6
STA:0+98.6 STA:5+48.6 STA:7+48.4 STA:11+27.3
770 STA:3+48.6 ELEV:767.1 770
ELEV:767.0 ELEV:767.0 ELEV:767.0 ELEV:766.9
ELEV:766.6

155' - 12" RCP @ -0.63%

250' - 12" RCP @ -0.24% 200' - 12" RCP @ 0.26%
200' - 12" RCP @ 0.25% 150' - 12" RCP @ -0.25%
INV ELEV:766.0
INV ELEV:765.4 INV ELEV:766.1
INV ELEV:765.3 INV ELEV:765.5 INV ELEV:765.1
INV ELEV:765.9
INV ELEV:764.9
INV ELEV:764.7
760 760

EG: 771.1
FG: 767.1
EG: 768.7

EG: 767.8

EG: 767.6

EG: 768.0

EG: 768.0

EG: 768.0

EG: 768.2

EG: 768.9

EG: 769.6

EG: 770.4

EG: 770.7
EG: 768.5
FG: 767.0

FG: 767.4

FG: 767.0

FG: 767.0

FG: 767.3

FG: 767.2

FG: 767.3

FG: 767.5

FG: 767.9

FG: 767.2

FG: 767.3

FG: 763.7
1+00 2+00 3+00 4+00 5+00 6+00 7+00 8+00 9+00 10+00 11+00 12+00 13+00

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 100'
V: 1" = 6'
10/7/2024 Brookings, SD
605-696-3200 22 40
 Cross Sections - Co. Rd/Phase 1 Site Road
780

770

760

750

780

770

760

750

780

770

760

750

780

770

760

750
20

20

20

20
0+00.00

2+00.00

3+00.00
1+00.00
0

0
-20

-20

-20

-20
780

770

760

750

780

770

760

750

780

770

760

750

780

770

760

750
OF TE
TE X
A A
T

S
PRELIMINARY

R
PR

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX H: 1" = 20'
609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 23 40
 Cross Sections - Co. Rd/Phase 1 Site Road

780

770

760

750

780

770

760

750

780

770

760

750

780

770

760

750
20

20

20

20
4+00.00

6+00.00
5+00.00

7+00.00
0

0
-20

-20

-20

-20
780

770

760

750

780

770

760

750

780

770

760

750

780

770

760

750
OF TE
TE X
A A
T

S
PRELIMINARY

R
PR

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 20'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 24 40
 Cross Sections - Co. Rd/Phase 1 Site Road

OF TE
TE X
A A
T

790

780

770

760

790

780

770

760

790

780

770

760
S

S
PRELIMINARY

R
PR

60

60

60
EE
LI
C E NS ED
O

N
E I
F

SS G
IO NA L EN

40

40

40
790

780

770

760
20

20

20

20
10+00.00

11+00.00
9+00.00
8+00.00

0
-20

-20

-20

-20
-40

-40

-40

-40
790

780

770

760

790

780

770

760

790

780

770

760

-60
790

780

770

760
CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 20'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 25 40
 Cross Sections - Co. Rd/Phase 1 Site Road

790

780

770

760

790

780

770

760
790

780

770

760

790

780

770

760

60

60
60

60

40

40
40

40

20

20
20

20

14+00.00

15+00.00
12+00.00

13+00.00

0
0

-20

-20
-20

-20

-40

-40
-40

-40
OF TE
TE X
A A
T

-60

-60
-60

-60

S
790

780

770

760

790

780

770

760
790

780

770

760

790

780

770

760

PRELIMINARY

R
PR

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 20'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 26 40
 Cross Sections - Co. Rd/Phase 1 Site Road

790

780

770

760
160
OF TE
TE X
A A
T

140
PRELIMINARY

R
PR

120
EE
LI
C E NS ED
O

N
E I
F
SS G
IO NA L EN

790

780

770

760

790

780

770

760
100

100

100
790

780

770

760

80

80

80
60

60

60

60
40

40

40

40
20

20

20

20

20+00.00
16+00.00

17+00.00

18+00.00

19+00.00
0

0
-20

-20

-20

-20
-40

-40

-40

-40
-60

-60

-60

-60
790

780

770

760

790

780

770

760

790

780

770

760

790

780

770

760
CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 30'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 27 40
 790

780

770

760
Cross Sections - Co. Rd/Phase 1 Site Road

40
790

780

770

760

780

770

760

750
790

780

770

760
60

40
60

20
40

20
40

24+00.00
23+00.00

0
20

0
20

-20
21+00.00

22+00.00

-20
0

-40
-20

-40
-20

-60
-40

-60
-40

-80
-60

-80
-60

-100
790

780

770

760

-100
OF TE
TE X -80
A A
T
S

-120
PRELIMINARY

-120
-100
790E R
PR

780

770

760

LI
E

C E NS ED
O

E I
F

SS G
IO NA L EN

-140
780

770

760

750

790

780

770

760
CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 20'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 28 40
 Cross Sections - Co. Rd/Phase 1 Site Road

790

780

770

760
790

780

770

760

790

780

770

760
790

780

770

760

60
60

60
60

40
40

40
40

20
20

20
20

28+00.00
26+00.00

27+00.00
25+00.00

0
0

0
0

-20
-20

-20
-20

-40
-40

-40
-40

-60
-60

-60
-60

-80
-80

-80
-80

-100
-100

-100
-100

-120
-120

-120
-120

OF TE
TE X
A A

-140
-140

-140
T
-140

S
790

780

770

760
790

780

770

760

790

780

770

760
790

780

770

760

PRELIMINARY

R
PR

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN
780

770

760

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 30'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 29 40
 Cross Sections - Co. Rd/Phase 1 Site Road

790

780

770

760
120

790

780

770

760

790

780

770

760
790

780

770

760

100

100
100
100

80

80
80
80

60

60
60
60

40

40
40
40

20

20
20

31+00.00

32+00.00
30+00.00
20

0
0
29+00.00

-20

-20
-20
-20

-40

-40
-40
-40

-60

-60
-60
-60

790

780

770

760

790

780

770

760
-80
-80

OF TE
TE X

-100
A A
T

S
790

780

770

760
-100

PRELIMINARY

R
PR
-120

EE
LI
C E NS ED

O
790

780

770

760

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 30'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 30 40
 Cross Sections - Co. Rd/Phase 1 Site Road

790

780

770

760
790

780

770

760

790

780

770

760
80
80

80
60
60

60
40
40

40
20
20

20
34+00.00
33+00.00

35+00.00
0
0

0
-20
-20

-20
-40
-40

-40
OF TE
TE X
A A
T
-60
-60

-60

S
PRELIMINARY
790

780

770

760
790

780

770

760

790

780

770

760

R
PR

EE
LI
C E NS ED

N
E I

F
SS G
IO NA L EN

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 20'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 31 40
 County Rd Culvert Extensions
Plan & Profile

O
H
Catch Line

O
H
O
H

Install 55' - 18" CMP

N Inv: 762.4 Sta. 1+33

O
Sta. 0+33 Existing S Inv: 761.8

H
New S Inv: 761.4

CMP
CMP CMP
CMP CMP
CMP

Catch Line

OF TE
TE X
A A

O
T

H
Existing 24" RCP

0+00

S
N Inv: 760.9
S Inv: 760.4

PRELIMINARY

R
PR
N

EE
O
LI

RT
C E NS ED

N
E I

F
H
SS G
IO NA L EN

Scale: 1"=20'

780 780 780

10 5 0 10 20

770 770 770

Ex. Invert Elev = 762.4

760 Ex. Invert Elev = 761.8 760
760 Invert Elev = 761.4

Ex. Invert Elev = 760.4 Ex. Invert Elev = 760.9

750 750 750

-60 -40 -20 0 20 40 -60 -40 -20 0 20

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 20'
V: 1" = 10'
10/7/2024 Brookings, SD
605-696-3200 32 40
 Plan View - Phase 1 Road - Storm Sewer

RCP
RCP
30+00

Track 1
Track 2
RCP
P
CM

20+00

4
P
CM
Sta. 28+26

RCP
P
CM

P
RC
P
CM
Catch Line Sta. 19+58

P
Catch Line CM
RCP

P
RC
P
CM

RCP

k2
60' - 12" RCP - 1 Flared End Sections

P
200' - 18" CMP - 2 Flared Ends

RC

ac
E Inv: 764.8 N Inv: 764.3

Tr
W Inv: 765.2 S Inv: 763.6

1
ck
RCP

a
TH

Tr
P
RC
R
NO

OF TE
TE X

RTH
A A
T

NO

S
Scale: 1"=40'

20 10 0 20 40
Scale: 1"=40' PRELIMINARY

R
PR
20 10 0 20 40

EE
790 790 LI
C E NS ED

N
E I

F
SS G
28+26.05 IO NA L EN
780 780 780 780
T/C Elev = 766.6
770 770 770 770

Invert Elev = 764.8 Invert Elev = 765.2

Invert Elev = 764.3 Invert Elev = 763.6
760 760 760 760

750 750 750 750

-80 -60 -40 -20 0 20 40 -140 -120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120

CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

TNER
Phase 1 Milepost
Site RoadRoad
Site 687.9
Plans
Plans
Preliminary Design 2024-037 ERB JJC
H: 1" = 40'
V: 1" = 40'
10/7/2024 Brookings, SD
605-696-3200 33 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Standard Plates 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 34 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Standard Plates 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 35 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Standard Plates 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 36 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Standard Plates 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 37 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Standard Plates 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 38 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Standard Plates 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 39 40
 CAD Filename: CDI Project No. Drawn By: Checked By: Scale: Date: Sheet No: of No:
GCC - Trenton, TX 609 Main Ave S

Site Road Plans

Standard Plates 2024-037 ERB JJC No Scale 7/5/2024
Brookings, SD
605-696-3200 40 40