0% found this document useful (0 votes)
9 views

case study in networking

Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
9 views

case study in networking

Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

i.

Name the most suitable way to place the server

Answer: Maximum no of computer

ii. Cable layout:

Answer : Use topology ( Mostly it is star topology == server to all buildings)

iii. Suggest the placement of networking device


a. Hub/Switch: In all building/office to connect all the computers
b. Repeaters: In between the building where distance is more than 100 meter to
regenerate signals
c. Modem(Internet connecting device): Should be installed at wing/building that have
maximum no of computer.
d. Firewall ( Hardware/software): A network security device to prevent unauthorized
access

iv. Which communication medium or internet connecting Technology is used for connecting
offices.

Case1: Compromise with cost not with speed (Priority –speed (High))

a. Cable connection – optical fibre


b. Cable connection not possible (Hilly Area ,Long Distance) -Satellite
communication

Case 2: Compromise with speed not with cost (Priority- Cost (low budget))

a. Cable connection – Dial-Up connection or broad band


b. Cable connection not possible (Hilly Area ,Long Distance) -Radiowave/Microwave
communication

v. In case of wireless communication:


a. The best wireless medium is satellite( If cost doesn’t matters)
b. The best wired medium for high speed is optical fibre. If Optical fibre is not given
in options then coaxial cable

Software Development Company has set up its new center at Raipur for its
4
2019 office and web based activities. It has 4 blocks of buildings named Block A,
Block B, Block C, Block D.
(SQP) Number of Computers
Table : Posting
P_ID Department Place
1 History Agra
2 Mathematics Raipur
3 Computer Science Delhi

Shortest distances between various Block s in meters:

(i) Suggest the most suitable place (i.e. block) to house the
server of this company with a suitable reason.
(ii) Suggest the type of network to connect all the blocks with
suitable reason .
(iii)The company is planning to link all the blocks through a secure and hi gh
speed wired medium. Suggest a way to connect all the blocks.
(iv) Suggest the most suitable wired medium for efficiently connecting each
computer installed in every block out of the following network cables:
● Coaxial Cable
● Ethernet Cable
● Single Pair Telephone Cable.
Answer:
i. Block C , It has maximum number of computer.
ii. LAN
iii. Star topology OR Diagram of star topology
iv. Ethernet Cable

MyPace University is setting up its academic blocks at Naya Raipur 5


2020 and is planning to set up a network. The University has 3 academic
(SQP) blocks and one Human Resource Center as shown in the diagram
below:

Center to Center distances between various blocks/center is as follows:


Law Block to business Block 40m
Law block to Technology Block 80m
Law Block to HR center 105m
Business Block to technology
30m
Block
Business Block to HR Center 35m
Technology block to HR center 15m
Number of computers in each of the blocks/Center is as follows:
Law Block 15
Technology Block 40
HR center 115
Business Block 25

a) Suggest the most suitable place (i.e., Block/Center) to install


the server of this University with a suitable reason.
b) Suggest an ideal layout for connecting these blocks/centers for a
wired connectivity.
c) Which device will you suggest to be placed/installed in each
of these blocks/centers to efficiently connect all the
computers within these blocks/centers.
d) Suggest the placement of a Repeater in the
network with justification.
e) The university is planning to connect its admission office in
Delhi, which is more than 1250km from university. Which
type of network out of LAN, MAN, or WAN will be formed?
Justify your answer.
Answer:
38 a. Most suitable place to install the server is HR center, as this center has maximum 5

number of computers.
b.

c. Switch

d. Repeater may be placed when the distance between 2


buildings is more than 100 meter.

e. WAN, as the given distance is more than the range of LAN and MAN.

You might also like