How to Activate Google GPX
Step 1: After Completion the wiring, insert sim card and turn the GPS switch on. GPS lights should be
towards the sky and GPS should not touch any steel, Iron or magnet.
Step 2: Install the App, Carefully Put the User ID and Password.
Step 3: Now Set the Admin Number by, going to app, Click Order > Click Setting Admin Number. Put
your personal number and click submit.
Apps Name is: Cloud Tracking for IOS and Android
Using the App and SMS Commands:
Wait 2 to 5 minutes, you can see the live location on mobile app.
Important SMS Command List
SL Command Format Remark
1 Admin Setup 0171XXX Is your
SOS,A,0171XXXXXXX#
personal number
2 Engine Lock RYLMD,0# Engine Locked
3 Engine Unlock RLYMD,1# Engine Unlocked
4 GPS id check PARAM# Check reply with id
5 Turn Off Vibration call SENALM,OFF# Vibration Call off
Latest SMS command list
Note: English symbols must be used, if the command setting is correct, reply: OK, if the command is not normal: no
reply or the format of the reply command is incorrect
No. Functional items command format Remark
1 address lookup 123 or DW
2 status query STATUS#
3 version query VERSION#
4 Query parameter settings PARAM#
Longitude and latitude
7 WHERE#
position query command
Background server parameter
8 SERVER#
query
9 restart command RESET#
SOS,A, Number 1, Number 2, Number
10 Add SOS number SOS, A,01715XXXXX#
3 #
SOS, D, number 1, number 2, number
11 Delete SOS number
3 #
12 Query SOS number SOS#
The code must be the SOS
13 Add center number CENTER,A,Center Number# number to be set as the
center number
14 delete center number CENTER,D#
HBT,T1,T2#
T1=1 ～ 300 minutes, ACC ON
Heartbeat packet setting
15 heartbeat packet upload interval
interval
T2=1 ～5 minutes, ACC OFF heartbeat
packet upload interval
16 Query the heartbeat packet interval HBT#
TIMER,T 1 ,T2#
T1= 5-18000 seconds; upload
GPS data timing sending Default: TIMER, 10 ,
17 interval in ACC ON state
interval 10 #
T2= 5-18000 seconds ; upload
interval in ACC OFF state
Query GPS data timing sending
18 TIMER#
interval time
DEFENSE, A#
19 Delay fortification setting A: 1 ~ 60 minutes, delay time for
defense
20 Query delay arming time DEFENSE#
SENDS,A#
A=0-300 minutes
twenty
GPS into sleep time 0 means the GPS is always on 1~300 Default: SENDS,3#
one
means the time for the device to go
to sleep when it is still
twenty Query SENSOR to control GPS
SENDS#
two time
RELAY,A#
twenty A=0/1 ; 0 connects the gasoline and
Gasoline control
three electricity, 1 disconnects the Only the center number is
gasoline and electricity authorized
twenty Query the fuel-electric control
RELAY#
four status
SENALM,A,M#
A=ON
Turn on the vibration alarm
25 M=0 ~ 2 ; Alarm reporting method, Default: SENALM,ON,3#
setting
0 only GPRS , 1 SMS+GPRS , 2
GPRS+SMS+CALL ;
26 Turn off vibration alarm SENALM,OFF#
Query the vibration alarm setting
27 SENALM#
parameters
POWERALM, A ,M,T1,T2,#
A=ON
M=0 ～ 2 ; 0 GPRS only , 1
Turn on the power failure Default:
28 SMS+GPRS , 2 GPRS+SMS+CALL
alarm setting POWERALM,ON,3#
T1=2 ~ 60 seconds; power failure
detection time T2=1-3 0 0 seconds;
minimum charging time
29 Turn off power failure alarm POWERALM,OFF#
Query the power failure alarm
30 POWERALM#
status
BATALM,A,M#
A=ON
Turn on the low battery
31 M=0 ～ 1
alarm setting
0 means: GPRS only , 1 means:
SMS+GPRS ,
Turn off the low battery alarm
32 BATALM,OFF#
setting
33 Query the low battery alarm status BATALM#
MOVING,A,R,M#
A=ON
Turn on the displacement
34 R=100 ～ 1000 ;Movement radius
alarm setting
M=0 ～ 2 ; 0 GPRS only , 1
SMS+GPRS ; 2 GPRS+SMS+CALL
35 Turn Off Displacement Alarm MOVING,OFF#
Query the displacement setting
36 MOVING#
status
SPEED,A,B,C,M#
A=ON
B=5 ~ 600 seconds; time range
37 Turn on overspeed alarm C=1 ～ 255km/h ; overspeed
threshold range
M=0 ~ 1 ; Alarm reporting method,
0 only GPRS , 1 SMS+GPRS ;
38 Turn off overspeed alarm SPEED,OFF#
39 Query the overspeed setting status SPEED#
CALLSET # query times
CALLSET ,A# Default: CALLSET ,1#
40 Telephone alarm settings
A=1~5; Number of calls to the police
(for all alarms)
SENSORRANGE# query sensitivity
SENSORRANGE , A# set the sensitivity
A = 1~8; The default is the optimal value. If Default:
41 Vibration Sensitivity Settings
there is no problem, it is not recommended SENSORRANGE ,7#
for users to set it by themselves.
MOVING, A, B , C #
A=ON
B =0 ～ 2 ; 0 GPRS only , 1
SMS+GPRS ; 2 GPRS+SMS+CALL
C = 1 ~ 3;
Default:
42 ACC alarm setting 1 means ACC ON alarm OFF does not
ACCALM,ON,3,1#
report
2 means ACC OFF alarm ON does not
report
3 means ACC ON + ACC OFF alarm
RLYSMSLIMTI ,A#
A=ON
ON means that the oil and
Restrictions on oil and electricity electricity must be the central Default:
43
cut-off text messages number to be disconnected RLYSMSLIMTI,OFF#
OFF means there is no restriction
on oil and electricity cut off
SENSOR,<A>[,B][,C]#
Vibration detection A=10 ～ 300 seconds, detection time Default:
44
time B=10 ~ 300 seconds, alarm delay in SENSOR,10,2,300#
automatic arming mode
C=1-300 minutes, vibration alarm interval
SENSOR# query command
RLYMD, A #
A=0~1
0 means : fuel and electricity cut-
off conditions 1. GPS sleeps and
immediately cuts off fuel and
electricity 2. GPS positioning and
speed <= 20KM/H immediately cuts
off fuel and electricity 3. GPS is
not positioned or positioned and
the speed is greater than 20KM/H.
Wait until the GPS is positioned
and the speed is <=20KM/H to
execute the fuel cut-off command
45 Fuel-electric mode Default: RLYMD, 0 #
1 means: cut off fuel and
electricity conditions 1. GPS is
not positioned or sleep immediately
cut off fuel and electricity 2. GPS
positioning and speed <= 20KM/H
immediately cut off fuel and
electricity 3. GPS positioning and
speed is greater than 20KM/H do not
immediately cut off fuel and
electricity Wait until the GPS
speed <= 20KM/H to execute the fuel
cut-off command
