Wedge Anchor BZ3 for cracked and uncracked concrete

Wedge Anchor BZ3

Steel, zinc plated

Wedge Anchor BZ3

Range of Loading: 3,4 kN–34,3 kN

Range of concrete quality: C20/25–C50/60

Description 1)

Through the combination of the highest approved tensile and shear

loads with variable anchorage depths, the newly developed Wedge UKTA - 22/6211
Option 1 for cracked concrete

Anchor BZ3 with European Technical Assessment, sets standards in R30 - R120

performance and flexibility of mechanical Expansion anchors.

In many cases, with the same setting depth as before, it allows higher
loads, which can be further increased by deeper setting. This can
save fixing points or fastenings can be realized, that have not been
possible with a wedge anchor. However, setting with a reduced – Coloured marking of the minimum anchorage depth
anchorage depth reduces drilling and setting effort and reduces – Shock approval by the Swiss Federal Office for Civil Protection1)
the risk of reinforcement hits. The innovative calculation method in
dependence of anchorage depth and concrete thickness, enables
Applications
smallest spacing and edge distances for the respective application.
Anchoring of medium to heavy loads in cracked and uncracked
This flexibility allows a perfect adaptation to the installation situati-
concrete: columns, steel beams, railings, cable routes, pipe routes,
on and allows more economical fastenings. By optimization of the
wooden constructions, consoles.
material, the geometry and the manufacturing process, performance
Fastenings in earthquake areas etc.
under the influence of earthquakes was significantly increased. Fewer
turns until the tightening torque is reached and a colored marking
of the minimum anchorage depth enable shorter processing times Examples of Installation BZ3:
with higher installation safety.
B
The BZ3 Wedge Anchor also allows the optional use of the HM cap nut. tfix Small effective ancho-
hef
The HM cap nut prevents, due to the closed form, injuries and allows rage depth and small
new design possibilities for architecturally demanding applications. clamping thickness.

Advantages B Small anchorage

– The Wedge Anchor with the highest approved loads and variable hef tfix depth and large,
anchoring depths flexible clamping
thickness.
– European Technical Assessment in cracked and non-crackend
concrete (Option 1), under seismic action of category C1 and C2
B
and for use in fire (R30 - R120) hef tfix Large anchorage
– For higher loads under seismic action, the annular gap between depth and small
the Wedge Anchor BZ3 and the fixture can be filled with MKT fixture thickness.
adhesive, by using the Filling Washer VS
– Low minimum anchorage depths B
– New calculation method in dependence of the anchorage depth hef tfix
and the thickness of the concrete component
Stand-off fastening
– The high flexibility enables the optimal adaptation to the installa-
tion situation for maximum efficiency
– Extra short versions
– Fewer turns until the tightening torque is reached

From standard anchorage depth

1)

... a solid connection 8 2023/24 PR MKT

 Mechanical Heavy Duty Anchors

Wedge Anchor BZ3 Steel, zinc plated

Approved for cracked and uncracked concrete

Variable anchorage depths

Mechanical Heavy Duty Anchors

Standard Minimum Variable
anchorage depth anchorage depth anchorage depth
Description Ref. No. Drill hole-Ø Fixture Anchorage Fixture Anchorage Usable Fixture Depth of Setting Seismic Anchor Thread Pkg. Weight
thickness depth thickness depth length thickness drill hole depth C1 / C2 length content per pkg.
d0 tfix,std hef,std tfix,min hef,min B tfix h1 l
mm mm mm mm mm mm mm mm hnom mm mm pcs. kg
BZ3 M8x60/0-5 20105001 8 - - 5 35 40 B -hef hef + 10 hef + 8 -/- 60 M8x18 100 2,55
BZ3 M8x65/0-10 20110001 8 - - 10 35 45 B -hef hef + 10 hef + 8 3 / 31) 65 M8x23 100 2,71
BZ3 M8x75/0-20 20115001 8 10 45 20 35 55 B -hef hef + 10 hef + 8 3 / 31) 75 M8x33 100 3,01
BZ3 M8x80/0-25 20125001 8 15 45 25 35 60 B -hef hef + 10 hef + 8 3 / 31) 80 M8x38 100 3,17
BZ3 M8x95/0-40 20140001 8 30 45 40 35 75 B -hef hef + 10 hef + 8 3 / 31) 95 M8x53 100 3,64
BZ3 M8x115/5-60 20150001 8 50 45 60 35 95 B -hef hef + 10 hef + 8 3 / 31) 115 M8x73 100 4,36
BZ3 M8x165/55-110 20170001 8 100 45 110 35 145 B -hef hef + 10 hef + 8 3 / 31) 165 M8x123 50 2,96
BZ3 M10x70/0-10 20205001 10 - - 10 40 50 B -hef hef + 11 hef + 9 3/3 70 M10x25 50 2,58
BZ3 M10x80/0-20 20210001 10 - - 20 40 60 B -hef hef + 11 hef + 9 3/3 80 M10x35 50 2,80
BZ3 M10x90/0-30 20215001 10 10 60 30 40 70 B -hef hef + 11 hef + 9 3/3 90 M10x45 50 3,05
BZ3 M10x95/0-35 20220001 10 15 60 35 40 75 B -hef hef + 11 hef + 9 3/3 95 M10x50 50 3,16
BZ3 M10x100/0-40 20225001 10 20 60 40 40 80 B -hef hef + 11 hef + 9 3/3 100 M10x55 50 3,31
BZ3 M10x110/0-50 20230001 10 30 60 50 40 90 B -hef hef + 11 hef + 9 3/3 110 M10x65 50 3,55
BZ3 M10x130/10-70 20235001 10 50 60 70 40 110 B -hef hef + 11 hef + 9 3/3 130 M10x85 50 4,07
BZ3 M10x155/35-95 20250001 10 75 60 95 40 135 B -hef hef + 11 hef + 9 3/3 155 M10x110 50 4,73
BZ3 M10x180/60-120 20260001 10 100 60 120 40 160 B -hef hef + 11 hef + 9 3/3 180 M10x135 50 5,34
BZ3 M12x85/0-10 20305001 12 - - 10 50 60 B -hef hef + 13 hef + 10 3/3 85 M12x29 25 2,16
BZ3 M12x95/0-20 20310001 12 - - 20 50 70 B -hef hef + 13 hef + 10 3/3 95 M12x39 25 2,34
BZ3 M12x105/0-30 20313001 12 10 70 30 50 80 B -hef hef + 13 hef + 10 3/3 105 M12x49 25 2,53
BZ3 M12x110/0-35 20315001 12 15 70 35 50 85 B -hef hef + 13 hef + 10 3/3 110 M12x54 25 2,61
BZ3 M12x115/0-40 20320001 12 20 70 40 50 90 B -hef hef + 13 hef + 10 3/3 115 M12x59 25 2,69
BZ3 M12x125/0-50 20325001 12 30 70 50 50 100 B -hef hef + 13 hef + 10 3/3 125 M12x69 25 2,89
BZ3 M12x145/0-70 20330001 12 50 70 70 50 120 B -hef hef + 13 hef + 10 3/3 145 M12x89 25 3,24
BZ3 M12x160/10-85 20335001 12 65 70 85 50 135 B -hef hef + 13 hef + 10 3/3 160 M12x104 25 3,50
BZ3 M12x180/30-105 20340001 12 85 70 105 50 155 B -hef hef + 13 hef + 10 3/3 180 M12x124 25 3,86
BZ3 M12x200/50-125 20345001 12 105 70 125 50 175 B -hef hef + 13 hef + 10 3/3 200 M12x134 25 4,22
BZ3 M16x105/0-5 20505001 16 - - 5 65 70 B -hef hef + 17 hef + 14 3/3 105 M16x29 20 3,62
BZ3 M16x115/0-15 20510001 16 - - 15 65 80 B -hef hef + 17 hef + 14 3/3 115 M16x39 20 3,88
BZ3 M16x125/0-25 20515001 16 5 85 25 65 90 B -hef hef + 17 hef + 14 3/3 125 M16x49 20 4,14
BZ3 M16x135/0-35 20520001 16 15 85 35 65 100 B -hef hef + 17 hef + 14 3/3 135 M16x59 20 4,41
BZ3 M16x145/0-45 20525001 16 25 85 45 65 110 B -hef hef + 17 hef + 14 3/3 145 M16x69 20 4,65
BZ3 M16x170/0-70 20530001 16 50 85 70 65 135 B -hef hef + 17 hef + 14 3/3 170 M16x94 20 5,38
BZ3 M16x200/5-100 20535001 16 80 85 100 65 165 B -hef hef + 17 hef + 14 3/3 200 M16x124 10 3,08

Seismic C1 and C2 for anchorage depth hef ≥ 40mm

1)

Cap nut HM Steel zinc plated, extra high design

For visually demanding requirements

Protection against injuries

Description Ref. No. Thread Cap nut height Width across nut Suitable for Package content Weight per pkg.
mm SW pcs. kg
Cap nut HM M10 56102101 M10 22,0 17 BZ3 M10 20 0,48
Cap nut HM M12 56122101 M12 26,5 19 BZ3 M12 20 0,69

2023/24 PR MKT 9 ... a solid connection

Wedge Anchor BZ3 for cracked and uncracked concrete

Wedge Anchor BZ3-U Steel, zinc plated

With large washer DIN EN ISO 7093-1 (DIN 9021)

Approved for cracked and uncracked concrete

Variable anchorage depths

Standard Minimum Variable

anchorage depth anchorage depth anchorage depth
Description Ref. No. Drill Fixture Anchorage Fixture Anchorage Usable Fixture Depth of Setting Seismic Anchor Washer2) Thread Pkg. Weight
hole-Ø thickness depth thickness depth length thickness drill hole depth C1 / C2 length content per pkg.
d0 tfix,std hef,std tfix,min hef,min B tfix h1 l
mm mm mm mm mm mm mm mm hnom mm mm pcs. kg
BZ3-U M8x65/0-10 20110301 8 - - 10 35 45 B -hef hef + 10 hef + 8 3 / 31) 65 24x2 M8x23 100 2,71
BZ3-U M8x75/0-20 20115301 8 10 45 20 35 55 B -hef hef + 10 hef + 8 3 / 31) 75 24x2 M8x33 100 3,01
BZ3-U M8x80/0-25 20125301 8 15 45 25 35 60 B -hef hef + 10 hef + 8 3 / 31) 80 24x2 M8x38 100 3,17
BZ3-U M10x70/0-10 20205301 10 - - 10 40 50 B -hef hef + 11 hef + 9 3/3 70 30x2,5 M10x25 50 2,58
BZ3-U M10x80/0-20 20210301 10 - - 20 40 60 B -hef hef + 11 hef + 9 3/3 80 30x2,5 M10x35 50 2,80
BZ3-U M10x90/0-30 20215301 10 10 60 30 40 70 B -hef hef + 11 hef + 9 3/3 90 30x2,5 M10x45 50 3,05
BZ3-U M10x95/0-35 20220301 10 15 60 35 40 75 B -hef hef + 11 hef + 9 3/3 95 30x2,5 M10x50 50 3,10
BZ3-U M10x100/0-40 20225301 10 20 60 40 40 80 B -hef hef + 11 hef + 9 3/3 100 30x2,5 M10x55 50 3,31
BZ3-U M10x110/0-50 20230301 10 30 60 50 40 90 B -hef hef + 11 hef + 9 3/3 110 30x2,5 M10x65 50 3,55
BZ3-U M10x130/10-70 20235301 10 50 60 70 40 110 B -hef hef + 11 hef + 9 3/3 130 30x2,5 M10x85 50 4,07
BZ3-U M12x85/0-10 20305301 12 - - 10 50 60 B -hef hef + 13 hef + 10 3/3 85 37x3 M12x29 25 2,16
BZ3-U M12x95/0-20 20310301 12 - - 20 50 70 B -hef hef + 13 hef + 10 3/3 95 37x3 M12x39 25 2,34
BZ3-U M12x105/0-30 20313301 12 10 70 30 50 80 B -hef hef + 13 hef + 10 3/3 105 37x3 M12x49 25 2,53
BZ3-U M12x115/0-40 20320301 12 20 70 40 50 90 B -hef hef + 13 hef + 10 3/3 115 37x3 M12x59 25 2,69
BZ3-U M12x125/0-50 20325301 12 30 70 50 50 100 B -hef hef + 13 hef + 10 3/3 125 37x3 M12x69 25 2,89
BZ3-U M16x145/0-45 20525301 16 25 85 45 65 110 B -hef hef + 17 hef + 14 3/3 145 50x3 M16x69 20 4,65
BZ3-U M16x170/0-70 20530301 16 50 85 70 65 135 B -hef hef + 17 hef + 14 3/3 170 50x3 M16x94 20 5,38
1)
Seismic C1 and C2 for anchorage depth hef ≥ 40mm
2)
Outer diameter x thickness

Wedge Anchor-Setting Tool Setting Tool for Wedge Anchor M6 – M16

BSW
With SDS plus connection

Description Ref. No. Suitable for Length Package content Weight per pkg.
Wedge Anchor mm pcs kg
BSW M6-M16 43990101 BZ3/BZ plus/B M6 – M16 140 1 0,13

... a solid connection 10 2023/24 PR MKT

 Mechanical Heavy Duty Anchors

Extract from Permissible Service Conditions of European Technical Assessment ETA-19/0619 for use in
cracked and uncracked concrete (Option 1)
Approved loads according to EN 1992-4 for single anchors without the influence of spacing and edge distances. The total safety factor
(γM und γF) is included. Load capacities under fire exposure see page 196.
Loads and performance data Wedge Anchor BZ3 M8 M10 M12 M16

Mechanical Heavy Duty Anchors

Minimum anchorage depth1) hef,min [mm] 35 40 50 65
Standard anchorage depth hef,std [mm] 45 60 70 85
Maximum anchorage depth hef,max [mm] 90 100 125 160
cracked concrete
Mean ultimate loads, tension C20/25 NRu,m [kN] 10,0 12,2 - 16,4 21,6 - 18,0 27,0 - 29,4 43,9 -
Mean ultimate loads, shear C20/25 VRu,m [kN] 17,4 17,4 - 28,4 28,4 - 40,7 40,7 - 67,2 67,2 -
Approved loads, tension C20/25 appr. N [kN] 3,4 4,5 4,5 4,1 7,1 7,1 5,8 9,6 10,5 8,6 12,9 14,3
C25/30 appr. N [kN] 3,8 5,0 5,0 4,6 7,6 7,6 6,5 10,7 11,7 9,6 14,4 15,4
C30/37 appr. N [kN] 4,2 5,4 5,4 5,1 8,0 8,0 7,1 11,8 12,8 10,5 15,7 16,4
C40/50 appr. N [kN] 4,8 6,1 6,1 5,9 8,6 8,6 8,2 13,6 14,8 12,2 18,1 18,1
C50/60 appr. N [kN] 5,4 6,8 6,8 6,6 9,1 9,1 9,2 15,2 16,6 13,6 19,5 19,5
uncracked concrete
Approved loads, tension1 C20/25 appr. N [kN] 4,9 6,7 6,7 5,9 10,9 11,4 8,3 13,7 14,3 12,3 18,4 23,8
C25/30 appr. N [kN] 5,4 7,4 7,4 6,6 12,2 12,6 9,3 15,3 16,0 13,7 20,5 24,9
C30/37 appr. N [kN] 5,9 8,1 8,1 7,3 13,3 13,7 10,1 16,8 17,5 15,0 22,5 25,9
C40/50 appr. N [kN] 6,9 9,4 9,4 8,4 14,5 14,5 11,7 19,4 20,2 17,4 26,0 27,4
C50/60 appr. N [kN] 7,7 9,4 9,4 9,4 14,5 14,5 13,1 21,4 21,4 19,4 28,7 28,7
cracked concrete
Approved loads, shear C20/25 appr. V [kN] 9,0 9,0 9,0 12,9 15,3 15,3 17,4 21,9 21,9 30,9 34,3 34,3
> C25/30 appr. V [kN] 9,0 9,0 9,0 14,4 15,3 15,3 19,4 21,9 21,9 34,3 34,3 34,3
uncracked concrete
Approved loads, shear C20/25 appr. V [kN] 9,0 9,0 9,0 15,3 15,3 15,3 21,9 21,9 21,9 34,3 34,3 34,3
> C25/30 appr. V [kN] 9,0 9,0 9,0 15,3 15,3 15,3 21,9 21,9 21,9 34,3 34,3 34,3

Approved bending moments appr. M [Nm] 17,1 17,1 17,1 34,3 34,3 34,3 60,0 60,0 60,0 137,1 137,1 137,1
Spacing and edge distance2)
Effective anchorage depth hef [mm] 35 45 90 40 60 100 50 70 125 65 85 160
Minimum thickness of concrete slab hmin [mm] 80 80 135 80 90 150 100 105 187,5 120 127,5 240
Minimum spacing smin [mm] 35 35 35 40 40 40 50 50 50 65 65 65
Minimum edge distance cmin [mm] 40 40 40 45 45 45 55 55 55 65 65 65
Installation parameters
Drill hole diameter do [mm] 8 8 8 10 10 10 12 12 12 16 16 16
Diameter of clearance hole in the fixture df ≤ [mm] 9 9 9 12 12 12 14 14 14 18 18 18
Drill hole depth h1 [mm] 45 55 100 51 71 111 63 83 138 82 102 177
Installation torque Tinst [Nm] 15 15 15 40 40 40 60 60 60 110 110 110
Width across nut SW [mm] 13 13 13 17 17 17 19 19 19 24 24 24
Height of hexagon nut [mm] 6,5 6,5 6,5 8 8 8 10 10 10 13 13 13
High of the Cap nut [mm] - - - 22 22 22 26,5 26,5 26,5 - - -
Outer diameter x washer thickness BZ3 [mm] 16x1,6 16x1,6 16x1,6 20x2 20x2 20x2 24x2,5 24x2,5 24x2,5 30x3 30x3 30x3
Outer diameter x washer thickness BZ3-U [mm] 24x2 24x2 24x2 30x2,5 30x2,5 30x2,5 37x3 37x3 37x3 50x3 50x3 50x3
1)
Fastenings with anchorage depths hef < 40mm are constriced to use of statically indeterminate components under indoor conditions
2)
For anchor groups and near-edge anchorages, the minimum values of thickness, spacing and edge distance cannot be applied simultaneously but have to be determined according to
ETA-19/0619, Table B2.

h
h1
hnom
hef tfix

M Tinst

M Tinst

hef,min tfix
hnom,min
h1,min
hmin

Installation
BZ3

BZ3

Nm

90°

2023/24 PR MKT 11 ... a solid connection