lOMoARcPSD|16619061

MAINTAINING COMPUTER AND NETWORK SYSTEMS

Bsetle (Eulogio "Amang" Rodriguez Institute of Science and Technology)

Scan to open on Studocu

Studocu is not sponsored or endorsed by any college or university

Downloaded by CANDIDO SORO ([email protected])
 lOMoARcPSD|16619061

MODULE 4:
MAINTAINING COMPUTER AND NETWORK SYSTEMS

Content Standard Performance Standard

The learner demonstrates The learner independently

understanding of the underlying demonstrates skills in configuring
concepts and principles on
computer systems and networks as
configuring computer systems and
networks. prescribed by TESDA Training
Regulations.

Number of Sessions (Time Allotment):60 HOURS

Computer Hardware Servicing: This course provides an excellent

introduction to the Information and Communications Technology (ICT)
industry and in-depth exposure to personal computers, hardware, and
operating systems in accordance to local industry requirements and
standards. You will learn the functionality of various hardware and software
components and best practices in maintenance and safety issues.
In this module, topics will be introduced progressively, for easy
understanding. After carefully answering the pre- assessment, reading all the
lessons, answering all the guide questions, performing all the activities,
showing pieces of evidences of learning and answering the summative test,
you will have a considerable knowledge and skills in installing computer
systems and networks essential to be successful in computer hardware
servicing as one of the career options in ICT.

187

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

There will be three (3) major topics that you will encounter: (1) will be
maintaining computer systems; (2) maintaining network systems; (3)
inspecting and testing configured/repaired computer systems and networks.
The three major topics contains sub-topics which the ultimate goal to teach
you how to maintain computer and network systems. This module contains
what to KNOW, what to PROCESS, what to REFLECT and UNDERSTAND
as well as what to TRANSFER. The competencies for this module are:

LO 1. Plan and prepare for the maintenance of computer system and

networks
 Plan on how to maintain computer systems and networks
 Identify tools in maintaining computer systems and networks
 Inspect testing equipment and devices
 Check PC specifications
 Verify network functions and specifications

LO 2. Maintain computer systems

 Identify faulty computer systems

 Test normal functions of computer systems
 Perform repair and replacement of faulty computer systems
 Adhere to the recommended schedule and techniques in maintaining
and cleaning computer systems
 Respond to sudden breakdowns of computer systems in accordance
with established procedures

LO 3. Maintain network systems

 Follow OHS procedures in maintaining network systems
 Identify procedures in maintaining network systems
 Check or run the diagnostic software
 Adhere to the recommended schedule and techniques in maintaining
and cleaning network systems
 Respond to sudden breakdowns of network systems in accordance to
established procedures
 Run the burn-in test on computer systems

188

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

LO 4. Inspect and test configured/repaired computer systems and

networks
 Maintain the computer systems and networks to ensure safe
operations
 Run or conduct computer-to-computer communications
 Connect computer systems to the internet
 Check computer system and network to ensure safe operations
 Run the burn-in test on computer systems
 Conduct final inspection on the tests undertaken
 Prepare technical reports that comply with the job requirements

In order to master the above listed competencies, you must be

knowledgeable of the topics under what to KNOW, perform activities required
under what to PROCESS, accomplish additional meaningful tasks under what
to REFLECT and UNDERSTAND and finally show some pieces of evidence
of your learning by transferring what you have learned in a different context
under what to TRANSFER.

189

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

You will be challenged to dig deeper into your prior knowledge and
previous experiences about computer hardware servicing.
SKILLS TEST
Directions: Listed below are some of the most important skills that you must
master in order to render quality service when you enter the industry of
Computer Hardware Servicing. Read the skills carefully. Write “YES” if you
can do the skill and “NO” if not. Feel free to answer each skill. Write your
answers in your notebook.
I can… YES NO
plan and prepare work to ensure occupational
health and safety (OHS) policies and procedures
are followed.
obtain materials, tools, equipment and testing
devices needed to conform with job
requirements.
interpret work instructions according to job
requirements.

obtain computer components/ devices/ systems

and determine its location prior to installation.
install equipment / devices / systems in
accordance to job requirements.
check / test devices / systems and / or
installations to determine the conformity to job
requirements.
check computer systems and networks for
configuration in accordance with specifications
and requirements.
diagnose fault or problem in the computer
systems and networks in line with standard
operating procedures (SOP).
configure the identified systems and networks
based on specifications and job requirements.
inspect and test configured computer systems
and networks in conformity with manufacturer's
instructions / manual.
correct / adjust components or parts of computer
systems and networks in accordance with job
requirements.

190

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

test computer systems and networks to ensure

safe operation.
perform scheduled / periodic maintenance in
accordance with manufacturer's requirements.
make needed repairs / replacements in
accordance with established procedures, when
necessary.
clean and clear worksite of all surplus/excess
materials in accordance with company SOP.

Lesson 1. Procedures in Planning and Conducting Maintenance

Preventive Maintenance
Preventive maintenance can be described as maintenance of
equipment or systems before fault occurs. It can be divided into two
subgroups: Planned Maintenance and Conditioned-Based Maintenance.
Planned Maintenance (PM) is any variety of scheduled maintenance to
an object or item of equipment. Specifically, PM is a scheduled service visit
carried out by a competent and suitable agent, to ensure that an item of
equipment is operating correctly to avoid any unscheduled breakdown and
downtime of an equipment.
Condition Based Maintenance (CBM) is a maintenance strategy that
uses the actual condition of the asset to decide what maintenance needs to
be done. CBM dictates that maintenance should only be performed when
certain indicators show decreasing performance or upcoming failure.
Checking a machine for these indicators may include non-invasive
measurements, visual inspection, performance data and scheduled tests.
Condition data can be gathered at certain intervals, or continuously.
The purpose of systematic inspection, detection and correction of
existing / future problems is very important to maintain equipment / facilities in
satisfactory condition before it may cause major problem.
Maintenance, including tests, measurements, adjustments, and parts
replacement, performed specifically to prevent faults from occurring.
Maintenance is divided into two (2) general type. Preventive
maintenance is given for maintaining equipment and facilities in satisfactory
operating condition to extend the life of the equipment. Corrective
maintenance is task performed to identify, isolate and rectify a fault so that
the failed equipment or system can be restored to an operational conditions
within the tolerances or limits.

191

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Common methods of determining what preventive (or other) failure

management policies should be applied are: Original Equipment
Manufacturer (OEM) recommendations, requirements of codes and legislation
within a jurisdiction, what an "expert" thinks ought to be done, or the
maintenance that is already done to similar equipment, and most important
measured values and performance indications.

Maintenance Procedures
In preparing maintenance procedure, you also have to consider
designing a systematic plan for both for hardware and software. This saves
time, money and frustration and ensures safe conditions to prevent injury to
people and damage to computer equipment.

Figure 123. Computer Inspection

Planning Maintenance Procedures for Computer System and Networking:

A. Design a systematic maintenance plan for hardware.
1. Design a monitoring, evaluating and updating plan.
2. Place your computer in a well-ventilated area.
3. Schedule the use of computer for its longer life.
4. Move the computer only when it is turned off and unplugged.
5. Treat your computer properly.

B. Design a systematic maintenance plan for your software.

1. Backup your files.
2. Install or secure passwords.
3. Delete temporary files.
4. Update anti-virus and spyware.

192

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Design a systematic monitoring, evaluating and updating plan for

hardware.

Computers have significantly changed the working environment,

simplifying and speeding up many tasks across many work areas. However,
with these advances are some potential problems and maintenance issues.
These guidelines describe how computer technicians, students and computer
users can work together to achieve a productive workplace environment. The
guidelines reflect current knowledge and best practice for the use of computers
so you can achieve maximum efficiency and safety in your workplace.

SAMPLE MONITORING PLAN

Date:
Comp Comp Comp Comp Comp Recommendations
1 2 3 4 5
Monitor is
functional.

Printer
Cartridges are
replaced.
Storage devices
are functional.
Optical Drives
are functional.

Place your computer in a well-ventilated

area.
 This will allow proper circulation of air
inside the computer unit.

Figure 124. Computer Laboratory

Schedule the use of computer for its longer

life.

 This will help lessen the attacks of viruses

and increases the life span of your computer.

Figure 125.Computer Usage

193

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Move the computer only when it is turned

off and unplugged.
 To avoid damage to the computer unit
always turn off and unplugg it when
transferring the computer to another
location.

Figure 126. Unplugged Power Cable

Treat your computer properly.

 This means taking care of your computer. PCs
and laptops should be properly turned off.

Figure 127. Computer care

Do systematic maintenance plan for your

computer software.

Back-up your files

 Protecting your files means creating backups,
storing your file backups on your hard drive or
any removable storage device regularly.

Figure 128.Backup Media

194

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Install or secure passwords.

 Installing passwords makes your files
more secure.

Figure 129. Installing Passwords

Delete temporary files.

 Deleting the temporary files on your
computer will enhance its speed and
will create more disk space for your
files.

Figure 130. Deleting Temporary Files

Update anti-virus and spy ware.

 Regularly update your anti-virus for
your computer protection against
viruses.

Figure 131.Updating Anti-Virus

195

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Diagnoses and Identification of Faulty Computer and Network Systems

The following topics will familiarize you with planning and preparing for
installation; installing equipment and devices; and conducting test on the
installed computer system. Read carefully all the topics and apply the skills you
have gained from the lessons provided in this module.

A. Preventing Computer Systems Failure

Computers, in general, are pretty stable, and you can usually rely on
them to not fail you. However. If you develop some basic habits, you can
postpone serious computer problems, if not avoiding them entirely.

1. Computer issues. Know

that your computer is going
to fail. You need to treat
your computer as if it were a
doomed failure. Always
assume that failure is
imminent.
A fatal error results in
data loss, damage to your
computer and/or its ability to Figure 132. Computer issues
function, hardware failure, or other serious issues.
Signs of imminent failure might include regular poor performance, frequent
errors and/or popups, unknown programs being installed, frequent power loss
(the computer shuts down automatically frequently), frequent crashes, or
certain parts not working.

196

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

2. Dust issues. Preventing failure means

making sure your computer is physically
clean in its operations. Make sure that
there is not too much dust inside,
especially on the fans. Dust can reduce
performance and cause overheating.

Figure 133. Inside the System Unit

3. RAM issues. Know your computer's

specifications and its limits. RAM runs
even the PC is running idly. It consumes
RAM storages capacity making you
difficult to open a program if RAM storage
had been consumed.

Figure 134. Random Access Memory

4. Malware issues. Make sure that your anti-virus software is updated to be

able to scan unnecessary files that enter your PC. Do not install programs
that you’re not familiar with or if do not fully trust.

5. Hardware issues. When something is not

working properly, either diagnose the problem
yourself and fix it, to prevent further damage or
contact a professional and have them look at it
for you. Take advantage of warranties on parts
if they fail.

Figure 135.Hardware

197

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

6. Warning issues. If the same error

message shows up every time you
log in, be sure to investigate it.
Although unlikely, these errors could
be important.

Figure 136.Error Messages

7. Usage issues. Give your computer a break.

Believe it or not, your computer likes rest, too.
Leaving it on all of the time wears out hardware,
and puts unnecessary wear and tear on the
hardware. Giving your computer a break also
saves you money (electrical bills).
Figure 137. Power Off

8. Warranty issues. Always take advantage

of warranties. Get a warranty to protect your
hardware, so it can be replaced in case of
failure.

Figure 138. Warranty Sticker

9. Backup issues. Back-up everything.

Run regular backup of your important files to
other disks, computers, or an online backup
service.

Figure 139. Storage Media

198

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

10. Error message issues. If your PC

fails to function, diagnose the problem.
Write down the necessary info such as
error messages or things don’t work
properly. If you know how to fix it, do it, to
avoid further damage but if not then seek
for professional help.

Figure 140. Error Messages

Network Problems
When you suddenly cannot connect to the Internet, any of several
things could be wrong. Use this checklist to find and solve common Internet
connection problems.
1. Unplugged Network Cable
Unplugged or loose network cables are one of the most common
reasons why you might suddenly find yourself unable to connect to the
Internet. That's a problem on wireless networks, but on most laptops the
wireless-fidelity (Wi-Fi) radio can be inadvertently shut off instead. On home
networks, it's also possible that someone unplugged the router.
Action: Ensure your wired or wireless network hardware is switched on and
plugged in.
2. Website Temporarily Offline
What may seem to be a network problem connecting to the Internet is
sometimes simply a Web site (or whatever server is on the other end of the
connection) being temporarily offline.
Action: Before assuming your Internet connection is faulty, try visiting several
popular Web sites rather than just one.
3. IP Address Conflicts
If your computer and another on the network both have the same IP
address, the conflict between them will prevent either from working properly
online.

199

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Action: To resolve an IP conflict, follow these instructions to release and

renew your IP address. If your network uses static IP addresses, manually
change your IP to a different number.
Windows XP

Step 1:
Click Start > Run. In the Run window, enter “cmd” then click OK.

Step 2:
On the command prompt, enter “ipconfig/release” then press [Enter].

Step 3:
Once the IP address becomes 0.0.0.0, enter “ipconfig/renew” then
press [Enter].

4. Computer Firewall Malfunctions

Firewall software running on most computers is intended to prevent
unwanted network traffic from disrupting its operation. Unfortunately, these
software firewalls can malfunction and start blocking valid Internet traffic.
When two software firewalls, such as Windows Firewall plus a third-party

200

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

product, are installed on the same computer, contention between the two can
also incorrectly block traffic.
Action: If you have recently installed or upgraded software firewalls on your
computer, temporarily disable them to determine whether it may be the cause
of Internet connection problems.
5. Outside Wireless Signal Range
The performance of Wi-Fi network connections depends on distance
between the device and the wireless access point. The farther away a Wi-Fi
device is, the slower the local connection generally runs, until it breaks
altogether. Wireless signal interference in the area can also limit the effective
range of a Wi-Fi connection. Whenever you are unable to reach the access
point, you also cannot connect to the Internet, obviously.
Action: Use one of the options written below to measure the strength of your
wireless signal and try these ideas to expand the range of your Wi-Fi.
Ideally, you should place the router at a height in some central location and
away from other cordless devices. Make sure that the router is not placed
near something metallic (like an almirah or window grills) as that will weaken
the wireless signals. Avoid mirrors as they can reflect the wireless signals
away from the desired direction.
Wireless routers generally ship with omni-directional antennas but you can
replace them with more powerful uni-directional antennas and that will keep
the signal from getting broadcast in all directions.

6. Wireless Network Configuration

Wi-Fi networks with encryption options like WPA or WEP turned on
require computers to use matching security keys when connecting. If
someone changes the encryption keys or password on the access point,
devices that worked before will suddenly be unable to establish sessions and
Internet connections. Likewise (though less likely), if the access point settings
are changed to require using a specific Wi-Fi channel number, some
computers may be unable to discover it.
Action: Confirm that the Wi-Fi channel number and encryption keys on your
router have not recently changed (check with the network administrator if
necessary). When using a hotspot, follow the provider's instructors for signing
in carefully.

201

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

7. Broadband Router or Access Point Malfunctions

Home networks that use broadband routers are easier to manage than
those without one, but technical glitches with the router can also prevent
computers from connecting to the Internet. Router failures are caused by
overheating, excessive traffic, or simply a faulty unit. Typical symptoms of a
flaky router include computers on the network not being able to obtain IP
addresses, or the router console not responding to requests.
Action: Check the router's lights and console if possible to ensure it is
running and responding properly. Troubleshoot and reset the router if
necessary. Change the old router if necessary.
8. Blocked By Your Service Provider
Internet Service Providers (ISPs) can choose to block access from
your account if you fail to make payment or otherwise violate the provider's
Terms of Service. Especially when using paid hotspots that charge by the
hour or day, sometimes people forget to keep their subscription updated.
Other common reasons an ISP might block your account include exceeding
bandwidth caps, sending spam e-mail, and downloading illegal or
inappropriate content.
Action: Contact your ISP if you suspect your account has been blocked.
9. Computer Glitches
Computers suffer from technical glitches or malfunctions. Although
relatively uncommon nowadays, a computer's network adapter hardware
might suddenly fail due to overheating or age. Failures in the operating
system software that control the adapter, on the other hand, can occur
frequently especially with computers that are heavily used. Viruses and
worms also may disable or block a computer's network interfaces from
functioning properly. If using a laptop or other mobile device, transporting it
from one location to another can corrupt the state of its network.
Action: Check the computer and remove any malware that you will find. On
Windows computers, try resetting the network connection. Reboot the
computer if necessary.

10. Network Downtime

Those using satellite Internet service may notice they canot connect to
the Internet during periods of very bad weather. Providers in dense urban
areas (including cellular Internet carriers) sometimes are unable to support

202

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

peaks in network traffic that causes sporadic outages for some customers.
Finally, those who subscribe to newer or more complex forms of Internet
services (such as fixed wireless broadband) may experience more downtime
than others as providers encounter more issues with relatively less mature
equipment.
Action - If all else fails, contact your Internet provider to verify whether they
are experiencing an outage. Some providers also give advice on
troubleshooting problems connecting to their network.

Slide Show Computer and Network Errors

Directions: In this worksheet, you will write the computer errors/problems,
error messages and the network problems you encountered. Create a
Powerpoint presentation.
Be prepared to discuss your answers.
Computer Problems Network Problems

Pictorial Tour
Directions: Form a group of five members and make an additional research
on the different diagnoses on faulty computer and network systems. Visit
computer shops in your community. You can also interview/observe a
practitioner while lending a quality service in computer hardware servicing.

203

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Video Demo
Application of Diagnosis on Faulty Computer and Network Systems

Directions: After the interview and observation with a practitioner, your group
will showcase what you have learned through video demo. You can use a
video camera to record the event stressing the diagnosis on faulty computers
and networks system. This event will be presented through a video
presentation using projectors or monitors. You will be rated based on the
rubrics written below:
CRITERIA PERCENTAGE SCORE
Accuracy (Role and function of a device 30%
was accurately shown)
Presentation (Organization or sequence 30%
of the play and appropriate gestures were
used)
Clarity (Diagnosis clearly delivered) 30%
Team work (Cooperation of each member 10%
was evident)
Performance Rating

Maintain Computer and Network System

As a future computer technician, you must be diligent and eager to
know the different procedures in using the tools for configuring computer and
network systems because this will guide you to carry out a particular job in a
proper manner. Once you already identify the competencies, you must also
acquire the appropriate skills to apply it in real time situations.
This part will help you to find out some of the required procedures in
computer system configuration. Some of them are intentionally not included
so that you will have a chance to explore and learn through your own
experience and study.
The subsequent statements below describe the varied procedures in
using Action Center in the Control Panel:

204

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Windows and other Microsoft products have their own built-in

troubleshooting tools that bear little or no resemblance to the Fix It
troubleshooters. Windows 7's Action Center Control Panel applet alerts you to
system problems via an icon in the taskbar's notification area. You can also
use the Action Center to view the machine's security and maintenance
status.

Go to the Action Center's link

to the Control Panel's
Troubleshooting applet to find about
a dozen options for fixing problems
related to program compatibility,
hardware and audio, networking,
security, Windows Update,
performance, and power usage.
(Information for troubleshooting
Vista and Windows XP is available
on Microsoft's TechNet site.) Here is
Figure 141. Control Panel
how:
1) Click on the Start Button.
2) Choose Control Panel.
3) Select System and Security.
4) Choose Action Center.
5) On the Action Center, browse
and check all the options for systems
check.
 Security (View Anti-Spyware
Programs, update virus Figure 142. System and Security
protection)
 Maintenance (Perform System Maintenance, Check for Solutions for
unreported problems, Setup Backup)
 Troubleshooting
 Recovery

205

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Figure 143.Action Center Dialogue Box

Windows Security Center can help enhance your computer's security by

checking the status of several security essentials on your computer, including
firewall settings, Windows automatic updating, anti-malware software
settings, Internet security settings, and User Account Control settings. If
Windows detects a problem with any of these security essentials (for
example, if your antivirus program is out of date), Security Center displays a
notification and places a Security Center icon Picture of the red Security
Center shield in the notification area. Click the notification or double-click the
Security Center icon to open Security Center and get information about how
to fix the problem.

When it comes to problems with Office applications, you are not likely to
find much help in the programs' built-in help systems. (Note that Office 2007
apps include a built-in diagnostic routine. See the Microsoft Support site for
more information.)

You could attempt to sort through the links on Microsoft's support site for
Office 2007 and 2010 or the equivalent site for Office 2003, but if the Office
Fix It solutions do not help, your best bet may be to use the repair feature of
the Office installer.

206

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

To do so, open the Control Panel Programs and Features applet (Add
or Remove Programs in Windows XP), select your version of Office, click the
Change button at the top of the list, then select Repair button in the wizard
that opens, and follow the wizard's instructions. The Microsoft Support site
provides more information about repairing Office 2010, Office 2007,
and Office 2003.

Even if your system appears to be running well, you may benefit from
using Microsoft's Fix It and other diagnostic tools. Most PC users rely on
automatic updates of their system, security, and application software. But
programs sometimes conflict in ways their vendors cannot predict. Few of
these software glitches slam the brakes on your system but they are likely to
slow it down a little or a lot.

Investigate and Interpret: Computer Systems Check

Directions: In this worksheet, you will check and write down the current
status of your computer systems before the updates and after the updates
with regard to the different area listed below. Be prepared to discuss your
answers and the updates made.
Area Status Status
(Before (After Updates)
Updates)
Security
1) Anti-Spyware Programs
2) Anti-Virus
Maintenance
1) System Maintenance

207

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Investigative Report
Directions: To deepen your understanding about computer systems status,
search online or you can also interview a practitioner while rendering a quality
service in computer hardware servicing. Present your report to the class.
Ask their Profile (Name, Job description, Age, Business Name).
1. Interview them about procedures in maintaining their computer and
network systems or usual problems they encountered.
CRITERIA PERCENTAGE SCORE
Accuracy (Details in maintaining 30%
computer and network systems were
elaborated well).
Clarity (Clearly delivered each topic) 30%
Presentation (Organization or sequence 10%
of information)
Performance Rating

Magazine Article
Directions: Make an article regarding to the effects of ignoring computer
problems. Use the questions below as your guide in writing your article. Use
striking title and be creative. Be ready for an oral presentation.
1. What is the risk of turning off messages about spyware and related
protection?
2. What is the risk of turning off messages about virus protection?

Contents Excellent (5) Good (3) Poor(1)

Spelling Almost all words spelled

correctly
Capitalization Begins all sentences but
one with uppercase
letters.
Punctuation Correct ending
punctuation in every

208

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

sentence but one.

Grammar Simple sentences are
grammatically correct.
Handwriting Legible. Good spacing
and alignment.
Total Points

COMPUTER SPECIFICATIONS

What is Specification?

The specification or ‘spec’ is a list of the key components that make up

the computer. It is provided by retailers to help buyers decide which PC, and
which combination of features, they need. When buying a PC you start by
deciding what you want your PC to do. This tells the specification you actually
need.

When reviewing a computer specification, the most important

component to take are the processor, the size of RAM and the size of the
hard drive as these are central to the overall capability of the system. If it is
planned to use specialized programs for students with special needs, it is
advisable to purchase a suitable specification computer to meet the system
requirements for these programs.

209

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Understanding a Specification

Sample specification for a certain desktop computers:

Processors
Two companies - Intel Inc. and AMD Inc. – are the manufacturers of
most of today’s PC processors and both offer a range that balances price and
performance. Processors are generally defined by their speed, in megahertz
(MHz) or in gigahertz (GHz), and this relates to the number of operations they
can perform per second. The higher the value, the faster the PC will perform
and the more expensive it is. More recent and more powerful processors use
a 64 Bit architecture, rather than the previous 32 Bit models.

Memory (RAM)

210

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

The main working memory in a computer is called random access

memory or RAM. The processor uses this memory to run programs. RAM is
measured in megabytes (MB). Most modern computers use DDR 2 RAM.
A minimum of 2024 MB (2GB) of RAM is recommended for general
purpose PCs. 2048 MB (2GB) of RAM is also sufficient for PCs running
multimedia applications, i.e., those on which digital music, digital video or
high-end graphics are being created/edited.

Storage – The Hard Drive

The hard drive is the computer’s primary storage area. It stores the
applications and programs that run on the PC, as well as any work created by
users. From a school’s perspective, the capacity of the hard drive, measured
in gigabytes (GB), is a key criterion and should be given due consideration
when reviewing PC specifications.
A hard drive capacity of at least 80GB is recommended for general
purpose PCs. A hard drive capacity of 200GB or more is recommended if
working with multimedia applications where large graphics and digital
audio/video files are being created and stored.

Other Specifications
Monitors
The older Cathode Ray Tube (CRT) have been largely replaced by
Liquid Crystal Display (LCD) and Light Emitting Diode (LED) flat-screens. A
15” LCD/LED has the same viewing area as the older 17” CRT.
Average entry-level PCs usually come with a 17” flat-screen and this is
adequate for most general purpose applications.
Larger 19” flat-screens are available and may be appropriate if video
editing and advanced graphics work is being carried out.
Teachers of students with special needs may want to consider using
larger monitors with their students.

Optical Drives
CD R/W drives are standard on PCs and allow the information on a
compact disc (either data or audio) to be read and written to by the PC. It is
defined by its speed (i.e., 48x or 48 speed).
DVD drives can read both CDs and DVDs. Standard on entry level
computers are 48x DVD-ROM/CD_RW drives and allows you to copy blank
CDs. High performance computer use 52x DVD-RWs. Educational software is
being developed in both DVD and CD formats, but a DVD can hold over 25
times more data than a CD.

211

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Graphics and Sound Cards

These cards are installed inside a PC and are responsible for
determining the quality of the audio and visuals (graphics and video) output
by the computer. They hold their own memory (in MB), which is why they add
to a computer’s capability.
An integrated graphics card with 256MB of memory is recommended
for general purpose PCs.
Computers running high-end applications generally require a separate
256MB graphics card.
A sound card generally comes as standard in most PCs purchased
today. If students intend to work extensively with digital music, the school
should consider getting a high-end sound card as this will create greater
depth, complexity and realism of sound.

Speakers and Headphones

Most computers come with either built-in or external speakers. Schools
may also consider buying headphones to control sound levels within a
classroom or computer room. Cheap ‘headphone splitters’ can also be
purchased — these enable two sets of headphones to be used per computer.

Network Interface Card (NIC)

It is recommended that all PCs be purchased with a suitable network
interface card (NIC). A network card allows a computer to be connected to a
network. A 10/100/1000 Mbps (Megabits per second) card is the standard
network card today. Few school networks currently operate at speeds higher
than 100Mbps.

Operating Systems (OS)

PCs are generally purchased with an operating system pre-installed. It
is worth checking that your existing software will still work with the operating
system of any new systems being purchased. It may be possible to choose a
particular operating system and, if so, this may help standardize new
machines with existing school PCs.
At present, Microsoft’s newer OS is Vista, which generally performs the
same functions as Win XP. Microsoft XP Professional is still the most
common and recommended OS found in schools that meets their general
needs very well and is recommended for schools. As Vista operating system
can come in various types and configurations, schools should check that the
version of Vista will be suitable and compatible for the software and network
infrastructure of the school. Vista Home or XP home versions are not
recommended for use in schools, however when ordering computers schools
need to specify a base operating system. The choice of base operating
system should be made along with their choice of operating system license.
Operating system license costs depend on a number of factors including type
of school, or type of license, example once off purchase via Microsoft’s select

212

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

agreement or purchasing software per year via Microsoft’s schools

agreement.
Linux is an open source free operating system which is not widely used
by schools at present, though it may be suitable for schools who are aware of
its capabilities. The most widely used open source data base is Ubuntu. It is a
Linux based operating system and is distributed free along with the source
code. Its desktop looks somewhat similar to that of Windows, with window
controls and icons. There is reasonable large software support available on
Ubuntu; the common applications include Mozilla Firefox web browser,
LibreOffice office application suite, GIMP image editor.
OpenSolaris is a computer operating system developed by Sun
Microsystems. It runs well on desktops, laptops, servers and data centers.
OpenSolaris is GUI based like Ubuntu and has rich graphical desktop and
windows for easy navigation. It is now available in version 11 and can be
downloaded without any cost from the Oracle website.

Purchasing Considerations
Consider the following points when purchasing PCs
• What is the intended use of the PC and will the chosen specification fulfill
these aims?
• Is the PC compatible with existing computer equipment and software?
• Is the technical support service satisfactory?
• a minimum 1 year warranty including replacement if needed and full
parts and labor is recommended
• Will added peripherals be required such as headphones, and optical
mice.
• Easy access of multiple USB ports
• Operating System licensing options

213

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Internet Research
In this worksheet, you will use the Internet, a newspaper, or a local store to gather information
about the components you will need to complete your customer’s computer. Be prepared to
discuss your selections.
Instructor Note: All the components a student chooses must be compatible with the components provided. (For
example, the selected CPU and RAM must work in the provided motherboard) No budget has been given. Answers
may vary.

Your customer already owns the case described in the table that follows.
Brand and Model
Number Features Cost
Cooler Master ATX Mid Tower
CAC-T05-UW ATX, Micro ATX compatible form factor
2 External 5.25" drive bays
2 External 3.5" drive bays
2 Internal 5.25" drive bays
7 Expansion slots
USB, FireWire, audio ports
Search the Internet, a newspaper, or a local store to research a power supply compatible with the components that
your customer owns. Enter the specifications in the table that follows:
Brand and Model
Number Features Cost
Sea Sonic 550 watt
SS-550HT Dual +12V
SLI Certified
Up to 88% efficiency
ATX12V/EPS12V form factor
Brand and Model
Number Features Cost
GIGABYTE LGA 775
GIA-965P-DS3 DDR2 800
PCI Express X16
SATA 3.0 Gbps interface
1.8V-2.4V RAM Voltage
1066/800/533 MHz Front side bus
4 memory slots
Dual-channel memory supported
ATA 100 connector
RAID 0/1
4 USB 2.0 ports
ATX form factor

214

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Answer the following:

1. List three components that must have the same or compatible form factor.
2. List three components that must conform to the same socket type.
3. List two components that must use the same front side bus speed.
4. List three considerations when choosing memory.
5. What component must be compatible with every other component of the
computer?

Making a Checklist
Directions: Make a market study on components, its brand, functionality and
cost. You can ask computer vendors of the price lists and inquire of its
specifications. Choose two brands then make comparisons. Be ready for an
oral presentation.

Components Brand Cost Cost Strengths Weakness

No.1
Processor
Motherboard
Memory
Graphic Card
Sound Card

Components Brand Cost Cost Strengths Weakness

No.2
Processor
Motherboard
Memory
Graphic Card
Sound Card

215

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Performance Score Card

Score Reference:
0= Details Points Some facts are clearly
Brand model is precisely given
inconsistent with source
Cost is based on the market
material
selling price
1= Some facts are
Strength/weakness are accurate
questionable/unrealistic
Presentation skills (Clarity of the
2= All facts seem
voice)
accurate/good.
TOTAL

Computer Specifications
Directions: In this activity, you will create a complete list of specifications of a
one set desktop computers including its brand name and cost. Total all the
amount and present it to the class.

Performance Score Card

Score Reference:
Details Points 0 = Some facts are
Brand Model is precisely given
clearly inconsistent with
Cost is based on the market selling price
source material
Complete list of the given hardware were 1= Some facts are
enumerated well
questionable/unrealistic
Presentation (Clarity of the thought and
2 = All facts seem
voice)
accurate/good.
TOTAL

216

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Networking Hardware Requirements

Although setting up a home network is not necessarily an expensive or

difficult project, you just need to have few basic pieces of hardware to
connect your computers, printers, gaming consoles, and assorted gadgets to
each other — and to the Internet.

Need Purpose
DSL or Cable A DSL or cable modem connects your computer to a
Modem high-speed DSL or cable Internet connection. Although
dial-up modems are still available for slower dial-up
Internet connections, the connection speeds are far too
slow for a home network.
Wired or A wired or wireless router connects your DSL or cable
wireless modem to your home network. Many DSL/cable modems
router now have built-in routers that allow you to connect your
network directly to your Internet connection.
Wired or A wired or wireless network adapter is the device in your
wireless computer (or printers, gaming consoles, and other
network networking equipment) that connects your computer to
adapters your network.
Ethernet Ethernet cabling is used to connect your wired network
cabling adapters to a router or network switch. Even if you are
using a wireless router, you will need at least one
Ethernet cable to connect your wireless router to your
DSL or cable modem.

In a network, computers and other devices are connected to share

resources. Network connections vary in many ways depending on the setup
the user would want to, availability of the network devices and the location or
map area of links. One may either use wireless throughput or wired
throughput. The next lesson will guide you on how to setup these
connections.

217

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Router Basics

Your router is the glue that holds your home network together. It
connects all your computers to one another, either through Ethernet cables or
a wireless connection. A router is different than a modem: your modem
connects you to the internet, while your router connects your computers to
one another. When you hook up your router to the modem, however, you are
then able to share that internet connection with all of the computers on your
network. Sometimes modems come with built-in routers.

Devices that connect to your router—that is, the computers, tablets,

smartphones, DVRs, game systems, and so on—are called clients. Each
client on the network is given an IP address, which helps your router direct
traffic. Clients within the network get a local IP address, while your modem
gets a global IP address. Global IP addresses are like street addresses, while
local IP addresses are like apartment numbers: one lets you find the building
in relation to the rest of the world, while the other lets you find the specific
location within the complex. These addresses make sure the right information
from the outside world gets to the right computer on your network.

Routers have a number of different features, so we'll go through some

of the most common router specs and how they affect your home network.

Most people have a mix of wired and wireless devices on their

network, so most of the discussion will focused on wireless routers. Since
wireless routers allow for both wired and wireless connections, you can wire
up when necessary, and connect over Wi-Fi everywhere else.

Wireless Throughput

Throughput is the
speed at which a router can
transfer data. The transfer
speed of your wireless
connection is dependent on
the wireless standard it uses.
The most common standards
today are 802.11g and
802.11n (also known as Figure 144. Wireless Throughput
"wireless G" and "wireless N",

218

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

respectively). Wireless N is faster than wireless G, though routers that

support wireless N are also more expensive. Most new devices—like
smartphones and laptops—support the faster wireless N.

Wired Throughput

The wired half of your router will come in one of two speeds: 10/100
Mbps and 10/100/1000 Mbps (also known as "gigabit"). 10/100 routers are
cheaper, but will not transfer data between computers as quickly as gigabit
routers will. If you are only using your router to connect to the internet, 10/100
is fine, since your internet connection is probably slower than 100Mbps,
meaning you will not be able to actually take advantage of the router's full
speed. If you are transferring data between computers, however, you may
want to go with a gigabit router, since it will transfer that data much faster
than a 10/100 model.

Range

Wireless routers can only reach a limited area of distance. If you have
a big house and have the router on one side, you might not be able to access
the network from the other side of the house. Your range, like your speed, is
determined by the wireless standard you use. Wireless N has a longer range
than wireless G, so if range is important you will want to use wireless N.

That said, there are many other ways to connect to your network from afar.
Wireless extenders (also called wireless repeaters) are products you can buy
that do exactly what the manuals say to extend your network further.
Alternatively, you can buy a powerline adapter, which lets you use your
home's electrical wiring to hook a distant device up to your router with an
Ethernet cable (and thus get a faster connection than wireless would allow
for).

Number of Ports

Routers have two types

of ports in the back: LAN ports
and WAN ports. Your WAN
port hooks up to your modem
(which, again, is what
connects to the internet), while
the LAN ports hook up to your
computers and other clients. Figure 144.Router ports
Most routers have one WAN
port, but you will need as many LAN ports as the wired devices you have. If

219

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

you have more wired devices than can fit on a router, you can plug them all in
using a wired switch. A switch is like a power strip for your router: it lets you
plug in more devices than the router originally allowed.

Wireless Security
Unless you do not mind
strangers eating your bandwidth and
potentially accessing your
networked files, you should always
protect your wireless network with a
password. WPA2 is currently the
most secure type of wireless
encryption, so make sure you use
Figure 145. Wireless Security WPA2 if you can. Some old wireless
devices do not support WPA, in
which case you will have to use the less secure WEP instead. Basically,
every devices made in the last four years supports WPA2 encryption.

Sample Network Components Specifications

Item Minimum Recommended

Requirements
Modems
Cable Cat-5 UTP Cat-5 UTP
network adapters Ethernet 100Base-TX Ethernet 1000Base-T
Hub/Switch 100 Megabit Hub 1.0 Gigabit Switch
Power Surge Protector Surge Protector & UPS

Network Layout
Directions: In a short coupon bond, draw a simple schematic diagram of a
computer connected to a network. Label the parts and present your drawing
to the class. Your work will be rated according to the following criteria:

220

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

CRITERIA Excellent Good Fair Poor

4 3 2 1

Adherence to the
proper network setup
(50%)
-drew the diagram
with right setup
Workmanship (20%)
-organized materials
and tools while
accomplishing the
task and exhibited
effective time
management
Quality of work (30%)
-presented the final
output neatly.

Critical Review
Directions: Make a market study on network hardware equipment, its brand,
functionality and costs. You can ask computer vendors of the price lists and
inquire of its specifications. Choose two brands then make comparisons. Be
ready for an oral presentation.

Components Brand Cost Brand Functionality Cost

No.1 No.2
Router
Hub 8-port
UTP cable
Rj45
connector
Sound Card

221

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Performance Score Card

Details Points Score Reference:

Brand Model is precisely given 0 = Some facts are clearly
inconsistent with source
Cost is based on the market selling
price
material
1= Some facts are
Complete list of the given hardware questionable/unrealistic
were enumerated well 2 = All facts seem
Presentation (Clarity of the thought accurate/good
and voice)
TOTAL

Computer Shop Network Layout

Directions: Draw on a short bond paper, layout plan of a computer café
connected to a network. Write the specifications of the network hardware and
incorporate the following requirements. Draw your diagram in a short coupon
bond.
 one computer server
 20 client computers
 one DSL modem
 UTP cables
 hub

Performance Rubrics

CRITERIA Percentage Score

1. Originality of network layout 40%

2. Neatness of the drawing 40%

3. Proper use of equipment and materials is 10%

observed.
4. Observance of Safety Precautions. 10%

PERFORMANCE RATING

222

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Lesson 2: Maintaining Computer Systems

This lesson is intended to develop your skills in planning and preparing

for installation of computer devices and operating system. At the end of this
lesson, you are expected to:

 Follow OHS procedures in maintaining computer systems

 Diagnose and identify faulty computer systems
 Test normal functions of computer systems
 Perform repair and replacement of faulty computer systems
 Adhere to the recommended schedule and techniques in maintaining and
cleaning computer systems
 Respond to sudden breakdowns of computer systems in accordance with
established procedures

As a future computer technician you must be diligent and eager to

know the different procedures in maintaining computer system because this
will guide you in carrying out a particular job in a proper manner. Once you
already identify the procedures, you must also be able to apply it in real life
situations.

Safety Precautions
Occupational Health and Safety (OHS) Policy –An Information and
Communication Technology (ICT) student should know how to behave when
working in the computer laboratory, as well as implement a safe way of
accomplishing every task. Safety practices should be learned early and
always adheres in working with any electrical and electronic device, including
personal computers and its peripherals. This is for your protection as well as
to the people working with you, and for the devices that you are using. The
basis for this process begins with Occupational Health and Safety Policies.

223

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Occupational Health and Safety standards

Each student has a responsibility to their colleagues and their
organization to report and act upon any potential workplace hazard. Students
need to be aware of the type of hazards that are possibly present in their work
environment.

Procedure
1. Identify the hazard.
2. Clear the area close to the hazard.
3. Partition the hazard off or clearly identify the area to protect other
people from harm.
4. If the hazard is can be easily and safely cleared, then do so.
5. Report the hazard to the appropriate person (such as teacher in
charge, principal etc.) to obtain assistance.
6. After clearing of the hazard, fill out the correct documentation to
assist in identifying improved practice to reduce further incidence of
hazards.

MAINTENANCE OF COMPUTER SYSTEM

Perhaps you have handpicked the finest computer with the selected
fastest processor and graphic card and with a few gigabytes of memory. So
you thought to yourself that your machine is probably going to sustain you for
the next five (5) years. But little did you discover that some six months down
the road, your computer is behaving like a Pentium 2 computer, perpetually
flustering you with its choppy images, frustrating pop-ups and tremendously
slow disk access. Gradually, your computer crashes and all your data is lost
on one fine afternoon.

One thing you have probably missed out is the need for system
maintenance. The basic routine maintenance comprises of the 3 basic
processes:

1. Data Backup
2. Malware Maintenance
3. Disk or File System Maintenance

224

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Let us address each of the processes in detail so that you can better
understand how you can apply them in your system to extend its longevity.

DATA BACKUP

Backing up basically
means creating a redundant
copy of a data so that in case
anything happens to the
original data, you have a spare
copy. This is typically a simple
thing to do.

First, you must ask

yourself why should you back
up the data or system? Figure 146. Data Backup

If you feel that you should backup your valuable data, then you should
decide and select what are the data to be backup. Depending on your needs,
you may choose to backup your windows registry, or your Outlook Express
mail data, or even your windows security keys.

Windows operating system's friendly interface allows you to drag and

drop computer files from one storage device to another. And this can be as
simple as copying a document file from your desktop into a thumb drive.

But when these files gradually occupies a lot of disk space, you may
need to seek help from archiver utilities such as Winzip which enables you to
compact your files into a single compressed file. You can then break up this
large file into several pieces to be stored in several mediums such as a span
of CD or DVD-Recordable.

Winzip also allows you to protect your file with encryption and a
software password to prevent any unauthorized access. There are a number
of backup methods you could use.

225

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

How to backup files in Windows XP:

1. To use the built in

Windows XP backup
tool, follow the
instructions.

2.Click the Start

button > All
Programs >
Accessories >
System Tools >
Backup.

Figure 147. Step No.2 How to Backup your files

3. The Windows XP backup tool allows backing up all user files in just one
task. If you select the option of the My Documents backup, it will copy the
entire contents of the Documents and Settings folder including MS
Outlook/Outlook Express messages and settings as well as your profile
settings.

The Windows XP
backup tool allows backing
up all user files in just one
task. If you select the option
of the My Documents
backup, it will copy the entire
contents of the Documents
and Settings folder including
MS Outlook/Outlook Express
messages and settings as
well as your profile settings.

Figure 148. Step No.3

4. However, in most situations full backup is not necessary. In all likelihood

the My Documents folder of your computer will be large in size and contain a

226

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

lot of irrelevant information. If this is the case, Windows XP backup tool

suggests that you manually specify files that you want to include or exclude
from the backup set.

Figure 149. Step No.4

5. Lastly, do not forget to back-up your Internet Explorer favorites from within
IE. You can export them from the Menu.

Figure 150. Step No.5

227

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

MALWARE MAINTENANCE

Malware refers to any

kind of malicious codes, objects
or content that infiltrates your
computer, resulting in damage
and causing your system to act
in an undesirable manner.
Commonly, these include
viruses, spyware, worms, trojan
horses, spams and many more.
When you are infected, you can
lose your privacy, confidential
data and access to your system
when software and hardware are
damaged. Fortunately, there are Figure 151. Anti-Malware Application
a couple of preventive measures
you can take to protect yourself
from malware.

One thing you can do to scan the file for any virus infection before you
attempt to open it. If the scan shows nothing, it is probably a safe file. But
then again, it may be a new virus yet to be updated in your virus scan. You
can either wait and apply the next virus signature update and perform a
second scan or risk it all and open the file.

DISK MAINTENANCE

Did anyone tell you that your hard disk is a pretty tricky machine?
When you first installed your operating system, you may be pleased to know
how smooth and efficient your software applications are running. But
gradually, it slows down and this bothers you. What truly causes the decline
in performance? You may argue that your disk is just a couple of months old.
This has much to do with the way you operate on your system.

Try to imagine a big tool bucket filled with gadgets. Initially, the bucket
only contains a few spanners, a hammer and some screws. So every time
you search for a particular item, it is relatively easy to find. But soon as you
keep filling the bucket with all sorts of items and especially when the amount
of items grows, you will discover that you may need more time just to search

228

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

for a particular screw head. In such cases, uninstall any unnecessary

software and defragment your disk. Typically, your system performance will
decline when the amount of data in your hard disk starts to grow.

Figure 152. Disk Cleanup Window

Essay Writing Activity

Directions: Write an essay about the importance of Data Backup. Relate
your statements to the most treasured skills you acquired in the lesson. Give
also your own title for the essay (minimum of 400 words).

Contents Excellent (3) Good (2) Poor(1)

Spelling Almost all words spelled

correctly
Capitalization Begins all sentences but
one with uppercase
letters.
Punctuation Correct ending
punctuation in every
sentence but one.
Grammar Simple sentences are
grammatically correct.
Handwriting Legible. Good spacing
and alignment.
Total Points

229

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Research and Investigate

Directions: Form a group of five members and make a research on the
different advantages and disadvantages of data backup, malware
maintenance and disk maintenance. You can also interview/observe a
practitioner while lending a quality service in computer hardware servicing.
Report this to the class.

Demonstration
Application on Maintenance of Computer System

Directions: After the interview and observation with a practitioner, your group
will showcase what you have learned through a demonstration. You will be
rated base on the rubrics below:
Criteria Excellent Good Fair Poor
4 3 2 1
Content (40%)
-Conveys full
understanding of the
content
Enthusiasm (10%)
-Facial expression
and body language
generates strong
enthusiasm
Interest and
Purpose (10%)
-Displays interesting
purpose
Speak Clearly (10%)
-Group members
speaks clearly at all
times
Volume (10%)
-Loud volume
Preparedness (10%)
-Group is prepared
with props and
costumes
Cooperation (10%)
-displays teamwork

230

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

DIAGNOSIS AND IDENTIFICATION OF FAULTY SYSTEM

More than 70% of all computer problems are related to cabling and
connections. Ensure all cables are connected and connected firmly. IDE and
floppy ribbon cables and power cables can often go loose. Ensure
microprocessor, memory modules, and adapters such as video card are
inserted correctly and do not "pop-up" due to vibration.

Problem 1: System has no power at all. Power light does not illuminate,
fan inside the power supply does not turn on, and indicator light on
keyboard does not turn on.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Power cable is Visually inspect power Make sure power cable

unplugged cable. is securely plugged in.

Defective power Visual inspection or try

Replace cable.
cable another cable.

Power cable and wall

Power supply Contact technical
socket are OK, but
failure support.
system is still dead.

Use different socket,

Faulty wall outlet;
Plug device into repair outlet, reset
circuit breaker or
socket and test. circuit breaker or
fuse blown
replace fuse.

Problem 2: System is inoperative. Keyboard lights are on, power

indicator lights are lit, and hard drive is spinning.
PROBABLE CAUSE DIAGNOSIS SOLUTION

Expansion card is Turn off computer. Using even pressure

partially dislodged from Remove the cover of on both ends of the
expansion slot on the the system unit. expansion card, press
motherboard. Check all expansion down firmly on
cards to ensure they

231

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

are securely seated in expansion card.

slots.

Defective floppy disk Turn the system off. Contact Technical

drive or tape drive Disconnect the cables Support.
from one of the floppy
drives. Turn on the
system, check to see if
the keyboard operates
normally. Repeat until
you have located
defective unit.

Defective expansion Turn the computer off. Make sure expansion

card Remove an expansion card is secure in
card. expansion socket.

Problem 3: System does not boot from hard disk drive, but can be
booted from floppy disk drive.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Connector between When attempting to Check cable running

hard drive and system run the FDISK utility form disk to disk
board is unplugged. described in the HARD controller on the
DISK section of the board. Make sure
manual you get a both ends are
message, INVALID securely plugged in;
DRIVE check the drive type
SPECIFICATION in the Standard
CMOS Setup (in your
motherboard
manual).

Damaged Hard Disk or Format hard disk; if Contact Technical

Disk Controller unable to do so, the Support.
hard disk may be
defective.

Hard Disk directory or Run the FDISK Backing up the hard

FAT is scrambled program, format the drive is extremely
hard drive(See HARD important. All Hard
DRIVE section of Disks are capable of
manual). Copy your breaking down at any

232

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

backup data back onto time.

hard drive.

Problem 4: System only boots from Floppy Disk. Hard Disk can be read
and applications can be used, but booting from Hard Disk is impossible.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Hard Disk boot program Corrupted system files Back up data and
has been destroyed. applications files.
Reformat the Hard Drive
as described in the Hard
Drive section of the
manual. Re-install
applications and data
using backup disks.

Problem 5: Error message reading "SECTOR NOT FOUND" or other

error messages indicators that certain data is not allowed to be
retrieved.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Sector Not Found Error Hard drive is likely bad You may be able to
itself. resolve this issue by
running scandisk and
having scandisk mark
the sectors as bad.

Problem 6: Disk formatted on IBM PS/2 will not operate with this system.

PROBABLE CAUSE DIAGNOSIS SOLUTION

The IBM PS/2 uses a IBM PS/2 disk format Format disk in the AT
different format than will not work in an AT type computer. Insert disk
other computers. type computer. into the IBM PS/2 and
copy the files you wish.

Problem 7: After installing an expansion card (network card, tape drive

card, etc.), the system no longer works properly.

233

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

PROBABLE CAUSE DIAGNOSIS SOLUTION

Monitor has no power. All or part of the system Change the interrupt or
may be inoperable. The RAM address on the new
new card may work but expansion card. See the
a mouse or COM port documentation that came
may not work. with the new card in order
to change pin settings.
Many expansion devices
come with proprietary
software that will assist
you in doing this.

Problem 8: Screen message says "Invalid Configuration" or "CMOS

Failure."

PROBABLE CAUSE DIAGNOSIS SOLUTION

Incorrect information has Review system's

Check the configuration
entered into the equipment. Make sure
program. Replace any
configuration (setup) correct information is in
incorrect information.
program. setup.

Problem 9: Screen is blank.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Monitor has no power. Power connectors may Check the power

be loose or not plugged connectors of the monitor
in. and the system. Make sure
monitor is connected to
display card, change I/O
address on network card if
applicable.

Monitor is not connected See connections of the

to computer. video cable from the video
adapter card going to the
monitor.

234

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Problem 10: System does not boot from hard disk drive, but can be
booted from floppy disk drive.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Check cable running form

When attempting to run
disk to disk controller on
the FDISK utility
the board. Make sure both
Connector between hard described in the HARD
ends are securely
drive and system board DISK section of the
plugged in; check the
unplugged. manual you get a
drive type in the Standard
message, INVALID
CMOS Setup (in your
DRIVE SPECIFICATION.
motherboard).

Problem 11: Memory Module Problem

PROBABLE CAUSE DIAGNOSIS SOLUTION

Memory problem, display Loose installation of the Reboot computer. Re-

card jumpers one not set RAM on the memory slot install memory, make sure
correctly. that all memory modules
are installed in correct
sockets. Check jumper and
switch settings on display
card. See display card
section for information of
settings.

Computer virus Computer system Use anti-virus programs

becomes too slow and (McAfee/PC-cillin, E-port,
experiencing hang-up. etc.) to detect and clean
viruses.

Problem 12: Screen goes blank periodically.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Screen saver is enabled. Disable screen saver.

235

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Problem 13: Keyboard failure

PROBABLE CAUSE DIAGNOSIS SOLUTION

Reconnect keyboard.
Loose keyboard cable Check keys again if there
Keyboard is disconnected.
connection is no improvement,
replace keyboard.

Problem 14: No color on screen

PROBABLE CAUSE DIAGNOSIS SOLUTION

Faulty monitor If possible, connect

monitor to another system.
If no display, replace
monitor.

Problem 15: Floppy drive light stays on.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Reconnect floppy cable

making sure PIN1 on the
Floppy Drive cable is not Shorted power wire for
Floppy Drive corresponds
connected correctly. floppy
with PIN1 on floppy cable
connector.

Problem 16: Error reading drive A:

PROBABLE CAUSE DIAGNOSIS SOLUTION

Bad floppy disk Try new floppy disk.

Floppy disk is not Format floppy disk (type

formatted. ENTER)

236

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Problem 17: Windows system drive failure

PROBABLE CAUSE DIAGNOSIS SOLUTION

SETUP program does Boot from drive A: using

not have correct DOS system disk. Input
information. correct information to
SETUP program.

Hard Drive cable is not Check Hard drive cable.

connected properly.

Problem 18: Cannot boot system after installing second hard drive.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Master/Slave jumpers are Set master /slave

not set correctly. jumpers correctly.

The Hard Drive is Run SETUP program and

incompatible. select correct drive types.
Call drive manufacturers
for compatibility with
other drives.

Problem 19: Missing operating system on Hard Drive

PROBABLE CAUSE DIAGNOSIS SOLUTION

CMOS setup has been Run setup and select

changed. correct drive type.

Problem 20: Certain keys do not function.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Keys are jammed or Replace keyboard.

defective.

237

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Problem 21: Keyboard is locked, no keys function.

PROBABLE CAUSE DIAGNOSIS SOLUTION

Keyboard is locked. Unlock keyboard.

Critical Review: Problems Encountered

Directions: In this activity, list down at least five (5) problems, error
messages or incidents you encountered while working or using a computer
and the actions taken in every problem/error message or incidents
encountered.

Problems Encountered Actions Taken

1.
2.
3.
4.
5.

Slide Show Presentation

Directions: In this activity, you will learn how useful the Internet can be for a
Personal Computer (PC) support technician.
1. Using a personal computer, pretend that the motherboard manual is not
available and you need to replace a faulty processor. Identify the
manufacturer and model of the motherboard by looking for the manufacturer’s
name and model number stamped on the board. Research the Web site for
that manufacturer. Print the list of processors the board can support.
Afterwards, make a slide show presentation and report it to the class.

238

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Video Tutorials
Application on Diagnosis of Faulty Systems

Directions: In this activity, your class will be grouped into three (3) and will
make an interview and observation with a practitioner. The group will
showcase what they have learned through a video demo or tutorials. Use
digital cameras or cellphones on recording the video. You will be rated based
on the rubrics written below:
Criteria Excellent Good Fair Weak
4 3 2 1
Content (40%)
-Conveys full
understanding of
the content
Enthusiasm (10%)
-Facial expression
and body language
generates strong
enthusiasm
Interest and
Purpose (10%)
-Displays
interesting purpose
Speak Clearly
(10%)
-Group members
speaks clearly at all
times
Volume (10%)
-Loud volume
Preparedness
(10%)
-Group is prepared
with props and
costumes
Cooperation (10%)
-Displays teamwork

239

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Diagnostic Software Tools

Diagnostic software is used to identify problems on a computer or
piece of equipment. These programs test the onboard systems for issues and
help to alert users of potential problems or breakdowns. Over the years, these
programs have gone from very basic to complex and highly specialized. With
this increase in technology, the skill required to use the software has actually
decreased to the point where most people can use this software with little or
no training.
Programs that provide
diagnostic information are
common everywhere.
Something as simple as the oil
light on a car dashboard is a
type of diagnostic software.
These hard-coded diagnostic
tools usually monitor one
specific part of a larger piece
of equipment and typically are
always operating. While these
types of diagnostic programs
are the most common, they are Figure 149: Defragmentation and Optimization
usually the least versatile. of hard drive
When people think of true
diagnostic software, they usually think of the types used on computers. These
programs monitor the computer for problems involving every aspect of the
machine, from hardware to software—far more complex and versatile than
the change oil light.

Since the introduction of diagnostic software, it has evolved in many

ways. The original type could only find the most major of problems. There
should be strong indicators or physical damage in order for the software to
recognize and report the problem. When computers became more common in
people's homes, particularly with the rise of Disc Operating Systems,
commonly known as DOS, diagnostic software became more common. Small
built-in programs, such as Checkdisk (CHKDISK), allowed users to perform

240

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

basic diagnostic routines on their systems. These early programs would often
output technical information and esoteric error codes instead of readable
information. In recent years, the output reports have changed considerably.
The basic outputs are now readable by most users, and they often contain
tips or warnings telling users what they should or should not do, all in plain
language.

Technological advances have even made Web page-based diagnostic

software available for home users. With minimal Web searching, nearly any
home user can find a wide range of websites offering to speed up their
computer or diagnose problems. Many of these sites are scams, so
consumers should perform proper research before using them. General
Internet searches can provide a number of resources to check a company's
credibility.

Some Downloadable Diagnostic Tools

Yet Another Cleaner

Protects your PC from browser hijacker, malicious plug-ins,

malwares, adware, various viruses

ARO 2013
Repairs registry errors, remove "junk" files, and ensure your PC is
fully protected

RegDoctor
Improves your system performance and stability by repairing and
cleaning the Windows Registry

Wise Registry Cleaner

Cleans the registry portion of the hard drive

Advanced System Care

Tunes up and maintains your PC, with anti-spyware, privacy
protection, and system cleaning functions.

CPU-Z
Accesses various information's about your computer

241

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Advanced System Care Pro

Tunes up and maintains your PC automatically

Free Window Registry Repair

Scans, repairs, and optimizes your Windows registry

Disk management tools:

 Fdisk - creates and deletes disk partitions.
 Format - prepares a hard drive prior to use.
 Scandisk or Chkdsk - checks for physical errors on the disk surface.
 Defrag - optimizes use of space on a disk.
 Disk Cleanup - removes unused files.
 Disk Management - creates partitions and formats disks (GUI
interface).
 System File Checker (SFC) – scans the operating system critical files.

Procedure in Cleaning
Hardware Components

Cleaning your computer

and its components and
peripherals helps keep the in
good working condition and
helps keep the computers from
spreading germs.

Figure 150: Cleaning Schedule

242

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

How often should I clean my computer?

The frequency of how often you should clean your computer varies on
several different factors. To help you determine how often you need to clean
your computer, we have created the chart below. Check the appropriate
boxes below that apply to your computer’s environment to determine how
often it should be cleaned.

General Cleaning Tips

Below is a listing of general tips that should be taken when cleaning any of
the components or peripherals of a computer, as well as tips to help keep a
computer clean.

1. Never spray or squirt any liquid onto any computer component. If a

spray is needed, spray the liquid onto a cloth and then use that cloth to
rub down the component.
2. You can use a vacuum to clean up dirt, dust, or hair around the
computer on the outside case. However, do not use a vacuum for the
inside of your computer as it generates a lot of static electricity that can
damage the internal components of your computer. If you need to use
a vacuum to clean the inside of your computer, use a portable battery
powered vacuum designed to do this job or try using compressed air.
3. When cleaning a component or the computer, turn it off before
cleaning.
4. Be cautious when using any cleaning solvents; some individuals may
have allergic reactions to chemicals in cleaning solvents and some
solvents can even damage the case. Try to always use water or a
highly diluted solvent.
5. When cleaning, be careful not to accidentally adjust any knobs or
controls. In addition, when cleaning the back of the computer, if
anything is plugged in, make sure turn off the PC and unplug the
power cable.
6. When cleaning fans, especially the smaller fans within a portable
computer or laptop it is suggested that you either hold the fan or place
something in-between the fan blades to prevent it from spinning.
Spraying compressed air into a fan or cleaning a fan with a vacuum
may cause damage or back voltage to be generated.
7. Never eat or drink around the computer area.

243

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Cleaning Tools

Although many companies have created products to help improve the

process of cleaning your computer and peripherals, you can also use
household items to clean your computers and peripherals. Below is a listing of
items you may need to use while cleaning your computer or computer
peripherals.

Keep in mind that some components in your computer may only be

cleaned using a product designed for cleaning that component.

 Cloth - A cloth is the best tool used when rubbing down a component;
although paper towels can be used with most hardware, we
recommend using a cloth whenever possible. Caution: It is
recommended that you use a cloth when cleaning components such as
the outside of the case, a drive, mouse, etc. You should not use a cloth
to clean any circuitry such as the RAM or motherboard since they can
generate Electro Static Discharge (ESD) that can damage electronics.
 Water or rubbing alcohol - When moistening a cloth, it is best to use
water or rubbing alcohol. Other solvents may be bad for the plastics
used with your computer.
 Portable Vacuum - Sucking the dust, dirt, hair, cigarette particles, and
other particles out of a computer can be one of the best methods of
cleaning a computer. Over time, these items can restrict the airflow in a
computer and cause circuitry to corrode. Do not use a standard
vacuum as it can generate a lot of static electricity that can damage
your computer.
 Cotton swabs - Cotton swabs moistened with rubbing alcohol or water
are good for wiping hard to reach areas in your keyboard, mouse, and
other peripherals.
 Foam swabs - It is Always better to use lint-free swabs such as foam
swabs.

Procedures in Cleaning Hardware Components

Case cleaning

Why do we need to clean the computer case regularly? It keeps

the appearance of the computer looking new. During cleaning, if ventilation
locations are found, these can be cleaned helping the case keep a steady

244

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

airflow to the computer, keeping components cool and in good working

condition.

Procedures:

1) The plastic case that houses the PC components can be cleaned with
a lint-free cloth that has been slightly dampened with water. For
stubborn stains, add a little household detergent to the cloth. It is
recommended that you never use a solvent cleaner on plastics.
2) Make sure all vents and air holes are hair and lint free by rubbing a
cloth over the holes and vents. It is also helpful to take a vacuum
around each of the hole, vents, and crevices on the computer. It is safe
to use a standard vacuum when cleaning the outside vents of a
computer. However, if you need to clean the inside of the computer,
use a portable battery powered vacuum to prevent static electricity.

CD-ROM, DVD, and other disc drive cleaning

Why do we need to clean disc drives? A

dirty CD-ROM drive or other disc drives can
cause errors when reading discs. These
read errors could cause software installation
and other issues while running the program.

Procedure: To clean the CD-ROM drive, it

is recommend to purchase a CD-ROM
cleaner from your local retailer. Using a
CD-ROM cleaner should sufficiently clean
the CD-ROM laser from dust, dirt, and Figure 151. Disk Cleaner
hair.

In addition to cleaning the drive with

a special disc designed to clean drives,
you can also use a cloth dampened with
water to clean the tray that ejects from the
drive. Make sure however, that after the
tray has been cleaned, it has to be
completely dried before putting the tray
back into the drive.

245
Figure 152. Disc Cleaning

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

CD and DVD disc cleaning

Why do we need to clean disc? Dirty CDs can cause read errors or total
malfunction.

Procedure: Cleaning CDs and DVDs should be done with a cleaning

kit but can also be done with a normal clean cotton cloth or shirt. When doing
this with a clean cotton cloth or shirt, wipe against the tracks, starting from the
middle of the CD or DVD and wiping towards the outer side as shown in the
below picture. Never wipe with the tracks; doing so may put more scratches
on the disc.

It is recommended to use water when cleaning a CD. However, if the

substance on a CD cannot be removed using water, pure alcohol can also be
used.

Hard drive cleaning

Why do we need to clean a hard drive? While hard drives cannot be

cleaned physically, they can be cleaned with various utilities on the computer
to help it run fast and more efficiently. Disk Management is one of the utilities
that will prevent the hard drive from slowing down.

Procedure: Disk Management can be accessed in the Control Panel,

look for Administrative Tools, then double-click on the Computer Management
icon. In the System and Security window, click on the Administrative Tools. In
the Administrative Tools window, double-click on the Computer Management
icon.

When Computer Management opens, click on Disk Management on

the left side of the window, located under Storage. After a brief loading period,
Disk Management should now appear on the right side of the Computer
Management window.

Keyboard cleaning

Why do we need to clean the keyboard? The computer keyboard is often

the most germ infected item in your computer. Often, it will contain more
bacteria than your toilet seat. Cleaning it can help remove any dangerous

246

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

bacteria. Dirt, dust and hair can also build up causing the keyboard to
malfunction.

Procedure: Before cleaning the keyboard, turn off the computer or

unplug the USB keyboard. Not unplugging the keyboard can result in causing
other computer problems as you may press keys that cause the computer to
perform an unwanted task.

Many people clean the keyboard by turning it upside down and

shaking. A more effective method is to use compressed air. Compressed air
is pressurized air contained in a can with a very long nozzle. Aim the air
between the keys and blow away all of the dust and debris that has gathered
there. A vacuum cleaner can also be used, but make sure the keyboard does
not have loose "pop off" keys that could possibly be drawn up by the vacuum.

After the dust, dirt, and hair had been removed spray a disinfectant
onto a cloth or use disinfectant cloths and rub each of the keys on the
keyboard. As mentioned in our general cleaning tips, never spray any liquid
onto the keyboard.

Substance spilt into the keyboard

Below are a few recommendations to help prevent a keyboard from

malfunctioning once a substance has been spilt within it.

If anything is spilt onto the keyboard turn the computer off immediately
or at the very least disconnect it from the computer. Then, flip the keyboard
over helping to prevent the substance from penetrating the circuits. While the
keyboard is upside down, shake the keyboard over a surface that can be
cleaned later. While still upside down, use a cloth to help clean out what can
be reached. After you have cleaned it to the best of your ability, leave the
keyboard upside down for at least one night allowing it to dry. Once dry,
continue cleaning the keyboard with any remaining substances.

If after cleaning the keyboard you have keys that stick, remove the
keys and clean below the keys and the bottom portion of the key.

Finally, if the keyboard still works but remains dirty or sticky, try
washing the keyboard in the dishwasher.

247

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

If after doing all the above steps the keyboard does not function properly or at
all, it is recommended you buy a new keyboard.

LCD screen cleaning

Why do we need to clean the LCD screen? Dirt, dust, and finger prints can
cause the computer screen to project blurry images/texts.

Procedure: Unlike a computer monitor, the LCD or flat-panel display is

not made of glass, it therefore requires special cleaning procedures.

When cleaning the LCD screen, it is important to remember not to

spray any liquids onto the LCD directly. Press gently while cleaning, and do
not use a paper towel as it may cause the LCD to gather scratches.

To clean the LCD screen, use a non-rugged microfiber cloth, soft

cotton cloth, or swiffer duster. If a dry cloth does not completely clean the
screen, you can apply rubbing alcohol to the cloth and wipe the screen with
the damp cloth. Rubbing alcohol is used to clean the LCD before it leaves the
factory.

Monitor cleaning

Why do we need to clean the monitor? Dirt, dust, and fingerprints can
cause the computer screen to project blurry images/texts.

Procedure: The glass monitor screen can be cleaned with ordinary

household glass cleaner. Be sure to remove power from the monitor and
spray the cleaner onto a lint-free cloth so the fluid does not leak into the
electrical components inside the monitor. Vacuum off any dust that has
settled on top of the monitor, and make sure no books or papers have been
placed on the air vents. Obstructed monitor vents can cause the monitor to
overheat or even catch fire.

Caution: We suggest using a cloth dampened with water when

cleaning monitor or a screen that is not made of glass or has any anti-glare
protection on the screen. Using ordinary household glass cleaner on special
screens, especially cleaners with ammonia can remove anti-glare protection
or other special surfaces.

248

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Other good cleaning tools

 Microfiber Towels
 Swiffer Dusters

Motherboard cleaning

Why do we need to clean the motherboard? Dusts can build up and

corrode circuitry causing various problems such as computer lockups.

Caution: When working with interior computer parts (e.g.

motherboard), take the necessary ESD precautions and avoid unplugging any
cables or other connections.

Procedure: Compressed air is recommended when cleaning the

motherboard from dust, dirt, or hair. When using compressed air, hold it in the
up-right position; otherwise, it is possible that chemicals may come out of the
container that could damage or corrode the motherboard or other component
within the computer. Also, make sure to always blow the dust or dirt away
from the motherboard, or out of the case.

Another good alternative to compressed air is to use a portable battery

powered vacuum that can effectively remove the dust, dirt, and hair from the
motherboard completely and prevent it from getting trapped within the case.
However, do not use a standard electric vacuum as it can cause a lot of static
electricity that can damage the computer. When using the vacuum, it is vital
that you stay a couple of inches away from the motherboard and all other
components to help prevent contact as well as to help prevent anything from
being sucked into the vacuum. Ensure that you do not remove any small
components with the vacuum such as
jumpers.

Optical Mouse cleaning

Why do we need to clean optical mouse

regularly? A dirty mouse (mouse with a ball)
can be difficult to move. It can also cause
strange mouse movement.

Figure 153. Optical Mouse

249

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Procedure: To clean the optical

mouse, you must first wipe the bottom cover
of the mouse. Turn the mouse upside down to
look at the lens.

If there is a smudge on the lens, gently

clean the area with a plain cotton-tipped
swab. If there is debris in the lens, gently blow
the debris away from the area. Check the
Figure 154. Cleaning
surface on which you are using the mouse.
Optical Mouse
Note: Cleaning your mouse pad with a damp cloth can also help
improve a computer's mouse movement.

Why? To help keep a mouse clean and germ free it can be helpful to clean
the mouse.

Procedure: Use a cloth moistened with rubbing alcohol or warm water and
rub the surface of the mouse and each of its buttons.

Mechanical mouse cleaning

Why is it important to clean an

optical mouse? A dirty optical-mechanical
mouse (mouse with a ball) can be difficult to
move. It can also cause strange mouse
movement.

Procedure: To clean the rollers of

an optical-mechanical mouse, you must first
remove the bottom cover of the mouse. To
Figure 155. Mechanical Mouse do this, examine the bottom of the mouse to
see what direction the mouse cover should
be rotated. As you can see in the illustration
below, the mouse cover must be moved
counter clockwise. Place two fingers on the
mouse cover and push the direction of the
arrows.

250

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Once the cover has rotated about an

inch, rotate the mouse into its normal
position, covering the bottom of the mouse
with one hand and the bottom should fall off
including the mouse ball. If this does not
occur, attempt to shake the mouse gently.

Once the bottom cover and the ball are

removed, you should be able to see three
rollers located within the mouse. Use a cotton
Figure 156. Mouse Opening swab, finger, or fingernail to remove any
substance. Usually, there will be a small line
of hair and dirt in the middle of the roller, remove as much as this substance
as possible.

Once you have removed as much dirt and hair as possible, place the
ball back within the mouse and place the cover back on.

If the mouse still appears to be having the same issue, repeat the
above process. If after several attempts the mouse is still having the same
issues, it is likely that your mouse has other hardware issues and we
recommend that it be replaced.

Note: Cleaning your mouse pad with a damp cloth can also help
improve a computer's mouse movement.

Why do we need to do this? To help keep a mouse clean and germ

free.

Procedure: Use a cloth moistened with rubbing alcohol or warm water

and rub the surface of the mouse and each of its buttons.

Printer cleaning

With some printers it may be necessary to

clean the inside of the printer to help keep the
printer running smoothly.

Figure 157. Printer Cleaning

251

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Why do we need to do this? Cleaning the outside of a printer can help keep
the printer's appearance looking good; and in the case of a printer that is used
by many different people, it will keep the printer clean and free from germs.

Procedure: First, make sure to turn off the printer before cleaning it.
Dampen a cloth with water or rubbing alcohol and wipe the case and each of
the buttons or knobs on the printer. As mentioned earlier, never spray any
liquid directly onto the printer.

Scanner cleaning

Why do we need to do
this? Flatbed scanners
commonly become dirty with dust,
fingerprints, and hair. When a
scanner is dirty, the images may
have distortions.

Procedure: Clean a flatbed

scanner's surface by spraying a
window cleaner onto a paper Figure 158. Scanner Cleaning
towel or cotton cloth and wipe the
glass until clean. As mentioned earlier, never spray a liquid directly onto the
component.

To clean the outside of the scanner, the same towel or cotton cloth can
be used.

Miscellaneous Cleaning Steps

Below are listings of miscellaneous computer hardware that is rarely

used today, but some people who will use it and therefore need to know how
to clean their devices.

Floppy drive cleaning

Why do we need the floppy drive? Because dirty read/write heads

on the floppy drive can cause errors during the reading or writing process.

252

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Procedures: The floppy drive can be cleaned in two different ways.

The first method of cleaning a floppy drive; (and our recommended method) is
to purchase a kit at your local retail store designed to clean the read/write
heads on your floppy drive.

The second method of cleaning the floppy drive is only recommended

for experienced computer users. Open the floppy drive casing and physically
swab the read/write heads with a lint-free foam swab soaked in pure alcohol,
or trichloroethane. When performing these steps, be extremely careful when
cleaning the heads to ensure that you do not lock them out of alignment
causing the floppy drive not to work. To help prevent the heads from
becoming out of alignment, use a dabbing motion lightly putting the swab on
the head and removing it, do not perform a side-to-side motion with the swab.

Ways to Improve your Computer's Performance

Disk Defragmentation

Fragmentation makes your hard disk do extra work that can slow down
your computer. Removable storage devices such as USB flash drives can
also become fragmented. Disk Defragmenter rearranges fragmented data so
your disks and drives can work more efficiently. Disk Defragmenter runs on a
schedule, but you can also analyze and defragment your disks and drives
manually.

When you store data into the hard disk, the data will normally occupy
the disk in continuous manner if there is sufficient data space on disk.
Imagine if you delete some data files, this will then leave some "gaps" in data
space. When new data files need to be stored and if the size of these data
files could not fit into a single gap, the data files will be segmented and fitted
across several gaps with interval. Your hard disk progressively becomes
fragmented after excessive usage of writing, deleting and storing of data into
your disk.

253

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

A file is typically broken into several small parts and stored in various
areas on a hard disk. When a read request is executed, the disk will search
for the multiple pieces, process and link them and finally present it on screen
from the computer when you read a file or execute an application.

Besides improvement in system performance, disk defragmentation

will also improve data recovery yield in case your disk needs to be sent in for
recovery process.

For a similar reason, you should not perform defragmentation after

accidental data deletion as this will overwrite the deleted data when data
blocks are moved or replaced.

To defrag your hard disk, follow these steps:

1. Open Disk Defragmenter by clicking the Start button. In the

search box, type Disk Defragmenter, and then, in the list of results,
click Disk Defragmenter.
2. Under Current status, select the disk you want to defragment.
3. To determine if the disk needs to be defragmented or not, click
Analyze disk. If you are prompted for an administrator password or
confirmation, type the password or provide confirmation.

Once Windows is finished analyzing the disk, you can check the
percentage of fragmentation
on the disk in the Last Run
column. If the number is
above 10%, you should
defragment the disk.

4. Click Defragment disk. If

you are prompted for an
administrator password or
confirmation, type the
password or provide
confirmation.
Figure 159. Disk Defragmenter
Disk Defragmenter might take
from several minutes to a few hours

254

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

to finish, depending on the size and degree of fragmentation of your hard

disk. You can still use your computer during the defragmentation process.

Notes:

 If the disk is already in exclusive use by another program or is

formatted using a file system other than NTFS file system, FAT, or
FAT32, it cannot be defragmented.
 Network locations cannot be defragmented.
 If a disk that you are expecting to see under Current status is not
showing up there, it might be because it contains an error. Try to repair
the disk first, then return to Disk Defragmenter to try again.

Cleaning Windows Registry

Registry is a system-defined database which is used by an Operating

System to store all the information needed to configure the Windows settings
for 1 or more users, applications and hardware devices. Information
contained in registry includes user's profiles, application installed on the
computer, types of documents that are created, setting of properties sheet for
each application folder and icon, existing hardware in the system, and all the
ports that are being used.

Why Cleaning the registry is important

When using the computer, users may have experienced quite a
number of problems relating to registry issues that may result in severe
consequences such as error messages pop-up, noticeably slow performance
of a system or even system crash. The reasons leading to these problems,
however, are mainly caused by missing or invalid registry key(s) from the
Windows registry.
Usually, when any particular application is uninstalled from Windows, it
is recommended that you should use Add or Remove Programs feature to
proceed (Start menu>Control Panel >Add or Remove Programs) However, if
you delete any program manually without using this function, you might
mistakenly move away the registry key in the OS or even leave behind the
orphaned registry key. This, of course, will cause the problem of missing/
invalid registry entries. Other actions include deletion of startup programs,
installation of software embedded with spyware or changes in hardware.
And because of the above reasons, cleaning Windows registry has
become an essential and crucial action that you need to implement regularly.

255

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Do it regularly or you might experience losing all important data due to the
system breakdown.

Can I Delete The Registry By Myself?

The answer is "No". When you attempt to remove the registry by your
own, the risk that you may remove the valid registry is high because without
the registry cleaner software, it is not easy to determine which registry
belongs to which application. Therefore this may cause the system to crash or
the software to malfunction.

How Do I Clean Windows Registry?

You can either buy Windows Registry cleaner software available in the
market or download a free trial package from the Internet to try out before
paying a full version. When run, this software will first identify the problems
with your Windows registry such as missing/invalid key references. After that,
it will proceed to probe your request for registry removal.

Below are some basic and useful features that you must consider
when choosing the Registry Cleaner software:

 ability to scan for the whole computer system for invalid/ orphan
registry
 ability to backup all the current registry in the system
 have an "undo" feature to restore the cleaning action
 options on which to choose registry key(s) to be deleted
 online updating of the software should be available

Now, with the software running regularly, it will have saved up a large
amount of disk space for your PC. The system then will run as smoothly and
efficiently like before.

Organizing Disk Drive Partition

What is Disk Partitioning?

Partitioning creates a logical file structure on your hard disk so as to

divide various portions of a hard disk to be used for different purposes such
as a dual operating systems, storage or organizational purposes.

256

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Why Partition Your Disk?

Partitioning your hard disk helps categorize your files into logical
groupings so that you can search for files and make changes more
effectively. Folders are made for the same reason too. But partitioning
provides better security.

Security

Most default primary partition is the C drive. This is the drive where
your operating system and most other software applications are installed in. A
useful way of protecting your data is to store your personal information into a
separate disk partition. For example, if you are using a 80GB hard disk, you
might want to partition it into two drives - drive C & drive D. Drive C will
contain your operating system files and software applications such as your
Microsoft Office Suite, Adobe Acrobat, Antivirus, Photoshop etc., while drive
D can be configured as a storage drive to store all your document files, JPEG,
MP3 and other personal data.

It is understood that your most important files are those that are difficult
or virtually impossible to replace. For example, if Microsoft Word crashes, you
can always reinstall the application to make it work again. However, if your
document files are corrupted by a virus or worm, you may need to spend
money and precious time trying to recover your data. In some cases, you may
not be able to recover them if the damage is too severe. Statistics have
shown that most viruses and worms are more likely to infect executable and
system files compared to your MP3 or excel spreadsheets. Therefore, if one
partition corrupts, only that partition suffers and hopefully not the whole drive.

Convenience

Another reason for storing your document files in a separate drive is

the ease of manageability. Say in a scenario where your computer needs to
be reformatted due to severe corruption, you can easily reformat drive C and
be assured that all your documents in drive D remains intact. This will save
you time trying to backup your documents, then restoring them back in your
local drive after your computer is reformatted and starts working. In this way,
should you decide to refresh your operating system or application, the stored
data will not be affected.

257

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Dual Operating System

You may wish to install more than one operating system into your
computer. For example, you need to use a Windows and Linux operating
system. But both are unable to be installed in the same partition. By
partitioning the disk, you separate two logical spaces to include each
individual OS.

Evaluating your Needs

Ask yourself the following questions to help you determine the kind of
partitions to create:

1. Do you work more on documents than on software?

2. Does your job require you to install multiple software applications?
3. Does the size of your software exceed that of your documents?

The objective here to is to study the space ratio to allocate for each
partition. The choice of how you partition your disk is important because it
affects both disk performance and efficiency. If you are a designer or sound
engineer given a computer with 80GB of disk space, you probably would want
to assign 25GB of capacity to your primary disk and 55GB to a secondary
drive to contain all your media files. You can always adjust this ratio
according to your needs. On the other hand, if you are a software tester or a
hardcore gamer, you would probably choose to assign 50GB to your primary
disk and 30GB to the secondary drive for storage. Again, there is no fixed rule
or a standard template and much is directly dependent on your needs and
how you operate.

Defragmentation Issue
Direction: In this activity, you will list down at least five importance of
defragmentation and partitioning and its effect a computers performance.

258

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

UNDERSTANDING PARTITIONS

The master boot record is the first register that resides in your hard
disk. It is located at the first sector of the disk and the first program that runs
each time you power up your computer. The master boot record contains two
important structures - the master boot code and the master partition table.
Both provide instruction and information and how your computer boots up.
Due to its structure, a single hard disk is limited to four primary partitions. One
of it will be assigned as the active partition to contain your operating system.
Simply, You can create four primary partitions, or three primary partitions and
one extended partition which can be subdivided into multiple logical partitions.

For example, you may want to split your 80GB disk as follows:

 40GB primary partition for your OS and software applications

 10GB for MP3 files
 15GB for Document files
 5GB for Miscellaneous files
 10GB for Archival files

First, you create a 40GB primary partition. This will occupy the first of the
4 partitions. Then you can create a 40GB extended partition. And within the
extended partition, you create four logical partition - 10GB, 15GB, 5GB &
10GB. So the result of this will be a C drive (40GB), D drive (10GB), E drive
(15GB), F drive (5GB) and an H drive (10GB).

MAKING A DISK IMAGE BACKUP

Making a duplicate image or cloning a drive is often used in data

recovery to ensure that the original media where data has been lost is
untouched while recovery is done on the cloned drive.

It can also be used as a backup procedure. However, it is risky

because all the data duplicated will be along with whatever viruses and
malware that infected the drive.

259

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

BACKUP

Creating a backup of files is one of the most important things people

do not do, even though it should be their top priority.

Never recover lost data on the original media. Make a copy or image of
it on another storage media, and recover from that copy.

Check Mode of Failure

Before you engage in any self-recovery jobs, do the following first:

 Check if you have heard any sound prior to your data loss.
 notice if the performance of the system degrade.
 Encountered any problems while opening files, folders or saving.

This is simply to make sure that the loss is logical in nature, and not
physical. If you encounter any data loss arising from physical data loss,
please send it to a professional data recovery outfit.

DUPLICATION - Disk Image Backup

Once you have installed the additional storage media, it is time to duplicate it.

For that, you can use a free software - ADRC Data Recovery Tools.

1. Download and unzip the program. Installation is not required.

2. Run the software.

3. Under tools, choose the option

"Image Backup/Restore".

Figure 160. Image Backup / Restore

260

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

4. There are two radio buttons. Select "Create Image From Disk".

Figure 161. Create Image from Disk

5. Then, in the lower drop down menu, select the drive you want to clone.

Figure 162. Image Disk Drop-Down Menu

6. Save and indicate an image file name.

Figure 163. Filename for Image File

261

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

7. Then wait for the operation to finish.

Figure 164. Progress Bar

Copy Disk Image to Another Drive

1. Once you have created the disk image, you need to copy the image to
another drive.
2. Using the same software, under tools, select "Image Backup/
Restore".

Figure 165. Image Backup / Restore

3. There are two radio buttons. Select "Store Image Disk".

Figure 166. Store Image to Disk

4. Under "Image File", browse for the image you just created.

5. Then specify the drive you want to extract the image to be cloned.

262

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Figure 167. Filename for Image

6. The drive you choose will have all its data destroyed. Be warned.

Figure 168. Confirmation Window

7. Click "Yes", and transfer of image to disk will be completed.

Critical Review
Now, that you are done with the disk image, read more about disk
image through ICT books and other resources. You should consider the
following topics for research:
1. Acronis True Image
2. Norton Ghost Image
3. Other disk Image backup software

263

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Online Review
After the research, watch this video presentation using the URL below:
https://www.youtube.com/watch?v=rS616jQOURg

Answer the following questions:

1. What do we need to back-up?
2. Why you need to back-up in the same drive?
3. What other storage media is mentioned on the video?
4. Why is it important to create a system repair disc?
5. What are the different system recovery options?

How to Scan Disk

Scan Disk is one of the most common maintenance tools bundled with
an operating system. This is an application that checks the computer’s hard
drive for errors and bad sectors. Once Scan Disk finds an error in the hard
drive, it will attempt to fix it.

There are a number of reasons for the errors found inside a hard drive
and these include:

 frequent system crashes;

 critical system applications that have been improperly closed; and
 the existence of harmful programs such as viruses, trojans, etc.

What Does Scan Disk Do?

Scan Disk is designed to repair damaged hard drive sectors and
clusters on your computer’s hard drive. Majority of errors detected with the
utility programs permit the application to recover the data stored in the
damaged regions of the hard drive. When Scan Disk finds a bad or damaged
cluster during a scan, it will move the information stored in that cluster to a
new location on the computer’s hard drive. Scan Disk also checks and repairs
the integrity of file systems such as FAT, FAT32, and NTFS.

264

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Scan Disk requires exclusive

access to a drive when it executes.
Hence, if one or more of the files are
open on the drive that you want to scan,
Scan Disk may display a prompt asking
if you want to schedule the drive check
the next time you restart your computer.

Once Scan Disk finishes its task,

Figure 169. Scan Disk Window
it provides a report that contains the
errors it has found and the amount of disk space it has scanned. It is therefore
important for users to use the Scan Disk application because it ensures that their
data is safe from being corrupted. Aside from this, there is a guarantee that their
computer will perform at optimum levels.

The earliest Scan Disk version appeared in MS DOS 6.2. In Windows 95

and 98, Scan Disk was given a graphical user interface (GUI). In this graphical
environment, the user can find:

 progress bars
 buttons
 information regarding the status of the scan and the errors (if any)

How to Run Scan Disk in Windows

2000 and Windows XP

 Press the Start button on

desktop.
 Double click on My Computer.
 Highlight the disk to be scanned
for bad sector on the list of Hard
Disk Drives.
 Open the File menu and select
Properties option.
 Select the Tools tab.
 Click the Check Now button.
 The scanning process will then
initiate. Figure 170. Disk Defragmenter window

265

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

How to Run Scan Disk in Windows Vista

 Click the Computer icon on the desktop.

 Right click the drive to be scanned with Scandisk and select
Properties.
 Click on the Tools tab. Under the Error-checking sub heading, click the
Check Now button.
 A window named Check Local Disk will appear. To attempt to correct
errors, check the Scan for and attempt recovery of bad sectors
checkbox.
 Click Start to initiate the disk scan. In Vista, it is required to schedule
the Scandisk to run at boot time as Vista has mechanisms that do not
allow it to run while the system is operating.

Run Scan Disk on Windows 7

In the deployment of Windows 7, the Scan Disk utility underwent a

name change and is now called “CHKDSK” that performs the same functions
as the legacy application for the Operating System.

Run CHKDSK Using the Graphical User Interface (GUI)

Step 1 – Select the “Computer” option from the Start menu.

Step 2 – Right click the drive to check for errors followed by clicking the
“Properties” menu button.
Step 3 – Select the “Tools” menu option followed by the “Check Now”
menu button.

If the computer drive is in use, the Operating System will display a

dialogue menu asking if you desire to schedule a full scan in the future.

Run CHKDSK from the DOS Command Prompt

Alternatively, CHKDSK can be run from the DOS or Command prompt

on the Windows 7 OS.

Step 1 – Open the DOS prompt on your computer by selecting the “Start”
and “Run” menu options.
Step 2 – Enter “cmd” followed by the “enter” key to open the command
prompt.
Step 3 – Enter “chkdsk c:” to initiate a system check of the local hard
drive. If you desire all errors to be fixed through invocation at the DOS

266

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

prompt, enter “CHKDSK c: /F /R” to find and fix all errors on the local
drive. If your hard drive is labeled with a different letter than “c” just
replace the letter in the above example with the actual hard drive letter on
your computer.

Answer the following questions in your answer/test notebook.

1. What are the things that the scan disk could do in a computer? How
often do you use scan disk your computer?
2. Computers should be protected from errors to prevent component
malfunction. What are the things you should do to avoid such
malfunction?

1. Concept Mapping

In this activity, write in the figures the concepts that relate to the word
“scan”. Add more shapes if you want.

SCAN

2. Scan Flash Drive

Scanning your flash drive will enable you to check if there are some errors in
it.

Here's How:

a. Press the Start button on desktop or double-click the My

267

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Computer icon on your desktop.

b. Select or highlight the flash drive to be scanned for bad sector on
the list .
c. Open the File menu and select Properties option.
d. Then a window dialogue box will appear, then select the Tools tab.
e. Click the Check Now button. The scanning process will then initiate.

DELETING TEMPORARY FILES

Remove Unnecessary Data Files and Programs

Files and programs that are left idle or cluttering in your computer tend
to affect the performance of your system. This happens when the disk space
is heavily occupied and more computer resources are allocated to keep track
of them. During a read request, the disk needs to bypass all unnecessary files
to access the required data. Hence, there is a significant performance dip. In
certain situations, poorly written applications can cause undesirable effects
such as erratic system hangs, blue screens or conflict with other software.

Unused Software Application

These are usually the

software program that you
have installed but used rarely if
not at all. To remove unwanted
programs and applications,
follow these steps:

 Click Start, point to

Settings, select Control
Panel.
 Double click on the
Add/Remove Programs
icon.
Figure 171. Add or Remove Programs
Window
 Select the unused program and click on the Remove button.

268

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Temporary Internet Files

These are files that accumulate in your computer when you surf the web.
Temporary files such as graphics, web pages and cookies are downloaded
into a special temporary folder to facilitate efficient web browsing. To delete
all temporary Internet files, follow these steps:

 Click Start, point to Settings, select Control Panel.

 Double click on Internet Options.
 Under the Temporary Internet Files group box, click the Delete File
button.
 Check the Delete All Offline Content option on the new window and
click Ok.

Figure 172. Internet Properties Window

269

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Windows Temporary Files

Windows temporary files

are generated and stored in your
computer each time you perform
a software installation or
procedure. Very often, poorly
written programs fail to delete
them, hence causing them to be
left idle in your disk. To delete Figure 173. Select Drive Dialogue
these temporary files, follow
these steps:

 Click Start, point to

Programs, point to
Accessories.
 Point to System Tools
and select Disk
Cleanup.
 Select the drive to
clean up
 Click OK.
Figure 174. Disk Cleanup Dialogue Box

Computer Terminologies
Answer the following questions in your notebook. You may research on
the internet for your answers.

 What is the meaning of “cache”? internet cookies?

 How is this concept related to temporary files? What are its effects in the
computer operation? Can these files be also removed or deleted to speed
up computer operation?

270

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Deleting Temporary Files

Directions: Choose your partner. Perform the process of deleting of
temporary internet files. You will be graded using the Performance Score
Card below:

CRITERIA Passed Failed

1. Sequence of steps in deleting is followed.
2. Safety precautions are observed.
3. The students cooperatively performed the activity.
PERFORMANCE RATING

Disk Cleanup

Disk Cleanup is a computer maintenance utility that is included in the

Microsoft Windows operating system and is designed to free up space on the
hard drive. Disk Cleanup helps free up space on your hard drive. Disk
Cleanup searches your drive, and then shows you temporary files, Internet
cache files, and unnecessary program files that you can safely delete. The
cleanup process involves searching and analyzing the hard drive for files that
are no longer needed. Then it proceeds to remove them and thus freeing up
disk space on the hard drive.

Here is the list of all the files that can be deleted from Windows XP:

271

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

1. Downloaded program files

2. Temporary Internet files
3. Offline webpages
4. File for the Recycle Bin
5. Temporary files
6. Web client/publisher
temporary files
7. Compressed old files
8. Catalog files for the content
indexer

Figure 175. Disk Cleanup Dialogue

Box

Disk Cleanup is a feature of Windows that enables a user to delete

system/junk files safely. For example, by using the disk cleanup feature, you
can free up a considerable amount of space on your PC, like getting rid of TIF
(Temporary Internet Files) and other 'useless', and not required, files.

To reduce the number of unnecessary files on your hard disk to free up

disk space and help your computer run faster, use Disk Cleanup. It removes
temporary files, empties the Recycle Bin, and removes a variety of system
files and other items that you no longer need.

To delete files using Disk Cleanup

The following procedure cleans up files associated with your user account.
You can also use Disk Cleanup to clean up all the files on your computer.
1. Open Disk Cleanup by clicking the Start button . In the search box,
type Disk Cleanup, and then, in the list of results, click Disk Cleanup.

272

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

2. In the Drives list, click the hard disk drive that you want to clean up,
and then click OK.
3. In the Disk Cleanup dialog box, on the Disk Cleanup tab, select the
check boxes for the file types that you want to delete, and then
click OK.
4. In the message that appears, click Delete files.

Remove Unnecessary Startup Programs

Some applications are automatically configured to load each time you

boot into Windows. These programs are usually represented by icons that are
loaded in your system tray (the panel located at the bottom right corner of
your screen). Most of which are unnecessary and tend to take up
unnecessary system resources which often slow down your computer.
Microsoft provides a tool called the System Configuration Utility that enables
you to configure the programs to be loaded during startup.

To use this utility, follow these steps:

1. Click Start, point to Run.

2. Type in: msconfig
3. Click on the Startup tab.

Figure 176. System Configuration Window

273

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

4. A list of options will appear indicates that the programs that start up
each time you load Windows.
5. Tick only those that are necessary and click OK.
6. Restart your computer. Click Restart.

If you are a Windows 2000 and Windows NT users, you can still use the
same program msconfig.exe. Since Microsoft did not include the utility in
these two versions of Windows, you have to download it. Once you have
downloaded the file into your computer, follow these steps:

1. Unzip the file.

2. Copy the msconfig.exe file into the C:\winnt\system32 folder.
3. To access the utility, click Start, select Run and type in: msconfig.
Ignore the error messages about not being able to find the following
files:
o config.sys
o autoexec.bat
o win.ini
o system.ini

Activity: Internet Research

In this activity, you will learn how useful the Internet can be for a PC
support technician. Do the following tasks:
1. Research online for the importance of Disk Cleanup and when
to apply it.
2. List down the advantages and effects to the computer system.

274

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Activity
Directions: Delete temporary files in different Operating Systems.
1. Delete Temporary Files in Windows 7 and Windows 8
2. Delete Temporary Files in Windows XP

Manually cleaning out the Tempfolder in Window XP is often a

necessary maintenance step when the Windows XP Disk Cleanup utility fails
to clean out the Tempfolder automatically.

Removing temporary files is a quick and easy task that can help save
disk space and keep your PC clean of file clutter. Just follow the step-by-step
directions below to manually clean out the Tempfolder:

Time Required: Manually cleaning out the Temp folder in Windows XP

usually takes less than 5 minutes.
Here's how:

1. Click on Start and then Run.

2. In the text box in the Run window, type %Temp% and click OK. A
folder full of files and other folders will appear.

All of the folders and files you see in this Temp folder are no longer
being used by Windows XP and can safely be deleted.

3. To remove individual folders or files, hold down your Ctrl key while left-
clicking on each item you want to delete. Release the Ctrl key when
you are finished.

To delete these items, press Delete key or choose File and then
Delete from the menu.

4. Confirm that you want to delete the files by clicking Yes on the Confirm
Multiple File Delete window that opens.
5. If you like to remove everything inside the Temp folder, choose Edit
and then Select All from the menu.

275

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Note: If you are prompted that there are hidden files in this folder, just
click on OK to bypass the message. A few hidden files hanging out in
the Temp folder probably are not important enough to worry about.

6. Now that all of the files and folders are selected, press your Delete key
or choose File and then Delete from the menu.
7. Confirm that you want to delete the files by clicking Yes on the Confirm
Multiple File Delete window that opens.
8. After all of the files have been deleted you can close the window and
empty your Recycle Bin, permanently removing the files from your PC.

Note:

1. You may receive an Error Deleting File or Folder message while the
files are being deleted. This just means that one of the files is in use by
a program. Click OK, close all open programs, and repeat the steps
above. If you still receive the message, try restarting your PC and
repeating the process.

276

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Lesson 3. Maintain Network Systems

Maintaining computer system and network increases efficiency and

saves you from the hassle and expense associated with major repairs.
However, it is essential to understand how to schedule maintenance plans
and implement it accordingly. By learning when maintenance is practical and
developing a scheduling strategy, you can set up maintenance strategies that
are beneficial to your computer system and network.

The following are the procedures on how to maintain computer system

and networks:

Create an Equipment Maintenance Schedule

In order to perform the maintenance of your computer efficiently, a

maintenance schedule is made to guide the personnel in the proper
maintenance procedure. This will help them remember the maintenance task
that needs to be done in order to improve the functionality of the computer
system and networks.

Create a Maintenance Checklist

To determine if the maintenance program is implemented according to

what is planned, an assessment must be done. The result of the assessment
will then be recorded and reported to the proper authorities for immediate
action.

The assessment is through regular inspections which assure that the

maintenance activities are done on the date and time they were was planned
and that the performance levels adhered to the defined standard.

Below is a sample Maintenance Inspection Checklist. This checklist

will confirm if the maintenance activities have been performed in order to
prolong the life of this particular equipment. The inspection items are stated in
question form as these serve as the criteria or standards of maintenance.

277

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Perform the computer maintenance task regularly.

Just knowing all the basics of computer maintenance task schedule

clearly will not be enough. Find time to apply all of the maintenance
procedure regularly and frequently. Make computer maintenance activities a
regular practice, so that you always have a fine tuned computer with good
performance.

Perform Network Maintenance Procedures

Networks are used to transmit information and electricity through cables.

When installing these networks, at most care must be applied to protect the
network installers from injury. Procedures must also be followed to ensure
that those around the network cables do not become the victims of electrical
fires or other hazards.

1. Duct Systems

Networks are sometimes installed in duct systems. There is a

concern that the network cables might become damaged during
construction, so the ducts must be built away from planned
future road construction and utilities, according to the
International Telecommunication Union. The manholes placed

278

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

in the roads must be kept away from intersections so that the

network installation and repair workers are not at risk of being
hit by a vehicle.

Optical Lasers

Networks that use optical lasers uses invisible radiation that is

emitted by these lasers. Before installing the laser, the laser
operation manual and safety guide must be read, according to
Net Ap. No one should stare inside the optical ports from where
the lasers emit their light or else blindness could result. When
working with the laser, safety goggles must always be worn.

Falling

Many networks are run along utility poles, which are wooden
poles that have network cables raised high above the ground.
When installing these cables, falling can be disastrous given the
height of the utility poles. Therefore, network installers should
wear safety harnesses to ensure that they do not fall.

De-Energize

Some networks have cables that are electrically charged. These

cables must be de-energized and tests should be used to
ensure that the cables do not have any remaining electricity in
them. The tools that are used for repairing the cables are
insulated so that electricity does not travel through them and
into the hands of the line repairer.

Cable Safety Standards

Network cables must have certain characteristics to be legally

used for networks. The cables must not produce flames that can
ignite anything. They must not have halogen. They must not
produce acidic fumes. They must be resistant to ionizing
radiation. Cables must be coded so that those working with the
cables can identify what they are.

Cable Inspection

Networks must only be installed by licensed professionals.

Building inspectors must check the network cables to ensure
that they are installed properly and that they will not create a fire

279

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

hazard. These building inspections are especially important

when the property containing the network cables is sold.

General Safety

Safe working conditions help prevent injury to people and damage to

computer equipment. A safe work space is clean, organized, and properly
lighted. Everyone must understand and follow safety procedures.

Follow the basic safety guidelines to prevent cuts, burns, electrical

shock, and damage to eyesight. As a best practice, make sure that a fire
extinguisher and first-aid kit are available in case of fire or injury. Poorly
placed or unsecured cables can cause tripping hazards in a network
installation. Cables should be installed in conduit or cable trays to prevent
hazards.

These are some of the basic safety precautions to observe when

working on a computer:

 Remove your watch and jewelry and secure loose clothing.

 Turn off the power and unplug equipment before performing service.
 Cover sharp edges inside the computer case with tape.
 Never open a power supply or a CRT monitor.
 Do not touch areas in printers that are hot or that use high voltage.
 Know where the fire extinguisher is located and how to use it.
 Keep food and drinks out of your work space.
 Keep your work space clean and free of clutter.
 Bend your knees when lifting heavy objects to avoid injuring your back.

Electrical Safety

Follow electrical safety guidelines to prevent electrical fires, injuries,

and fatalities in the home and the workplace. Power supplies and CRT
monitors contain high voltage.

CAUTION

Only experienced technicians should attempt to repair power supplies

and CRT monitors.

280

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Some printer parts become hot during use, and other parts might
contain high voltage. Check the printer manual for the location of high-voltage
components. Some components retain a high voltage even after the printer is
turned off. Make sure that the printer has had time to cool before making the
repair.

Electrical devices have certain power requirements. For example, AC

adapters are manufactured for specific laptops. Exchanging power cords with
a different type of laptop or device may cause damage to both the AC adapter
and the laptop.

Follow fire safety guidelines to protect lives, structures, and equipment.

To avoid an electrical shock and to prevent damage to the computer, turn off
and unplug the computer before beginning a repair.

The following are general information on electrical safety:

 Electrical equipment that is plugged into a power source should

NEVER be handled if your hands or feet are wet.
 Do not allow cables and plugs to get wet. Thus, keep liquids away
from electrical equipment.
 Unplug equipment by pulling on the plug, not the cord.
 Damaged electrical equipment that constitute an electrical hazard are
not to be used until properly repaired or replaced.
 Never connect electrical cords in series.
 All electrical circuit disconnects or panels must not be blocked.
 Ground pins on the plugs and the devices plugged into the
receptacles must be intact.
 Do not store flammable liquids near electrical equipment.

Fire Safety

Fire can spread rapidly and can be very costly. Proper use of a fire
extinguisher can prevent a small fire from getting out of control. When
working with computer components, be aware of the possibility of an
accidental fire and know how to react. Be alert to notice odors being emitted
from computers and electronic devices. When electronic components
overheat or short out, they emit a burning odor. If there is a fire, follow these
safety procedures:

281

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

 Never fight a fire that is out of control or not contained.

 Always have a planned fire escape route before beginning any work.
 Get out of the building quickly.
 Contact emergency services for help.
 Locate and read the instructions on the fire extinguishers in your
workplace before you use them.

Be familiar with the types of fire extinguishers used in your country or

region. Each type of fire extinguisher has specific chemicals to fight different
types of fire.

Types of Fires

Not all fires are the same. Different fuels create different fires and require
different types of fire extinguishing agents.

Class A

Class A fires are fires in ordinary combustibles such as wood,

paper, cloth, trash, and plastics.

Class B

Class B fires are fires in flammable liquids such as gasoline,

petroleum oil and paint. Class B fires also include flammable
gases such as propane and butane. Class B fires do not include fires
involving cooking oils and grease.
Class C

Class C fires are fires involving energized electical equipment such

as motors, transformers, and appliances. Remove the power and
the Class C fire becomes one of the other classes of fire.

Class D

Class D fires are fires in combustible metals such as potassium,

sodium, aluminum, and magnesium.

282

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Class K

Class K fires are fires in cooking oils and greases such as animals
fats andvegetable fats.

Some types of fire extinguishing agents can be used on more than one
class of fire. Others have warnings where it would be dangerous for the
operator to use a particular fire extinguishing agent.

Different types of fire extinguishers are designed to fight different

classes of fire. The three most common types of fire extinguishers are: Water
(APW), Carbon Dioxide (CO2), Dry Chemical (ABC,BC,DC).

Water and Foam fire extinguishers snuff the fire by taking away the
heat element of the fire triangle. Foam agents also separate the oxygen
element from the other elements.

Water extinguishers are for Class A fires only - they should not be
used on Class B or C fires. The discharge stream could spread the flammable
liquid in a Class B fire or could create a shock hazard on a Class C fire.

Carbon Dioxide fire extinguishers snuff fire by taking away the oxygen
element of the fire triangle and also be removing the heat with a very cold
discharge.

Carbon dioxide can be used on Class B & C fires. They are usually
ineffective on Class A fires.

Dry Chemical fire extinguishers extinguish the fire primarily by

interrupting the chemical reaction of the fire triangle. Today's most widely
used type of fire extinguisher is the multipurpose dry chemical that is effective
on Class A, B, and C fires. This agent also works by creating a barrier
between the oxygen element and the fuel element on Class A fires.

It is important to know how to use a fire extinguisher. Use the memory

aid P-A-S-S to remember the basic rules of fire extinguisher operation:

 P: Pull the pin.

 A: Aim at the base of the fire, not at the flames.
 S: Squeeze the lever.
 S: Sweep the nozzle from side to side.

283

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Accomplish the maintenance inspection checklist below. Put a check mark on

the column which states an action taken. Do this on your notebook.

MAINTENANCE INSPECTION CHECKLIST

Equipment Type PERSONAL COMPUTER
Property Code PC001
Location Practical Work Area
YES NO INSPECTION ITEMS
1. Are the stability of the male plug and other power
connections checked regularly?
2. Is the machine regularly cleaned?
3. Is the monitor checked and cleaned regularly?
4. Are the peripherals cleaned and checked
regularly?
5. Is the hard disk checked and cleaned regularly?
6. Are the applications regularly updated?
7. Are backing-up of files done regularly?

Video Tutorial
Directions:
Watch the video on http://www.youtube.com/watch?v=cMCCLKDHXqI and
make an outline of steps on maintenance procedure or the action taken
shown in the video.

Weekly Maintenance Checklist

Directions: Create a weekly maintenance checklist for the computer
laboratory. Include all the computer and network hardware. You will be given
40 minutes to complete the task. You can use any applications in creating the
checklist. Present your output to the class.

284

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Excellent Good Poor

(3) (2) (1)

Hardware/Peripherals All
hardware/peripherals
were enumerated
Format Layout of the checklist
is good.
Details Important details
were included such as
dates, checker’s
name, area/room,
remarks, conditions,
etc.
Handwriting Legible. Good spacing
and alignment.
Total Points

Burn-In Testing

Burn-in testing enables you to run test scripts and to create new
scripts. The Diagnostics main menu provides two burn-in selections,
Immediate Burn-In Testing and Deferred Burn-In Testing.

 Immediate Burn-In enables you to run an existing script and to select

configuration options. Deferred Burn-In enables you to create a new
script.

Standard Scripts

Sun provides three ready-made scripts designed to test the general

health of the devices on your system. These scripts include:

 quick.tst

285

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

This script performs a series of tests that require the user to interact
with the test software. When they require a user interaction, they stop and do
not time out. These tests are faster than the full.tst but they are less thorough.
For example, they do not run all the tests associated with a DIMM.

 noinput.tst

This script performs a non-detailed test of most hardware components,

excluding those components that require user input (keyboard, mouse,
sound, and video). This test does not require user input. It is normally the first
test performed for hardware-related problems.

 full.tst

This script performs a detailed and comprehensive test on all hardware

components, including those that require user input. It includes external port
tests and requires loopback connectors on COM ports, parallel ports, and
USB ports. You must interact with the test utility to progress through these
interactive tests.

Performing Immediate Burn-In Testing

Use Immediate Burn-In Testing to run test scripts.

To Perform Immediate Burn-In Testing

1. From the Diagnostics main menu, select Immediate Burn-In Testing. The
screen displays a list of settings shown in TABLE 6-3 and a Burn-In menu.
2. From the menu, select Load Burn-In Script.A text box appears.
3. Type the name of the script you want to run, for example quick.tst,
noinput.tst, or full.tst.
4. To change any of the options, select Change Options at the bottom of the
screen.
This opens the Burn-In Options menu, which enables you to modify the
options listed in TABLE 6-3 for the currently loaded test script.
5. Select Perform Burn-In Tests.
The diagnostics software executes the test script as configured.
286

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

TABLE 6-3 Continuous Burn-In Testing Options

Default - Default using quick.tst, All Possible

Option
General noinput.tst,orfull.tst Script Choices
Individual Passes,
Pass Overall
Overall Passes Overall Passes, or
Control Time
Overall Time
Enter any number to
Duration 01:00 1 choose the time
duration of the test
quick.tst,
Script File N/A quick.tst, noinput.tst, or full.tst
noiniput.tst, or full.tst
Report
None None User defined
File
Journal D:\noinput.jrl,D:\quick.jrl, or
None User defined
File D:\full.jrl
Failed Tests, All
Journal Failed All Tests, Absent Devices, Tests, Absent
Options Tests and Test Summary Devices, and Test
Summary
Pause on
N N Y or N
Fail
Screen Control Control Panel or
Control Panel
Display Panel Running Tests
POST
N N Y or N
Card
Beep
N N Y or N
Codes
Maximum
Disabled Disabled 1-9999
Fails

Show Results Summary

Selecting show results summary on the diagnostics main menu

displays the tests that have been run and lists the results, which can be Pass,
Fail, or Not Applicable.

287

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

 Processor

This section shows the following tests conducted against the

processor: Core Processor Tests, AMD 64-Bit Core Tests, Math Co-
Processor Tests - Pentium Class FDIV and Pentium Class FIST, MMX
Operation, 3DNow! Operation, SSE Instruction Set, SSE2 Instruction Set, and
MP Symmetry.

 Motherboard

This section shows the following tests conducted against the

motherboard: DMA Controller Tests, System Timer Tests, Interrupt Test,
Keyboard Controller Tests, PCI Bus Tests, and CMOS RAM/Clock Tests.

 Memory, Cache Memory, and Video Memory

This section shows the following tests conducted against the various
types of memory: Inversion Test Tree, Progressive Inversion Test, Chaotic
Addressing Test, and Block Rotation Test.

 Input Device

This section shows the following tests conducted against the input
device: Verify Device, Keyboard Repeat, and Keyboard LEDs.

 Mouse

This section shows the following tests conducted against the mouse:
Buttons, Ballistics, Text Mode Positioning, Text Mode Area Redefine,
Graphics Mode Positions, Graphics Area Redefine, and Graphics Cursor
Redefine.

 Video

This section shows the following tests conducted against the video:
Color Purity Test, True Color Test, Alignment Test, LCD Test, and Test Cord
Test.

 Multimedia

This section shows the following tests conducted against the

multimedia components: Internal Speaker Test, FM Synthesizer Test, PCM
Sample Test, CD/DVD Drive Read Test, CD/DVD Transfer (KB/Sec),

288

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

CD/DVD Transfer Rating, CD/DVD Drive Seek Test, CD/DVD Seek Time
(ms), CD/DVD Test Disk Read, and CD/DVD Tray Test.

 ATAPI Devices

This section shows the following tests conducted against ATAPI

devices: Linear Read Test, Non-Destructive Write, and Random Read/Write
Test.

 Hard Disk

This section shows the following tests conducted against the hard disk:
Read Test, Read Verify Test, Non-Destructive Write Test, Destructive Write
Test, Mechanics Stress Test, and Internal Cache Test.

 USB

This section shows the following tests conducted against the USB:
Controller Tests and Functional Tests.

 Hardware ID

The compare test is used to determine the machine ID for the system.
This test is not available for the Sun Blade X6275 server module.

Print Results Report

The Print Results Report option enables you to print results of the
diagnosis of your server if it is connected to a printer through a parallel port.

Exit

The Exit option exits the PC-Check software and reboots the server module.

Viewing the PC-Check Results

You can use the text file editor to view the results when you run PC-Check
manually. To do this, you need to know the name of the file or files produced
by the tests.

PC-Check Filenames

When you run a test, the header of the screen where you invoke the
test shows you the name of the output file. For example, when you run the

289

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

continuous burn-in test, the name of the output file is PCCHECK.BRN, as you
can see in the following figure.

FIGURE 177. PC-Check Continuous Burn-in Testing

Page
Other files are named PCCHECK.xxx, for example, PCCHECK.JNL or
PCCHECK.HII. The .HII file is especially important because it shows the
entire host configuration at the time of failure.

Viewing PC-Check Files with the Text File Editor

When you know the name of the output file, you can use the text file
editor to view the file.

1. Select the System Information Menu option on the PC-Check

Main Menu and press Enter.

The System Information Menu appears, as shown here:

FIGURE 178. PC-Check System Information Menu

290

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

2. Select the Text File Editor and press Enter. You are prompted for a file
name.

3. Type in the file name (for example, PCCHECK.JNL) and press Enter.

The editor opens with the file displayed, as shown here:

FIGURE 179. PC-Check Journal File in Text Editor

291

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Lesson 4. Inspect Computer Systems and Networks

OHS Procedures in Maintaining Network Systems

In general, testing is finding out how well something works. In terms of

human beings, testing tells what level of knowledge or skill has been
acquired. In computer hardware and software development, testing is used at
key checkpoints in the overall process to determine whether objectives are
being met. For example, in software development, product objectives are
sometimes tested by product user representatives. When the design is
complete, coding follows and the finished code is then tested at the unit or
module level by each programmer; at the component level by the group of
programmers involved; and at the system level when all components are
combined together. At early or late stages, a product or service may also be
tested for usability.
Safety Precautions
Occupational Health and Safety (OHS) Policy –An Information and
Communication Technology (ICT) student should know how to behave when
working in the computer laboratory, and how to implement a safe way of
accomplishing every task. Safety practices should be learned early and
always adhered to in working with any electrical and electronic device,
including personal computers and its peripherals. This is for your protection
as well as to the people working with you, and for the devices that you are
using. The basis for this process begins with Occupational Health and Safety
Policies.

Occupational Safety and Health (OSH) is a planned system of working to

prevent illness and injury where you work by recognizing and identifying
hazards and risks. Health and safety procedure is the responsibility of all
persons in the computer and technology industries. You must identify the
hazards where you are working and decide how dangerous they are.
Eliminate the hazard or modify the risk that it presents.

292

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Occupational Health and Safety standards

Each student has a responsibility to their colleagues and their
organization to report and act upon any potential workplace hazard. Students
need to be aware of the type of hazards that are possibly present in their work
environment.

Procedure
1. Identify the hazard.
2. Clear the area close to the hazard.
3. Partition the hazard off or clearly identify the area to protect other
people from harm.
4. If the hazard can easily and safely cleared, then do so.
If not…
5. Report the hazard to the appropriate person (such as teacher in
charge, principal etc.) to obtain assistance.
6. Following clearing of the hazard fill out the correct documentation to
assist in identifying improved practice to reduce further incidence of
hazards.

Maintenance of the Computer Systems and Networks

Diagnostic Software for Network
Network Diagnostic Tool is an efficient and reliable tool to help you
determine and identify the possible network issues that prevent you from
using your computer to the fullest. With Network Diagnostic Tool, you can
quickly identify the problems you may be having, which sometimes occur with
home computers that are connected to the web via cable or DSL modems.
The Network Diagnostic Tool is a utility that analyzes your system and
performs a wide range of tests to determine the cause of your connectivity
issues by investigating all your network-related services and programs,
looking into your IP configuration and default gateway, but it will also test out
the DNS and Firewall.
Moreover, Network Diagnostic Tool can also run an Internet
connection validation test, in the interest of discovering the underlying

293

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

problems and gathering all the information you may need with a minimal level
of effort for you.
The program will assist you during the troubleshooting operation,
enabling you to save significant amounts of time by sparing you from finding
the causes of your network problems by yourself.
There are free available network diagnostic tools that can be download
online, such as Wireshark and TCPdump. It will help you monitor your
network performance and highlight discrepancies that might point to
underlying malicious activity.

Testing Demonstration
To check the vulnerability or stability of your network connection, go to the
internet and download a free network diagnostic tool.
 Go to any search engine and type – network diagnostic tool.
 After downloading the application, run the setup file of the program and
install it into your computer.
 If the program was already installed, run the application. Take note of
the diagnosis. Do some action if there are problems or errors
encountered.

Network Diagnostics for Windows XP tool

Directions: Visit the link on http://support.microsoft.com/kb/914440. Follow
the instructions given and apply them to your computer. You are to be rated
according to the rubric below.

294

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Rubric for your Performance Test

CRITERIA Excellent Good Fair Poor
4 3 2 1

Adherence to the
sequence of setup
-Followed carefully the
given instructions.
Workmanship
-Had organized
materials and tools
while accomplishing
the task and has time
management.
Quality of work
-Presented a neat final
output.

Schedule and Techniques in Maintaining Systems

Regular maintenance is essential to keep a network running well. You
should also be prepared to upgrade equipment and software periodically to
take advantage of improving technology.

System Restore
System Information maintains a history of device drivers that are
installed on your computer. If you are unsure of a computer's recent history,
you can use System Information to better understand what has happened in
the past. If a device does not work correctly, and its history indicates a recent
upgrade to a new driver, replace that driver with the original driver, and test to
see if doing so resolves the issue.
System Information also provides access to tools you can use for
troubleshooting your computer.

295

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

If you install an update from the Windows Update Web site, and it fails
to meet your expectations, restore the original files by running the Update
Wizard Uninstall from the Tools menu in the System Information tool. If your
computer worked fine yesterday, but is not working properly today, try
restoring yesterday's configuration files by running the System Restore utility
from the Tools menu in the System Information tool.
To start Microsoft System Information, use either of the following methods:

 Click Start, point to Programs, point to Accessories, point to System

Tools, and then click System Information.
 Click Start, click Run, type msinfo32.exe in the Open box, and then
click OK.
To start System Restore

 Click Start, point to Programs, point to Accessories, point to System

Tools, and then click System Restore; or
 Click Start, click Run, type System Restore in the Open box, and then
press Enter key. Then, it will prompt you to the dialogue box shown
below:

Figure 180. System Restore Window

 Click Next button, then it will prompt you to restore your computer to
the state it was working properly. Tick on Show More Restore Points
then check the box below to display other possible options you can
choose.

296

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Figure 181. System Restore Window with More Restore

 Choose a Restore Point given on the list and select Next.

 Finally, choose Finish button to proceed with the process. Wait for the
computer to automatically restart as it undergoes system restore.

Figure 182. Confirm Restore Point Window

297

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

After doing the performed task, you will be assessed using the
following criteria:
CRITERIA Excellent Good Poor (1)
(3) (2)
1. Sequence of steps is followed.
2. Safety precaution is observed.
4. Speed (Worked in a fast manner).

PERFORMANCE RATING

Network Monitoring
Network monitoring refers to the practice of overseeing the operation
of a computer network using specialized management software tools.
Network monitoring systems are used to ensure availability and overall
performance of computers (hosts) and network services.

Network Monitoring Software Tools

The ping program is one example of a basic network monitoring
program. Ping is a network administration utility or tool used to test
connectivity on an Internet Protocol (IP) network. It also measures the latency
or delay between two computers. Ping is a software tool available on most
computers that sends Internet Protocol (IP) test messages between two
hosts. Anyone on the network can run these basic ping tests to verify the
connection between two computers is working and also measure the current
connection performance.

298

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Testing Network Connection with Ping Symptoms:

 wants to test the network using Ping
 wants to test the latency of the network

1. Open the Command Prompt or Terminal. Every operating system has a

command line interface that will allow you to run the Ping command.
The Ping command operates virtually and identically on all systems.
If using Windows, open the Command Prompt. Click the Start
button and enter "cmd" into the Search field. Windows 8 users can
type "cmd" while on the Start screen. Press Enter to launch the
Command Prompt.

2. Type ping followed by an IP address or a website address then press

Enter key to execute the command. Here is a brief explanation of
commonly used ping commands:
o ping 127.0.0.1 (This is a "loopback ping" - your computer trying to talk
to itself. If the loopback step fails, it might be because the TCP drivers
are corrupted, the network adapter might not be working, or another
service is interfering with IP.)
o ping <IP address> (This will ping the IP address of a device like a local
computer, remote server or any client that receives an IP address to
verify that it is reachable and that you can communicate with it
properly.) Example: ping 192.168.1.1 (this is the default IP address of
NETGEAR routers)
o ping<website address> (This command will test for the Internet
connectivity and DNS functionality.) Example: ping www.netgear.com,
ping google.com

299

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Here is a screenshot of a successful ping test:

Figure 183. Command Prompt with Ping command

The first arrow shows the computer we are trying to reach is

responding. (The DNS address "www.netgear.com" is displayed into the
Figure Command Prompt Window
equivalent IP address, 10.1.1.86.) This also shows that the computer is
online and it has Internet access.
The second arrow shows that all of the sent packets are received
showing that there is 0% loss. This means that the connection is available
and stable.
The third arrow shows the average time it took to answer. "Average =
0ms" is the best possible result. This kind of result is usually received if the
device you tried to reach is within the same network.

Common Ping Test Problems

1. Request Timed Out. This message indicates that no reply messages
were received within the default time of 1 second. This can be due to
many different causes; the most common causes arenetwork
congestion, failure of the ARP request, packet filtering, routing error, or
a silent discard. Most often, it means that a route back to the sending
host has failed. This might be because the destination host does not
know the route back to the sending host, or one of the intermediary
routers does not know the route back, or even that the destination
host's default gateway does not know the route back. Check the routing
table of the destination host to see whether it has a route to the
sending host before checking tables at the routers.

300

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

2. Unknown Host
This error message indicates that the requested host name cannot be
resolved to its IP address; check that the name is entered correctly and
that the DNS servers can resolve it.

3. Destination Host Unreachable

This message indicates one of two problems: either the local system
has no route to the desired destination, or a remote router reports that
it has no route to the destination. The two problems can be
distinguished by the form of the message. If the message is simply
"Destination Host Unreachable," then there is no route from the local
system, and the packets to be sent were never put on the wire. Use the
Route utility to check the local routing table.
If the message is "Reply From < IP address >: Destination Host
Unreachable," then the routing problem occurred at a remote router,
whose address is indicated by the "< IP address >" field. Use the
appropriate utility or facility to check the IP routing table of the router
assigned the IP address of < IP address >.
If you pinged using an IP address, retry it with a host name to
ensure that the IP address you tried is correct.

Practicing TCP/IP Networking Skills

While connected to the Internet or another TCP/IP network, answer
these questions:
1. What is your current IP address?
2. Release and renew your IP address. What is your new IP address?
3. Are you using dynamic or static IP addressing? How do you know?
4. What is your adapter address for this connection?
5. What is your default gateway IP address?

301

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Network Checking
Direction: Check the network status by using the ping command. Make a
status report on the results.
1. Ping a website.
2. Ping the router.
3. Ping a terminal/computer.

Rubric for your performance Test

Criteria Percentage Grade
Accuracy 50 %
Adherence to the procedures 20%
Workmanship(applied safety 20%
precautions)
Speed 10%
Performance Rating

302

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Computer Communications
Although computers communicate on many different levels and there is
a great deal of variation between the different types of computer systems
involved, the basic communication process is relatively uniform and
standardized. Essentially, computers communicate with one another over
networks that are connected via wire or wireless communication methods.
There are many different types of networks, and there are many different
types of network-connection methods as well.
As mentioned before, there are many types of networks. From
smallest to biggest, the most common network types are personal area
network, local area network, campus area network, metropolitan area
network, wide area network, global area network and internetwork. The basic
difference between these network types is their size (how many remote
computer systems are connected to them) and their method of connection.
Methods of Connection Commonly Used
There are many different types of connection media that are used in
contemporary society to connect computer networks to one another. In terms
of wired connections, there is coaxial cable, fiber-optic cable, USB cable and
traditional telephone lines. These are the most common network
connections. Wireless technologies differ hugely from one another, but the
most popular kinds are Bluetooth and WiFi.

How network works - Computers in network

General Network Techniques - When computers communicate on a

network, they send out data packets without knowing if anyone is listening.
Computers in a network all have a connection to the network and that is
called to be connected to a network bus. What one computer sends out will
reach all the other computers on the local network.

Figure 184. General Network

303

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

For the different computers to be able to distinguish between each

other, every computer has a unique ID called MAC-address (Media Access
Control Address). This address is not only unique on your network but unique
for all devices that can be hooked up to a network. The MAC-address is tied
to the hardware and has nothing to do with IP-addresses. Since all computers
on the network receive everything that is sent out from all other computers,
the MAC-address is primarily used by computers to filter out incoming
network traffic that is addressed to the individual computer.

When a computer communicates with another computer on the

network, it sends out both the other computer’s MAC-address and the MAC-
address of its own. In that way the receiving computer will not only recognize
that this packet is for it but also who sent this data packet so a return
response can be sent to the sender.

In an Ethernet network as described here, all computers hear all

network traffic since they are connected to the same bus. This network
structure is called multi-drop.
One problem with this network structure is that when you have, let say
ten (10) computers on a network and they communicate frequently and due to
that they send out data packets randomly, collisions occur when two or more
computers sends data at the same time. When that happens, data gets
corrupted and has to be resent. On a network that is heavy loaded, even the
resent packets collide with other packets and have to be resent. In reality this
soon becomes a bandwidth problem. If several computers communicate with
each other at high speed they may not be able to utilize more than 25% of the
total network bandwidth since the rest of the bandwidth is used for resending
previously corrupted packets.
The way to minimize this problem is to use network switches.

304

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Set up a DSL or cable connection

To set up a Digital Subscriber Line (DSL) or cable connection, you first

need an account with an Internet Service Provider (ISP). For DSL, the ISP is
usually a phone company; for cable, it is usually a cable TV provider.

You will also need a modem, a router, or a device that combines the
two. When you have your modem and router or your combination device,
follow the corresponding steps below.

FIGURE 185. Combined Modem and Router

How to plug in a combined modem and router properly

1. Plug the device into an electrical outlet.

2. Plug one end of a phone cord or cable into the wide area network
(WAN) port of the device, and then plug the other end into the wall
jack. The WAN port should be labeled "WAN." (DSL users: Do not use
a DSL filter on the phone line.)
3. Plug one end of an Ethernet cable into the local area network (LAN)
port on the device, and then plug the other end into the networking port
of the computer that you want to connect to the Internet. The LAN port
should be labeled "LAN." (If you are connecting wirelessly, skip this
step.)
4. Start (or restart) the computer.
5. Open the Connect to the Internet wizard by clicking the Start button,
clicking Control Panel, click Network and Internet, click Network
and Sharing Center, click Set up a connection or network, and then
click Connect to the Internet.

305

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

FIGURE 186. Modem and Router properly

plugged-in
How to plug in modem and router properly

1. Plug the modem into an electrical outlet.

2. Plug one end of a phone cord or cable into the modem, and plug the
other end into the wall jack. (DSL users: Do not use a DSL filter on the
phone line.)
3. Plug one end of an Ethernet cable into the modem, and plug the other
end into the wide area network (WAN) port on the router.
4. Plug the router into an electrical outlet.
5. Plug one end of an Ethernet cable into the local area network (LAN)
port on the router, and plug the other end into the networking port on
the computer that you want to connect to the Internet. (If you are
connecting wirelessly, skip this step.)
6. Start (or restart) the computer.
7. Open the Connect to the Internet wizard by clicking the Start button ,
clicking Control Panel, clicking Network and Internet, clicking Network
and Sharing Center, clicking Set up a connection or network, and then
clicking Connect to the Internet.

Video Tutorial
Directions:
Watch the video on http://www.youtube.com/watch?v=KBHyDd2cJBs and
make an outline of steps or procedure of the action taken presented or shown
in the video.

306

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Network Connection Demo

You are required to make a network connection using the devices
provided. You will be rated according to the criteria given below.
Equipment, Tools and Materials Required:
- UTP cables
- 1 router
- 1 hub
- 2 PC unit
- DSL connection

Given the following materials, set-up a network connection on one computer.

CRITERIA 1 2 3 4 5

 Safety Precautions are observed.

 All the UTP cables are properly connected
to the computer and hub.
 Computer is properly connected and seen
in the network.
 Proper boot-up and shutdown of the
computer is observed.

Total:

307

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Identify Safety Procedures and Potential Hazards for Users and

Technicians
Safety in the lab and in the work place is an important issue when
working on computers and other electrical devices. General safety guidelines
and fire safety guidelines protect the technician and the equipment.

General Safety Guidelines

Follow the basic safety guidelines to prevent cuts, burns, electrical shock,
and damage to eyesight. As a best practice, make sure that a fire extinguisher
and first aid kit are available in case of fire or injury.

Installing network cables, whether copper or fiber-optic, can be

dangerous. Often, cables must be pulled through ceilings and walls where there
are unexpected obstacles or toxic materials. You should wear clothing that
protects you from these materials. For example, wear long pants, a long-
sleeved shirt, sturdy shoes that cover your feet, and gloves. Most importantly,
wear safety glasses. If possible, ask building management, or someone
responsible for the building, if there are any dangerous materials or obstacles
that you need to be aware of before entering the ceiling area.

Cable, Cable Cutters, and Cable-Cutting Safety Hazards

All levels of technicians should know the hazards before working with
network cables and equipment. This section describes the safety hazards of
working with copper cables, which, like fiber-optic cables, can be dangerous to
handle.

Caution
When handling cable, always wear eye protection. Never touch the ends
of any type of cable to bare skin.
When you cut copper cable, the small copper strands can puncture your
skin or cut you. The small pieces that come off after cables are cut often fly into
the air. Remember to always wear safety glasses when cutting any type of
308

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

cable.
The cutting and crimping tools used to repair set of terminate copper
cables can be dangerous if not used properly. Read the instructions that comes
with the tool. Practice using the tool on scrap cable, and ask an experienced
installer for help if you need it.

Remember that copper cable conducts electricity. A faulty equipment,

static electricity, or lightning can energize even a disconnected cable. If in
doubt, test the cable you are working on with a simple voltage detector before
touching it.

Preparing Technical Reports

The main purpose of a technical report is to deliver information. Technical
reports are intended primarily for the long-term archival of results and
descriptions and for monitoring the conditions of laboratory facilities such as the
computers, network status and other hardware facilities.
A good report needs careful planning. As part of the planning stage, you
should answer the following questions.

 What is the report about? What are you trying to say? You should
arrange things so that the key facts and conclusions are very accessible.
Not everyone will read the whole report, so ensure that your message is
concise even if a person only skims the document.
 Who are you writing for? It is simply impossible to write a technical
document that will be equally easy for everybody to read: the level of
explanation you need for an expert audience is totally different from the
explanation needed for readers who are unfamiliar with the subject. It is
absolutely essential that you identify the potential readers — the
professional group, not the individuals — before you start your work.
 How long can the report be? It is difficult to predict in advance exactly
how long a report will be. Technically speaking, writing reports for
hardware and other facilities should be specific and itemized.

309

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

A hardware report can help you to:

 identify the hardware components inside your computer – CPU, memory,
motherboard etc;
 understand conflicting hardware inside your computer; and
 help the computer repair person to understand your computer with a
written, detailed hardware report (therefore he can find the missing
drivers faster, for example).

Fill-up the following reports.

Sample of simple Technical Reports.

310

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Sample Detailed Technical Report

311

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

Computer Item Enumeration

Directions: Enumerate the hardware items that can be seen inside the
computer laboratory, applications installed in a computer, network devices,
computer tools and others.

Creating Computer Hardware – Software – Tools Report

Directions: Create Computer Hardware – Software – Tools Report on the
available devices in your computer laboratory. Reports will be based on the
items inspected in the laboratory. Create your own format. You are to be
rated according to the score card below.
PERFORMANCE SCORE CARD

CRITERIA Percentage Score

1. Originality of format and layout 40%

2. Content of the report 40%

3. Proper use of equipment and materials is 10%

observed.
4. Observance of Safety Precautions 10%

PERFORMANCE RATING

312

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

I. Identify what maintenance procedure is described in each situation.

__________1. This will allow proper circulation of air inside the computer unit.

_________ 2. This will help lessen the attacks of viruses and will increase the
life span of your computer.

__________3. This means taking care of your computer.

__________4. Protecting your files means creating backups, storing your file
backups on your hard drive or any removable storage device regularly.

__________5. By deleting the temporary files on your computer, it will

enhance its speed and will create more disk space for your files.

__________6. Regularly update your anti-virus for your computer protection

against viruses.

__________7. To avoid damage to the computer unit always turn off and
unplugged it when trying to transfer the computer to another location.

__________8. Installing passwords makes your files more secure.

__________9. Maintenance of equipment or systems before fault occurs

__________10. This will allow proper circulation of air inside the computer
unit.

II. Choose the letter of the correct answer:

1) It refers to a list of the key components that make up the computer.

a. Specs c. Brand
b. Manufactures d. Checklist

2) The main working memory in a computer is called ___________.

a. ROM c. Processor
b. RAM d. memory chips

313

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

3) It stores the applications and programs that run on the PC, as well as
any work created by users.
a. CD/DVD c. Hard drive
b. RAM d. Zip drive

4) These cards are installed inside a PC and are responsible for

determining the quality of the visuals output by the computer.
a. Audio Card c. LAN Card
b. Graphics Card d. Adapter card

5) These are the two leading companies when it comes to manufacturing

processors.
a. HP and Dell c. AMD and Intel
b. Epson and Canon d. Acer and Asus

6) This card allows a computer to be connected to a network. A

10/100/1000 Mbps (Megabits per second) card is the standard card
specifications today
a. Audio Card c. Network Card
b. Graphics Card d. Adapter card

7) It is a free open source operating system.

a. Microsoft Windows c. Mac OS
b. Linux d. Chrome OS

8) A cabling is used to connect your wired network adapters to a router or

network switch.
a. Internet c. coaxial
b. Ethernet d. fiber optic
9) A glue that holds your home network together
a. router c. Hub
b. DSL d. Ethernet cable
10) The standard transfer speed of your wireless connection is
__________.
a. 802.11g c. 802.11m
b. 801.11g d. 802.11j
11) The wired half of your router has a speed of _____________.
a. 10/100 Mbps c. 100/1000 Mbps
b. 10/10/100 Mbps d. 10/10/1000 Mbps

314

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

12) Routers have two types of ports available at the back. Which is not
part of it?
a. LAN c. MAN
b. WAN d. WLAN
13) It basically means to create a redundant copy of a data.
a. Data Backup c. System restore
b. Image copy d. hardcopy
14) It refers to any kind of malicious codes, objects or content that
infiltrates your computer, resulting in damage and causing your system
to act in an undesirable manner.
a. Software c. Malware
b. Spyware d. Firmware
15) Software is used to identify problems on a computer or piece of
equipment.
a. Network software tool c. Diagnostic Software tool
b. Hardware Software tool d. Firmware software tool
16) Disk ________ rearranges fragmented data so your disks and drives
can work more efficiently.
a. Defragmenter c. software
b. Fragmenter d. defrag
17) It is a system-defined database which is used by an Operating
System to store all the information needed to configure the Windows
settings.
a. Registry c. Registration
b. Register d. Registering
18) This is an application that checks the computer’s hard drive for errors
and bad sectors.
a. Scan c. Scan Disk
b. System Restore d. Data backup
19) It is a computer maintenance utility that is included in the Microsoft
Windows operating system and it is designed to free up space on the
hard drive.
a. Network software tool c. Scan Disk
b. Data Backup d. Disk Cleanup
20) Network Diagnostic Tool is an efficient and reliable tool to help you
determine and identify the possible network issues that prevent you
from using your computer to the fullest.
a. Burn-in c. Diagnostic Software tool
b. Hardware Software tool d. Network Diagnostic tool

315

Downloaded by CANDIDO SORO ([email protected])

 lOMoARcPSD|16619061

III. Match Column A with Column B

Column A Column B
1. Creates and deletes disk A. Scan disk
partitions
2. Optimizes use of space on a B. Format
disk
3. Prepares a hard drive prior to C. Defrag
use
4. Removes unused files. D. Disk Cleanup
5. Checks for physical errors on E. Fdisk
the disk surface

316

Downloaded by CANDIDO SORO ([email protected])