CERTIFICATE OF COMPLIANCE
Certificate Number E212822
Report Reference E212822-20200529
Issue Date 2020-JUNE-03
Issued to: TECNOPLASTIC SRL
Via Calabria 3/5
35020 Saonara Pd ITALY
This certificate confirms that COMPONENT - MOTOR CONTROLLERS, FLOAT- AND
representative samples of PRESSURE-OPERATED
See Addendum for Models/Product
Have been investigated by UL in accordance with the
component requirements in the Standard(s) indicated on
this Certificate. UL Recognized components are incomplete
in certain constructional features or restricted in
performance capabilities and are intended for installation in
complete equipment submitted for investigation to UL LLC.
Standard(s) for Safety: UL 508 Industrial Control Equipment
CSA C22.2 No. 14-18 Industrial Control Equipment
Additional Information: See the UL Online Certifications Directory at
https://iq.ulprospector.com for additional information.
This Certificate of Compliance does not provide authorization to apply the UL Recognized Component Mark. Only
the UL Follow-Up Services Procedure provides authorization to apply the UL Mark.
Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified
and covered under UL’s Follow-Up Services.
Look for the UL Recognized Component Mark on the product.
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 1 of 2
CERTIFICATE OF COMPLIANCE
Certificate Number E212822
Report Reference E212822-20200529
Issue Date 2020-JUNE-03
This is to certify that representative samples of the product as specified on this certificate were tested
according to the current UL requirements.
USR, CNR - Motor Controllers, Float- and Pressure-operated
Cat. No. FOX followed by A, followed by 00 or 01 or 04 or 05, followed by SPST or SPDT, followed by
numeric value.
Cat. No. OLYMPIC followed by A , followed by 00 or 01 or 04, followed by SPST or SPDT, followed by
numeric value.
Cat. No. SUPERTEC followed by A , followed by 00 or 01 or 04, followed by SPST or SPDT, followed
by numeric value.
Cat. No. TAURUS followed by A , followed by 00 or 01 or 04, followed by SPST or SPDT, followed by
numeric value
Cat. No. MOUSE followed by A , followed by 00 or 01 or 03A or 03C or 03E or 04 or 05, followed by
SPDT or SPST, followed by numeric value
Bruce Mahrenholz, Director North American Certification Program
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/
Page 2 of 2
