EasyIO IT Network v1.

EasyIO IT Network Document

1
EasyIO IT Network v1.0

Document Change Log

16th May 2014

Document created.

2
EasyIO IT Network v1.0

Table of Contents
IT Network ......................................................................................................................................................4
1) EasyIO IP controllers default IPv4 address. ........................................................................................4
2) EasyIO IP controllers default IPv6 address. ........................................................................................4
3) EasyIO FG+ series controllers protocols and default ports used........................................................4
4) EasyIO FS series controllers protocols and default ports used. .........................................................5
5) EasyIO FW series controllers protocols and default ports used. .......................................................6
6) Sedona Protocol Connection (SOX) ....................................................................................................7
7) SSH, SFTP and FTP Protocols .............................................................................................................7
8) SSH, SFTP and FTP Protocols .............................................................. Error! Bookmark not defined.

3
 EasyIO IT Network v1.0

IT Network
1) EasyIO IP controllers default IPv4 address.
Model IP address Subnet Mask Default Gateway DHCP
Support
FG+ Series 192.168.10.11 255.255.255.0 192.168.10.1 No
FS Series 192.168.10.12 255.255.255.0 192.168.10.1 Yes
FW series 192.168.10.30 255.255.255.0 192.168.10.1 Yes

2) EasyIO IP controllers default IPv6 address.

Model IP address Subnet Mask Default Gateway DHCP
Support
FG+ Series Not supported Not supported Not supported No
FS Series Supported. Supported. Supported. Yes
Disable by default Disable by default Disable by default
FW series Supported. Supported. Supported. Yes
Disable by default Disable by default Disable by default

3) EasyIO FG+ series controllers protocols and default ports used.

Function Port Type Username Default Remarks

Password
Sedona (sox) 1876 UDP admin No Sedona sox protocol.
password Used for programming the EasyIO controllers.
(Leave it Recommend to create a password after
blank) commissioning is complete.
Default port can be change as well via CPT Tools
CPT graphics 21 TCP webuser 123456 Credentials for CPT graphics deployment.
deployment (FTP) Password can be change after a full deployment
done.
Password is changed via web browser.
Micro SD card (if 21 TCP sdcard 123456 Credentials for CPT graphics deployment.
a micro SD card is (FTP) Password can be change after a full deployment
insert ) done.
Password is changed via web browser.
CPT graphics 80 TCP admin hellocpt Credentials for CPT web graphics.
login via web (HTTP only) Password can be change after a full deployment
browser done.
Password is changed via web browser.
CPT RESTful 1001 UDP admin hellocpt Credentials for CPT web graphics.
HTTP API Password can be change after a full deployment
done.
Password is changed via web browser.
BACnet Protocol 47808 UDP - - BACnet protocol UDP port
Modbus TCP 502 TCP - - Modbus TCP protocol port
TCom 5021 UDP - - Tridium Niagara Framework Integration
Network Time 37 TCP - - Network Time Protocol . NTP.
4
 EasyIO IT Network v1.0

Protocol Client Time sync service.

SMTP User define TCP User Email User email SMTP supports SSL email servers.
account account
name password
EasyIO Peer to 6061 UDP - - EasyIO proprietary peer to peer protocol.
Peer Network Broadcast is used to notify all connected
controllers.

4) EasyIO FS series controllers protocols and default ports used.

Function Port Type Username Default Remarks

Password
Sedona (sox) 1876 UDP admin No Sedona sox protocol.
password Used for programming the EasyIO controllers.
(Leave it Recommend to create a password after
blank) commissioning is complete.
Default port can be change as well via CPT Tools
CPT graphics 21 TCP webuser 123456 Credentials for CPT graphics deployment.
deployment (FTP) Password can be change after a full deployment
done.
Password is changed via web browser.
Service can be turn OFF by user.
Micro SD card 21 TCP easyio 123456 Credentials for CPT graphics deployment.
(if a micro SD (FTP) Password can be change after a full deployment
card is insert ) done.
Password is changed via web browser.
Service can be turn OFF by user.
SSH 22 TCP easyio 123456 Credentials for CPT graphics deployment.
(SFTP) Password can be change after a full deployment
done.
Password is changed via web browser.
Service can be turn OFF by user.
CPT graphics 80 (HTTP) TCP admin hellocpt Credentials for CPT web graphics.
login via web 443 (HTTPS) Password can be change after a full deployment
browser done.
Password is changed via web browser.
CPT RESTful 1001 UDP admin hellocpt Credentials for CPT web graphics.
HTTP API Password can be change after a full deployment
done.
Password is changed via web browser.
BACnet Protocol 47808 UDP - - BACnet protocol UDP port
Modbus TCP 502 TCP - - Modbus TCP protocol port
TCom 5021 UDP - - Tridium Niagara Framework Integration
Network Time 37 TCP - - Network Time Protocol . NTP.
Protocol Client Time sync service.
SMTP User define TCP User Email User email SMTP supports SSL email servers.
account account
name password
EasyIO Peer to 6061 UDP - - EasyIO proprietary peer to peer protocol.
Peer Network Broadcast is used to notify all connected
controllers.
5
 EasyIO IT Network v1.0

MQTT Non-secured TCP MQTT MQTT MQTT V3.1.1 standard.

1883 broker broker Service can be turn OFF by user.
Secured at dependant dependant
8883

OpenVPN Client TCP OpenVPN

Samba 139 , 445 TCP - - Used for host name resolving ONLY.
No files transfer allowed.
Service can be turn OFF by user.

5) EasyIO FW series controllers protocols and default ports used.

Function Port Type Username Default Remarks

Password
Sedona (sox) 1876 UDP admin No Sedona sox protocol.
password Used for programming the EasyIO controllers.
(Leave it Recommend to create a password after
blank) commissioning is complete.
Default port can be change as well via CPT Tools
SSH 22 TCP easyio 123456 Credentials for CPT graphics deployment.
(SFTP) Password can be change after a full deployment
done.
Password is changed via web browser.
CPT graphics 80 (HTTP) TCP admin hellocpt Credentials for CPT web graphics.
login via web 443 (HTTPS) Password can be change after a full deployment
browser done.
Password is changed via web browser.
CPT RESTful 1001 UDP admin hellocpt Credentials for CPT web graphics.
HTTP API Password can be change after a full deployment
done.
Password is changed via web browser.
BACnet Protocol 47808 UDP - - BACnet protocol UDP port
TCom 5021 UDP - - Tridium Niagara Framework Integration
Network Time 37 TCP - - Network Time Protocol . NTP.
Protocol Client Time sync service.
SMTP User define TCP User Email User email SMTP supports SSL email servers.
account account
name password
EasyIO Peer to 6061 UDP - - EasyIO proprietary peer to peer protocol.
Peer Network Broadcast is used to notify all connected
controllers.
MQTT Non-secured TCP MQTT MQTT MQTT V3.1.1 standard.
1883 broker broker
Secured at dependant dependant
8883

Samba Used for host name resolving ONLY.

No files transfer allowed.

6
EasyIO IT Network v1.0

6) Sedona Protocol Connection (SOX)

EasyIO utilize Sedona Framework.
Sox protocol is the IP protocol used in connecting to a Sedona VM.
It utilize UDP port 1876.
A username and password is require to establish a connection to EasyIO Controllers.
Default username and password is as stated above.
However it is highly recommended that use change the factory default credentials upon completion
of commissioning period.

7) SSH, SFTP and FTP Protocols

EasyIO FS and FW series supports remote files transfer protocol.
Both secure (data encrypted) and non-secure is supported.
Non secure FTP Service can be turn OFF if require.
Service is protected with password however it is advisable to change the default factory credentials.

8) HTTP and HTTPS

EasyIO FS and FW series supports both HTTP (non secure) and HTTPS (secure)
In the event of controller require public remote access using internet connectivity HTTP can be turn
OFF for better security
Use HTTPS instead.
EasyIO HTTPS supports TLS v1.2.

9) RESTful API
EasyIO FS and FW series supports both HTTP (non secure) and HTTPS (secure) RESTful API protocol.
RESTFul API requires authentication before it can proceed to read or write into it.
In the event of controller require public remote access using internet connectivity, HTTP can be turn
OFF for better security
Use HTTPS instead.
EasyIO HTTPS supports TLS v1.2.