Technical Information Luviquat® Polymer

May 2012
Supersedes issue dated April 2011
Grades
04_050202e-08/Page 1 of 32

® = Registered trademark of BASF group Quaternized copolymers for hair and skin care

Personal Care
04_050202e-08 May 2012 Page 2 of 32 Luviquat Polymer Grades

Range The Luviquat grades are aqueous solutions of cationic polymers of different
charge density and different degrees of setting and conditioning.

Product INCI name CAS-No. PRD-No. Preservative*

Luviquat Supreme Polyquaternium-68 827346-45-2 30245053 0.75% Phenonip
Luviquat Supreme AT 1 Polyquaternium-68 827346-45-2 30500238 1% Euxyl® PE 9010
Luviquat UltraCare Polyquaternium-44 150599-70-5 30212365 0.5% Phenonip
Luviquat UltraCare AT 1 Polyquaternium-44 150599-70-5 30500962 0.75% Euxyl PE 9010
Luviquat Hold AT 2 Polyquaternium-46 174761-16-1 30054342 0.2% Euxyl K220
Luviquat Hold. Polyquaternium-46 174761-16-1 30238602 0.75% Phenonip
Luviquat PQ 11 AT 1 Polyquaternium-11 53633-54-8 30492732 0.75% Euxyl PE 9010
Luviquat PQ 11 PN Polyquaternium-11 53633-54-8 30060812 0.5% Phenonip
Luviquat HM 552 Polyquaternium-16 95144-24-4 30034753 No
Luviquat Style Polyquaternium-16 95144-24-4 30054527 0.5% Phenonip
Luviquat Style AT 1 Polyquaternium-16 95144-24-4 30502492 0.75% Euxyl PE 9010
Luviquat FC 370 Polyquaternium-16 95144-24-4 30035095 No
Luviquat FC 550 Polyquaternium-16 95144-24-4 30035096 No
Luviquat Excellence Polyquaternium-16 95144-24-4 30035097 No

* Phenonip (Clariant) or  henoxyethanol, Methylparaben, Ethylparaben,

P
Euxyl K300 (Schülke & Mayr): Butylparaben, Propylparaben, iso-Butylparaben
Water (see Q&RPI)
Euxyl K220:  0 – 90% Ethylhexylglycerin, 7 – 8% 2-Methyl­
8
isothiazolinon, Water (see Q&RPI)
Euxyl PE 9010:  henoxyethanol/Ethylhexylglycerin: 90:10 (see
P
Q&RPI)

Chemical description

Polyquaternium-68 Copolymer of vinylpyrrolidone (VP), methacrylamide (MAM), vinylimidazole (VI)

and quaternized vinylimidazole (QVI).

Polyquaternium-16 and Copolymers of vinylpyrrolidone (VP) and quaternized vinylimidazole (QVI) with a
Polyquaternium-44 range of charge densities, in aqueous solution.
04_050202e-08 May 2012 Page 3 of 32 Luviquat Polymer Grades

Polyquaternium-11 Quaternized copolymer of vinylpyrrolidone (VP) and dimethylaminoethyl

methacrylate (DMAEMA) in aqueous solution.

Polyquaternium-46 Copolymer of vinylcaprolactam (VCap),vinylpyrrolidone (VP) and quaternized

vinylimidazole (QVI) in aqueous solution.

Specifications See separate document: “Standard Specification” (not for regulatory purposes)
available via BASF’s WorldAccount: https://worldaccount.basf.com (registered
access).

Physicochemical properties

Appearance Clear to slightly turbid yellowish viscous liquids

Odor Slight, characteristic

Solubility Miscible with water

Molecular weight See table 1

Charge density See table 1

04_050202e-08 May 2012 Page 4 of 32 Luviquat Polymer Grades

Table 1: Composition, molecular weight and charge density of Luviquat range

Luviquat Composition, Anion Solids Molecular weight Charge

% weight content % (by light scattering) density
VP VI MAM QVI DMAEMA VCap meq/g at pH 7
Luviquat Supreme/Supreme AT 1 55 10 29 6 Methylsulfate 19 – 21 appr. 300,000 0.5a)
Luviquat UltraCare/UltraCare AT 1 80 20 Methylsulfate 12.5 – 13.5 appr. 200,000 1.0
Luviquat Hold AT 2/Hold. 40 10 50 Methylsulfate 19 – 21 appr. 700,000 0.5
Luviquat PQ 11 AT 1 67 33 Ethylsulfate 19 – 21 appr. 1,000,000 0.8
Luviquat PQ 11 PN 67 33 Ethylsulfate 19 – 21 appr. 1,000,000 0.8
Luviquat HM 552 55 45 Chloride 19 – 21 appr. 400,000 3.0
Luviquat Style/Style AT 1 55 45 Chloride 19 – 21 appr. 400,000 3.0
Luviquat FC 370 70 30 Chloride 38 – 42 appr. 100,000 2.0
Luviquat FC 550 50 50 Chloride 38 – 42 appr. 80,000 3.3
Luviquat Excellence 5 95 Chloride 38 – 42 appr. 40,000 6.1
a)
Charge density is a function of the pH-value: 0.9 meq/g at pH 5 and 0.6 meq/g at pH 6

Applications and The Luviquat range covers a wide spectrum of applications (Table 2), which
technical properties enables the formulator to select exactly the right product for his requirements.

Table 2 gives the basic applications and the recommended Luviquat grades.

Table 2: Applications
Hair and skin
Hair styling Skin care
conditioning

INCI designation Mousse, Gel Spray Conditioning Shampoo Body

Lotion rinse, Hair Shower Lotion,
treatment products Shaving
preparations

Luviquat Supreme/Supreme AT 1 Polyquaternium-68      

Luviquat UltraCare/UltraCare AT 1 Polyquaternium-44      
Luviquat Hold AT 2/Hold. Polyquaternium-46      
Luviquat PQ 11 PN/Luviquat PQ 11 AT 1 Polyquaternium-11      
Luviquat HM 552 Polyquaternium-16      
Luviquat Style/Style AT 1 Polyquaternium-16      
Luviquat FC 370 Polyquaternium-16      
Luviquat FC 550 Polyquaternium-16      
Luviquat Excellence Polyquaternium-16      

 cially recommended
 recommended
    
 not recommended

The Luviquat polymers are substantive cationic compounds for use as conditioners
and styling products in hair and skin care preparations.

Hair care As components in conditioners, shampoos, hair setting products, rinsing,

waving, bleaching and dyeing agents, the Luviquat polymers improve the wet
combability of the hair and prevent electrostatic charging when the hair is dry.
They also protect the hair, as the polymer forms a shield around each hair so
that its surface is less readily attacked.

The technical properties of the Luviquat grades are determined by their cationic
charge, molecular weight and the kind of monomers.
04_050202e-08 May 2012 Page 5 of 32 Luviquat Polymer Grades

Hair setting Luviquat Supreme/Supreme AT 1, Luviquat Hold AT 2/Hold., Luviquat PQ 11 PN,

Luviquat PQ 11 AT 1 and Luviquat Style/Style AT 1 are especially recommended
for styling products, e.g. hair mousses and lotions. Their high molecular weight
and their specific composition provide a good setting effect (Fig. 1).

Stiffness, cN -
Supreme/
Supreme AT 1
Hold AT 2/
Hold.
PQ 11 PN/
PQ 11 AT 1
Style/
Style AT 1
FC 370

FC 550

Excellence

0 50 100 150 200 250 300 350 400 450 500 550 600

Fig. 1: Setting effect (Stiffness test, 2.2% polymer content, 65% rel.hum.)

Hair mousses Hair mousses are usually expected to provide a setting effect as well as a
conditioning effect. For this reason, the high molecular weight products, Luviquat
Supreme/Supreme AT 1, Luviquat Hold AT 2/Hold., Luviquat Style/Style AT 1 and
Luviquat PQ 11 PN/Luviquat PQ 11 AT 1 are suitable.

Luviquat Supreme/Supreme AT 1 is an innovative styling polymer for hair mousse.

It provides ultrastrong hold and outstanding curl retention even at high humidity
levels. In addition, Luviquat Supreme/Supreme AT 1 has impressive conditioning
properties and gives even the finest hair more volume.

Another highlight is the combination of Luviquat Supreme/Supreme AT 1 and

Panthenol. The result is a highly flexible polymer film with a tremendous resistance
to breaking that ensures a natural, flexible hold regardless of the weather.

The benefits of Luviquat Supreme/Supreme AT 1 in detail:

• Maximum setting even in the most extreme conditions

• Strong hold all the way to natural, flexible hold with additives
• Excellent curl retention
• Very low tackiness
• Quick foam development
• Rich and creamy foam
• Hair that feels smooth
• Improves combability
• Increased volume for fine hair
• Easy solubility in water
• Combines styling and conditioning properties

Luviquat Supreme/Supreme AT 1 exhibits highest Curl Retention values even at

90% rel. hum., 25 °C (Fig. 2)

Luviquat Supreme, 2%
Luviquat Supreme AT 1, 2%

Luviquat Hold AT 2, 2%
Luviquat Hold., 2%

Luviquat PQ 11 PN, 2%
or Luviquat PQ 11 AT 1, 2%

Luviquat Style, 2.2%

Luviquat Style AT 1, 2.2%
20 40 60 80 100
Polymer content in standard mousse formulation Curl Retention (%)

Fig. 2: Curl Retention at 90% rel.hum., 25 °C

04_050202e-08 May 2012 Page 6 of 32 Luviquat Polymer Grades

Hair Gels Luviquat Hold AT 2/Hold. is recommended for hair gels with setting and conditioning
pro­perties (Fig. 3).

300 287

Stiffness Test (cN)

219
208

slightly almost almost

hazy clear clear

100
2.5% Luviquat Hold AT 2/ 2.5% Luviquat Hold AT 2/ 2.5% Luviquat Hold AT 2/
Hold. Hold. Hold.
= 0.5% polymer content 3.0% Luviscol VA 64 3.0% Luviscol VA 64
0.5% DL-Panthenol

Fig. 3: Carbomer Gels with Luviquat Hold AT 2/Hold. (0.5% Carbopol 940)

The carbomer compatibility of cationic polymers is very important if they are to

be used in hair gels. Luviquat Hold AT 2/Hold. has a particularly low charge
density and is therefore ideal for use in transparent hair gels.

Rinses, Treatments The Luviquat FC-grades and especially Luviquat Excellence are recommended
for rinses and hair treatments. Their relatively high cationic charge is responsible
for the good combability and for a strong conditioning effect (Fig. 4).

Reduction in combining force, %

Luviquat Excellence

Luviquat FC 550

Luviquat Style/Style AT 1

Luviquat PQ 11 PN/
Luviquat PQ 11 AT 1
Luviquat FC 370

Luviquat Hold AT 2/Hold.

0 20 40 60 80

Fig. 4: W
 et combability
After treatment with a 1% aqueous solution of the active substance, and
rinsing with water
04_050202e-08 May 2012 Page 7 of 32 Luviquat Polymer Grades

Shampoos and Luviquat UltraCare/UltraCare AT 1 has been developed to specifically address the
cleansing products needs for a conditioning agent, providing improved benefits in cleansing formulations
for hair and skin care, e.g. shampoos, shower gels and body washes. This polymer
has been especially designed to follow the „dilution-precipitation“ mechanism
according to Lochhead (Cosmetics & Toiletries, Vol 103, Dec. 1988) which is
important to be effective as a conditioning agent in surfactant-based formulations.
Luviquat UltraCare/UltraCare AT 1 improves the overall performance in Shampoos
(Fig. 5). It improves the wet and dry combability and provides a smooth silky feel
to the hair. The lather creaminess is significantly improved. Benefits are more
pronounced with damaged hair. There are no drawbacks with fine hair regarding
volume, accumulation and build-up.
The recommended use level is 0.1 – 0.2% for fine and normal hair and up to 0.5%
for damaged hair rsp. up to 1.0% for strong Asian hair.

Combing force reduction

(wet hair)

Fell No accumulation
of the air Removeability

Lather Clear
creaminess formulations

Hair volume (dry hair) Luviquat UltraCare/UltraCare AT 1

without polymer

Fig. 5: Performance of Luviquat UltraCare/UltraCare AT 1 in Shampoos

Luviquat UltraCare/UltraCare AT 1 visibly reduces skin irritation caused by sodium

lauryl sulfate (SLS). This could be demonstrated in the established in-vivo Duhring
chamber test by means of a visual assessment of the skin irritation (Fig. 6) and by
measuring the transepidermal water loss.

Counterirritant Product Erythema  TEWL Chromametry

Values
Water 0 0.3 - 0.5
0.2% SLS without polymer 1.5 3.9 2.9
0.2% SLS + 0.5% solids 0 1.5 1.3
Luviquat UltraCare/UltraCare AT 1
0.2% SLS + 1.0% solids 0 1.1 1.0
Luviquat UltraCare/UltraCare AT 1

Fig. 6: Luviquat UltraCare/UltraCare AT 1 – an effective counterirritant

Study by Derma Consult

 TEWL = Transepidermal water loss, increase relative to initial value Chromametry

Values (Redness), increase relative to initial value.
04_050202e-08 May 2012 Page 8 of 32 Luviquat Polymer Grades

Recommended formulations Hair Mousses

Styling mousse with Luviquat® Supreme/Supreme AT 1 No. 02/00479
% Ingredients Supplier INCI name
A 2.00 Luviquat Mono LS
®
(1) Cocotrimonium Methosulfate
q.s. Perfume
B 78.00 Water, dem. Aqua
10.00 Luviquat Supreme/ (1) Polyquaternium-68
Supreme AT 1
q.s. Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix phase A. Add components of phase B one after

the other and dissolve them. Fill with phase C.
Properties: pH value: 7.0

Styling mousse with Luviquat® Supreme/Supreme AT 1 No. 02/00485

and Luviquat Style/Style AT 1
% Ingredients Supplier INCI name
A 2.00 Luviquat Mono LS
®
(1) Cocotrimonium Methosulfate
q.s. Perfume
B 78.00 Water, dem. Aqua
2.50 Luviquat Style/ (1) Polyquaternium-16
Style AT 1
7.50 Luviquat Supreme/ (1) Polyquaternium-68
Supreme AT 1
q.s. Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix phase A. Add components of phase B one after

the other and dissolve them.
Fill with phase C.
Properties: pH value: 7.0

Styling Mousse with Luviquat® Supreme/Supreme AT 1 No. 02/00487

and Luviset® Clear/Clear AT 2
% Ingredients Supplier INCI name
A 2.00 Luviquat® Mono LS (1) Cocotrimonium Methosulfate
q.s. Perfume
B 78.00 Water, dem. Aqua
5.00 Luviset® Clear/ (1) VP/Methacrylamide/
Clear AT 2 Vinyl Imidazole Copolymer
5.00 Luviquat Supreme/ (1) Polyquaternium-68
Supreme AT 1
q.s. Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix phase A. Add components of phase B one after

the other and dissolve them.
Fill with phase C.
Properties: pH value: 7.0
04_050202e-08 May 2012 Page 9 of 32 Luviquat Polymer Grades

Styling mousse with Luviskol® VA 64 and No. 02/00491

Luviquat® Supreme/Supreme AT 1
% Ingredients Supplier INCI name
A 2.00 Luviquat® Mono LS (1) Cocotrimonium Methosulfate
q.s. Perfume
B 82.50 Water, dem. Aqua
3.00 Luviskol® VA 64 P (1) PVP/VA Copolymer
2.50 Luviquat Supreme/ (1) Polyquaternium-68
Supreme AT 1
q.s. Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix phase A. Add components of phase B one after

the other and dissolve them.
Fill with phase C.
Properties: pH value: 7.0

Pump mousse with Luviquat® Supreme/Supreme AT 1 No. 02/00494

% Ingredients Supplier INCI name
A 2.00 Luviquat Mono LS
®
(1) Cocotrimonium Methosulfate
q.s. Perfume
B 88.00 Water, dem. Aqua
10.00 Luviquat Supreme/ (1) Polyquaternium-68
Supreme AT 1
q.s. Preservative

Production: Mix phase A. Add components of phase B one after

the other and dissolve them.
Fill with phase C.
Properties: pH value: 7.0

Styling mousse with Luviquat® Supreme/Supreme AT 1 No. 02/00500

% Ingredients Supplier INCI name
A 2.00 Luviquat® Mono LS (1) Cocotrimonium Methosulfate
q.s. Perfume
B 80.30 Water, dem. Aqua
5.00 Luviquat Supreme/ (1) Polyquaternium-68
Supreme AT 1
0.50 D-Panthenol USP (1) Panthenol
2.00 1,2-Propylene Glycol (1) Propylene Glycol
Care
0.20 Natrosol 250 HR (4) Hydroxyethylcellulose
q.s. Preservative
q.s. Phosphoric Acid Phosphoric Acid
85%
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix phase A. Add components of phase B one after

the other and dissolve them. Adjust the pH value to
about 6. Fill with phase C.
Properties: pH value: 6.2
04_050202e-08 May 2012 Page 10 of 32 Luviquat Polymer Grades

Styling Mousse “Re-style” with Luviquat® Style/Style AT 1 No. 02/00044

% Ingredients Supplier INCI name
A q.s. Perfume
q.s. Cremophor® CO 40 (1) PEG-40 Hydrogenated Castor Oil
79.50 Water, dem. Aqua
B 10.00 Luviquat Style/
®
(1) Polyquaternium-16
Style AT 1
0.50 Luviquat Mono CP/ (1) Hydroxyethyl Cetyl­dimonium
Mono CP AT 1 Phosphate
q.s. Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Solubilize phase A. Weigh phase B into phase A

and dissolve clearly. Adjust the pH value to 6 – 7. Fill
into appropriate containers and charge with phase C.
Properties: pH value: 6.0

“Professional” Conditioning mousse with No. 02/00287

Luviquat® PQ 11 AT 1/PQ 11 PN and
Luviquat Mono CP/Mono CP AT 1
% Ingredients Supplier INCI name
A q.s. Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
q.s. Perfume
69.50 Water, dem. Aqua
B 10.00 Luviquat PQ 11 AT 1/
®
(1) Polyquaternium-11
PQ 11 PN
0.50 Luviquat Mono CP/ (1) Hydroxyethyl Cetyldimonium
Mono CP AT 1 Phosphate
10.00 Ethanol 96% Alcohol
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Solubilize phase A. Weigh phase B into phase A

and dissolve clearly.
Adjust the pH value to 6 – 7.
Fill into appropriate containers and charge with
phase C.
Properties: pH value: 7.0

“Professional” Setting Mousse No. 02/00364

% Ingredients Supplier INCI name
A 2.00 Luviquat Mono LS
®
(1) Cocotrimonium Methosulfate
q.s. Perfume
B 78.00 Water, dem. Aqua
10.00 Luviquat Hold AT 2/ (1) Polyquaternium-46
Hold.
q.s Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix phase A. Add phase B to phase A.

Stir in phase C. Adjust the pH-value to 6 – 7.
Fill into appropriate containers and charge with
phase D.
04_050202e-08 May 2012 Page 11 of 32 Luviquat Polymer Grades

Strong Setting Conditioning Mousse No. 02/00365

% Ingredients Supplier INCI name
A q.s Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
q.s. Perfume
81.50 Water, dem. Aqua
B 5.00 Luviquat PQ 11 AT 1/
®
(1) Polyquaternium-11
PQ 11 PN
3.00 Luviskol® VA 64 (1) VP/VA Copolymer
0.50 Luviquat Mono CP/ (1) Hydroxyethyl Cetyldimonium
Mono CP AT 1 Phosphate
q.s Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Solubilize phase A. Weigh phase B into phase A

and dissolve clearly. Adjust the pH-value to 6 – 7.
Fill into appropriate containers and charge with
phase C.
Properties: pH value: 6.0

„Invisible hold“ Pump mousse No. 02/00407

% Ingredients Supplier INCI name
A 1.50 Luviquat Mono LS
®
(1) Cocotrimonium Methosulfate
q.s. Perfume
B 90.80 Water, dem. Aqua
0.30 AMP (56) Aminomethyl Propanol
3.40 Luviflex Soft
®
(1) Acrylates Copolymer
4.00 Luviquat Hold AT 2/ (1) Polyquaternium-46
Hold.
q.s. Preservative

Production: Mix the components of phase A.

Add the components of phase B one after another
and dissolve them clearly.
Properties: pH value: 6.0
04_050202e-08 May 2012 Page 12 of 32 Luviquat Polymer Grades

Styling Mousse “Hair Balance” with No. 02/00341

Luviquat® Hold./Hold AT 2
% Ingredients Supplier INCI name
A q.s. Perfume
q.s. Cremophor® CO 40 (1) PEG-40 Hydrogenated Castor Oil
64.30 Water, dem. Aqua
B 2.50 Luviquat® Style/ (1) Polyquaternium-16
Style AT 1
7.50 Luviquat Hold AT 2/ (1) Polyquaternium-46
Hold.
0.50 Luviquat Mono CP/ (1) Hydroxyethyl Cetyldimonium
Mono CP AT 1 Phosphate
0.20 Cremophor A 25 (1) Ceteareth-25
15.00 Ethanol, abs. Alcohol
C 10.00 Propane/Butane Propane/ Butane
3.5 bar (20 °C)

Production: Solubilize the components of phase A. Weigh phase

B into phase A and stir until homgeneous. Adjust
the pH value to 6 – 7.
Fill into appropriate containers and charge with
phase C.

“Creamy Feel” Styling Foam No. 02/00349

% Ingredients Supplier INCI name
A q.s Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
q.s. Perfume
78.10 Water, dem. Aqua
B 10.00 Luviquat Hold AT 2/
®
(1) Polyquaternium-46
Hold.
0.50 Luviquat Mono CP/ (1) Hydroxyethyl Cetyldimonium
Mono CP AT 1 Phosphate
q.s Preservative
0.50 D-Panthenol USP (1) Panthenol
0.50 Pluracare E 400
®
(1) PEG-8
0.20 Cremophor A 25 (1) Ceteareth-25
0.20 Natrosol 250 HR (4) Hydroxyethylcellulose
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Solubilize phase A.

Add the components of phase B one after another
and dissolve them clearly.
Fill into appropriate containers and charge with
phase C.
Properties: pH value: 7.0
04_050202e-08 May 2012 Page 13 of 32 Luviquat Polymer Grades

Setting Conditioning Mousse No. 02/00368

% Ingredients Supplier INCI name
A q.s Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
q.s. Perfume
81.50 Water, dem. Aqua
B 5.00 Luviquat HM 552
®
(1) Polyquaternium-16
3.00 Luviskol VA 64
®
(1) VP/VA Copolymer
0.50 Luviquat Mono CP/ (1) Hydroxyethyl Cetyldimonium
Mono CP AT 1 Phosphate
q.s Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Solubilize phase A. Weigh phase B into phase A

and dissolve clearly. Adjust the pH-value to 6 – 7.
Fill into appropriate containers and charge with
phase C.
Properties: pH value: 6.0

“Feel the Hold” Setting/Conditioning Mousse No. 02/00426

% Ingredients Supplier INCI name
A 2.00 Luviquat® Mono LS (1) Cocotrimonium Methosulfate
q.s. Perfume
B 7.00 Luviquat Hold AT 2/ (1) Polyquaternium-46
Hold.
2.00 Luviquat PQ 11 AT 1/ (1) Polyquaternium-11
PQ 11 PN
0.20 Cremophor® A 25 (1) Ceteareth-25
0.50 D-Panthenol USP (1) Panthenol
0.05 Uvinul® MS 40 (1) Benzophenone-4
0.20 Dow Corning 949 (16) Amodimethicone, Cetrimonium
Cationic Emulsion Chloride, Trideeceth-12
0.20 Natrosol 250 HR (4) Hydroxyethylcellulose
15.00 Ethanol 96% Alcohol
62.85 Water, dem. Aqua
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix the components of phase A. Dissolve phase B

and stir it into phase A. Adjust the pH value to 6 – 7.
Fill into appropriate containers and charge with
phase C.
Properties: pH value: 7.0
04_050202e-08 May 2012 Page 14 of 32 Luviquat Polymer Grades

Styling/Conditioning Hair Mousse No. 02/00457

% Ingredients Supplier INCI name
A 2.00 Luviquat Mono LS
®
(1) Cocotrimonium Methosulfate
q.s. Perfume
B 73.00 Water, dem. Aqua
5.00 Luviquat Hold AT 2/ (1) Polyquaternium-46
Hold.
10.00 Luviset® Clear/ (1) VP/Methacrylamide/
Clear AT 2 Vinyl Imidazole Copolymer
q.s. Preservative
C 10.00 Propane/Butane Propane/Butane
3.5 bar (20 °C)

Production: Mix phase A and add the components of phase B

one after the other until a clear solution is formed.
Pressurize with phase C.
Properties: pH value: 6.9

Volumizing Mousse (VOC 6) No. 02/00580

% Ingredients Supplier INCI name
A 10.00 Luviset Clear/
®
(1) VP/Methacrylamide/Vinyl
Clear AT 2 Imidazole Copolymer
5.00 Luviquat® Hold AT 2/ (1) Polyquaternium-46
Hold.
47.70 Water, dem. Aqua
q.s. Preservative
B 30.00 Water, dem. Aqua
0.20 Cremophor A 25 ®
(1) Ceteareth-25
0.40 Luviquat Mono LS (1) Cocotrimonium Methosulfate
0.70 Rhodasurf L-3 (41) Laureth-3
q.s. Perfume
C 6.00 Propane/Butane Propane/Butane
(Propellant A70)

Procedure: Add ingredients of phase A in order listed with

adequate agitation, making sure all components are
completely dissolved before adding the next. Premix
ingredients of phase B until homogeneous. Add
phase B to phase A with adequate agitation. Fill into
appropriate containers and charge with propellant
(phase C).
Packaging info: White Coated Aluminium Can (Peerless Tube
Corporation).
04_050202e-08 May 2012 Page 15 of 32 Luviquat Polymer Grades

Hair Lotions
Styling water with Luviquat® Supreme/Supreme AT 1 No. 02/00493
% Ingredients Supplier INCI name
A 0.70 Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
0.20 Perfume
93.60 Water, dem. Aqua
B 5.00 Luviquat Supreme/
®
(1) Polyquaternium-68
Supreme AT 1
0.50 D-Panthenol USP (1) Panthenol
q.s. Preservative

Production: Solubilize phase A. Add components of phase B

one after the other and dissolve them clear. Fill with
phase C.
Properties: pH value: 7.0

Dry Blowing Lotion No. 02/00073

% Ingredients Supplier INCI name
0.20 Luviquat Excellence
®
(1) Polyquaternium-16
4.00 Luviskol VA 37 E
®
(1) VP/VA Copolymer
q.s. Perfume
35.00 Ethanol, abs. Alcohol
60.80 Water, dem. Aqua

Production: Weigh out the components and stir until a

homogeneous solution is obtained.
Properties: pH value: 7.0

Conditioning lotion No. 02/00111

% Ingredients Supplier INCI name
A q.s. Cremophor CO 40®
(1) PEG-40 Hydrogenated Castor Oil
q.s. Perfume
74.50 Water, dem. Aqua
B 5.00 Luviquat Style/
®
(1) Polyquaternium-16
Style AT 1
0.50 Luviquat Mono CP/ (1) Hydroxyethyl Cetyldimonium
Mono CP AT 1 Phosphate
20.00 Ethanol 96% Alcohol

Production: Solubilize phase A. Weigh phase B into phase A

and dissolve clearly.
Adjust the pH value to 6 – 7.
Properties: pH value: 7.0
04_050202e-08 May 2012 Page 16 of 32 Luviquat Polymer Grades

Setting Lotion No. 02/00233

% Ingredients Supplier INCI name
1.00 Luviquat FC 550
®
(1) Polyquaternium-16
6.00 Luviskol VA 37 E
®
(1) VP/VA Copolymer
q.s. Perfume
35.00 Ethanol 96% Alcohol
58.00 Water, dem. Aqua

Production: Weigh out the components and stir until a

homogeneous solution is obtained.

Blow-wave lotion with Luviquat® Mono LS No. 02/00354

% Ingredients Supplier INCI name
A 2.00 Luviquat Mono LS
®
(1) Cocotrimonium Methosulfate
0.20 Perfume
B 92.80 Water, dem. Aqua
5.00 Luviquat Hold AT 2/ (1) Polyquaternium-46
Hold.
q.s. Preservative

Production: Mix phase A, then add phase B and mix until

homogeneous.
Properties: pH value: 6.0

Emulsions
Blow Drying Lotion No. 02/00141
% Ingredients Supplier INCI name
A q.s. Perfume
q.s. Cremophor® CO 40 (1) PEG-40 Hydrogenated Castor Oil
68.30 Water, dem. Aqua
B 1.50 Luviskol K 30
®
(1) PVP
0.20 Luviquat Excellence
®
(1) Polyquaternium-16
30.00 Ethanol 96% Alcohol

Production: Solubilize the components of phase A. Weigh phase

B into phase A and stir until clear and homogeneous.
04_050202e-08 May 2012 Page 17 of 32 Luviquat Polymer Grades

Blow Drying Lotion “Feel your hair” No. 02/00402

% Ingredients Supplier INCI name
A 3.00 Luviquat Style/
®
(1) Polyquaternium-16
Style AT 1
5.00 Luviskol® VA 64 W (1) VP/VA Copolymer
1.00 1,2-Propylene Glycol (1) Propylene Glycol
Care
30.00 Ethanol 96% Alcohol
61.00 Water, dem. Aqua
q.s. Perfume

Production: Weigh out the components of phase A and dissolve

them clearly. Adjust the pH value to 6 – 7.
Properties: pH value: 6.0

“Hair treatment” emulsion No. 03/00008

% Ingredients Supplier INCI name
A 1.50 Cremophor® A 6 (1) Ceteareth-6, Stearyl Alcohol
1.50 Cremophor A 25 (1) Ceteareth-25
6.00 Luvitol® EHO (1) Cetearyl Ethylhexanoate
3.00 Lanette O (27) Cetearyl Alcohol
B 3.00 Luviquat® Excellence (1) Polyquaternium-16
0.50 Citric Acid (20) Citric Acid
2.00 1,2-Propylene Glycol (1) Propylene Glycol
Care
q.s. Preservative
82.50 Water, dem. Aqua
C q.s. Perfume

Production: Heat phases A and B separately to about 80 °C.

Stir phase B into phase A and homogenize.
Cool to about 40 °C, add phase C and homogenize
again.
Properties: pH value: 2.0
Viscosity: 2,000 mPa·s Haake Viscotester VT-02
04_050202e-08 May 2012 Page 18 of 32 Luviquat Polymer Grades

Cream rinse No. 03/00023

% Ingredients Supplier INCI name
A 1.00 Cremophor A 6 ®
(1) Ceteareth-6, Stearyl Alcohol
1.00 Cremophor A 25 (1) Ceteareth-25
2.00 Lanette O (27) Cetearyl Alcohol
2.00 Cutina GMS (27) Glyceryl Stearate
3.00 Paraffin Oil Mineral Oil
5.00 Luvitol EHO
®
(1) Cetearyl Ethylhexanoate
B 5.00 1,2 Propylene Glycol (1) Propylene Glycol
Care
4.00 Luviquat® FC 550 (1) Polyquaternium-16
q.s. Preservative
77.00 Water, dem. Aqua
C q.s. Perfume

Production: Heat phases A and B separately to about 80 °C.

Stir phase B into phase A and homogenize.
Cool to about 40 °C, add phase C and homogenize
again.
Properties: pH value: 6.0
Viscosity: 10,000 mPa·s Haake Viscotester VT-02

Conditioning emulsion No. 03/00030

% Ingredients Supplier INCI name
A 1.00 Cremophor A 6 ®
(1) Ceteareth-6, Stearyl Alcohol
1.00 Cremophor A 25 (1) Ceteareth-25
1.50 Lanette O (27) Cetearyl Alcohol
1.50 Cutina GMS (27) Glyceryl Stearate
3.00 Paraffin Oil Mineral Oil
5.00 Luvitol EHO
®
(1) Cetearyl Ethylhexanoate
B 5.00 1,2-Propylene Glycol (1) Propylene Glycol
Care
4.00 Luviquat® Style/ (1) Polyquaternium-16
Style AT 1
q.s. Preservative
78.00 Water, dem. Aqua
C q.s. Perfume

Production: Heat phases A and B separately to about 80 °C.

Stir phase B into phase A and homogenize.
Cool to about 40 °C, add phase C and homogenize
again.
Properties: pH value: 6.0
Viscosity: 3,000 mPa·s Haake Viscotester VT-02
04_050202e-08 May 2012 Page 19 of 32 Luviquat Polymer Grades

Hair gels
“Hair Gum” No. 03/00113
% Ingredients Supplier INCI name
A 0.50 Glucamate SSE-20 (3) PEG-20 Methyl Glucose
q.s. Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
q.s. Perfume
30.00 Water, dem. Aqua
B 10.00 Luviquat Hold AT 2/
®
(1) Polyquaternium-46
Hold.
2.00 Luviskol® K 90 (1) PVP
q.s. Preservative
0.50 D-Panthenol USP (1) Panthenol
5.00 Pluracare E 6000
®
(1) PEG 90
3.00 1,2 Propylene Glycol (1) Propylene Glycol
Care
46.50 Water, dem. Aqua
C 2.50 Natrosol 250 HR (4) Hydroxyethylcellulose

Production: Solubilize the components of phase A.

Dissolve phase B and stir it into phase A.
Stir phase C into the solution of the combined
phases A and B.
Properties: pH value: 6.0
Viscosity: 48,000 mPa·s Brookfield RVD VII+

Pump gel spray with Luviskol® VA 64 W and No. 04/00083

Luviquat® Hold AT 2/Hold.
% Ingredients Supplier INCI name
A 0.15 Carbopol 940 (6) Carbomer
Polymer
50.00 Water, dem. Aqua
B 6.00 Luviskol® VA 64 W (1) VP/VA Copolymere
0.50 Luviquat® Hold AT 2/ (1) Polyquaternium-46
Hold.
3.00 1,2-Propylene Glycol (1) Propylene Glycol
Care
20.00 Ethanol 96% Alcohol
20.15 Water, dem. Aqua
q.s. Perfume
q.s. Cremophor® CO 40 (1) PEG-40-Hydrogenated Castor
Oil
C 0.20 Triethanolamine (1) Triethanolamine
Care

Production: Leave Phase A to swell and neutralize with Phase C.

Weigh out the ingredients for Phase B and prepare
a clear solution. Stir Phase B into Phase A + C.
Properties: Clear gel spray for normal to good setting effect.
04_050202e-08 May 2012 Page 20 of 32 Luviquat Polymer Grades

Strong Styling/Conditioning Cream Gel No. 04/00091

% Ingredients Supplier INCI name
A q.s. Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
87.40 Water, dem. Aqua
q.s. Perfume
B 0.50 D-Panthenol USP (1) Panthenol
10.00 Luviquat Hold AT 2/
®
(1) Polyquaternium-46
Hold.
0.10 Dow Corning 190 (16) PEG/PPG-18/18 Dimethicone
Surfactant
q.s. Preservative
C 2.00 Natrosol 250 HR (4) Hydroxyethylcellulose

Production: Solubilize the components of phase A.

Add phase B and stir until a homogeneous solution is
obtained.
Dissolve phase C into the solution of phases A and B.
Properties: pH value: 7.0
Viscosity: 18,800 mPa·s Brookfield RVD VII+

“Fantasy” Hair Gel No. 04/00122

% Ingredients Supplier INCI name
A 48.85 Water, dem. Aqua
q.s. Preservative
B 0.50 Ultrez® 21 (6) Acrylates/C10-30 Alkyl Acrylate
Crosspolymer
C 0.75 Triethanolamine Care (1) Triethanolamine
D 15.00 Luviset Clear/
®
(1) VP/Methacrylamide/
Clear AT 2 Vinyl Imidazole Copolymer
30.20 Water, dem. Aqua
2.50 Luviquat Hold AT 2/
®
(1) Polyquaternium-46
Hold.
2.00 1,2-Propylene Glycol (1) Propylene Glycol
Care
q.s. Perfume
q.s. Cremophor® CO 40 (1) PEG-40 Hydrogenated Castor Oil
0.10 Uvinul P 25
®
(1) PEG-25 PABA
0.10 Siliconoil SF 1288®
(195) PEG-12 Dimethicone

Production: Put phase A into a beaker, stir and disperse phase

B into it until the particles sink to the bottom. Then
add phase C and stir until a homogeneous gel has
been formed. Prepare phase D and stir until dissol-
ved. Then add phase D to the gel.
Properties: pH value: 7.25
Viscosity : 44,000 mPa·s (Brookfield)
Transmission: 95.0% (600 nm)
04_050202e-08 May 2012 Page 21 of 32 Luviquat Polymer Grades

Sprays
Conditioning pump spray No. 01/00060
% Ingredients Supplier INCI name
2.00 Luviquat FC 550
®
(1) Polyquaternium-16
2.50 Luviskol VA 37 E
®
(1) VP/VA Copolymer
q.s. Perfume
35.00 Ethanol, abs. Alcohol
60.50 Water, dem. Aqua

Production: Weigh out the components and stir until a

homogeneous solution is obtained.

Styling Pump Spray No. 01/00481

% Ingredients Supplier INCI name
2.00 Luviquat FC 370
®
(1) Polyquaternium-16
10.00 Luviskol VA 37 E
®
(1) VP/VA Copolymer
q.s. Perfume
50.00 Ethanol, abs. Alcohol
38.00 Water, dem. Aqua

Production: Weigh out the components and stir until a

homogeneous solution is obtained.

“Conditioning” Aerosol spray No. 01/00497

% Ingredients Supplier INCI name
A 8.0 Luviskol® VA 37 E (1) VP/VA Copolymer
0.50 Luviquat® Excellence (1) Polyquaternium-16
0.10 Perfume
51.40 Ethanol, abs. Alcohol
B 40.00 Dimethyl Ether Dimethyl Ether

Production: Weigh out the components of phase A and stir until

a homogeneous solution is obtained.
Fill into appropriate containers and charge with
phase B.
Properties: Pressure: 2.7 bar (20 °C)
Density: 0.7632 g/ml
Cloud point: -35 °C clear

“Setting and Conditioning” Pump spray No. 02/00325

% Ingredients Supplier INCI name
A 5.00 Luviquat Hold AT 2/
®
(1) Polyquaternium-46
Hold.
q.s. Perfume
q.s. Cremophor® CO 40 (1) PEG-40 Hydrogenated Castor Oil
0.10 Uvinul® P 25 (1) PEG-25 PABA
0.50 D-Panthenol 50 P (1) Panthenol, Propylene Glycol
94.40 Water, dem. Aqua
q.s. Preservative

Production: Weigh out the ingredients and dissolve them clearly.

Properties: pH value: approx. 7
04_050202e-08 May 2012 Page 22 of 32 Luviquat Polymer Grades

Pump-Spray „Magic Style“ No. 02/00447

% Ingredients Supplier INCI name
A q.s. Cremophor CO 40 ®
(1) PEG-40 Hydrogenated Castor Oil
q.s. Perfume
75.50 Water, dem. Aqua
B 0.60 AMP (56) Aminomethyl Propanol
6.70 Luviflex Soft
®
(1) Acrylates Copolymer
C 1.00 1.2-Propylene Glycol (1) Propylene Glycol
Care
0.20 Uvinul® P 25 (1) PEG-25 PABA
1.00 Luviquat Style/
®
(1) Polyquaternium-16
Style AT 1
15.00 Ethanol 96% Alcohol

Production: Solubilize phase A. Add components of phase B

one after the other and dissolve them clear. Add
phase C and stir until dissolved clear.

Shampoos
Conditioner shampoo No. 08/00611
with Luviquat® UltraCare/UltraCare AT 1
% Ingredients Supplier INCI name
A 40.00 Texapon NSO (27) Sodium Laureth Sulfate
5.00 Plantacare 2000 (27) Decyl Glucoside
5.00 Tego Betain L 7 (44) Cocamidopropyl Betaine
q.s. Perfume
B 45.50 Water, dem. Aqua
1.50 Luviquat® UltraCare/ (1) Polyquaternium-44
UltraCare AT 1
0.50 D-Panthenol USP (1) Panthenol
q.s. Citric Acid (20) Citric Acid
q.s. Preservative
0.50 Dehydol LS 3 Deo N (27) Laureth-3
2.00 Sodium Chloride (20) Sodium Chloride

Production: Mix phase A. Add components of phase B one after

the other and dissolve clear. Adjust the pH value to
about 6 – 7.
Properties: pH value: 6.0
Viscosity: 4,800 mPa·s Brookfield RVD VII+
04_050202e-08 May 2012 Page 23 of 32 Luviquat Polymer Grades

Clear Conditioning Shampoo for fine hair No. 08/00612

% Ingredients Supplier INCI name
A 40.00 Texapon NSO (27) Sodium Laureth Sulfate
5.00 Tego Betain L7 (44) Cocamidopropyl Betaine
5.00 Plantacare 2000 (27) Decyl Glucoside
q.s. Perfume
B 0.80 Luviquat® UltraCare/ (1) Polyquaternium-44
UltraCare AT 1
q.s. Citric Acid pH 5 – 6 (20) Citric Acid
2.00 Sodium Chloride (20) Sodium Chloride
q.s. Preservative
47.20 Water, dem. Aqua

Production: Weigh out the components of phase A and mix them.

Add the components of phase B one after another and
dissolve them clearly. Adjust the pH value to 6 – 7.
Properties: pH value: 5.4
Viskosity: 2,300 mPa·s Brookfield RVD VII+

Clear Conditioning Shampoo for damaged hair and No. 08/00613

sensitive scalp
% Ingredients Supplier INCI name
A 5.00 Plantacare 2000 (27) Decyl Glucoside
q.s. Perfume
11.30 Texapon N 70 (27) Sodium Laureth Sulfate
5.00 Avanel S 150 CG
®
(1) Sodium C12-15
Pareth-15 Sulfonate
0.10 Phytantriol Phytantriol
B 3.80 Luviquat UltraCare
®
(1) Polyquaternium-44
UltraCare AT 1
q.s. Citric Acid pH 5 – 6 (20) Citric Acid
2.00 Dehydol LS 3 Deo N (27) Laureth-3
2.00 Sodium Chloride (20) Sodium Chloride
q.s. Preservative
69.80 Water, dem. Aqua
1.00 D-Panthenol USP (1) Panthenol

Production: Weigh out the components of phase A and mix them.

Add the components of phase B one after another and
dissolve them clearly. Adjust the pH value to 5 – 6.
Properties: pH value: 5.6
Viskosity: 2,230 mPa·s Brookfield RVD VII+
04_050202e-08 May 2012 Page 24 of 32 Luviquat Polymer Grades

Anti-Dandruff Shampoo No. 08/00617

% Ingredients Supplier INCI name
A 40.00 Texapon NSO (27) Sodium Laureth Sulfate
10.00 Tego Betain L7 (44) Cocamidopropyl Betaine
5.00 Lamesoft TM Benz (27) Glycol Distearate, Coco
Glucoside, Glyceryl Oleate,
Glyceryl Stearate
5.00 Rewopol SB FA 30 (47) Disodium Laureth Sulfosuccinate
0.50 Crinipan AD (26) Climbazole
q.s. Perfume
B 3.80 Luviquat® UltraCare/ (1) Polyquaternium-44
UltraCare AT 1
1.30 Sodium Chloride (20) Sodium Chloride
q.s. Preservative
34.40 Water, dem. Aqua
q.s. Sodium Hydroxide Sodium Hydroxide
10%

Production: Weigh out the components of phase A and mix them.

Add the components of phase B one after another
and dissolve them clearly. Adjust the pH value to 6-7.
Properties: pH value: 6.0
Viskosity: 4,200 mPa·s Brookfield RVD VII+

Clear mild conditioning Shampoo No. 08/00724

% Ingredients Supplier INCI name
A 1.25 Luviquat Excellence
®
(1) Polyquaternium-16
10.00 Amphotensid (159) Disodium Cocamidodiacetate
GB 2009
15.00 Tego Betain L7 (44) Cocamidopropyl Betaine
5.00 Plantacare 2000 (27) Decyl Glucoside
q.s. Citric Acid pH 6 – 7 (20) Citric Acid
2.00 Dehydol LS 3 Deo N (27) Laureth-3
5.00 Eumulgin SML 20 (27) Polysorbate 20
q.s. Perfume
q.s. Preservative
58.75 Water, dem. Aqua
B 3.00 Eumulgin EO 33 (27) PEG-150 Distearate

Production: Weigh out the components of phase A and dissolve

them. Adjust the pH value to 6 – 7. Add phase B
and heat the mixture to about 50 °C. Cool to room
temperature whilst stirring.
Properties: pH value: 6.7
Viskosity: 4,950 mPa·s Brookfield RVD VII+
04_050202e-08 May 2012 Page 25 of 32 Luviquat Polymer Grades

Shower gels/Soap
Clear Shower Gel with Luviquat® UltraCare/UltraCare AT 1 No. 08/00615
% Ingredients Supplier INCI name
3.80 Luviquat UltraCare/
®
(1) Polyquaternium-44
UltraCare AT 1
13.00 Texapon N 7O (27) Sodium Laureth Sulfate
7.50 Dehyton PK 45 (27) Cocamidopropyl Betaine
2.00 Cetiol HE (27) PEG-7-Glyceryl-Cocoate
q.s. Citric Acid (20) Citric Acid
1.00 D-Panthenol USP (1) Panthenol
1.50 Sodium Chloride (20) Sodium Chloride
q.s. Perfume
q.s. Preservative
71.20 Water, dem. Aqua

Production: Weigh out the components of phase A and mix them.

Add the components of phase B one after another and
dissolve them clearly. Adjust the pH value to 5 – 6.
Properties: pH value: 5.0
Viskosity: 2,500 mPa·s Brookfield RVD VII+

Moisturizing Shower Gel No. 08/00616

% Ingredients Supplier INCI name
A 11.30 Texapon NSO (27) Sodium Laureth Sulfate
6.60 Dehyton PK 45 (27) Cocamidopropyl Betaine
3.00 Plantacare 818 UP (27) Coco Glucoside
5.00 Lamesoft TM Benz (27) Glycol Distearate, Coco
Glucoside, Glyceryl Oleate,
Glyceryl Stearate
0.50 Perfume
B 3.80 Luviquat® UltraCare/ (1) Polyquaternium-44
UltraCare AT 1
1.50 Sodium Chloride (20) Sodium Chloride
q.s. Preservative
68.30 Water, dem. Aqua
q.s. Sodium Hydroxide Sodium Hydroxide
10%

Production: Weigh out the components of phase A and mix them.

Add the components of phase B one after another and
dissolve them clearly. Adjust the pH value to 5 – 6.
Properties: pH value: 5.1
Viskosity: 5,600 mPa·s Brookfield RVD VII+
04_050202e-08 May 2012 Page 26 of 32 Luviquat Polymer Grades

Shower gel with Luviquat® UltraCare/UltraCare AT 1 No. 08/00618

% Ingredients Supplier INCI name
A 40.00 Texapon NSO (27) Sodium Laureth Sulfate
10.00 Tego Betain L 7 (44) Cocamidopropyl Betaine
10.00 Rewopol SB FA 30 (40) Disodium Laureth Sulfosuccinate
3.00 Euperlan PK 771 (27) Sodium Laureth Sulfate, Glycol
Distearate, Cocamide MEA,
Laureth-10
q.s. Perfume
B 31.90 Water, dem. Aqua
3.80 Luviquat UltraCare/
®
(1) Polyquaternium-44
UltraCare AT 1
q.s. Preservative
1.30 Sodium Chloride (20) Sodium Chloride

Production: Weigh in components of phase A and dissolve. Add

components of phase B one after the other and
dissolve.
Properties: pH value: 6.0
Viscosity: 3,670 mPa·s Brookfield RVD VII+

Skin care
Body lotion with Luviquat® FC 550 No. 50/00006
% Ingredients Supplier INCI name
A 1.00 Cremophor A 6 ®
(1) Ceteareth-6, Stearyl Alcohol
1.00 Cremophor A 25 (1) Ceteareth-25
2.00 Lanette O (27) Cetearyl Alcohol
2.00 Cutina GMS (27) Glyceryl Stearate
3.00 Paraffin Oil Mineral Oil
5.00 Luvitol EHO
®
(1) Cetearyl Ethylhexanoate
B 5.00 1,2-Propylene Glycol (1) Propylene Glycol
Care
4.00 Luviquat® FC 550 (1) Polyquaternium-16
q.s. Preservative
77.00 Water, dem. Aqua
C q.s. Perfume

Production: Heat phases A and B separately to about 80 °C.

Stir phase B into phase A and homogenize.
Cool to about 40 °C, add phase C and homogenize
again.
Properties: pH value 6.0
Viscosity: 10,000 mPa·s Haake Viscotester VT-02
04_050202e-08 May 2012 Page 27 of 32 Luviquat Polymer Grades

Body Care Mousse No. 50/00058

% Ingredients Supplier INCI name
A 1.50 Cremophor A 6 ®
(1) Ceteareth-6 (and) Stearyl Alcohol
1.50 Cremophor A 25 (1) Ceteareth-25
4.00 Lanette O (27) Cetearyl Alcohol
10.00 Luvitol EHO
®
(1) Cetearyl Ethylhexanoate
1.00 Dow Corning 200 (44) Dimethicone
Fluid
B 2.50 1,2-Propylene Glycol (1) Propylene Glycol
Care
2.00 D-Panthenol USP (1) Panthenol
3.00 Luviquat FC 550
®
(1) Polyquaternium-16
q.s. Preservative
74.50 Water, dem. Aqua
C q.s. Perfume

Properties: Heat phases A and B separately to about 85 °C.

Stir phase B into phase A and homogenize. Cool to
40 °C, add phase C and homogenize again.
Cool to room temperature.
Filling: 90% active ingredient
10% Propane/Butane 3.5 bar (20 °C)

Face cleaning lotion No. 52/00092

% Ingredients Supplier INCI name
3.00 Cremophor CO 60
®
(1) PEG-60 Hydrogenated Castor Oil
0.10 Perfume
0.10 Bisabolol rac. (1) Bisabolol
0.10 Phytantriol Phytantriol
0.20 Vitamin E-Acetate (1) Tocopheryl Acetate
Care
30.00 Ethanol abs. Alcohol
2.00 Luviquat FC 370
®
(1) Polyquaternium-16
0.01 Uvinul D 50
®
(1) Benzophenone-2
1,00 D-Panthenol USP (1) Panthenol
q.s. Sicovit Patent Blue
®
C. I. 42 051. Acid Blue 3
85 E 131
63.49 Water, dem. Aqua

Production: Weigh in components of phase A and dissolve clear.

Properties: pH value: 7.3
04_050202e-08 May 2012 Page 28 of 32 Luviquat Polymer Grades

Suppliers 1. BASF SE
67056 Ludwigshafen, Germany
Tel.: +49(621) 60-0
Fax: +49(621) 60-42525
www.basf.com
3. Amerchol Corporation
136 Talmadge Road, NJ 08818 Edison, USA
Tel.: +1(908) 248-6000
Fax: +1(908) 287-4186
www.amerchol.com
4. Hercules Inc., Aqualon Division
1313 North Market Street, DE 19899 Wilmington, USA
Tel.: +1(302) 594-5000
Fax: +1(302) 594-6662
www.amerchol.com
6. The Lubrizol Corporation
29400 Lakeland Boulevard, Wickliffe, Ohio 44092, USA
Tel.: +1(440) 943 4200
www.lubrizol.com

9. Chemag AG
Senkenberganlage 10-12, 60325 Frankfurt/Main, Germany
Tel.: +49-69-7434-0
Fax: 411450-0

16. Dow Corning Corporation

2200 West Salzburg Road, MI 48686 Midland, USA
Tel.: +1(517) 496-6000
+1(800) 248-2481
Fax: +1(517) 496-6974
www.dow.com
20. Merck KGaA
Frankfurter Straße 250, 64293 Darmstadt, Germany
Tel.: +49(6151) 72-7869
Fax: +49(6151) 72-8333
www.merck.com
26. Haarmann & Reimer GmbH
Rumohrtalstraße1, 37603 Holzminden, Germany
Tel.: +49 (5531) 90 -0
+49 (5531) 90 -1673
Fax: +49 (5531) 90 -1649
+49 (5531) 90 -1845

27. BASF
Personal Care and Nutrition GmbH
Rheinpromenade 1, 40789 Monheim, Germany
Tel.: +49(2173) 4995-0
www.basf.com

41. Rhodia – Home, Personal Care and Industrial Ingredients

Prospect Plains Road, Building A, NJ 08512 Cranbury, USA
Tel.: +1(609) 860-4758
Fax: +1(609) 860-0555
04_050202e-08 May 2012 Page 29 of 32 Luviquat Polymer Grades

42. Schülke & Mayr GmbH

Robert-Koch-Str. 2, 22851 Norderstedt, Germany
Tel.: +49(40) 52100-0
Fax: +49(40) 52100-238
www.schuelke-mayr.com
44. Evonik Goldschmidt GmbH
Goldschmidtstraße 100, 45127 Essen, Germany
Tel.: +49(201) 173-01
Fax: +49(201) 173-3000
www.evonik.com
47. Witco Corporation
1 American Way, CT 06831 Greenwich, USA
Tel.: +1(203) 552-3373
Fax: +1(203) 552-2893
www.witco.com
70. Drom Fragrances International
Oberdiller Straße 18, 82065 Baierbrunn, Germany
Tel.: +49 (89) 744-250
Fax: +49 (89) 793-4966
www.drom.com
149. Stepan Company
22 West Frontage Road, IL 60093 Northfield, USA
Tel.: +1(847) 446-7500
Fax: +1(847) 501-2100
www.stepan.com
159. Zschimmer & Schwarz GmbH & Co.
Max-Schwarz-Str. 3-5, 56112 Lahnstein/Rhein, Germany
Tel.: +49 (2621) 12-0
Fax: +49 (2621) 12-407
www.zschimmer-schwarz.de
195. GE Silicones
260 Hudson River Road, 12 188 Waterford, New York, USA
Tel.: +1(518) 233-3330
Fax: +1(518) 233-2367
04_050202e-08 May 2012 Page 30 of 32 Luviquat Polymer Grades

Literature 1. Luviquat Grades – The Extensive Range of Cationic Conditioners

for Hair Care and Skin Care
Broschure MER 9953

2. Luviquat Care – An outstanding Conditioning Polymer for Shampoos

Broschure MER 9848e-699

3. Ethnic Hair Care – BASF-Making Your Ethnic Hair Care products better
Broschure 2000 BASF Corporation

4. Peter Hoessel, V. André, R. Nörenberg, J. Rieger, Hair Conditioning

Polymer/Surfactant Complexes: Structure and Efficacy, IFSCC Berlin
2000, submitted for SÖFW

5. Peter Hoessel, Reinhold Dieing, Michael Gotsche, Axel Jentzsch,

W. Schrof: Investigations of polymers for skin care, IFSCC Berlin 2000,
submitted for SÖFW

6. Peter Hoessel, Reinhold Dieing, Ralf Noerenberg, Andreas Pfau,

Ralf Sander Conditioning Polymers in Todays Shampoo
Formulations – Efficacy, Mechnism and Test Methods, Int. J. Cosm.
Sci., 22, p 1 (2000)

7. Peter Hoessel, Andreas Pfau, Ralf Sander Scanning Force Microscopy,

Parfumerie und Kosmetik 7-8/99, p 14

8. Ellen Pfrommer, Peter Hoessel; Polyquaternium-44 – A New

Conditioning Polymer for Shampoos, Seife Öle Fette Wachse,
12/1998, p 832

9. Andreas Pfau, Peter Hoessel, Sabine Vogt, Ralf Sander, Wolfgang

Schrepp; The Interaction of Cationic Polymsers with Human Hair;
Macromol. Symp. 126, p 341 (1997)

10. Peter Hoessel, Ralf Sander, Wolfgang Schrepp; Scanning Force

Microscopy; Cosmetics & Toiletries 111, p 57 (1996)

11. Peter Hoessel, Wolfgang Schrepp; Investigation of

Conditioning Polymers for Hair Styling; IFSCC
Between – Congress Montreux/France 1995

12. Peter Hoessel; Test Methods for polymeric Hair Conditioners;

Seife Öle Fette Wachse 14/94, p 847 (1994)

13. Peter Hoessel; Investigation of Conditioning Polymers for Hair Styling;

Preprint SCC, New York/USA 12/1998

14. K. Seib, F. G. M. Vogel; A Series of New Cationic Resins;

Soap/Cosmetics Chemical Specialities 10/1985

15. Peter Hoessel, Claudia Wood;Luviquat Ultra Care – An Effective

Conditioning
Polymer for Shampoos, Cosmetic Sciens Technology 2004,
P 127-132

16. Peter Hoessel, Claudia Wood, Marianna Pierobon

Polyquaternium-68: More than Hairstyling,
submitted for SOFW-Journal, May 2005
04_050202e-08 May 2012 Page 31 of 32 Luviquat Polymer Grades

Remarks Textile fibers can absorb cationic substances. Contact between cosmetic formulations
that contain cationic substances and fabrics should be avoided as interactions
with water-soluble dyes or soil during washing may cause spots.

Stability/Storage The Luviquat-grades have a shelf-life of 18 months.

Microbiology The microbial purity of the Luviquat grades is given in the specification. See Data
Sheet. All polymeric Luviquat grades have been subjected to the DAB/Ph. Eur.
bacterial challenge test and found to be adequately resistant to attack.

When containers of aqueous solutions, such as our Luviquat grades are opened,
the possibility of contamination cannot be excluded. We therefore recommend
that the entire contents be used up at once.

Toxicology An investigation of the raw material gave no indication of harmful effects to health
if the substance is used for the stated applications and con­centrations. Due to
the large variety of applications and possible com­binations with other products,
users are responsible for their own safety assessment of their products.

Safety Data Sheet Safety Data Sheets for our Luviquat grades are available.

Note This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors may
affect processing or application/use, we recommend that you make tests to
determine the suitability of a product for your particular purpose prior to use. It
does not relieve our customers from the obligation to perform a full inspection of
the products upon delivery or any other obligation. NO WARRANTIES OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT
INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE
SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE
CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.

May 2012
04_050202e-08 May 2012 Page 32 of 32 Luviquat Polymer Grades

BASF SE - Care Chemicals Division - Personal Care - 67056 Ludwigshafen - www.personal-care.basf.com