Scribd
Upload
27 views5 pages

ACME Trapezoid Thread

Uploaded by

Eko Priambodo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views5 pages

ACME Trapezoid Thread

Uploaded by

Eko Priambodo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

2/7/2020 External ACME Thread General Purpose Size Table Chart | Engineers Edge | www.engineersedge.

com

A privacy, disclaimer and tracking cookie usage reminder from Engineers Edge. To learn more,
see our Privacy Policy / Cookie Usage & Disclaimer links at bottom of webpage.

Got It!

Related Resources: hardware

External ACME Thread General Purpose Size Table Chart


ANSI Hardware Engineering Data
Internal ACME Thread General Purpose Size Chart

The following table defines recommended industry standard sizes for External ACME General Purpose Threads per American National
Standard ASME/ANSI B1.5.

There are three classes of General Purpose ACME threads, 2G, 3G, and 4G each class provides some clearance on all standard size
diameters for free movement, and are used in assemblies with the internal thread rigidly fixed and movement of the external thread in a
direction perpendicular to its axis limited by its bearing or bearings.

Designs should only utilize external and internal ACME threads of the same class and type, with Class 2G being the preferred choice. If
less backlash or end play is desired, Classes 3G and 4G are provided. Class 5G is not recommended for new designs.

https://www.engineersedge.com/hardware/external_acme_thread_13360.htm 1/5
2/7/2020 External ACME Thread General Purpose Size Table Chart | Engineers Edge | www.engineersedge.com

General Pupose ACME External Thread Table Chart

Size Tol. Major Dia. Pitch Dia. Minor Dia.


Designation TPI
Decimal Class Max. Min. Max. Min. Max Min.
1/4-16 Acme 0.25 16 2G 0.2500 0.2450 0.2148 0.2043 0.1775 0.1618
1/4-16 Acme 0.25 16 3G 0.2500 0.2450 0.2158 0.2109 0.1775 0.1702
1/4-16 Acme 0.25 16 4G 0.2500 0.2450 0.2168 0.2133 0.1775 0.1722
1/4-16 Acme 0.25 16 5G 0.2500 0.2450 0.2188 0.2160 0.1775 0.1733
5/16-14 Acme 0.3125 14 2G 0.3125 0.3075 0.2728 0.2614 0.2311 0.2140
5/16-14 Acme 0.3125 14 3G 0.3125 0.3075 0.2738 0.2685 0.2311 0.2231
5/16-14 Acme 0.3125 14 4G 0.3125 0.3075 0.2748 0.271 0.2311 0.2254
5/16-14 Acme 0.3125 14 5G 0.3125 0.3075 0.2768 0.2738 0.2311 0.2266
3/8-12 Acme 0.375 12 2G 0.3750 0.3700 0.3284 0.3161 0.2817 0.2632
3/8-12 Acme 0.375 12 3G 0.3750 0.3700 0.3296 0.3238 0.2817 0.2730
3/8-12 Acme 0.375 12 4G 0.3750 0.3700 0.3309 0.3268 0.2817 0.2755
3/8-12 Acme 0.375 12 5G 0.3750 0.3700 0.3333 0.33 0.2817 0.2767
7/16-12 Acme 0.4375 12 2G 0.4375 0.4325 0.3909 0.3783 0.3442 0.3253
7/16-12 Acme 0.4375 12 3G 0.4375 0.4325 0.3921 0.3862 0.3442 0.3354
7/16-12 Acme 0.4375 12 4G 0.4375 0.4325 0.3934 0.3892 0.3442 0.3379
7/16-12 Acme 0.4375 12 5G 0.4375 0.4325 0.3958 0.3924 0.3442 0.3391
1/2-10 Acme 0.5 10 2G 0.5000 0.4950 0.4443 0.4306 0.3800 0.3594
1/2-10 Acme 0.5 10 3G 0.5000 0.4950 0.4458 0.4394 0.3800 0.3704
1/2-10 Acme 0.5 10 4G 0.5000 0.4950 0.4472 0.4426 0.3800 0.3731
1/2-10 Acme 0.5 10 5G 0.5000 0.4950 0.45 0.4463 0.3800 0.3745
5/8-8 Acme 0.625 8 2G 0.6250 0.6188 0.5562 0.5408 0.4800 0.4569
5/8-8 Acme 0.625 8 3G 0.6250 0.6188 0.5578 0.5506 0.4800 0.4692
5/8-8 Acme 0.625 8 4G 0.6250 0.6188 0.5593 0.5542 0.4800 0.4723
5/8-8 Acme 0.625 8 5G 0.6250 0.6188 0.5625 0.5584 0.4800 0.4738
3/4-6 Acme 0.75 6 2G 0.7500 0.7417 0.6598 0.6424 0.5633 0.5372
3/4-6 Acme 0.75 6 3G 0.7500 0.7417 0.6615 0.6534 0.5633 0.5511
3/4-6 Acme 0.75 6 4G 0.7500 0.7417 0.6632 0.6574 0.5633 0.5546
3/4-6 Acme 0.75 6 5G 0.7500 0.7417 0.6667 0.662 0.5633 0.5563
7/8-6 Acme 0.875 6 2G 0.8750 0.8667 0.7842 0.7663 0.6883 0.6615
7/8-6 Acme 0.875 6 3G 0.8750 0.8667 0.7861 0.7778 0.6883 0.6758
7/8-6 Acme 0.875 6 4G 0.8750 0.8667 0.788 0.782 0.6883 0.6794
7/8-6 Acme 0.875 6 5G 0.8750 0.8667 0.7917 0.7869 0.6883 0.6811
1-5 Acme 1 5 2G 1.0000 0.9900 0.892 0.8726 0.7800 0.7509
1-5 Acme 1 5 3G 1.0000 0.9900 0.894 0.8849 0.7800 0.7664
1-5 Acme 1 5 4G 1.0000 0.9900 0.896 0.8895 0.7800 0.7703
1-5 Acme 1 5 5G 1.0000 0.9900 0.9 0.8948 0.7800 0.7722
1 1/8-5 Acme 1.125 5 2G 1.1250 1.1150 1.0165 0.9967 0.9050 0.8753

https://www.engineersedge.com/hardware/external_acme_thread_13360.htm 2/5
2/7/2020 External ACME Thread General Purpose Size Table Chart | Engineers Edge | www.engineersedge.com

1 1/8-5 Acme 1.125 5 3G 1.1250 1.1150 1.0186 1.0094 0.9050 0.8912


1 1/8-5 Acme 1.125 5 4G 1.1250 1.1150 1.0208 1.0142 0.9050 0.8951
1 1/8-5 Acme 1.125 5 5G 1.1250 1.1150 1.025 1.0197 0.9050 0.8971
1 1/4-5 Acme 1.25 5 2G 1.2500 1.2400 1.1411 1.121 1.0300 0.9998
1 1/4-5 Acme 1.25 5 3G 1.2500 1.2400 1.1433 1.1339 1.0300 1.0159
1 1/4-5 Acme 1.25 5 4G 1.2500 1.2400 1.1455 1.1388 1.0300 1.0199
1 1/4-5 Acme 1.25 4 5G 1.2500 1.2400 1.15 1.1446 1.0300 1.0219
1 3/8-4 Acme 1.375 4 2G 1.3750 1.3625 1.2406 1.2188 1.1050 1.0720
1 3/8-4 Acme 1.375 4 3G 1.3750 1.3625 1.243 1.2327 1.1050 1.0896
1 3/8-4 Acme 1.375 4 4G 1.3750 1.3625 1.2453 1.238 1.1050 1.0940
1 3/8-4 Acme 1.375 4 5G 1.3750 1.3625 1.25 1.2441 1.1050 1.0962
1 1/2-4 Acme 1.5 4 2G 1.5000 1.4875 1.3652 1.3429 1.2300 1.1965
1 1/2-4 Acme 1.5 4 3G 1.5000 1.4875 1.3677 1.3573 1.2300 1.2144
1 1/2-4 Acme 1.5 4 4G 1.5000 1.4875 1.3701 1.3627 1.2300 1.2189
1 1/2-4 Acme 1.5 4 5G 1.5000 1.4875 1.375 1.369 1.2300 1.2210
1 3/4-4 Acme 1.75 4 2G 1.7500 1.7375 1.6145 1.5916 1.4800 1.4456
1 3/4-4 Acme 1.75 4 3G 1.7500 1.7375 1.6171 1.6064 1.4800 1.4640
1 3/4-4 Acme 1.75 4 4G 1.7500 1.7375 1.6198 1.6122 1.4800 1.4686
1 3/4-4 Acme 1.75 4 5G 1.7500 1.7375 1.625 1.6189 1.4800 1.4708
2-4 Acme 2 4 2G 2.0000 1.9875 1.8637 1.8402 1.7300 1.6948
2-4 Acme 2 4 3G 2.0000 1.9875 1.8665 1.8555 1.7300 1.7135
2-4 Acme 2 4 4G 2.0000 1.9875 1.8693 1.8615 1.7300 1.7183
2-4 Acme 2 4 5G 2.0000 1.9875 1.875 1.8687 1.7300 1.7206
2 1/4-3 Acme 2.25 3 2G 2.2500 2.2333 2.0713 2.045 1.8967 1.8572
2 1/4-3 Acme 2.25 3 3G 2.2500 2.2333 2.0743 2.062 1.8967 1.8783
2 1/4-3 Acme 2.25 3 4G 2.2500 2.2333 2.0773 2.0685 1.8967 1.8835
2 1/4-3 Acme 2.25 3 5G 2.2500 2.2333 2.0833 2.0763 1.8967 1.8862
2 1/2-3 Acme 2.5 3 2G 2.5000 2.4833 2.3207 2.2939 2.1467 2.1065
2 1/2-3 Acme 2.5 3 3G 2.5000 2.4833 2.3238 2.3113 2.1467 2.1279
2 1/2-3 Acme 2.5 3 4G 2.5000 2.4833 2.327 2.3181 2.1467 2.1333
2 1/2-3 Acme 2.5 3 5G 2.5000 2.4833 2.333 2.3262 2.1467 2.1360
2 3/4-3 Acme 2.75 3 2G 2.7500 2.7333 2.57 2.5427 2.3967 2.3558
2 3/4-3 Acme 2.75 3 3G 2.7500 2.7333 2.5734 2.567 2.3967 2.3776
2 3/4-3 Acme 2.75 3 4G 2.7500 2.7333 2.5767 2.5676 2.3967 2.3831
2 3/4-3 Acme 2.75 3 5G 2.7500 2.7333 2.5833 2.576 2.3967 2.3858
3-2 Acme 3 2 2G 3.0000 2.9750 2.736 2.7044 2.4800 2.4326
3-2 Acme 3 2 3G 3.0000 2.9750 2.7395 2.7248 2.4800 2.4579
3-2 Acme 3 2 4G 3.0000 2.9750 2.743 2.7325 2.4800 2.4642
3-2 Acme 3 2 5G 3.0000 2.9750 2.75 2.7416 2.4800 2.4674
3 1/2-2 Acme 3.5 2 2G 3.5000 3.4750 3.235 3.2026 2.9800 2.9314
3 1/2-2 Acme 3.5 2 3G 3.5000 3.4750 3.2388 3.2237 2.9800 2.9574
3 1/2-2 Acme 3.5 2 4G 3.5000 3.4750 3.2425 3.2317 2.9800 2.9638
3 1/2-2 Acme 3.5 2 5G 3.5000 3.4750 3.25 3.2413 2.9800 2.9669
4-2 Acme 4 2 2G 4.0000 3.9750 3.734 3.7008 3.4800 3.4302
4-2 Acme 4 2 3G 4.0000 3.9750 3.738 3.7225 3.4800 3.4568
4-2 Acme 4 2 4G 4.0000 3.9750 3.742 3.7309 3.4800 3.4634
4-2 Acme 4 2 5G 4.0000 3.9750 3.75 3.7411 3.4800 3.4666

https://www.engineersedge.com/hardware/external_acme_thread_13360.htm 3/5
2/7/2020 External ACME Thread General Purpose Size Table Chart | Engineers Edge | www.engineersedge.com

4 1/2-2 Acme 4.5 2 2G 4.5000 4.4750 4.233 4.1991 3.9800 3.9291


4 1/2-2 Acme 4.5 2 3G 4.5000 4.4750 4.2373 4.2215 3.9800 3.9563
4 1/2-2 Acme 4.5 2 4G 4.5000 4.4750 4.2415 4.2302 3.9800 3.9631
4 1/2-2 Acme 4.5 2 5G 4.5000 4.4750 4.25 4.2409 3.9800 3.9663
5-2 Acme 5 2 2G 5.0000 4.9750 4.7319 4.6973 4.4800 4.4281
5-2 Acme 5 2 3G 5.0000 4.9750 4.7364 4.7202 4.4800 4.4557
5-2 Acme 5 2 4G 5.0000 4.9750 4.7409 4.7294 4.4800 4.4627
5-2 Acme 5 2 5G 5.0000 4.9750 4.75 4.7408 4.4800 4.4662

Related Resouces:

Internal ACME Thread General Purpose Size Chart


ANSI, ISO Thread Designations and References
Stub Acme Single-Start Screw Threads
ACME Screw Worm Gear Axial Force Equation and Calculator
ACME General Purpose Thread Design Calculator

DENKO Single / Straight


Telescopic...
Rp 2,0 JT
Load Capacity (kg) : 150
Material : Alumunium 6063
Thickness (mm) : 1.3 - 1.4...
monotaro.id

© Copyright 2000 - 2020, by Engineers Edge, LLC www.engineersedge.com


All rights reserved
Disclaimer | Feedback | Advertising | Contact

Date/Time: 07.02.2020 09:05

User Reviews/Comments:

There are currently no comments available.

Add a Comment (you must be logged in to post comment Register):

Name:

Email: (Optional)

Comment:

Add

Membership
https://www.engineersedge.com/hardware/external_acme_thread_13360.htm 4/5
2/7/2020 External ACME Thread General Purpose Size Table Chart | Engineers Edge | www.engineersedge.com
Register | Login

Search

Home
Engineering Book Store
Engineering Forum
Excel App. Downloads
Online Books & Manuals
Engineering News
Engineering Videos
Engineering Calculators
Engineering Toolbox
GD&T Training Geometric
Dimensioning Tolerancing
DFM DFA Training
Training Online Engineering
Advertising Center

Follow @engineersedge

TRANSLATE

Print Webpage

Copyright Notice

Toko
Online
untuk
Perusaha

https://www.engineersedge.com/hardware/external_acme_thread_13360.htm 5/5

You might also like