GSM/GPRS/GPS Tracker GL200

Manage Tool User Guide

TRACGL200MT002
Revision: 2.04

http://www.queclink.com
[email protected]
GL200 Manage Tool User Guide

Document Title GL200 Manage Tool User Guide

Version 2.04

Date 2014-09-04

Status Release

Document Control ID TRACGL200MT002

General Notes
Queclink offers this information as a service to its customers, to support application and

k
engineering efforts that use the products designed by Queclink. The information provided is

n
based upon requirements specifically provided to Queclink by the customers. Queclink has

i
not undertaken any independent search for additional relevant information, including any

l l
information that may be in the customer’s possession. Furthermore, system validation of this

c
product designed by Queclink within a larger electronic system remains the responsibility of

ia
the customer or the customer’s system integrator. All specifications supplied herein are

e t
subject to change.

u n
Copyright

Q fide
This document contains proprietary technical information which is the property of Queclink
Limited., copying of this document and giving it to others and the using or communication of
the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights reserved in the event of grant of a patent or the registration of
a utility model or design. All specification supplied herein are subject to change without

n
notice at any time.

o
Copyright © Queclink Wireless Solutions Co., Ltd. 2011

C
TRACGL200MT002 -1-
GL200 Manage Tool User Guide

Contents

Contents ............................................................................................................................................ 2
1. Revision history ............................................................................................................................ 4
2. GL200 Manage Tool Interface ...................................................................................................... 5
2.1. System Requirements .......................................................................................................... 5
2.2. COM Setting ....................................................................................................................... 6
2.3. Quick Setting Wizard .......................................................................................................... 6
2.4. Professional Setting Windows ............................................................................................. 7
2.4.1 Title Bar ...................................................................................................................... 7

k
2.4.2 Menus ......................................................................................................................... 7
2.4.3 Toolbar...................................................................................................................... 10

i n
2.4.4 Status Bar.................................................................................................................. 11

l l
2.4.5 Command Browser and Command Operation Space ............................................... 11
2.5. Operation Result Interface ................................................................................................ 13

c a
2.5.1 Operation Successfully Interface .............................................................................. 13

e t i
2.5.2 Operation Failed Interface ........................................................................................ 13
3. Operation Instruction .................................................................................................................. 15

u n
3.1. Device Configuration with Quick Setting Wizard............................................................. 15
3.1.1 Welcome to Quick Setting Wizard............................................................................ 15

Q fide
3.1.2 GPRS Network Setting ............................................................................................. 15
3.1.3 Main Server Setting .................................................................................................. 16
3.1.4 Fixed Time Report Setting........................................................................................ 17
3.1.5 Send Command to Device ........................................................................................ 18
3.2. Device Configuration in Professional Setting Mode ......................................................... 20

n
3.2.1 Set the parameters of Bearer Setting Information .................................................... 20

o
3.2.2 Set the parameters of Backend Server Register Information .................................... 21
3.2.3 Set the parameters of Quick Start Setting ................................................................. 22

C
3.2.4 Set the parameters of Global Configuration ............................................................. 23
3.2.5 Set the parameters of Auto-Unlock PIN ................................................................... 24
3.2.6 Set the parameters of Protocol Watchdog ................................................................. 25
3.2.7 Set the parameters of Time Adjustment .................................................................... 26
3.2.8 Set the parameters of Non Movement Detection ...................................................... 27
3.2.9 Set the parameters of Function Key Setting ............................................................. 28
3.2.10 Set the parameters of Outside Working Hours ....................................................... 29
3.2.11 Set the parameters of Jamming Detection .............................................................. 30
3.2.12 Set the parameters of Preserve special device logical state .................................... 31
3.2.13 Set the parameters of Fixed Report Information .................................................... 32
3.2.14 Set the parameters of Geo-Fence Information ........................................................ 33
3.2.15 Set the parameters of Speed Alarm......................................................................... 34
3.2.16 Set the parameters of Digital Output Port Settings................................................. 35
3.2.17 Set the parameters of Digital Input Port Setting ..................................................... 36
3.2.18 Set the parameters of Real Time Operation ............................................................ 37
TRACGL200MT002 -2-
GL200 Manage Tool User Guide

3.2.19 Set the parameters of Transparent Data Transmission ............................................ 38

3.2.20 Set the parameters of White Call List Configuration ............................................. 39
3.2.21 Set the parameters of Google link SMS configuration ........................................... 40
3.2.22 Set the parameters of Network Select..................................................................... 41
3.2.23 Set the parameters of Store Command String ......................................................... 42
3.2.24 Set the parameters of User Defined Function ......................................................... 43
3.2.25 Set the parameters of Safe Flight Manager............................................................. 44
3.2.26 Set the parameters of Update configuration over the air ........................................ 45
3.3. Read/Save All Configuration............................................................................................. 46
3.4. Load/Execute All Configuration ....................................................................................... 47

i n k
cl ia l
u e n t
Q fide
o n
C
TRACGL200MT002 -3-
GL200 Manage Tool User Guide

1. Revision history

Revision Date Author Description of change

2.00 2011-7-20 Marry ma Instruction of the Manage Tool V3.0 which apply
to software version GL200R00A09V05M32_SST
and GL200R00A09V06M128_NMX
2.01 2011-08-16 Marry ma Add chapter 2.1 to define system requirements.
2.02 2011-10-26 Elkan Du Instruction of the Manage Tool V3.2 which apply

k
to software version GL200R00A10V05M32_SST
and GL200R00A10V02M128_NMX

n
2.03 2013-05-02 Miranda 1. Add chapter 3.2.10, 3.2.20, 3.2,21, 3.2.22 and

l i
Wang 3.2.23;

l
2. Instruction of the Manage Tool V3.8 which

c a
apply to software version

e i
GL200R00A17V11M128_NMX

t
2.04 2014-09-04 Vega Yu Instruction of the Manage Tool V4.4 which apply

u n
to software version
GL200R00A21V04M128_NMX

Q fide
o n
C
TRACGL200MT002 -4-
GL200 Manage Tool User Guide

2. GL200 Manage Tool Interface

GL200 manage tool is PC software which can be used to configure GL200 through
Data_Cable_M. It is easy for the backend server developers to configure GL200 with manage tool,
which has friendly user interface. The correct command messages sent to GL200 will be displayed
on the manage tool. (These messages can also be sent by SMS or GPRS ).

The administrators can also use the manage tool to configure GL200 before selling. But it is
strongly recommended to establish a backend server and implement the way to control GL200 by

k
SMS or GPRS. Please refer to “GL200 @Track Air Interface Protocol” for detail.

i n
Before using the manage tools please find “PL2303_Prolific_DriverInstaller_v130.zip” in develop

l l
suit and install the drive for PL2303. After that a new COM port can be found in the PC system,

c
and then please follow the steps as below:

a
1. Power on GL200.

e t i
2. Connect GL200 to PC with Data_Cable_M.
3. Run “Queclink GL200 Manage Tool Vx.xx.exe”.

u
Q fide n
2.1. System Requirements

In order for this manager tool to run on your computer, you must use it in below operating system:
♦ Windows 98SE;

n
♦ Windows ME Windows 2000 SP4;
♦ Windows XP SP2 and above (32 & 64 bit);

o
♦ Windows Server 2003 (32 & 64 bit);
♦ Windows Server 2008 (32 & 64 bit);

C
♦ Windows Vista (32 & 64 bit);
♦ Windows 7 (32 & 64 bit);

Supported System Environments:

♦ Microsoft .NET Framework 2.0 or higher

TRACGL200MT002 -5-
GL200 Manage Tool User Guide

2.2. COM Setting

i n k
Select the COM port, input the password “gl200”, and the main window will display.

cl l
2.3. Quick Setting Wizard

e t ia
The quick setting wizard gives a basic setting for device. If you want use more functions of

u
GL200, please change to enter professional setting mode.

Q fide n
Before you enter quick setting wizard, you must make sure the COM connection is OK.

Please refer chapter 3.1 for the detail of setting with quick setting wizard.

o n
C
TRACGL200MT002 -6-
 GL200 Manage Tool User Guide

2.4. Professional Setting Windows

Menus

Toolbar

Command
Browser

k
Command

n
Operation

l i
Space

c a l
Title Bar

e t i
Status Bar

u
Q fide n
2.4.1 Title Bar

Title Bar indicates current operational command title.

2.4.2 Menus

n
It include “Start”, “Tool”, “Help” menu in menus.

Co
2.4.2.1 Start Menu

Start menu include “COM Settings”.

[COM Setting]: It is used to set the COM information and password Setting details, please refer
to chapter 2.2

2.4.2.2 Tool Menu

Tool menu include “Quick Setting Wizard”, ”Operation Log”, “Options” setting.

[Quick Setting Wizard]: It is used to open quick setting wizard directly. Please refer to chapter
3.1 for details.

TRACGL200MT002 -7-
 GL200 Manage Tool User Guide

[Operation Log]: It is used to display/hidden the operation log.

i n k
l
Operation

l
Log

e c t ia
u
[Options]: It is used to set the basic setting of manage tool.

Q fide n
“Basic Options” include startup setting options and log save option.

o n
C
“Advanced Options” include COM settings and other settings.
COM Settings is used to set enable/disable slowclock control. It is recommended using default
setting for these settings.

TRACGL200MT002 -8-
GL200 Manage Tool User Guide

i n k
cl ia l
e
2.4.2.3 Help Menu

t
Help menu include “About” and “Diagnosis”.

u n
[About]: Select “About”. Then the following pop up window will display.

Q fide
o n
C
“Tool Version” indicates the version of this manage tool.
“Support Version” indicates the firmware which this manage tool used for.
“Unit Version” indicates the firmware which connects to the PC. It is recommended using the
same version of support version. If it is different between support version and device version, the
new character of device can not be used in this tool.

TRACGL200MT002 -9-
GL200 Manage Tool User Guide

“Device IMEI” indicates the IMEI which connects to the PC.

[Diagnosis]: Select “Diagnosis”. Then the following pop up window will display.

i n k
cl ia l
u e n t
Q fide
This function is only for technology diagnosis when the device report data abnormally, please
ignore it when it works normally.

2.4.3 Toolbar

n
It include “COM Setting”, “Operation Log”, “Quick Setting Wizard”, “Real All Configuration”,
“Execute All Configuration” , “Save All Configuration”, “Connect/Disconnect to COM”.

Co
[COM Setting]: It is used to set the COM information and password. Setting details please refer
to chapter 2.1.

[Operation Log]: It is used to display/hidden operation log.

[Quick Setting Wizard]: It is used to open quick setting wizard directly. Please refer to chapter
3.1 for details.

[Read All Configuration]: It is used to display/hidden operation log.

“Read From Device”: It is used to read all configuration from device which connects to PC.

TRACGL200MT002 - 10 -
GL200 Manage Tool User Guide

“Load Configuration From File”: It is used to load configuration file to the manage tool.

[Send All Configuration]: It is used to execute all configurations in Command Operation Space
except GTRTO.

[Save All Configuration]: It is used to save all configurations in Command Operation Space to
file.

[Connect/Disconnect to COM]: It is used to Connect/Disconnect to COM manually.

2.4.4 Status Bar

i n k
l l
There is system status and current status in status bar.

c ia
[System Status]: It indicates the count of commands which are waiting and executing to set.

u e n t
[Current Status]: It indicates current COM status, IMEI, protocol version and software version
which read from device.

Q fide
2.4.5 Command Browser and Command Operation Space

This area is mainly read and set parameters of device

n
2.4.5.1 Command Brower

o
Command Brower separates all @track protocol command to several parts. Click Function in
command Brower, reference parameters of this command will be shown in command operation

C
space.
Command Brower Function Description Relative Command
Bearer Setting Information GTBSI
Server Connection Backend Server Register Information GTSRI
Quick Start Settings GTQSS
Global Configuration GTCFG
Auto-Unlock PIN GTPIN
Software Protocol Watchdog GTDOG
Time Adjustment GTTMA
Device Configuration Non Movement Detection GTNMD
Function Key Setting GTFKS
Outside Working Hours GTOWH
Jamming Detection GTJDC
Preserve special device logical state GTPDS

TRACGL200MT002 - 11 -
 GL200 Manage Tool User Guide

Position Related Report Fixed Position Report GTFRI

Geo-Fence Configuration GTGEO
Alarm Setting
Speed Alarm GTSPD
Digital Output Port Settings GTOUT
IO Application
Digital Input Settings GTDIS
Real Time Operation GTRTO
Transparent Data Transmission GTDTA
White Call List Configuration GTWLT
Google Link SMS Configuration GTGLM
Other Settings Netwoek Select GTNTS
Store Command String GTCMD

k
User Defined Function GTUDF
Safe Flight Manager GTSFM

i n
Update configuration over the air GTUPC

cl l
2.4.5.2 Command Operation Space

e ia
Command

t
Description

Parameters
Area
u
Q fide n
o n
Command
Display
C
[Command Description]: There is a short description for reference command.

[Parameters Area]: Set/Read parameters of this command in this area.

[Command Display]: Command with parameters in parameters area display in this area.

[Read]: Click this button to read this command from device.

TRACGL200MT002 - 12 -
GL200 Manage Tool User Guide

[Send]: Click this button to send this command to device.

2.5. Operation Result Interface

2.5.1 Operation Successfully Interface

Command read OK.

i n k
cl ia l
e t
Command send OK.

u
Q fide n
o n
2.5.2 Operation Failed Interface

C
There should be COM port connection problem if the fail reason is timeout.

There should be COM port is occupied. Please close all other COM-related applications.

TRACGL200MT002 - 13 -
GL200 Manage Tool User Guide

Please change to correct device password if Password Error.

i n k
cl ia l
u e t
There are some issues with this com, please check your com wire or port.

Q fide n
o n
C
TRACGL200MT002 - 14 -
GL200 Manage Tool User Guide

3. Operation Instruction

3.1. Device Configuration with Quick Setting Wizard

The manage tool is developed based on the @Track Air Interface Protocol. Please refer to “GL200
@Track Air Interface Protocol” for detail.

The quick setting wizard gives a basic setting for device. If you want use more functions of

k
GL200, please change to professional setting mode.

i n
3.1.1 Welcome to Quick Setting Wizard

l l
Click “Quick Setting Wizard” in toolbar, open quick setting wizard. If the “Result” in this window

c a
is OK, click “Next”. If the “Result” is not OK, please check the COM port connection till the

e i
result is OK.

u n t
Q fide
o n
C
Welcome to Quick Setting Wizard

3.1.2 GPRS Network Setting

Step_1: Set APN, APN user name and password in this window. The meaning of these parameters,

TRACGL200MT002 - 15 -
 GL200 Manage Tool User Guide

please refer to the “GL200 @Track Air Interface Protocol” for detail.

Step_2: Then click “Next”.

Step_1

i n k
cl ia l
Step_2

u e n t
Q fide
3.1.3 Main Server Setting

Step_1: Set report mode, main server, main server port, and SMS gateway in this window. The

n
meaning of these parameters, please refer to the “GL200 @Track Air Interface Protocol” for detail.

o
Step_2: Click “Check if main backend server is available” to check if main server IP and port is
valid in network. If the result is ERROR, please check the server connection. You can not get

C
report from server if the server connection has problem.

Step_3: Click “Next”.

TRACGL200MT002 - 16 -
 GL200 Manage Tool User Guide

Step_1

Step_2

i n k
cl ia l
e
Step_3

u n t
3.1.4 Fixed Time Report Setting

Q fide
Step_1: Set check interval, send interval, discard no fix in this window. The meaning of these
parameters, please refer to the “GL200 @Track Air Interface Protocol” for detail.

Step_2: Click “Next”.

o n
C
TRACGL200MT002 - 17 -
 GL200 Manage Tool User Guide

Step_1

i n k
cl ia l
u e n t
Step_2

Q fide
3.1.5 Send Command to Device

Step_1: Click “Send Command”. Command GTBSI, GTSRI, and GTFRI will send to device.

n
Step_2: If the settings download successfully, the result return OK. Click “OK” to exit the quick
setting wizard.

Co

TRACGL200MT002 - 18 -
 GL200 Manage Tool User Guide

i n k
cl ia l
u e n t
Step_1

Q fide
o n
Step_2
C
TRACGL200MT002 - 19 -
 GL200 Manage Tool User Guide

3.2. Device Configuration in Professional Setting Mode

The manage tool is developed based on the @Track Air Interface Protocol. Please refer to “GL200
@Track Air Interface Protocol” for detail.

Following is a general procedure to configure GL200 with manage tool.

3.2.1 Set the parameters of Bearer Setting Information

Step_1

i n k
l l
Step_4

e c t ia
u
Step_2

Q fide n
Step_3

Step_5

Step_1: Select “Bearer Setting Information”, after that the parameters of GTBSI show in

n
Command Operation Space.

o
Step_2: The command message which shall be sent to GL200 will be generated based on input

C
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

Step_4: Set APN parameters. Please refer to “GL200 @Track Air Interface Protocol” for the
meaning of each parameter.

Step_5: Click the “Send” button; download the parameters of GTBSI to GL200.

TRACGL200MT002 - 20 -
 GL200 Manage Tool User Guide

3.2.2 Set the parameters of Backend Server Register Information

Step_1

Step_4

Step_2

k
Step_3

n
Step_5

cl i a l
Step_1: Select “Backend Server Register Information”, after that the parameters of GTSRI show

i
in Command Operation Space.

u e n t
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200

Q fide
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them

Step_4: Set Backend Server Information parameters. Please refer to “GL200 @Track Air Interface

n
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTSRI to GL200.

C
TRACGL200MT002 - 21 -
 GL200 Manage Tool User Guide

3.2.3 Set the parameters of Quick Start Setting

Step_1

Step_4

k
Step_3

cl i n l
Step 5

a
Step_2

u e n t i
Step_1: Select “Quick Start Settings”, after that the parameters of GTQSS show in Command

Q fide
Operation Space.

Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

n
Step_3: It is recommended to read the parameters from GL200 and edit based on them

o
Step_4: Set the GPRS and backend server information parameters. Please refer to “GL200

C
@Track Air Interface Protocol” for the meaning of each parameter.

Step_5: Click the “Send” button; download the parameters of GTQSS to GL200.

TRACGL200MT002 - 22 -
 GL200 Manage Tool User Guide

3.2.4 Set the parameters of Global Configuration

Step_1
Step_4

Step_3

k
Step_2
Step_5

cl i n l
ia
Step_1: Select “Global Configuration”, after that the parameters of GTCFG show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them

n
Step_4: Set the Global parameters. Please refer to “GL200 @Track Air Interface Protocol” for the
meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTCFG to GL200.

C
TRACGL200MT002 - 23 -
 GL200 Manage Tool User Guide

3.2.5 Set the parameters of Auto-Unlock PIN

Step_4

Step_1

Step_3
Step_2

k
Step_5

cl i n l
ia
Step_1: Select “Auto-Unlock-PIN”, after that the parameters of GTPIN show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them

n
Step_4: Set the auto-unlock PIN parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTPIN to GL200.

C
TRACGL200MT002 - 24 -
 GL200 Manage Tool User Guide

3.2.6 Set the parameters of Protocol Watchdog

Step_1

Step_4

Step_2 Step_3

k
Step_5

cl i n l
ia
Step_1: Select “Software Protocol Watchdog”, after that the parameters of GTDOG show in

e t
Command Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them

n
Step_4: Set the Software Protocol Watchdog parameters. Please refer to “GL200 @Track Air
Interface Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTDOG to GL200.

C
TRACGL200MT002 - 25 -
 GL200 Manage Tool User Guide

3.2.7 Set the parameters of Time Adjustment

Step_4
Step_1

k
Step_3

n
Step_2

l i l
Step_5

c ia
Step_1: Select “Time Adjustment”, after that the parameters of GTTMA show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Time Adjustment parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTTMA to GL200.

C
TRACGL200MT002 - 26 -
 GL200 Manage Tool User Guide

3.2.8 Set the parameters of Non Movement Detection

Step_4
Step_1

k
Step_3
Step_2

n
Step_5

cl i a l
i
Step_1: Select “Non Movement Detection”, after that the parameters of GTNMD show in

e t
Command Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Non Movement Detection parameters. Please refer to “GL200 @Track Air
Interface Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTNMD to GL200.

C
TRACGL200MT002 - 27 -
 GL200 Manage Tool User Guide

3.2.9 Set the parameters of Function Key Setting

Step_4

Step_1

k
Step_3

n
Step_2

i
Step_5

cl ia l
Step_1: Select “Function Key Setting”, after that the parameters of GTFKS show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Function Key parameters. Please refer to “GL200 @Track Air Interface Protocol”
for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTFKS to GL200.

C
TRACGL200MT002 - 28 -
 GL200 Manage Tool User Guide

3.2.10 Set the parameters of Outside Working Hours

Step_4

Step_1

k
Step_3

n
Step_2

i
Step_5

cl ia l
Step_1: Select “Outside Working Hours”, after that the parameters of GTOWH show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Outside Working Hours parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTOWH to GL200.

C
TRACGL200MT002 - 29 -
 GL200 Manage Tool User Guide

3.2.11 Set the parameters of Jamming Detection

Step_4

Step_1

k
Step_3

n
Step_2

i
Step_5

cl ia l
Step_1: Select “Jamming Detection”, after that the parameters of GTJDC show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Outside Working Hours parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTJDC to GL200.

C
TRACGL200MT002 - 30 -
 GL200 Manage Tool User Guide

3.2.12 Set the parameters of Preserve special device logical state

Step_4

Step_1

k
Step_3

n
Step_2

i
Step_5

cl ia l
Step_1: Select “Preserve special device logical state”, after that the parameters of GTPDS show

e t
in Command Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Outside Working Hours parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTPDS to GL200.

C
TRACGL200MT002 - 31 -
 GL200 Manage Tool User Guide

3.2.13 Set the parameters of Fixed Report Information

Step_4
Step_1

Step_2 Step_3

n k
Step_5

cl i a l
u e n t i
Q fide
Step_4

o n
C
Step_1: Select “Fixed Position Report”, after that the parameters of GTFRI show in Command
Operation Space.

Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them

Step_4: Set the scheduled report parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

Step_5: Click the “Send” button; download the parameters of GTFRI to GL200.

TRACGL200MT002 - 32 -
 GL200 Manage Tool User Guide

3.2.14 Set the parameters of Geo-Fence Information

Step_1
Step_4

k
Step_3

n
Step_2

cl i l
Step_5

e t ia
Step_1: Select “Geo-Fence Configuration”, after that the parameters of GTGEO show in

u n
Command Operation Space.

Q fide
Step_2: The command message which shall be sent to GL200 will be generated based on input
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them

n
Step_4: Set the Geo-Fence parameters. Please refer to “GL200 @Track Air Interface Protocol” for

o
the meaning of each parameter.

C
Step_5: Click the “Send” button; download the parameters of GTGEO to GL200.

TRACGL200MT002 - 33 -
 GL200 Manage Tool User Guide

3.2.15 Set the parameters of Speed Alarm

Step_4
Step_1

Step_3
Step_2

n k
Step_5

l i l
Step_1: Select “Speed Alarm”, after that the parameters of GTSPD show in Command Operation

c a
Space.

e t i
Step_2: The command message which shall be sent to GL200 will be generated based on input

u n
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Q fide
Step_3: It is recommended to read the parameters from GL200 and edit based on them

Step_4: Set the Speed Alarm parameters. Please refer to “GL200 @Track Air Interface Protocol”
for the meaning of each parameter.

n
Step_5: Click the “Send” button; download the parameters of GTSPD to GL200.

Co

TRACGL200MT002 - 34 -
 GL200 Manage Tool User Guide

3.2.16 Set the parameters of Digital Output Port Settings

Step_3
Step_1

k
Step_2
Step_4

n
Step_1: Select “Digital Output Port Setting”, after that the parameters of GTOUT show in

l i
Command Operation Space.

c a l
Step_2: The command message which shall be sent to GL200 will be generated based on input

i
and displayed here. Please note this command message can also be sent to GL200 through

e t
SMS or GPRS.

u n
Step_3: Set the Digital Output parameters. Please refer to “GL200 @Track Air Interface Protocol”

Q fide
for the meaning of each parameter.

Step_4: Click the “Send” button; download the parameters of GTOUT to GL200.

o n
C
TRACGL200MT002 - 35 -
 GL200 Manage Tool User Guide

3.2.17 Set the parameters of Digital Input Port Setting

Step_1 Step_4

Step_3

k
Step_2

i n
Step_5

cl ia l
Step_1: Select “Digital Input Port Setting”, after that the parameters of GTDIS show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Digital Input parameters. Please refer to “GL200 @Track Air Interface Protocol”
for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTDIS to GL200.

C
TRACGL200MT002 - 36 -
 GL200 Manage Tool User Guide

3.2.18 Set the parameters of Real Time Operation

Step_3

Step_1

k
Step_2

n
Step_4

cl i a l
i
Step_1: Select “Real Time Operation”, after that the parameters of GTRTO show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: Set the Real Time Operation parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

n
Step_4: Click the “Send” button; download the parameters of GTRTO to GL200.

Co

TRACGL200MT002 - 37 -
 GL200 Manage Tool User Guide

3.2.19 Set the parameters of Transparent Data Transmission

Step_3

Step_1

k
Step_2

i n
Step_4

cl ia l
Step_1: Select “transparent data transmission”, after that the parameters of GTDAT show in

e t
Command Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.

Step_3: Set the Transparent Data Transmission parameters. Please refer to “GL200 @Track Air
Interface Protocol” for the meaning of each parameter.

n
Step_4: Click the “Send” button; download the parameters of GTDAT to GL200.

Co

TRACGL200MT002 - 38 -
 GL200 Manage Tool User Guide

3.2.20 Set the parameters of White Call List Configuration

Step_4
Step_1

Step_3

Step_2

i n k Step_5

cl ia l
Step_1: Select “White Call List Configuration”, after that the parameters of GTWLT show in

e t
Command Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the White Call List parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTWLT to GL200.

C
TRACGL200MT002 - 39 -
 GL200 Manage Tool User Guide

3.2.21 Set the parameters of Google link SMS configuration

Step_4
Step_1

Step_3

k
Step_2

n
Step_5

cl i a l
i
Step_1: Select “Google Link SMS Configuration”, after that the parameters of GTGLM show in

e t
Command Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Google link SMS parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTGLM to GL200.

C
TRACGL200MT002 - 40 -
 GL200 Manage Tool User Guide

3.2.22 Set the parameters of Network Select

Step_4

Step_1

Step_3

k
Step_2

n
Step_5

cl i a l
i
Step_1: Select “Network Select”, after that the parameters of GTNTS show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Digital Input parameters. Please refer to “GL200 @Track Air Interface Protocol”
for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTNTS to GL200.

C
TRACGL200MT002 - 41 -
 GL200 Manage Tool User Guide

3.2.23 Set the parameters of Store Command String

Step_4

Step_1

Step_3

k
Step_2

n
Step_5

cl i a l
i
Step_1: Select “Store Command String”, after that the parameters of GTCMD show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Store Command parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTCMD to GL200.

C
TRACGL200MT002 - 42 -
 GL200 Manage Tool User Guide

3.2.24 Set the parameters of User Defined Function

Step_4

Step_1

Step_3

k
Step_2

n
Step_5

cl i a l
i
Step_1: Select “Store Command String”, after that the parameters of GTUDF show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the User Defined parameters. Please refer to “GL200 @Track Air Interface Protocol”
for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTUDF to GL200.

C
TRACGL200MT002 - 43 -
 GL200 Manage Tool User Guide

3.2.25 Set the parameters of Safe Flight Manager

Step_4

Step_1
Step_3

n k
Step_2 Step_5

cl i a l
i
Step_1: Select “Store Command String”, after that the parameters of GTSFM show in Command

e t
Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Safe Flight Manager parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTSFM to GL200.

C
TRACGL200MT002 - 44 -
 GL200 Manage Tool User Guide

3.2.26 Set the parameters of Update configuration over the air

Step_4

Step_1
Step_3

n k
Step_2 Step_5

cl i a l
i
Step_1: Select “Update configuration over the air”, after that the parameters of GTUPC show in

e t
Command Operation Space.

u n
Step_2: The command message which shall be sent to GL200 will be generated based on input

Q fide
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.

Step_3: It is recommended to read the parameters from GL200 and edit based on them.

n
Step_4: Set the Safe Flight Manager parameters. Please refer to “GL200 @Track Air Interface
Protocol” for the meaning of each parameter.

o
Step_5: Click the “Send” button; download the parameters of GTUPC to GL200.

C
TRACGL200MT002 - 45 -
GL200 Manage Tool User Guide

3.3. Read/Save All Configuration

Step_1: It is recommended to read all configurations from device before save the configuration.
Select “Read All Configuration””Read From Device”.

Step_2: After read successfully, click “Save All Configuration” in toolbar.

i n k
l l
Step_3: Select a folder, and key in the name of configuration file, then click “Save” button.

e c t ia
u
Q fide n
o n
C
Step_4: Save successfully.

TRACGL200MT002 - 46 -
GL200 Manage Tool User Guide

3.4. Load/Execute All Configuration

Step_1: Before execute all configurations, please load the configuration file or set all parameters
in commands. To load configuration file, please select “Read All Configuration” ” Load
Configurations From File”. And then select the configuration file you needed.

i n k
cl ia l
u e n t
Q fide
o n
C
Step_2: You can set the parameters in commands base on the configuration file, and then click
“Execute All Configuration” in toolbar.

Step_3: Manage Tool will write all commands to device.

TRACGL200MT002 - 47 -