Scribd
Upload
8 views

DSP- Unit-II Questions

Uploaded by

mmmsmaheshwaran
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
8 views

DSP- Unit-II Questions

Uploaded by

mmmsmaheshwaran
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Short Questions from Unit-II – Digital Signal Processing

1. What is meant by pre-warping?


2. Design a digital IIR filter for the following analog filter with the transfer function using
Impulse Invariance method and Bilinear Transfer Function Method. Assume that T=1
sec. – Sandhiya, Arulmathi, Vaishnavi
1 2 𝑠+1
1. 𝐻 (𝑠) = 𝑠+1 2. 𝐻 (𝑠) = (𝑠+1)(𝑠+2)
3. 𝐻 (𝑠) = (𝑠+1)2 +9
𝑏
4. 𝐻 (𝑠) =
((𝑠 + 𝑎)2 + 𝑏2 )
3. Compare Impulse Invariance method and Bilinear Transformation Method.
4. Express the relation between analog and digital frequency in the case of Impulse
Invariance method and Bilinear Transformation Technique.
5. Write down the steps involved in the design of digital filter using impulse invariance
method.
6. Write down the characteristics of Butterworth IIR filter.
7. Determine the transfer function of Butterworth type IIR filter for N=1, N=2,N=3. -
Praveen
8. Write down the procedure to design Digital Butterworth IIR filter from the
specifications of the filter.
9. Write down the characteristics of Chebyshev filter.
10. What are the requirements for the digital filter to be stable and causal.

16 Mark Questions:

11. Design a third order Butterworth filter using Impulse Invariance method. Assume that
Sampling period T=1 sec. - GOWRI
12. Design a digital Butterworth filter with a maximum passband attenuation of 2db at 20
rad/sec and at least –10 dB stop band attenuation at 30 rad/sec using Bilinear
transformation method. [consider only the positive sign of attenuation in dB given to find the order] -
NISHA
13. Using BLT design a HPF, monotonic in Pass band with cut off frequency of 1000Hz and
down 10dB at 350 Hz. The sampling frequency is 5000Hz. - ANBU
14. Using bilinear transformation, design a digital IIR filter with Butterworth characteristics
to meet the following specifications. - KAVYA
𝜋
0.707 ≤ |𝐻(𝜔| ≤ 1, 0 ≤ 𝜔 ≤
2
3𝜋
0 < |𝐻(𝜔| ≤ 0.2, ≤ 𝜔 ≤ 𝜋
4

You might also like