Scribd
Upload
20 views2 pages

mastertile 530

Uploaded by

antonyos.ec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views2 pages

mastertile 530

Uploaded by

antonyos.ec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MasterTile® 530

Coloured, latex modified grout for ceramic tiles

DESCRIPTION STORAGE
MasterTile 530 is a fine coloured powder which, when Store out of direct sunlight, clear of the ground on pallets
mixed with water, gives a smooth, easily applied creamy protected from rainfall. Avoid excessive compaction.
paste for clean grouting of ceramic tiles. It sets to a
decorative water resistant finish. SAFETY PRECAUTIONS
As with all chemical products, care should be taken during
ADVANTAGES use and storage to avoid contact with eyes, mouth, skin
• Water-resistant (suitable for swimming pools). and foodstuffs (which may also be tainted with vapour
• Available in a range of colours. until product is fully cured). Treat splashes to eyes and
skin immediately. If accidentally ingested, seek immediate
• Resistant to cracking in joints up to 4mm wide. medical attention. Reseal containers after use.
• Ideal for internal and exterior applications.
• Formulated for Middle East conditions.
NOTE
Field service, where provided, does not constitute
PACKAGING supervisory responsibility. For additional information
MasterTile 530 is available in 15kg sacks. contact your local Master Builders Solutions
representative. Master Builders Solutions reserves the
COMPOSITION right to have the true cause of any difficulty determined by
accepted test methods.
MasterTile 530 is a blend of hydrophobic cement, fillers
and organic additives.

STANDARDS
BS 5980 - Cementitious Adhesives and Grouts ANSI 118.7
(Polymer Modified Cement Grouts)

APPLICATION PROCEDURES
Allow at least 24 hours between fixing tiles and grouting.
Mix grout powder with water to give a smooth, thick
consistency.
Gauging water for 15 kg sack is approx. 3.9 - 4.3 ltr.
Leave to stand for 15 minutes before using. Apply to tile
joints with a squeegee, brush or sponge. Remove surplus
grout with a damp sponge. When grouting is completed,
polish tiles with a dry cloth.

WATCHPOINTS
Certain types of tile may stain when in contact with
coloured cement grouts, it is therefore advisable to
consult the tile manufacturer and carry out trials before
use.

COVERAGE
1 kg is sufficient for approximately 4 square metres using
standard 150 x 150mm tiles.

December 2020 Page 1 of 2


MasterTile® 530

QUALITY AND CARE


All products manufactured by Master Builders Solutions
Egypt, or imported from Master Builders Solutions affiliate
companies world- wide, are manufactured to procedures
certified to conform to the quality, environment, health &
safety management systems described in the ISO
9001:2015, ISO 14001:2015 & OHSAS 18001:2007
standards.

* Properties listed are based on laboratory controlled tests.

® Registered trademark of a MBCC Group member in


many countries of the world

Master_Builders_Solutions_CC-EG/Tile_530_09_12/v1/05_14

MBS Construction Chemicals Egypt (S.A.E), Business Park A, Building A1, Cairo Festival City, Ring Road, New Cairo, Egypt
Hotline: 15560, Phone: +202 2128 7800, Fax: +202 2128 7801
Website: https://www.master-builders-solutions.com/en-eg

December 2020 Page 2 of 2

You might also like