ZSP — ZENITH SURFACE PANEL

The Zenith Surface Panel (ZSP) provides the interface for communication with the down-
hole gauge. The ZSP is common to the Zenith E-Series, C-Series and R-Series downhole

Pi - 28/07/07 14:00:00
monitoring systems meaning only one type of data acquisition unit is required when Zenith
0.8

systems are installed. This simplifies maintenance and provides common communication
0.6

0.5

0.4

0.3

0.2

0.1

0.0

TIME
28/07/07
02:00:00
28/07/07
06:00:00
28/07/07
10:00:00
PARA M 1 2 H o u r s B A C K
28/07/07
14:00:00
NEXT
of data from well site to varying forms of data transmission devices such as SCADA.
FRAME

The panel contains a display and keypad for local information and can be connected to
surface drives to provide automated shut-down signals in addition to alarms protecting lift
systems and well integrity.

The flexible design of the panel allows mounting inside or outside of cabinet doors. Ad-
ditional analogue input and output cards can be added as required. When interfacing with
WWW.ZENITHOILFIELD.COM

the E-Series ESP monitoring systems a Zenith surface choke is required.

CONSTRUCTION
General Fits inside or outside switch board or VSD. IP65 enclosure.

Material Aluminium

Display 320 x 240 graphical touch-screen display and keypad

Dimensions 200 x 230 x 110 mm

Temperature Rating 75°C continual use

DATA GATHERING
Data Logging 4MB capacity (minimum 32,000 downhole records)
Smart Logging available if extended logging periods required
SD card option — simple data transfer to removable memory card

Engineers’ Port External engineers’ port for easy access

Data Transfer (SCADA) Modbus interface ready to interface to SCADA type systems

Analogue Inputs/Outputs 8 x 4-20mA

Modbus Port Included as standard RS232/485 1,200-38,400 Baud rates

Features Hand-held PDA or laptop PC connection to engineers’ port over ethernet

Communications Up to 38,400 Baud rate

Interface Standard 6 pin round rugged military connector

POWER REQUIREMENTS
Power Supply 85-264V AC

Frequency 50-60Hz +/- 10%

Nominal Power 30W

Fuse Rating 3 Amp

GAUGE FUNCTIONALITY
Output Gauge Supply 120 VDC current limited or 24 VDC current limited

Alarm & Trip Relay 250 VAC/DC 1A Volt Free SPCO activated by all readings

Analogue Inputs/Outputs 8 x 4-20 mA

ZENITH
 DESCRIPTION REF. No.
Zenith Surface Choke 14460052000

Installation Cable Kit 14460003000

FUNCTIONALITY
ALARM & TRIPS

AMBIENT TEMP.
HEATER - LOW
REMOVABLE
ANALOGUE
RS232/485

MEMORY
MODBUS
LOGGER

LOGGER
DISPLAY

IN/OUT
EVENT
DATA
DESCRIPTION REF. No.
ZSP for E-Series Gauges: 14460055102 a a a a a

14460055002 a a a a a a

14460104102 a a a a a a

14460104002 a a a a a a a

14460055302 a a a a a a

14460055202 a a a a a a a

14460104302 a a a a a a a

14460104202 a a a a a a a a

ZSP for C-Series & R-Series Gauges: 14460055105 a a a a a

14460055005 a a a a a a

14460104105 a a a a a a

14460104005 a a a a a a a

14460055305 a a a a a a

14460055205 a a a a a a a

14460104305 a a a a a a a

14460104205 a a a a a a a a

ZKG-0605-005_M — April 2008 — © Zenith — zenithoilfield.com