Scribd
Upload
6 views

_ Finite Element Methods

Biji

Uploaded by

Erla Mahendrakumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

_ Finite Element Methods

Biji

Uploaded by

Erla Mahendrakumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Finite Element Methods

1.define stiffness matrix

Ans:- stiffness matrix is symmetric matrix which is derived from the stiffness of hookes law .it
describes stiffness Between all degrees of freedom and it is denoted by K.

2.what is strain energy?.

Ans:- bending moment effect only contributes for internal strain energy.

3.Whay is an axisymmetric element?

Ans :- Many three dimensional solids subjected to axisymmetric loading are reduced to simple
two dimensional finite elements for analysis .thus,the two dimensional is called as axisymmetric
element.

4.what is ment by one- dimensional heat transfer?

Ans:- when the temperature and heat transfer in a system varies only in one direction, it is also
known as one- dimensional heat transfer.

5.what is consistent mass matrix model ?

Ans:- A consistent mass matrix is formed by using shape function same as that of stiffness
matrix. The term consistent implies that these models follow direct discritization of the finite
element.

6.______________solutions are obtained using finite element method.


Ans:- Approximate.

7.Hermite shape functions require_________ order slope.


Ans:- second

8.constant strain triangular element is also known as __________________


Ans:- 3-noded triangular elemens

9.Three modes of heat transfer are __________ , _______________ , _________________.


Ans:- conduction, convention, radiation.

10.________________ is the method of developed to analyse the dynamic of system.


Ans:- wilsons.

11.____________aproximation is made by FEM. [A]


A.piece-wise
B.pointwise
C.stair type
D.None

12.when viwed in local coordinate system the truss element is _____________. [B]
A.Two dimensional
B.one​ dimensional
C.Three dimensional
D.None

13.Degrees of freedom for CST element is _________. [d]


A.3
B.4
C.5
D.6

14.steady state problem does not depend upon ____________


A.Temperature
B.Time
C.Botha (A)and (B)
D.None

15. Eigen values differs for______ matrix. [A]


A.Transpose symmetric
B.Non- symmetric
C.symmetric
D.Hermitian.

You might also like