PFD-P250VM-E

PFD-P500VM-E
P U H Y- P 2 5 0 Y J M - A ( - B S )
P U H Y- P 5 0 0 Y S J M - A ( - B S )
P QH Y- P 2 5 0 Y H M - A

New publication effective Mar. 2011

Specifications subject to change without notice
 CLOSE CONTROL SYSTEM

MITSUBISHI ELECTRIC’s Close Control System (PFD series) is High Reliability

specifically designed for computer rooms, laboratories etc,
where strict control of humidity and temperature is a must.
PFD
Precise Room Temperature Control
It possesses “High Reliability”, “Energy Saving Technology”, and (Cooling) ON / OFF controlled air condditioner
PFD series maintain a nearly constant
“Easy Installation / Maintenance”.
room temperature (within ±1.0˚C) without
It can be connected to a computer network using our AG-150A

Suction air temp

the typical temperature changes that
controller, in order to monitor from a distance and provide remote occur with conventional ON/OFF control
email alarms. systems with inverter driven compressor.
Depending on the loading conditions

Time

Quick Recovery from Power Failure

After an initial setting of outdoor unit is completed within 20 seconds of power recovery, thermo ON
signal will turn on and it will take 5 seconds for an outdoor unit fan and compressor operation to start.
PFD unit will restart within 20 seconds+(indoor unit address/2). To prevent the inrush current when
recovering from power failure, the indoor unit system will restart one by one.

(example)

Power Thermo ON =
recovery Compressor ON

OUTDOOR Initial setting

UNIT Compressor in operation
Within 20 sec 5 sec

Ex. In case of indoor unit address 1

Oudoor unit recovery in 25 sec
Indoor unit recovery in 20.5 sec

Initial setting
Indoor unit in operation
INDOOR Within 20 sec + (indoor unit address /2)
UNIT
Indoor unit in operation
1 sec.
Indoor units start one by one every sec.

Protection of Confidential Information

As a compressor has been incorporated into the outdoor unit, the compressor can be serviced without
entering a computer room. Our close control system can protect confidential information.

NEW PFD System Rotation

One unit in a system will alternatively be in stand-by position as a back-up unit in case of malfunction.

PFD series provide you with highly reliable computer room cooling system
1 2
 CLOSE CONTROL SYSTEM

Energy Saving Technology Energy Saving Technology

Low Running Cost Minimum Humidifiers

The inverter driven compressors can maximize the energy efficiency of PFD series, PFD series work without a large capacity humidifier in most specifications. Due to the use of an
leading to reduction of power consumption. optimized inverter driven compressor, PFD series minimize the excessive dehumidification whereas
PFD series coefficient of performance (COP) are over 3.00 in cooling mode. other systems need a separate humidifier for each indoor unit.
[Sensible heat factor (SHF) : 0.93]

Low Power Consumption Saturation line Increase evaporation Saturation line

Absolute Humidity

Absolute Humidity
temperature by reducing
Plus, new PFD series adopt advanced R410A refrigeration and control technology to offer compressor speed.
lower power consumption.
wn Evaporation
l do
Coo Temperature Cool d
own

Humidification
Evaporation
Temperature
Inverter-driven capacity control Reheating

No large capacity
10HP Outdoor Unit 20HP Outdoor Unit Large capacity humidifier
humidifier needed!
needed! Temperature (DB) Temperature (DB)
100% 100%
Common Close Control Air Conditioner PFD Series
Compressor Capacity Control

Compressor Capacity Control

No.2
Compressor
Inverter Control

Inverter Control
No.1 This system will also help to minimize maintenance costs by removing the need for a large capacity humidifier.
Compressor No.1
Inverter Control Compressor
Inverter Control
34% 20%
Load Load
Large Small Large Small

PFD series operates highly efficiently with using

newly developed inverter compressor

Common Close Control Air Conditioner PFD Series

A humidifier can be incorporated inside of the units.

Consult our sales office in your area for more detailed
information.

PFD series will not have excessive dehumidification

3 4
 Easy Installation/Maintenance Unit Combination

Small Installation Space PFD + Air cooled outdoor unit

PFD series are specifically designed to minimize the size of the indoor units and save on
When connecting PFD-P500VM-E and P500 outdoor unit, either 1 or 2 refrigerant circuit connection
valuable computer room space.
is available depending on system size and usage. With 2 refrigerant circuit connection, one circuit can back
up the other.
Service Space (Indoor) If installation and large number of units are to be installed, single refrigerant circuit can be selected.

PFD-P250VM-E PFD-P500VM-E

200mm 500mm 200mm 500mm

1
1000mm or more
Indoor unit
800mm or more

Indoor unit
PFD-P250VM-E PUHY-P250YJM-A PFD-P500VM-E PUHY-P250YJM-A x 2 PFD-P500VM-E PUHY-P500YSJM-A

At factory shipment, this model of indoor unit is

designed and set to accommodate a single
refrigerant circuit.
Connection of two refrigerant circuits to the indoor
unit requires setting change and pipe work.

1. It is necessary for the removal of the panel beyond 600mm.

PFD + Water cooled outdoor unit

When connecting PFD-P500VM-E unit and water cooled outdoor unit, only 2 refrigerant circuit connection is
Piping length available and single refrigerant connection is not available.

With long pipe-runs of up to 165m, top-bottom differentials of 50m (40m if the outdoor unit is
installed below indoor unit, 15m if the outdoor temperature is under 10˚C), flexible design is
available with both air and water cooled outdoor unit.

PFD-P250VM-E PQHY-P250YHM-A PFD-P500VM-E PQHY-P250YHM-A x 2

Outdoor unit
Heat source unit Single refrigerant circuit connection is not available
with water-cooled unit.

Top-bottom differential Top-bottom differential

50m 50m

Furthest piping length Furthest piping length

165m 165m
Operation Zone
100
Indoor unit Indoor unit

Relative humidity (%)

80

60

Same length with two refrigerant circuit connection 40 Indoor Temperature:

12~24˚C (WB)
20
Outdoor Temperature:
-15~43˚C (DB)
21.5
15 20 25 30 35 40
Indoor Temperature: ˚C (DB)

PFD series will be able to satisfy various installation conditions

5 6
 OUTDOOR UNIT

AIR COOLED OUTDOOR UNIT WATER COOLED HEAT SOURCE UNIT

Outdoor Unit Heat source Unit

High-capacity reluctance DC motor driven compressor Cold climate capability

Total cooling
Motor efficiency greatly improved Because the system is water capacity (%)
100
+ cooled, the outdoor air temperature Water cooled
General air
Reduced suction refrigerant heating loss does not affect capacity. cooled air
95 conditioning
Futhermore, water cooling means system

no defrost operation is required,

First in Industry so rapid starting assures quick and
90

Japan Machinery Federation Outdoor air

Executive Award-winning continuous cooling in the hottest 15 20 25 30 35 temperature
(˚CDB)
conditions. * Example only.
Low Noise in All Directions
Expansion tank
(10HP)
Heat recovery Cooling tower * The water circuit
Pump is closed.
When used in combination with the
City Multi WR2 series, Heat recovery
between Heat Source Units is possible. Heat recovery
Daytime Nighttime
58dB 44dB Heating Heating Heating Cooling
Heat taken
Example of water cooled system diagram from water
Low Low Heat recovery
Noise Noise Measured in anechoic room
1m
Heat radiated
PFD
to water

Lossnay
Indoor Indoor Indoor Indoor
Measurement unit unit unit unit
1m

location
BC controller GL
Heat source unit
Heat
exchanger Auxiliary heat
source
Low noise mode can reduce sound level by sensing ambient temperature condition.
Pump
(This function is available in setting at site.)
Thermal
storage tank
* The water circuit
is closed.

PFD series are made in Japan under a stringent Water cooled PFD series offers reliability and
quality control system of Mitsubishi Electric. energy-saving that computer rooms require.

7 8
 Remote Controller

Embedded MA remote controller and display lamps on the PFD unit enables easy control
New Design New Functions
and operation.
Backlight Color liquid crystal display Controllable units/groups
Backlight makes it easy to see and control units. Controls up to 50 units/groups (including indoor units,
A B C E F One can identify whether a unit is ON or OFF from a LOSSNAY, DIDO/AI/PI controller)
distance. Up to 150 units can be controlled via expansion
No.1 No.2
Control in the night with no lights is possible. controller;PAC-YG50ECA (AG-150A software needs to be
Power Operating Check Failure Failure
upgraded)
A Power display lamp Touch panel
*With PFD-P250VM-E, there is B Operation display lamp
only one failure display. 9 inch wide, high-resolution Monitoring functions
C Check display lamp
D Normal / Local switch Touch panel enables operation of units by touching with Temperature/Humidity (using AI controller with WEB
E No.1 Failure display lamp index finger. browser) *1
Local
F No.2 Failure display lamp When object unit is touched, orange box appears around General equipment such as lights on LCD (using DIDO
TEST RUN
* When Local operation is available the unit icon indicating the unit selected. controller)
D TEMP. ON/OFF

FILTER

at maintenance, please set

Interlock function from AI controller, DIDO controller to
CHECK TEST

PAR-20MAA TIMER SET

Normal “Normal / Local” switch to “Local”.

PFD-P500VM-E Then “Check” lamp will be lit.
USB memory compatible indoor units and between DIDO units are available.
All measurement/initial setting CSV data extractable with AG-150A interlock with DIDO controller or free contact on
USB memory. an indoor unit available. *Ver. 2.30 or later
Can save and overwrite setting data.
Energy saving functions
Seasonal scheduling and automatic switch over *1
Yearly scheduling on LCD *1
*1 License required.
Centralized Controller

With a new colored touch panel, and continuation of all the conventional G-50A functions,
System structure
AG-150A visualizes its functions from basic control to advanced operations and bringing an
ultimate controller to reality. M-NET
Switching Hub

LAN
(100BASE-TX) M-NET

Remote
Monitoring PC AG -150A PUHY-P250YJM-A
Remote monitoring
Expansion Controller PAC-YG50ECA via a Web browser

Power supply unit PFD-P250VM-E

Dimensions: 250(W) x 217(H) x 97.2(D) mm (PAC-SC51KUA)
: 9-7/8(W) x 8-9/16(H) x 3-7/8(D) in.
Hub
Centralized controller AG-150A
PUHY-P500YSJM-A
With a connection of a Expansion Controller,
PFD-P500VM-E
Central Control PC
maximum of 150 units/groups can be connected (TG-2000A)
*Ver. 6.10 or later M-NET
to AG-150A. Hub

Option : Black surface cover AG-150A / GB-50A

Service company
PAC-YG71CBL /Sales office

VPN Modem Modem VPN Remote

Router Internet Router monitoring PC
Remote monitoring
Mobile phone via a Web browser
Note : Use a security device such as a VPN router when connecting the of service person
AG-150A/GB-50A to the Internet to prevent unauthorized access.

9 10
 Indoor Unit Indoor Unit

PFD-P250VM-E (down flow) PFD-P500VM-E (down flow)

Specification Specification

Model name PFD-P250VM-E Model name PFD-P500VM-E

Cooling Heating Cooling Heating
Capacity kW 28.0 31.5 Capacity kW 56.0 63.0
BTU/h 95,500 107,500 BTU/h 191,100 215,000
Sensible Heat Capacity kW 26.0 Sensible Heat Capacity kW 52.0
BTU/h 88,700 BTU/h 177,400
Power source 3N~380 / 400 / 415V (50Hz) , 400 / 415V (60Hz) Power source 3N~380 / 400 / 415V (50Hz) , 400 / 415V (60Hz)
Power input kW 2.50 Power input kW 5.00
Current A 5.3 / 5.0 / 4.9 Current A 9.5 / 9.0 / 8.7
Fan Type X Quantity Sirocco fan x 1 Fan Type X Quantity Sirocco fan x 2
Airflow rate m3/min 160 Airflow rate m3/min 320
Motor output kW 2.2 Motor output kW 4.4
Refrigerant R410A Refrigerant R410A
External finish Galvanized steel plate (with polyester coating) External finish Galvanized steel plate (with polyester coating)
<MUNSEL 2.9GY 8.6 / 0.3 (White) or similar> <MUNSEL 2.9GY 8.6 / 0.3 (White) or similar>
<MUNSEL 7.2GB 3.2 / 5.3 (Blue) or similar> <MUNSEL 7.2GB 3.2 / 5.3 (Blue) or similar>
External dimension (H) x (W) x (D) mm 1950 x 1380 x 780 External dimension (H) x (W) x (D) mm 1950 x 1980 x 780
Protection device Fan Thermal switch Protection device Fan Thermal switch
Refrigerant piping diameter Liquid / Gas ø 9.52 Brazed (ø12.7 for over 90m) / ø 22.2 Brazed Refrigerant piping diameter Liquid / Gas Single refrigerant circuit : ø 15.88 Brazed / ø 28.58 Brazed
Sound pressure level dB (A) 59 Two refrigerant circuits : ø 9.52 x 2 (ø12.7 x 2 for over 90m) Brazed / ø 22.2 x 2 Brazed
Net weight kg 380 Sound pressure level dB (A) 63
Operating temperature range Indoor 12 ~ 24˚C (54 ~ 75˚F) W.B. 15 ~ 28˚C (59 ~ 82˚F) D.B. Net weight kg 520
(Outdoor) (-15 ~ 43˚C (5 ~ 109˚F) D.B.) (-15 ~ 15.5˚C (5 ~ 60˚F) W.B.) Operating temperature range Indoor 12 ~ 24˚C (54 ~ 75˚F) W.B. 15 ~ 28˚C (59 ~ 82˚F) D.B.
(Water) (10 ~ 45˚C (50 ~ 113˚F) ) (10 ~ 45˚C (50 ~ 113˚F) ) (Outdoor) (-15 ~ 43˚C (5 ~ 109˚F) D.B.) (-15 ~ 15.5˚C (5 ~ 60˚F) W.B.)
(Water) (10 ~ 45˚C (50 ~ 113˚F) ) (10 ~ 45˚C (50 ~ 113˚F) )
Note: 1. Cooling / Heating capacity indicates the maximum value at operation under the following condition. Note: 1. Cooling / Heating capacity indicates the maximum value at operation under the following condition.
<Cooling> Indoor : 27˚C (81˚F) DB / 19˚C (66˚F) WB Outdoor : 35˚C (95˚F) DB (Air cooled) / Water temperature 30˚C (86˚F) (Water cooled) <Cooling> Indoor : 27˚C (81˚F) DB / 19˚C (66˚F) WB Outdoor : 35˚C (95˚F) DB (Air cooled) / Water temperature 30˚C (86˚F) (Water cooled)
<Heating> Indoor : 20˚C (68˚F) DB Outdoor : 7˚C (45˚F) DB / 6˚C (43˚F) WB (Air cooled)/ Water temperature 20˚C (68˚F) (Water cooled) <Heating> Indoor : 20˚C (68˚F) DB Outdoor : 7˚C (45˚F) DB / 6˚C (43˚F) WB (Air cooled)/ Water temperature 20˚C (68˚F) (Water cooled)
Pipe length : 7.5m Level difference: 0m Pipe length : 7.5m Level difference: 0m
2. The sound pressure level is measured in an anechoic room. 2. The sound pressure level is measured in an anechoic room.
3. Heating can be used only by the indoor warming-up. 3. Heating can be used only by the indoor warming-up.
4. Works not included : Installlation / foundation work, electric connection work, duct work, insulation work, 4. Works not included : Installlation / foundation work, electric connection work, duct work, insulation work,
The power source switch and other items are not specified in the specifications. The power source switch and other items are not specified in the specifications.
5. It is necessary to change pulley and v-belt when using it by the power supply frequency 60Hz. 5. It is necessary to change pulley and v-belt when using it by the power supply frequency 60Hz.
6. If units are operated for a long time at the relative humidity of 80% or more, condensate may collect and drip from the indoor units. 6. If units are operated for a long time at the relative humidity of 80% or more, condensate may collect and drip from the indoor units.
External Dimensions External Dimensions

Air inlet Air inlet

1950

1950
Air outlet
Air outlet
1380 780 1980 780

11 12
 Outdoor Unit Heat Source Unit
PUHY-P250, P500Y(S)JM-A (-BS) PQHY-P250YHM-A
(connected with PFD series.) (connected with PFD series.)

Specification Specification

Model name PUHY-P250YJM-A (-BS) PUHY-P500YSJM-A (-BS) Model name PQHY-P250YHM-A

Cooling Heating Cooling Heating Cooling Heating
Capacity kW 28.0 31.5 56.0 63.0 Capacity kW 28.0 31.5
BTU/h 95,500 107,500 191,100 215,000 BTU/h 95,500 107,500
Power source 3N~380 / 400 / 415V (50Hz / 60Hz) Power source 3N~380 / 400 / 415V (50Hz / 60Hz)
Power input kW 6.80 6.60 13.60 13.20 Power input kW 5.45 5.51
Current A 11.4 / 10.9 / 10.5 11.1 / 10.5 / 10.2 22.8 / 21.8 / 21.0 22.2 / 21.0 / 20.4 Current A 9.2 / 8.7 / 8.4 9.3 / 8.8 / 8.5
Fan Type X Quantity Propeller fan x 1 Propeller fan x 2 Compressor Type Inverter scroll hermetic compressor
Airflow rate m3/min 170 170 x 2 Motor output kW 6.3
Motor output kW 0.46 x 1 0.46 x 2 Heat exchanger Type plate
Refrigerant R410A Water volume in the plate 5.0
External finish Pre-coated galvanized steel sheets (+ powder coating for-BS type) Circulating water Volume m3/h 5.76
<MUNSEL 5Y8 / 1 or similar> cfm 3.4
External dimension (H) x (W) x (D) mm 1710 (without legs 1650) x 920 x 760 1710 (without legs 1650) x 920 x 760 1710 (without legs 1650) x 920 x 760 Pressure drop kPa 17
Protection device High pressure protection High pres. Sensor & High pres. Switch at 4.15 MPa (601psi) Refrigerant R410A
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection External finish Acrylic painted steel plate
Compressor Over-heat protection External dimension (H) x (W) x (D) mm 1160 (1100 without legs) x 880 x 550
Fan motor Thermal switch Protection device High pressure protection High pressure sensor, High pressure switch 4.15 MPa (601psi)
Refrigerant piping diamete Liquid / Gas ø 9.52 Brazed (ø 12.7 for over 90m) / ø 22.2 Brazed ø 15.88 Brazed / ø 28.58 Brazed Compressor Over-heat protection
Sound pressure level dB (A) 58 61 Inverter Over-heat protection, Over-current protection
Net weight kg 200 200 x 2 Refrigerant piping diameter Liquid / Gas ø 9.52 Brazed (ø 12.7 for over 90m) / ø 22.2 Brazed
Operating temperature range Outdoor -15 ~ 43˚C (5 ~ 109˚F) D.B. -15 ~15.5˚C (5 ~ 60˚F) W.B. -15 ~ 43˚C (5 ~ 109˚F) D.B. -15 ~15.5˚C (5 ~ 60˚F) W.B. Sound pressure level dB (A) 49
(Indoor) (12 ~24˚C (54 ~ 75˚F) W.B.) (15 ~ 28˚C (59 ~ 82˚F) D.B.) (12 ~24˚C (54 ~ 75˚F) W.B.) (15 ~ 28˚C (59 ~ 82˚F) D.B.) Net weight kg 195
Operating temperature range Water 10 ~ 45˚C (50 ~ 113˚F) 10 ~45˚C (50 ~ 113˚F)
(Indoor) (12 ~24˚C (54 ~ 75˚F) W.B.) (15 ~ 28˚C (59 ~ 82˚F) D.B.)
Note: 1. Cooling / Heating capacity indicates the maximum value at operation under the following condition. Note: 1. Cooling / Heating capacity indicates the maximum value at operation under the following condition.
<Cooling> Indoor : 27˚C (81˚F) DB / 19˚C (66˚F) WB Outdoor : 35˚C (95˚F) DB <Cooling> Indoor : 27˚C (81˚F) DB / 19˚C (66˚F) WB Water temperature : 30˚C (86˚F)
<Heating> Indoor : 20˚C (68˚F) DB Outdoor : 7˚C (45˚F) DB / 6˚C (43˚F) WB <Heating> Indoor : 20˚C (68˚F) DB Water temperature : 20˚C (68˚F)
Pipe length : 7.5m Level difference: 0m Pipe length : 7.5m Level difference : 0m
2. The sound pressure level is measured in an anechoic room. 2.The ambient temperature of the heat source unit needs to be kept below 40˚C (104˚F) DB.
3. Heating can be used only by the indoor warming-up. 3.The ambient relative humidity of the heat source unit needs to be kept below 80%.
4. Works not included : Installlation / foundation work, electric connection work, duct work, insulation work, 4.The heat source Unit should not be installed at outdoor.
The power source switch and other items are not specified in the specifications. 5.Be sure to mount a strainer (more than 50 meshes) at the water inlet piping of the unit.
6.Be sure to provide interlocking for the unit operation and water circuit.
7. It is measured in anechoic room.
External Dimensions External Dimensions
PUHY-P250YJM-A PUHY-P500YSJM-A
760

550
920
Discharge air 760 920 30 920
Top view 880
Discharge air Outdoor unit 1 Outdoor unit 2
240

Intake Intake
Intake air air
air
1650
1710

1650
1410

1710

1160
Intake Intake
Intake air
air air

760 550
Left view
Left side view Front view Front view Right side view Rear view
(Mounting pitch)
724(721 727)

(550)
760

(880)
80 760 80
(Mounting pitch)
Bottom view

13 14
 PFD-P250VM-E
PFD-P500VM-E
P U H Y- P 2 5 0 Y J M - A ( - B S )
P U H Y- P 5 0 0 Y S J M - A ( - B S )
P QH Y- P 2 5 0 Y H M - A

New publication effective Mar. 2011

Specifications subject to change without notice