People, Capabilities and Systems to

Save Money and Increase Productivity

Industry Leader
Continually satisfying our customers Industrial
with the world’s best lubrication
Solutions
equipment and pumping systems
has made Lincoln the largest and
most successful company in our
field. For more than 90 years,
companies have relied on our
technical and quality leadership;
our world-class manufacturing
and customer service and our
vast network of distributors and
support facilities.

Research and
Development
In order to provide the best world-
wide and regional application
solutions, Lincoln develops new
products and systems at research
and development facilities in the
United States, Germany and India.

Providing Solutions
Industrial customers in large processing Quality
plants, automotive manufacturing, pulp Manufacturing
and paper mills, food and beverage and
other manufacturing facilities can depend
on solutions from Lincoln. For the toughest
mobile applications, on the road or in the
field, Lincoln protects heavy equipment
used in mining, construction, agriculture Customer Service
and over-the-road trucking. In addition,
Lincoln offers the best lubrication
equipment to meet the needs of
automotive service professionals.
Worldwide Support
Complete Product Line
Lincoln supplies automated
lubrication systems, pumps and
pump stations and top quality Research &
lubrication equipment and acces- Development
sories. Our quality systems in the
United States and Germany are
ISO 9001 registered and our fittings
business is QS 9000 registered.

Worldwide Support
With five technical support centers
on three continents, and a network
of distributors supported by regional
sales and service offices, our
customers can always draw on
our worldwide resources. Mobile Equipment
Industrial Pumping Equipment
Table of Contents

Introduction to Industrial Pumping . . . . . . . . . . . . . . . . . . . . . . . 2

PowerMaster® III
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pump Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Optional Kits for Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Elevators and Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Primer, Pressure Primer and Air Motor Accessories . . . . . . 11
PileDriver® III
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Pump Selection Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Pressure Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Mounting Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Hydro-PowerMaster™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Magna-Ram™ Four-Post Pressure Primer . . . . . . . . . . . . . . . . 20
System Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Ejectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Measuring Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Diaphragm Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Diaphragm Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Transfer Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Other Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Pump Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

1
Industrial Pumping Equipment
Introduction

Lincoln provides the technologically advanced pumps required for today’s

demanding applications because we can draw on more than 60 years
experience with industrial pumping systems.
Our pumps excel in applications that range from the transfer of lighter fluids
(oils, solvents, adhesives, etc.) to the movement of medium-viscosity materials
(RTV silicone, greases, coatings, plastisols, offset inks, etc.) to the tough job of
pumping very heavy-viscosity materials (ink flushes, epoxies, mastics, etc.).
Our systems are found in diverse industries, including printing and publishing,
automotive manufacturing, rotational molding and other demanding industries
that require time-proven systems for application of their materials in manufacturing.
PowerMaster® III Pumps
Building upon our success with standard drum pumps, we have taken their design
into the 21st century with completely pneumatic, modular air motors and six-inch
stroke pumps for greater material output. Accessories include an AirBrake™ option
for prevention of pump runaway due to an empty container, a broken supply line
or other loss of pump prime. A variety of packing materials ensures correct packing
based on material compatibility.
PileDriver® III Pumps
For high-volume applications of viscous materials from standard drums or bulk
tanks, these industry-standard pumps incorporate the same completely pneumatic,
modular air motors. Along with the AirBrake option and a wide variety of packing
materials, PileDriver III pumps feature a patented leakless gland design that protects
the pump from gland seal failure and subsequent downtime for replacement.
We have a wide range of system accessories, from pressure primers and other
mounting accessories to material control valves, ejectors, measuring valves, air
controls and system hardware.
Selection of system accessories is based on general system type and your particular
system’s needs. Our network of systems house distributors is ready to help design
the industrial pumping system that is right for you. Contact the Lincoln Technical
Service Department (314-679-4200, ext. 4782) for the name of your nearest systems
house distributor.

2
Industrial Pumping Equipment
Introduction

Transfer System
Material is transferred from its original
container to another point. Typically, the
simple transfer of low-viscosity fluids through
relatively short supply lines requires low
pressure, high-volume pumps. If higher
viscosity fluids are involved, or longer supply
lines are required, a pump capable of higher
pressures becomes necessary. Transfer
systems transfer:
• Printing inks to press fountains.
• Adhesives to reservoirs on
packaging machinery.
• Lubricants to smaller containers in
remote locations.
• Materials to high-pressure pumps for
spray or flow applications.

Measure System
Material is pumped from original containers
through the supply lines to measuring valves
or ejectors, which in turn meter precise
amounts of material to a work piece.
Typical measure systems include:
• Multiple shots in patterns of adhesives
used to bond substrates, such as
automobile hoods and doors.
• Measured lubricant applied to electric
motors in appliance manufacturing.
• Single-shot applications of adhesives
or sealants used in manufacturing.
• Cartridge filling lines.

Flow System
Material is pumped from the original
container through the supply line to a flow
gun which applies the material to a work
piece. Typical flow systems include:
• Adhesives applied to substrates for
bonding in construction and other
industries.
• Adhesives used in the manufacture of
modular or mobile homes.
• Sealants applied during manufacturing
to various parts of vehicles, including
sun shields, tail lights, weld lines and
hem flanges.
• Recommended for use where normal pump
operation does not exceed 45 cycles per minute.

3
Industrial Pumping Equipment
PowerMaster® III

Features
• State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches
(76, 101, 152, 203 mm) diameter.
• Full six-inch stroke for greater output per cycle.
• Modular design for easy repair.
• Only five moving parts, no metal-to-metal contact.
• Newly designed pump tubes offer ratios and outputs to fit any application.
• Available to fit any drum or pail size.
• Offered in carbon steel, stainless steel or hard-chrome plated.
• Complete selection of packing materials available.
• Full line of priming equipment and mounting devices.
• Ball-style for fluid materials. Shovel foot-style for high-viscosity,
non-fluid materials.

Series III Air Motors

• Full pneumatic operation for longer life and durability—only five moving parts.
• Total modular design for ease of service and maintenance.
• Quiet operation—meets or exceeds OSHA requirements at all recommended
operation air pressures.
• Interchangeable with all PowerMaster® III pump tubes.
• Acceptability of pump monitors and controls.

AirBrake™
• Shuts down pump immediately when excessive pump cycle speed
(runaway) occurs.
• Prevents pump damage due to a runaway condition.
• Indicates system fault caused by empty container or broken supply line.
• Limits spills due to pump outlet hose failure.
• Sends fault signal to remote alarm locations with optional 244398 signal kit.
• Tamper-proof knob (part number 273835)
• Can be ordered already installed (refer to Pump Specification Chart).
• Can be added later. Order model 85317.
• Easy to install and set—graduated dial with detents.
• Kit 273429 upgrades existing AirBrake-equipped pumps to the
latest specifications
• Recommended for use where normal pump operation does not exceed
45 cycles per minute.

See Pump Selection Chart in this section.

4
Industrial Pumping Equipment
PowerMaster® III

Pump Tubes—Ball Foot Design

• For light- to medium-viscosity, fluid materials.
• Available in three styles: stub length for bulk mounting, 55-gallon or
16-gallon drum size.
• Complete packing selection for total chemical compatibility.
• Ratios from 6:1–42:1, outputs to 3.9 gpm (14.6 lit/min.).
• Complete interchangeability with all Series III air motors.
• Exclusive, patented, “leakless” gland assembly kit is available as an accessory.

Model 84985 Pump Tubes—Shovel Foot Design, Plunger and

Bushing Style
• For medium- to high-viscosity, non-fluid materials.
• Available in 55-gallon or 16-gallon drum lengths, or mounts on pressure primer
for very high-viscosity materials.
• Full range of ratios: 12:1 through 84:1 for all applications.
• Selected fit, hardened steel plunger and bushing is particularly well suited to
viscous lubricants.
• No washers, o-rings or packings to replace on pump piston for ease
of maintenance.
• Shovel foot adds mechanical priming to normal suction, assures positive prime
with the most viscous of lubricants.
• Complete interchangeability with all Series III air motors.
• Exclusive patented, leakless gland assembly kit (to protect gland seal—the only
seal in pump tube) is available as an accessory.

Model 84991

Pump Tubes—Shovel Foot Design,

Packed Piston-Style
• Furnished with exclusive, patented, leakless gland assembly.
• For medium- to high-viscosity, non-fluid materials.
• Available in 55-gallon or 16-gallon drum lengths; also suitable for mounting on
priming equipment or standpipe mounting for bulk delivery.
• Full range of packing materials available for product compatibility.
• Complete interchangeability with all Series III air motors.
• Full range of ratios: 10:1 through 80:1.
• Specifically designed to enhance growing market for dispensing industrial-type
materials: sealants, adhesives, urethanes, inks, etc.

Model 84976 See Pump Selection Chart in this section.

5
Industrial Pumping Equipment
PowerMaster® III Pump Selection Chart

Low- to Medium-Viscosity Pumps—Carbon Steel for Transfer of Non-Corrosive Materials

Ball Pumps
Pump Model Pump Pump Material Output Approximate
Diameter
Ratio Std. Air Tube Air Motor Model Tube Outlet per cycle Cycles per
in. / mm
Motor Only Style Model N.P.T.F. cu. in / cc gal / liters
24:1 2021 Std. 84806 w/ AirBrake *94906 6 / 152
55 gal 84985
2001
12:1 Std. 84804 w/ AirBrake *94904 4¼ / 108
2014 Stub 84986 ¾" 11.9 / 195 20 / 5
2052 55 gal 84985
6:1 Std. 84803 3 / 76
2051 Stub 84986

Shovel Foot Pumps—Packed Piston

4:1 *2076 16 gal 84979 4.6 / 75 51 / 13
Std. 84804 w/ AirBrake *94904 4¼ / 108
2.5:1 *2075 16 gal 84977 ¾"
6.7 / 110 35 / 9
2.5:1 *2066 55 gal Std. 84803 3 / 76 84976

Shovel Foot Pumps—Plunger and Bushing

80:1 2023 55 gal Std. 84806 w/ AirBrake *94906 6 / 152 84993 3.7 / 61 63 / 16
2004 55 gal 84997
75:1 2.1 / 34 111 / 29
2008 16 gal 84998
¾"
2010 55 gal Std. 84804 w/ AirBrake *94904 4¼ / 108 84995
50:1 3.0 / 49 78 / 20
2011 16 gal 84996
24:1 2002 55 gal 84991 6.1 / 100 38 / 10
* Order pump tube and air motor separately for these models or when ordering AirBrake™ equipped models.

Other PowerMaster Air Motor/Pump Tube Combinations (all feature ¾" NPTF Material Outlet)
Carbon Steel Ball-Type Carbon Steel Shovel-Type
Pump
Air Motor
Pump Max. GPM/LPM Plunger & Bushing
Ratio Tube Tube Free Delivery
Model Max. GPM/
Style Model 70 CPM Pump Pump
55 gal 84985 Air Motor LPM Free
Std. 84808 w/ Ratio Tube Tube
42 16 gal 84984 Model Delivery 70
AirBrake *94908 Style Model
Stub 84986 CPM
16 gal 84984 55 gal Std. 84808 84991
Std. 84806 w/ 84:1 w/ AirBrake 2.0/7.5
24:1 16 gal 84992
Stub AirBrake *94906 84986 3.9 / 14.6 *94908
80:1 16 gal Std. 84806 84994 1.2/4.5
std.84804 W/Air
12:1 16 gal 84984 55 gal w/ AirBrake 84991
Brake*94904 48:1 2.0/7.5
16 gal *94806 84992
55 gal 84985
6:1 Std. 84803 Std. 848064
Stub 84986
55 gal w/ AirBrake 84993
Carbon Steel Shovel-Type Packed Piston 40:1
*94904
1.2/4.5
16 gal Std. 84804 84994
Pump Max. GPM/LPM w/ AirBrake
Air Motor Pump Tube 24:1 16 gal 84992 2.0/7.5
Ratio: Tube Free Delivery *94904
Model Model
Style 70 CPM 55 gal 84997
55 gal Std. 84808 w/ 84976 36:1 0.7/2.6
80:1 2.2 / 8.2 16 gal 84998
16 gal AirBrake *94908 84977 55 gal 84995
55 gal 84978 24:1 1.0/3.7
64:1 1.5 / 5.7 16 gal 84996
16 gal Std. 84806 w/ 84979 Std. 84803
55 gal 84993
55 gal AirBrake *94906 84976 20:1 1.2/4.5
44:1 2.2 / 8.2 16 gal 84994
16 gal 84977 55 gal 84991
32:1 55 gal Std. 84804 w/ 84978 1.5 / 5.7 12:1 2.0/7.5
16 gal 84992
22:1 55 gal AirBrake *94904 84976 2.2 / 8.2
* Order pump tube and air motor separately.
55 gal 84978
15:1 1.5 / 5.7
16 gal Std. 84803 84979
10:1 16 gal 84977 2.2 / 8.2

6
Industrial Pumping Equipment
PowerMaster® III Pump Selection Chart

Ball Pumps
Gallons / Liters Per Minute Min. ID Air Air Consumption Per Cycle
Supply Hose S.C.F.M. @ M³/Min. @ S.C.F.M. @ M³/Min. @
30 CPM 50 CPM 70 CPM in. / mm 70 psig 4.8 bar 100 psig 6.8 bar
1.1 0.031 1.6 0.045
¹⁄₂" / 12
0.8 0.023 1.1 0.031
1.5 / 5.8 2.6 / 9.7 3.9 / 14.6

⅜" / 10 0.5 0.014 0.7 0.02

Shovel Foot Pumps—Packed Piston

0.6 / 2.3 0.9 / 3.3 1.5 / 5.7
½" / 12 0.8 0.023 1.1 0.031
0.9 / 3.3 1.5 / 5.5 2.2 / 8.2
0.9 / 3.3 1.5 / 5.5 2.2 / 8.2 ⅜" / 10 0.5 0.014 0.7 0.02

Shovel Foot Pumps—Plunger and Bushing

0.5 / 1.8 0.8 / 3.0 1.2 / 4.5 1.1 0.031 1.6 0.045

0.3 / 1.0 0.5 / 1.7 0.7 / 2.6

½" / 12
0.8 0.023 1.1 0.031
0.4 / 1.5 0.6 / 2.5 1.0 / 3.7

0.8 / 3.0 1.3 / 5.0 2.0 / 7.5

Note: Air motors and pump tubes shipped separately. Assembly required.
Other PowerMaster Air Motor/Pump Tube Combinations (all feature ¾" NPTF Material Outlet)
Hardened Steel Ball-Type
Ratio Pump Tube Style Air Motor Model Pump Tube Model Max. GPM/LPM Free Delivery 70 CPM
42:1 84808 w/ AirBrake *94908
24:1 84806 w/ AirBrake *94906
55 gal 84983 3.9 / 14.6
12:1 84804 w/ AirBrake *94904
6:1 84803

Chrome Plated Ball-Type

Ratio Pump Tube Style Air Motor Model Pump Tube Model Max. GPM/LPM Free Delivery 70 CPM
42:1 84808 w/ AirBrake *94908
24:1 84806 w/ AirBrake *94906
55 gal 84982 3.9 / 14.6
12:1 84804 w/ AirBrake *94904
6:1 84803

Stainless Steel Ball-Type

Ratio Pump Tube Style Air Motor Model Pump Tube Model Max. GPM/LPM Free Delivery 70 CPM
55 gal Std. 84808 w/ AirBrake 84981
42:1
Stub *94908 84987
55 gal Std. 84806 w/ AirBrake 84981
24:1
Stub *94806 84987
3.9/14.6
55 gal Std. 84804 w/ AirBrake 84981
12:1
Stub *94804 84987
55 gal 84981
6:1 84803
Stub 84987

7
Industrial Pumping Equipment
Optional Kits for PowerMaster® III Pumps

Patented* Leakless Gland Assembly

The gland seal of all reciprocating positive displacement pumps is its weakest
point and is the single most common cause of pump failure, lost downtime and
maintenance expense. Lincoln’s new gland design uniquely addresses the
causes for premature gland seal failure.
A special protective bushing (or sleeve) with concentric grooves creates a labyrinth
path to reduce the internal operational pressure as well as the pressure fluctuations
developed during pump stroke changeover.
Leakless gland assembly is standard with packed piston pumps and is available for
all PowerMaster III pumps as an accessory.
* U.S. Patent No. 4,976,192

Gland Protection Sleeves

Order Model For Pump Tubes
86214 All Ball Foot Design Pump Tubes
86215 84997 & 84998
86216 84993 & 84994
86217 84995 & 84996
86218 84991 & 84992

Model 86214

Model 86213 Lube Cup Kit

For all PowerMaster® III pump tubes. Used in conjunction with the gland protection
sleeve to prolong service life of gland packing. Prevents material from drying out
on plunger.

Packing Kits for PowerMaster® III Pump Tubes

Lincoln offers alternate packing kits of Teflon® for some PowerMaster III pump tubes
because many materials used in today’s manufacturing environment may not be
compatible with the standard seals. Please consult Lincoln for compatibility of the
Model 86213 material to be dispensed with standard packings or alternate packing kits.
Teflon® is a registered trade mark of the Dupont Company.

Pump Tube Teflon® Kit

84982
84984
84985 84502
84986
84987

Model 84502

8
Industrial Pumping Equipment
PowerMaster® III Pump Accessories

Drum Covers
Model 81412
Standard 55-gallon drum cover for mounting PowerMaster III series drum pumps on
Model 81412 full, open drums.

Model 83166
Model 83166 Special 55-gallon drum cover for mounting PowerMaster III series drum pumps on
full, open drums. Includes port for installation of material agitator.

Model 81538 Model 81538

Standard 16-gallon drum cover for mounting PowerMaster III series drum pumps on
full, open drums.

Follower Plates
Model 83369
For 400-pound drums.

Model 84780
Model 83369 Model 83132

For 120-pound drums.

Model 83132 Bung Bushing

This 55-gallon drum bung bushing screws into the bung opening of the drum to
secure any Lincoln PowerMaster III pump.

Model 84963 Model 84826

Model 84963 Flange Mounting Assembly
Used for rigid mounting of PowerMaster III pumps to the top of fabricated bulk tanks.

Model 84826 Wall Mount Bracket Kit

For PowerMaster III air motor assemblies.

Model 84945 Suction Kit

Model 84945 Used with PowerMaster III stub pumps for convenient transfer of petroleum products
from drums, bulk tanks or reservoirs. Includes bung bushing suction tube, hose and
coupling assembly and other hardware.
Note: 2"x1" bell reducer required—not included.

Model 16177
Model 16177 Foot Valve Adapter
Converts inlet of models 84984 and 84985 Ball-Type PowerMaster III pumps to 1½"
NPTF female thread for attaching extension pipe.

Drum Dollies
Model 84377
55-gallon (400 lbs) band-type drum dolly with four swivel casters and screw clamps.

Model 84192
Model 84377 16-gallon (120 lbs) band-type drum dolly with four swivel casters and screw clamps.

Model 83727 Standpipe/Model 83732 Adapter Kit

Use of model 83732 adapter & bracket kit will enable PowerMaster III pumps to be
assembled to model 83727 stand pipe for pumping from bulk tanks. Inlet 3" NPT
female.

Model 83727

9
Industrial Pumping Equipment
Elevator & Primers for PowerMaster® III Pumps

Elevator, Primer and Pressure Primers

Lincoln’s mounting accessories include an elevator (Model 1709) to facilitate drum
change-over by lifting the pump from an empty drum and lowering it into a new drum
with minimum effort. Primers and pressure primers are available for positive priming
of viscous materials which are forced into the pump inlet by the downward force of the
follower. Models are available for most applications from 5-gallon pails to 55-gallon
drums. Models include followers with O-ring seals single O-rings for 5-gallon pail units
and double O-rings for 55-gallon drum units) which seal the container of material from
outside contamination and drying while wiping the container’s sides clean.
Pressure primers include a four-way valve which permits the air supply to be coupled
to the unit at all times. Use of an air regulator and gauge is recommended. In order to
prevent damage to pumps caused by operating after a drum is empty,a low-level air
cut-off assembly is recommended.

Priming
For Operating Pressures Height Base
Model 1709 Model 2716 Drum Air PSI / Bar Dim.
Model Description
Size Pressure in. /
Gal. psi / bar @70 @100 Lowered Raised mm
4.9 7 in. / cm in. / cm
NA
Beam
Single Post 50-200 / 112 / Length
1709 55 73 / 185.4
Elevator 3-14 284.5 19 / .5
360°
Rotation
Single Post
Pump Hoist NA NA
& Follower
12½ x 14
for low- to
40-200 / 110½ / 317.5
2716 55 med.-viscosity 73 / 185.4
3-14 280.7 x
materials
355.5
100K to 200K
centipoise
range
22¹⁄₄ x
Single Post 30-150 / 4.4 6.3 50½ / 22¹⁄₄
1701 ** 5
for viscous 3-10 .3 .44
42½ / 108
128 600 x
Model 1701 Model 1701 material 600
over 500K 26 x 26
centipoise 40-100 / 5 7.1 89 /
1704 55 89 / 226 700 x
3-7 .35 .5 226
700
Twin Post
for viscous
24 x 36
materials in the 40-150 / 2.7 3.7 66⅛ / 103 /
1736 55 600 x
200K to 500K 3-10 .2 .26 167.6 261.6
1000
centipoise
range

Notes:
**Model 83943 portability kit is available for Model 1701. Includes axle and wheels.
For pressure primers for 120 lb. drum pumps or for follower rings of materials other than standard
Buna-N, contact Lincoln Technical Services.
Note:
Pumps not included with pressure primers.

Model 1736

10
Industrial Pumping Equipment
Primer, Pressure Primer & Air Motor Accessories

Low-Level Air Cut-Off Assembly

Model 83811
For use with Model 1704 pressure primer. Mounts directly to elevator support.
Automatically shuts off air flow to pump when drum of material is emptied. Eliminates
unnecessary parts wear caused by continuous pump action when drum is empty.
Inlet ¾" N.P.T.(F).

Model 83970
Same as Model 83811, except for use with Model 2716.

Model 84143
Same as Model 83811 except for use with Model 1736.

Chimeless Drum Kits

Because some materials are supplied in straight-sided or chimeless drums, Lincoln
has developed hold-down kits which facilitate follower and pump extraction from
these drums. Kits are available as follows:
Kit No. For model PowerMaster® III
84167 1704
Model 84167 84503 1736

Airline Kits for Primer and Pressure Primers

Model 84144
Includes filter-lubricator-regulator, bracket and fittings to adapt air accessories to
Models 2716, 1736 and 1704. Includes ½" controls.

Model 84141
Same as Model 84144, except includes ¾" controls.

Model 85387-8
Included in 84144 Kit
Model 84722 Series III Air Motor Exhaust Adapter
Replaces standard muffler. Converts exhaust port to ¾" NPT female thread.

Model 66764 Muffler with ¾" NPT Male Thread

Fits on Model 84722.

Model 84723 Series III Air Motor Cover Panel Kit

Metal cover fits over tie rods. Encloses moving plunger rod.

Model 84722

Model 84723

11
Industrial Pumping Equipment
PileDriver® III

Series III Air Motor Features

• These fully pneumatic air motors reverse stroke direction without mechanical
linkages and are simpler and more reliable than older designs.
• Air motors are 3, 4, 6, 8 and 10 inches (76, 101, 152, 203 and 254 mm) diameter.
• An air signal valve activates a relay valve at the end of each stroke.
• The shifting relay valve changes the power valve position.
• The power valve shifts air flow to the opposite side of the power piston to reverse
stroke direction.
• Modular Construction: Air motors are easy to install, maintain and upgrade with
options like AirBrake™.
• Built-in Muffler: Meets or exceeds OSHA requirements at recommended
air pressures.
• AirBrake Options: Stops runaway pump, prevents product spills, damage and
excess wear and activates an optional remote alarm device. AirBrake available
already installed (refer to pump specification charts) or can be ordered separately
as Model 85317. For remote monitoring of AirBrake, order Model 244398 signal kit.

12
Industrial Pumping Equipment
PileDriver® III

PileDriver Series III Pump Tube Features

• Machined inlet casting: Set screws secure the inlet assembly and permit 360°
outlet adjustment to facilitate system plumbing and provide for easy pump
removal/replacement.
• Cartridge-type gland with scrapers and patented protection bushing: Extends
the life of gland packings by protecting them from excessive material build up
and pressure fluctuations. Cartridge removes easily for routine service.
• Straight-through pump tube and piston-port design: Reduces internal friction
and the opportunity for solids entrapment.
• Load-bearing, chrome-plated internal pump tube surface: Distributes forces
between gland and pump tube to prolong seal life.
• Choice of inlets: Shovel-type for thick material or flat check for higher flow rates.
* Air motor available separately.

*Model 84921 Model 84904

13
Industrial Pumping Equipment
PileDriver® III Pump Selection Chart

Pump Output Per Cycle

Air Motor Pump Pump Approximate Stroke
Model Std.
Ratio Model & Dia. Tube Tube Cycles per Length
Air Motor cu. in. cc
in. / mm Model Style gal / liters in. / cm
Only
75:1 2375 84902 12 196 20 / 5
Std. 86810 Shovel
42:1 2342 84900 22 360 11 / 3
w/ AirBrake 94910
2320 10 / 254 84921 44 721
20:1 5/1
2321 84922 Flat Check 46 754
45:1 2322 84902 12 196 20 / 5
35:1 2323 84901 17 278 14 / 4
Std. 84808 Shovel
25:1 2325 w/ AirBrake *94908 84900 22 360 11 / 3
13:1 2326 8 / 203 84921 44 721 5/1

6:1 2328 84923 Flat Check 85 1393 3/½ 6 / 152

25:1 2349 84902 12 196 20 / 5

20:1 2350 84901 17 278 14 / 4
Std. 84806 Shovel
15:1 2352 w/ AirBrake *94906 84900 22 360 11 / 3
7:1 2353 6 / 152 84921 44 721 5/1

3:1 2356 84923 Flat Check 85 1393 3/½

7:1 * 2367 Std. 84804 w/ AirBrake *94904 84900

Shovel
22 360 11 / 3
3:1 * 2368 41⁄4 / 108 84921 44 721 5/1
* Order pump tube and air motor separately when selecting 3" and 4" air motors and AirBrake-equipped models.

Packing Kit Selection Chart

Pump
Standard Polyurethane Kit Teflon® Kit UHMW Polyethylene Kit
Tube
84900 84907 84912 84913
84901 84911 84905 84906
84902 84908 84914 84915
84904 84909 — 84917
Model 84913 84921 84927 84928 84929
84922 84930 84931
—
84923 84924 84925
Note: Standard polyurethane seal kits include all soft seals. Teflon® and UHMW polyethylene seal kits
include gland and piston u-cups only.

Gland Seal Kits

Pump
Standard Polyurethane Kit Teflon® Kit UHMW Polyethylene Kit
Tube
84900 -- 85321 85327
84901 -- -- --
84902 -- 85323 --
84904 85314 85324 --
84921 85315 85325 --
Model 85311
84922 85315 85325 --
84923 85326 --
Note: Gland seal kits include gland u-cup and o-ring only.

14
Industrial Pumping Equipment
PileDriver® III Pump Selection Chart

Approximate
Pump Output GPM / LIT/Min. Max. Min. ID Air Consumption per Cycle
Outlet Air Supply Material
Air Inlet Press. Hose Outlet SCFM @ 70 psig SCFM @ 100
@ 30 cpm** @ 50 cpm** @ 75 cpm** psi / bar in. / mm psig M³/Min
M³/Min @ 4.8 bar @ 6.8 bar
1.5 / 5.9 2.6 / 9.8 3.9 / 14.9 7500 / 517
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 4200 / 290
2.5 / 0.071 3.6 / 0.10
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0
2000 / 138
5.8 / 22.6 9.9 / 37.7 14.9 / 56.5
1.5 / 5.9 2.6 / 9.8 3.9 / 14.9 4500 /310
2.2 / 8.3 3.7 / 13.9 5.5 / 20.8 3500 / 241
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 2500 / 172
1.9 / 0.054 2.6 / 0.074
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 1300 / 90 ³⁄₄ / 20
³⁄₄ NPT 1½ NPT
Female 11.0 / 41.7 18.4 / 69.6 27.6 / 104.5 600 / 41 Female

1.5 / 5.9 2.6 / 9.8 3.9 / 14.9 2500 /172

2.2 / 8.3 3.7 / 13.9 5.5 / 20.8 2000 / 138
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 1500 / 104
1.1 / 0.031 1.6 / 0.045
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 700 / 48

11.0 / 41.7 18.4 / 69.6 27.6 / 104.5 300 / 21

2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 1400 / 97 ½ / 12 0.8 / 0.023

1.1/ 0.031
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 600 / 41 ⅜ / 10 0.5 / 0.014

Note: Air motors and pump tubes shipped separately. Assembly required.
** Cycles per minute.

Other PileDriver Pump Tube/PowerMaster Air Motor Combinations

Air Motor Model & Dia. Max. GPM / LPM Free Max. Outlet Press.
Ratio Pump Tube Model Pump Tube Style
in. / mm Delivery @ 75 cpm psi / bar
55:1 84901 Shovel 5.5 / 20.8 5500 / 379
Std. 86810
45:1 w/ AirBrake *94910 84904 5.8 / 22.0 4500 / 311
10 / 254
10:1 84923 27.6 / 104.5 1000 / 69
30:1 Std. 84808 84904 5.8 / 22.0 3000 / 207
w/ AirBrake *94908 Flat Check
13:1 8 /203 84922 14.9 / 56.5 1300 / 90

18:1 Std. 84806 84904 5.8 / 22.0 1800 / 124

w/ AirBrake *94906
7:1 6 / 152 84922 14.9 / 56.5 700 / 48

12:1 84902 3.9 / 14.9 2400 / 166

Shovel
10:1 84901 5.5 / 20.8 2000 / 138
Std. 84804
8:1 w/ AirBrake *94904 84904 5.8 / 22.0 1600 / 110
4¼ / 108
3:1 84922 Flat Check 14.9 / 56.5 600 / 41
1.5:1 84923 27.6 / 104.5 300 / 41
6:1 84902 3.9 / 14.9 1200 / 83
4:1 84901 5.5 / 20.8 800 / 55
Shovel
3:1 84900 7.1 / 27.0 600 / 41
Std. 84803
1.5:1 84921 14.3 / 54.0
3 / 76
4:1 84904 5.8 / 22.0 300 / 21
1.5:1 84922 Flat Check 14.9 / 56.5
1:1 84923 27.6 / 104.5 200 / 14

15
Industrial Pumping Equipment
PileDriver® III Pressure Primers

Pressure Primer Features

• Positive priming force on the material.
Model 2719 Downward force of the follower forces material into the pump inlet.
This assures positive priming of high-viscosity materials.
• Follower has an Elastomer seal.
Wipers, single o-rings or double o-rings seal against the material
container’s sides. This prevents drying and contamination of the
material and wipes the container’s sides clean.
• Four-way air valve control.
This directional valve controls up/down movement of the follower.
Primer unit remains coupled to the air system at all times. (Use of
an air regulator and gauge is recommended).
• Primers available for a wide range of material container sizes.
Lincoln has primers for 5-, 55- and 300-gallon material containers.
You can match the primer to the container size required for your application.

For U.S. Operating Priming Pressure

Model Drum Size Description Air Pressure psi / bar
gal psi / bar @70/5 @100/7
Model 83274 Single Post for viscous material
2718 * 5
over 500K centipoise
30-150 2-10 4.4 / .3 6.3 .44

Single Post for viscous material

83274 *** 55
over 500K centipoise
40-100 3-7 5 / .35 7.1 .5

Single Post Pump Hoist

& Follower for low- to **Not **Not
2719 *** 55
mediumviscosity materials
40-200 3-14
applicable applicable
100K to 200K centipoise range
Model 2718 Twin Post (Twin 3") for viscous
1735 55 materials in the 200K to 500K 40-150 3-10 2.7 .2 3.7 .26
centipoise range
Twin Post (Twin 6") for viscous
1765 55 40-100 3-7 8.5 .57 12 .8
materials over 500K centipoise
** Gravity priming pressure

Height
Base Dim.
Model Lowered Raised in. / mm
in. / cm in. / cm
Model 1735 2718 * 42.5 / 108 50.25 / 128 22.25 x 22.25 / 600 x 600
83274 *** 89 / 226 89 / 226 26 x 26 / 700 x 700
2719 *** 73 / 185.4 110.5 / 280.7 12.5 x 14 / 317.5 x 355.5
1735 66.125 / 167.6 103 / 261.6 24 x 36 / 600 x 100
1765 66.125 / 167.6 103 / 261.6 24 x 36 / 600 x 1000
*Model 83943 portability kit is available for Model 2718. Includes axle and wheels.
*** Use only 8" and smaller air motors with Models 2719 and 83274.

Note: Units show pumps for illustrative purposes only. Order pump separately.
Model 1765

16
Industrial Pumping Equipment
PileDriver® III Mounting Accessories

Model 83727 Standpipe Assembly

Mounts PileDriver III pump on floor to accept suction line from bulk tank.
Model Inlet Height Diameter
83727 3" NPTF 7¹/₂" / 190 mm 8" / 200mm

Chimeless Drum Kits

Model 83727

Because some materials are supplied in straight-sided or chimeless drums, Lincoln

has developed hold-down kits which facilitate follower and pump extraction from these
drums. Kits are available as follows:
Kit No. For model PowerMaster® III
Model 84167
84167 1704
84503 1736

Model 84722 Series III Air Motor Exhaust Adapter

Replaces standard muffler. Converts exhaust port to ¾" NPT female thread.
Model 84722

Model 84723 Series III Air Motor Cover Panel Kit

Metal cover fits over tie rods. Encloses moving plunger rod.

Low-Level Air Cutoff Kits

Shuts air off when drum is empty. Prevents pump damage and introduction of air
Model 84723 into supply line. ¾" NPT female connections.

Model For Primer

83811 83274
83970 2719
84143 1735, 1765

Air Line Kits for Primers

Includes filter-lubricator-regulator-gauge, bracket and fittings for Models 2719, 1735,
1765 and 83274.

Model 83811 Model Description

84144 ½" Air Line Kit
84141 ¾" Air Line Kit

Model 85387-8
Included in 84144 Kit

17
Industrial Pumping Equipment
Hydro-PowerMaster®

Hydraulic Motor for PowerMaster® III

and PileDriver® III Pump Tubes
• Safe to use where electric or pneumatic motors may be hazardous.
• Virtually eliminates concerns about air supply condition and exhaust emissions
• Efficiently generates high material pressure and flow rate with minimum hydraulic
power consumption.
• Few internal moving parts. No mechanical linkages or solenoids to fail or wear out.
• A completely internal changeover circuit requires no external signal for
reciprocating action.
• A balanced cylinder design eliminates the need for separate up and down
stroke adjustments.
• All key components are machined from steel or aluminum to ensure long service life
in the toughest applications.
• Hydro-PowerMaster was designed and is manufactured under the strict conditions
of an ISO 9001 registered quality system.

Cylinder Dia. Piston Rod Dia. Stroke Length Hydraulic Hydraulic

Model
in. / cm in. / cm in. / cm Fluid Inlet Fluid Outlet
85300 2/5 1⅜ / 3.5 6 / 15 SAE 8 (f) SAE 10 (f)

Hydraulic Hydraulic
Maximum
Operating Operating Fluid Flow Wetted Part
Recommended
Pressure Range Temp. Range Consumption Materials
Continuous Speed
psi / bar Rate
Model 85300 Steel, aluminum,
300 to 1500 –30ºF to 200ºF / 18.8 cu. in./cycle or bronze, Nitrile,
75 cycles/minute
20.4 to 103 –34ºC to 93ºC 1 gallon/12 cycles Teflon®,
Polyurethane

18
Industrial Pumping Equipment
Hydro-PowerMaster®

PowerMaster® III Hydraulic Powered Pumps

with 85300 Hydro-PowerMaster® Hydraulic Motor
With Operating Maximum
Material Max. Free Del.
This Nominal Drum Hydraulic Inlet Delivery
Outlet @75 Cycles/Min.
Pump Ratio Size Pressure Range Pressure
NPTF Gallons / Liters
Tube psi (bar)* psi / bar
500 to 1,500
84985
(34 to 103)
84983 55 gal
84982
1.5:1 1,900 / 131 3.9 / 14.6
84981
84984 16 gal
84986
stub
84987
84976 55 gal
2.5:1 3,000 / 206 2.2 / 8.2
84977 16 gal 500 to 1,500
¾" (34 to 103)
84978 55 gal
4:1 5,000 / 344 1.5 / 5.7
84979 16 gal
84991 55 gal
3:1 4,000 / 275 2.0 / 7.5
84992 16 gal
84993 55 gal
4.5:1 6,750 / 466 1.2 / 4.5
84994 16 gal
84995 55 gal
5:1 7,500 / 517 1.0 / 3.7
84996 16 gal
84997 55 gal 500 to 1,000
7:1 7,000 / 483 0.7 / 2.6
84998 16 gal (34 to 69)
See PowerMaster III section for pump tube specifications, mounting devices and accessories.
*Caution: Do not exceed maximum hydraulic inlet pressure listed for each motor/pump tube combination.

PowerMaster® III

PileDriver® III Hydraulic Powered Pumps

with 85300 Hydro-PowerMaster® Hydraulic Motor
With Operating Maximum
Material Max. Free Del.
This Nominal Hydraulic Inlet Delivery
Outlet @75 Cycles/Min.
Pump Ratio Pressure Range Pressure
NPTF Gallons / Liters
Tube psi (bar)* psi / bar
84900 0.8:1 1200 / 83 7.1 / 27.0
84901 1:1 1500 / 103 5.5 / 20.8
84902 1.5:1 2250 / 155 3.9 / 14.9
500 to 1,500
84904 1:1 1½" 1500 / 103 5.8 / 22.0
(34 to 103)
84921 14.3 / 54.0
0.4:1 600 / 41
84922 14.9 / 56.5
84923 0.2:1 300 / 21 27.6 / 104.5
See PileDriver III section for pump tube specifications, mounting devices and accessories.
*Caution: Do not exceed maximum hydraulic inlet pressure listed for each motor/pump tube combination.

PileDriver® III

19
Industrial Pumping Equipment
Magna-Ram™ Four-Post Pressure Primer

300-Gallon Pressure Primer

for Central Feed of
High-Volume Applications
• Powerful, four-post design
• Replaceable air cylinders
• Positive vent mechanism
• Cast aluminum follower: twin grooves, twin
seals, flat surface
• Built-in crossover for dual primer applications
• Low-level warning
• Empty drum automatic pump shut-off
• Wide-range pump capability
• More compact envelope than
competitive models
• Accommodates two PileDriver® III pumps

Note: Pumps shown for illustrative purpose only. Order pumps separately.

Priming Pressure Follower Envelope Size Envelope Size

Max. Air Weight
* Model @70 psi @100 psi Diameter Lowered Raised
Pressure lbs / kgs
5 bar 7 bar in. / m in. / m in. / m
1785 4000 / 65½" x 51" x 84¼" / 65½" x 51" x 141" /
100 psi 7 bar 9 psi .63 kg/cm2 13 psi .91 kg/cm2 42½ / 1.08
1786 1819 1.7m x 1.3m x 2.1m 1.7m x 1.3m x 3.6m

* Model 1785 has left-hand controls. Model 1786 has right-hand controls.
Note: A minimum 14 ft. (4.3 m) ceiling clearance is recommended.

20
Industrial Pumping Equipment
System Accessories

Material Shut-Off Valves

Lincoln recommends the use of material shut-off valves between the supply pump
and the material supply line pipe. This enables you to disconnect the pump for service
without voiding the supply line of material. Shut-off valves also can be used at the
material outlets of the drop lines to control the flow of material in transfer systems.

Needle-Type Valves
Model Inlet & Outlet Max. Working Pressure - psi / bar
884 ⅜" NPT Female 10000 / 690
885 ½" NPT Female 10000 / 690

Model 884

Quarter-Turn (Ball) Valves

Model Inlet & Outlet Max. Working Pressure - psi / bar
69503 ½" NPT Female 3000 / 206
69425 ³⁄₄" NPT Female 3000 / 206
69423 1" NPT Female 3000 / 206

Model 69503

Low-Pressure Control Valves

Ideal for controlling flow of materials in transfer systems.

Max. Inlet
Model 775 Inlet Outlet
Model Pressure Extension Features / Benefits
Size Size
psi / bar
82906 Optional High flow rate means
775 Rigid Pipe fast transfer of low- to
½" ½" medium-viscosity fluids
776 1000 / 68 Flex Hose
NPTF NPTF
Swivel extension aids access
780 Rigid Pipe
to hard-to-reach areas

Model 780

21
Industrial Pumping Equipment
System Accessories

High-Pressure Control Valves

Ideal for controlling flow of materials in higher-pressure transfer systems and
extrusion systems.

Max. Inlet
Inlet Outlet Features / Options/Kits
Model Pressure Extension
Size Size Benefits Accessories
psi / bar
Trigger latch
91935 carboloy
½" ½" reduces operator
85905 Optional seat for abrasive
NPTF NPTF fatigue during
Model 85905 materials.
continuous use.
Slim, lightweight
design w/ adjustable
trigger spring for
⅛" precise, easy
83586
5000 / NPTF operation. “The
345 Palm Gun” has
¼" 2" rigid with Tungsten Carbide
Model 83586 NPTF ³⁄₃₂" orifice needle and seat.
Same as 83586
except has
hardened steel
83587 Fixed
needle and seat
located intip for drip
control.
66001 Ball seat
Heavy-duty for high-volume
machinedsteel flow.
construction for Max. pressure
10,000 / ⅜" ⅛"
81495 Optional high-viscosity, limited to
680 NPTF NPTF
highpressure, 2000 psi/138 bar.
extreme service Ball & Seat for
applications. abrasive material
applications.

Nozzles and Extensions

Nozzles
Model Orifice - in. / mm Inlet Size Length in. / mm
Model 68874 68874 Brush ⅛" NPT Female 1 / 25.4
14237 ³⁄₃₂ / 2.4 ⅛" NPT Male 1⁷⁄₈ / 48
5803 ¹⁄₃₂ / .8 ⅛" NPT Female 2¾ / 70
11196 ¹⁄₁₆ / 1.6 ⅛" NPT Female 1⅛ / 29

Model 5803

Extensions 1/8" NPT Male

Model Length in. / mm
62028 6 / 150
62061 12 / 300
62117 18 / 450

22
Industrial Pumping Equipment
System Accessories

Swivels
Designed for use between the material hose and control valve to give the operator
more flexibility and mobility and to reduce fatigue.
Max. Working Pressure -
Model Style Threads
Model 81728 psi / bar
81728 Straight ½" NPT Male x ⅜" NPT Male
82072 Straight ½" NPT Male x ½" NPT Male
82087 90° ½" NPT Male x ½" NPT Male 6400 / 435
81729 Universal ½" NPT Male x ⅜" NPT Male
82073 Universal ½" NPT Male x ½" NPT Male

Model 82072
Important Note: For lubricant use only. Not recommended for abrasive or corrosive materials.

Material Pressure Gauges

Pressure
Model Connection Remarks
Range
2½"/65mm dial, black steel case & ring,bronze
0-2000 psi ¼" NPT
66689 bushed movement & front recalibration with stabilizer
0-140 kg/cm² Male Bottom
in shank.
Same as 66689 except dual needles.Red needle
0-2000 psi ¼" NPT
68946 indicates maximum pressure recorded. Black needle
0-140 kg/cm² Male Bottom
indicates actual pressure being developed.
0-3000 psi ¼" NPT 2½"/65mm dial, black steel case,glass filled. Nylon
69827
0-210 kg/cm² Male Back movement.
0-3000 psi ¼" NPT
69844 Same as 69827 except bronze bushed movement.
Model 66689 0-210 kg/cm² Male Bottom

Pressure
Model Connection Remarks
Range
0-5000 psi ¼" NPT
66111 3½"/75mm dial, glass filled nylon movement.
0-350 kg/cm² Male Bottom
0-6000 psi ¼" NPT 2½"/65mm dial, black steel case and plain
69910
0-420 kg/cm² Male Back movement.
2½"/65mm dial, black steel case & plain movement
0-5000 psi ¼" NPT with dual needles. Red needle indicates maximum
69039
0-350 kg/cm² Male Bottom pressure recorded, black needle indicates actual
pressure being developed.
Model 66111
Important Note: For lubricant use only. Not recommended for abrasive or corrosive materials.

23
Industrial Pumping Equipment
Air-Operated Ejectors

Designed to be combined with PowerMaster® or PileDriver® pumping systems to

dispense measured shots of mastics, epoxies, sealants, greases and other viscous
materials. The ejectors are true positive-displacement measuring devices which
accurately dispense material onto the work piece.
• Positive-displacement measuring/dispensing
• Steel plunger & body assembly
• Adjustable plunger stop
• High air/material ratio
• Maintain extreme accuracy and repeatability, even where temperature, viscosity
and material/air supply pressure are variable. (Repeatability suffers with competi-
Model 83664
tive timed metering systems as the variables change.)
• Displacement volume can be adjusted
• High-viscosity capability
• High-speed capability

Dimensions Air Mat’l

Operating Max. Mat’l
Output Inlet Inlet
Model Ratio Air Priming Outlet
Per Cycle A B NPT NPT
Pressure Pressure Female
Female Female
80-100 psi / 1,000 psi / .005-.045in³ 11¼" 4"
83664 27:1 ⅛"
5.5-7 bar 68 bar .08-.74cc 286mm 102mm
⅛" ¹⁄₄"
1,500 psi / .015-.200in³ 13¾" 3⅞"
85250 35:1 ¹⁄₄"
Model 85250 102 bar .25—3.3cc 337mm 98mm
100 psi / .1-1.0in³ 20⁹⁄₁₆" 5¼"
84564 36:1 ⅜" ⅜" ⅜"
7 bar 2,000 psi / 1.6-16cc 522mm 133mm
138 bar .5-2.5in³ 21" 8⅜"
84540 35:1 ½" ½" ½"
8-41cc 536mm 213mm

Model 84564

Model 84540

24
Industrial Pumping Equipment
Measuring Valves

Designed to be combined with PowerMaster® or PileDriver® pumping systems to

dispense accurate volumes of adhesives, sealants, plastisols, lubricants and other
medium- to high-viscosity fluids. These positive displacements valves address the
following applications:
• Product packaging (pump material from 400 lb. drum to fill 16 oz. paper cartridges)
• Process fill (vinyl plastisol into product molds)
• Product fill (measure fluid into gear boxes, drives)
All Lincoln Measuring Valves feature:
• Positive-displacement piston design
• Adjustable piston stops
• Horizontal or vertical mounting capability
• One moving part
With these benefits:
• Accuracy and repeatability that cannot be matched by other measuring systems
such as timed flow
Model 81741 • Capacity to “fine tune" and “lock in" output volume
• Reliability
• Long component life

Model 81740
Max. Mat’l. Dimensions Mat’l.
Output Per Cycle
Model Description Supply Press. in. / mm Inlet /
psi bar cu. in. cc fl. oz. A B Outlet
Require 13 4⁷⁄₁₆ ¼"
81741 5000 340 0-7.5 0-123 0-4
4-way valves 330 113 NPTF
* Index head permits 10 adjustable outputs.

Manual 4-Way Valve

Max.
Material Dimensions
MaterialSupply Material Air Inlet
Model Outlet NPT in. / mm
Pressure Inlet NPT Female
Female
psi bar A B
7¼ 8³⁄₁₆
81740 5000 340 ¼" NPTF ¼" NPTF -
184 208

Manual Measuring Valves

Manual high-pressure measuring valves include handle for manual (hand, foot or
knee) operation or can be actuated with an air cylinder.

Model 84523 Max. Mat’l. Dimensions

Output Per Cycle Mat’l. Mat’l.
Model Supply Pressure in. / mm
Inlet Outlet
psi bar cu. in. cc fl. oz. A B
84523 5000 340 .081-1.8 1.3-30 .045-1 14¹³⁄₁₆/376 4 /101 ¹⁄₄" NPTF ⅛" NPTF
Minimum supply pressure 500 psi (35 bar).

25
Industrial Pumping Equipment
Air-Operated Diaphragm Pumps

¼" - 2" Air-Operated Pumps

Basic Design Features
Diaphragm pumps are driven by
compressed air.The directional air
distribution valve and pilot valve—
85630
the “air end"—are located in the
center section of the pump. Liquid
moves through two manifolds and
outer chambers of the pump—the
“wet end". Generally, check valves
are located at the top and bottom
of each outer chamber or on a
common manifold. The two outer
85628 chambers are connected by
suction and discharge manifolds.
Lincoln’s double diaphragm self-priming design offers many advantages over other pumps.
• Pump abrasive and sheer-sensitive materials. Low interval velocities move abrasives
easily with no damage. Gentle pumping action does not sheer fragile materials.
• Pumps viscous materials. Even heavy or solids-laden materials can be pumped.
• Environmentally friendly. No motors, seals or packing to leak.
• Self-priming. Able to dry prime under most suction lift or flooded suction conditions.
85622 • Variable flow. Regulate the inlet air supply to adjust flow.
• Runs dry without damage.
• Deadheads against closed discharge. Excessive back pressure stops operation without
damage until discharge opens. Eliminates bypass systems or relief valves.
• Explosion-proof. Eliminates sparking concerns of other electrical or rotating pumps.

WARNING
85634
The pump exhaust should be piped to an area for safe disposal of product being
pumped in the event of a diaphragm failure.

1:1 Air-Operated Diaphragm Pump Line

Pump Max. Free Air Max. Rec. Max.
Model Pump Pump Wetted or
Inlet/Outlet Delivery Inlet Inlet Air Susp. Application
Number Description Body Soft Parts
NPT GPM NPT(F) Pressure Solids
85630 ¹⁄₄" Polyprop PTFE ¹⁄₄" / ¹⁄₄" 4 ¹⁄₄" 100 psi ¹⁄₃₂" New oil, AF, windshield washer
85631 ¹⁄₂" Aluminum Buna-N ¹⁄₂" / ¹⁄₂" 15 ¹⁄₄" 100 psi ¹⁄₈" New/used oil, AF
85632 ¹⁄₂" Aluminum Teflon® ¹⁄₂" / ¹⁄₂" 15 ¹⁄₄" 100 psi ¹⁄₈" New oil, AF
85633 ¹⁄₂" Aluminum Hytrel ¹⁄₂" / ¹⁄₂" 15 ¹⁄₄" 100 psi ¹⁄₈" New oil
85622 ¹⁄₂" Polyprop Santoprene ¹⁄₂" / ¹⁄₂" * 14 ¹⁄₄" 100 psi ¹⁄₈" High abrasion materials
85623 ¹⁄₂" Polyprop Teflon® ¹⁄₂" / ¹⁄₂" * 14 ¹⁄₄" 100 psi ¹⁄₈" New oil, AF
85626 ¹⁄₂" Polyprop Buna-N ¹⁄₂" / ¹⁄₂" * 14 ¹⁄₄" 100 psi ¹⁄₈" New oil, AF
85629 1" Aluminum Hytrel 1"/ 1" 45 ¹⁄₂" 125 psi ¹⁄₄" New oil
85628 1" Aluminum Teflon® 1"/ 1" 45 ¹⁄₂" 125 psi ¹⁄₄" New oil, AF
85627 1" Aluminum Buna-N 1"/ 1" 45 ¹⁄₂" 125 psi ¹⁄₄" New/used oil, AF
85621 1¹⁄₂" Aluminum Buna-N 1¹⁄₂" / 1¹⁄₂" 106 ³⁄₄" 125 psi ¹⁄₄" New/used oil, AF
85624 2" Aluminum Buna-N 2"/ 2" 150 ³⁄₄" 125 psi ¹⁄₄" New/used oil, AF

Dual Inlet
85636 ¹⁄₂" Aluminum Buna-N ¹⁄₂" / ¹⁄₂" 15 ¹⁄₄" 125 psi ¹⁄₈" AF/Water
85637 ¹⁄₂" Polyprop Buna-N ¹⁄₂" / ¹⁄₂" 14 ¹⁄₄" 100 psi ¹⁄₈" AF/Water
85639 1" Polyprop Buna-N 1"ANSI** 45 ¹⁄₂" 100 psi ¹⁄₄" AF/Water
85638 1" Aluminum Buna-N 1"/ 1" 42 ¹⁄₂" 125 psi ¹⁄₄" AF/Water
* Can be converted to dual 1/2" outlet. ** 85639 requires 275631 Adapter and 275632 Seal Kit for Pipe Thread installations

26
Industrial Pumping Equipment
Air-Operated Diaphragm Accessories

U.L. Listed
85634 1" UL Aluminum Buna-N 1"/ 1" 45 ¹⁄₂" 50 psi * ¹⁄₄" Used oil, diesel, kerosene
Unleaded gas, diesel,
85635 1" UL Aluminum Teflon® 1"/ 1" 45 ¹⁄₂" 50 psi * ¹⁄₄"
kerosene used oil
* 50 psi flammable liquids, 125 psi others.

Wall Mount Brackets

Model 85255 Wall Mount Bracket
Wall mount bracket for ¼" to ½" air-operated diaphragm pumps.
Model 84817 Wall Mount Bracket
85255 Wall mount bracket for ½" to 2" air-operated diaphragm pumps.

Other Accessories
Model 240994 Drum Adapter Kit
For use with ½" polypropylene AOD pumps. Includes 2" NPT(f) bung bushing,
1" x 36" suction tube and adapter.
Model 275631 1" ANSI Flange To 1" NPT Adapter
Adapts 1" ANSI flange of 85639 polypropylene dual inlet pump to 1" NPT(f).PVC for
84817 low pressure installations. Three required to convert all pump inlets/outlets.
Model 275632 ANSI Bolt Kit with Seal
Attaches adapter to 85639 pump. One bolt kit required for each adapter. Three
required to convert all pump inlets/outlets.
Transfer Pump Accessories
Suction Kits
240994 Model 84945 Suction Kit
For transfer of product from drums, bulk tanks or reservoirs. Includes bung bushing
suction tube, hose and coupling assembly. NOTE: 2" x 1" bell reducer required for use
with Model 1914, not included.
84945
Model 85256 Suction Kit
Same as 84945 except for use with ¼" AOD pumps.

Used-Fluid Overfill Warning Valves

Float rises with used fluid to activate “whistle" warning at prescribed level.
Model 84815 Single Wall
For single wall tanks & drums in used fluid systems and above ground tanks.
84815
Model 84824 Double Wall
Same as 84815 except for double walled tanks and above ground tanks.

4-Way Valve
Model 84816
Four port, two position valve used in waste fluid systems. Enables one pump to pump
into and out of drum or tank.
84816

Thermal Pressure Relief Valve

Model 282902
Protect lube system components from high-pressure spikes caused by temperature
change in a closed fluid network.
Model Application Pre-Set Relief Pressure Port Size
282902 282902 150 psi (10 bar)
282876 Diaphragm Pumps,3:1, 5:1 1000 psi (68 bar) ½" NPT
275197 500 psi (34 bar)

27
Industrial Pumping Equipment
Transfer Pumps

Transfer Systems
Pump material from one container or reservoir to another. Typical applications involve
high-volume transfer of low- to medium-viscosity fluids.
Max. Dischrg. Maximum
Container Pump Tube Pump
Model Ratio Pressure Delivery Packings
Size Construction Outlet
psi / bar GPM/LPM
84080-9 55 gal. ½"
3:1 375 / 26 2.5 / 9.5 316 Stainless Steel Teflon®
84145-9 Bulk NPTF
16 gal. or ¾"-11-
82230 * 55 gal.
22 / 82 Carbon Steel Leather
½"A.N.
1:1 150 / 10
16 gal., 55 Tube-CarbonOutlet ¾"
84829 16.5 / 66 Buna-N
Model 84145-9 gal.or Bulk Body Valox NPTF
* Accessories for 82230: 82715-Teflon® kit; 91172-Hose & nozzle 2
Model Special Features
84080-9 2" bung bushing and ¼" NPTF return inlet.
84145-9 Wall mount kit and suction hose check.
Built-in air control valve for throttling air supply to pump to control material output.Operates on
82230
pressure as low as 20 psi (1.4 bar). Self-adjusting bung bushing.
Light weight and efficient. The pump will stall against pressure and can be controlled by a fluid
84829
dispensing valve.
Model 84080-9
Notes: 1. Suction hose or tube (not included) should be compatible with pumped product and not exceed 10'
(3 m) long nor less than ¾" (19 mm) I.D. 2. 91172 transfer pump j. 8 feet (2.5 m) ¾" (19 mm) I.D. standard
Model 82230
hose and curved spout, with inlet threaded ¾" - 11 - ½" A.N. to fit outlet of 82230 pump. 3. For transfer systems
involving long supply lines, PowerMaster III stub pumps are available. Consult Lincoln for your application needs.
Features and Benefits—Designed for Value
• Proven horizontal, valved-piston motor design for simplicity and reliability
• Motor’s single-stroke action delivers quick dispense, fill or transfer with high-volume output
• Built-in muffler for quiet operation
• Available as stub pump, 16-/55-gallon pump or 250- to 275-gallon tank pump
Specifications
Pneumatic Inlet Operating Weight Pneum. Material
Pump Output/ Delivery Pressure Rec’d.
Temp. Port Port
Ratio Stroke Output (Empty) Inlet Fluids
Max Min Range Outlet
120 psig 20 psig
8.3 bar 1.4 bar Motor oils,
transmission
5.6 in³ / 120 psig 20 psig 30°F - 120°F ¼-18 ½
3.5:1 6 GPM 14 lbs. fluid,
91 cm³ 8.3 bar 1.4 bar -1°C - 49°C NPTF NPTF petroleum-
120 psig 20 psig based fluids
Model 4490 8.3 bar 1.4 bar

Pump Models
Model No. Application Mounting Down Tube Length
4490 16-55 gallon 2" NPT male bung adapter 36.5"
4491 250-275-gallon oval tank 2" NPT male bung adapter 47.0"
4492 Stub 1.5" NPT male N/A

Model 4475 Series Pump

The model 4475 pump is a reciprocating-piston, low-pressure, single-action pump.Air
powers the pump’s piston on the dispensing, or working, stroke. An internal spring returns
the piston and resets it for the working stroke. It pumps continuously when the dispensing
(fluid outlet) valve is open and 20-120 psig air is supplied to the pump.
Model 4480
Specifications
Model Material Pump Tube
Description Operation Attachment
No. Outlet Length
4475 Bare Pump ¹⁄₂" NPTF Pneum. pressure 2" Bung, adj. for 55- & 16-
Spigot extension delivery stroke, 34" (86 cm) gal. drums, bench & portable
4480 Spigot Pump
with on/off valve spring return stroke tank
Model 4475 Model No. Effective Pump Ratio Inlet Air Pressure Output/Stroke Free Delivery
4475 Approx. 0.7:1 to 0.8:1 Max: 120 psi (8.3 bar)
2.9 in³ (48 cm³) Up to 4 gpm (15 lpm)
4480 depending on inlet air pressure Min: 20 psig (1.4 bar)

28
Industrial Pumping Equipment
Other Pumps

Ultra High-Pressure Pumps for Pressure Control

Applications
Designed specifically for oil well services such as wireline and plug valve applications.
In wireline applications, these pumps are used to seal against the well-head pressure
as the well is being logged or perforated. In plug valve applications, they are used to
pump heavy grease into the valve or “Christmas tree valves” to seal any gas leaks.
Series III PowerMaster 4, 6, 8
Max. Delivery Pump
Pump Pump Air Max. Air Pressure
Ratio Press. Tube
Model Tube Motor psig (bar)
psi / bar Length
2390 250:1 84808 80 (5.5)
33¾"
2392 140:1 85304 84806 100 (6.9)
85.70cm
2394 70:1 84804 20,000 (1380) 200 (13.8)
2391 250:1 84808 80 (5.5)
27⅛"
2393 140:1 85305 84806 100 (6.9)
68.90cm
2395 70:1 84804 14,000 (965) 200 (13.8)

Max. Output
Average Operating Wetted
Delivery at 75 Pump Material Gauge
Output/ Temperature Part
Pressure cycles/ Stroke Outlet Port
Cycle Range Materials
psig (bar) min
Autoclave Autoclave
Model 2390 Engineers Engineers
0.67
-40°F to Carbon 6" Medium Medium
20,000 2 in³ GPM
+180°F / Steel, Brass, (152 Pressure Pressure
(1380) (33cc) (2.5
-40°C to +82°C Polyurethane mm) Port for ⁹⁄₁₆" Port for ¼"
LPM)
Tube,¹³⁄₁₆– Tube,⁷⁄₁₆–
16 Thread 20 Thread

Series II PowerMaster 6
Max. Piston
Avg. Output Gland Packing Pump Type Mat’l. Outlet
Delivery Packing
.42 gal/min 1.4 in /cycle
3
Bushing & Molybdenum Disulfide
Shovel ½" NPTF( F)
1.6 l/min 23 cc/cycle Plunger Urethane Stacked V

Air Max.
Model Pump Air Drum
Motor Discharge Air Inlet
Model 2360 No. Tube Motor Size
Size Press.
2360 84304 82736 55 gal. 6 in 14000 psi / 952
¾" NPTF(F)
2361 84604 82736 16 gal. 150 mm bar

Supply Line Booster Pump Tube

Ensures proper supply line pressure over long distances. The booster pump picks
up low material pressure and “boosts” it back up to the desired pressure in the line.
Pumping distance, pipe size and material viscosity determines number and spacing
of booster pumps.
Max. Delivery Gland Packing Material Inlet & Outlet
1 gal/min 3.8 l/min Polyurethane U-cup 3" NPTF(M)

Booster Air Air Motor Max. Discharge

Pump Air Inlet
Pump Motor Size Pressure
Ratio NPTF(F)
Model Model in. / mm psi / bar
82737 7.5:1 2½ / 65 1500 / 102 ¼"
Model 83496 82895 10.5:1 3 / 75 2100 / 142.8
83496 ½"
82730 21.5:1 4¼ / 110
4300 / 292.4
82736 43:1 6 / 150 ¾"

29
Industrial Pumping Equipment
Pump Packages

Dispense Pak #1 Model 85801

For 5-gallon pail, single-gun applications not exceeding 26 cu. in. (426 cc) per minute.
Air Inlet Material Outlet Control Valve Inlet Control Valve Outlet
¼" NPTF ½" NPTF ¼" NPTF ⅛" NPTF¹

Diameter in. / mm cu. in. / cc Gallons / Liters Ft. per Gal.

⅛" / 3.2 .1473 / 2.41 .00064 / .0024 1565
¼" / 6.35 .5891 / 9.65 .00255 / .0096 392
⅜" / 9.525 1.3562 / 22.2 .00574 / .021 174
½" / 12.7 2.3562 / 38.6 .01020 / .038 98
⅝" / 15.875 3.8612 / 63.3 .01592 / .060 63
¾" / 19.05 5.3005 / 86.8 .02295 / .086 44
Model 85801
85801 consists of 1725 pump assy., 67176 coupling, 83586 flow gun, 83594 universal swivel, 85817 20’ x ½" ID
moisture-lok hose assy.
1
For additional nozzle selections refer to page 22.

Model 1725
Portable package designed for original 5-gallon pails. Portable pressure primer
includes reversible steel cleats for securing both straight-sided and tapered pails.
Follower with wiper blade cleans sides of pail as material is dispensed.Air-assisted
follower extraction.
Max.
Max. Del.
Model Pump Drum Discharge Hose Standard
gal./min.
No. Ratio Size Pressure Description Accessories
l./min.
psi / bar
1725 25:1 5 gal. 0.25 / 0.95 5000 / 340 NA NA

Note: Order hose, flow gun, etc. separately.

Model 1725

Model 252
For dispensing heavy greases, NLGI #3. Includes a screw prime follower.
Note: Model includes 7 ft. of ¼" high-pressure hose, 81387 universal swivel and 740 control valve.
Pressure switch is factory set to shut-off pump at 5,000 psi lubricant pressure and to start pump
when pressure drops to 2,500 psi.

Dimensions Output Power Requirements Lubricant Capacity

36¼" x 28" x 17½" 6 oz. / min. 115/230 volt 30 lbs.
921 x 711 x 445 mm 177.6 cc / min 5.4 / 2.7 amp 13.6 kg.

Model 252

30
Industrial Pumping Equipment
Numerical Index
Viton® and Teflon® are registered trademarks of DuPont Performance Elastomers
Model No. . . . . . . . . . . . . . Page No. Model No. . . . . . . . . . . . . . Page No. Model No. . . . . . . . . . . . . . Page No.

252 . . . . . . . . . . . . . . . . . . . . . . . 30 2353 . . . . . . . . . . . . . . . . . . . . . . 14 81387 . . . . . . . . . . . . . . . . . . . . . 30

740 . . . . . . . . . . . . . . . . . . . . . . . 30 2356 . . . . . . . . . . . . . . . . . . . . . . 14 81412 . . . . . . . . . . . . . . . . . . . . . . 9
775 . . . . . . . . . . . . . . . . . . . . . . . 21 2360 . . . . . . . . . . . . . . . . . . . . . . 29 81495 . . . . . . . . . . . . . . . . . . . . . 22
776 . . . . . . . . . . . . . . . . . . . . . . . 21 2361 . . . . . . . . . . . . . . . . . . . . . . 29 81538 . . . . . . . . . . . . . . . . . . . . . . 9
780 . . . . . . . . . . . . . . . . . . . . . . . 21 2367 . . . . . . . . . . . . . . . . . . . . . . 14 81728 . . . . . . . . . . . . . . . . . . . . . 23
884 . . . . . . . . . . . . . . . . . . . . . . . 21 2368 . . . . . . . . . . . . . . . . . . . . . . 14 81729 . . . . . . . . . . . . . . . . . . . . . 23
885 . . . . . . . . . . . . . . . . . . . . . . . 21 2375 . . . . . . . . . . . . . . . . . . . . . . 14 81740 . . . . . . . . . . . . . . . . . . . . . 25
1701 . . . . . . . . . . . . . . . . . . . . . . 10 2390 . . . . . . . . . . . . . . . . . . . . . . 29 81741 . . . . . . . . . . . . . . . . . . . . . 25
1704 . . . . . . . . . . . . . . . . 10, 11, 17 2391 . . . . . . . . . . . . . . . . . . . . . . 29 82072 . . . . . . . . . . . . . . . . . . . . . 23
1709 . . . . . . . . . . . . . . . . . . . . . . 10 2392 . . . . . . . . . . . . . . . . . . . . . . 29 82073 . . . . . . . . . . . . . . . . . . . . . 23
1725 . . . . . . . . . . . . . . . . . . . . . . 30 2393 . . . . . . . . . . . . . . . . . . . . . . 29 82087 . . . . . . . . . . . . . . . . . . . . . 23
1735 . . . . . . . . . . . . . . . . . . . 16, 17 2394 . . . . . . . . . . . . . . . . . . . . . . 29 82230 . . . . . . . . . . . . . . . . . . . . . 28
1736 . . . . . . . . . . . . . . . . 10, 11, 17 2395 . . . . . . . . . . . . . . . . . . . . . . 29 82715 . . . . . . . . . . . . . . . . . . . . . 28
1765 . . . . . . . . . . . . . . . . . . . 16, 17 2716 . . . . . . . . . . . . . . . . . . . 10, 11 82730 . . . . . . . . . . . . . . . . . . . . . 29
1785 . . . . . . . . . . . . . . . . . . . . . . 20 2718 . . . . . . . . . . . . . . . . . . . . . . 16 82736 . . . . . . . . . . . . . . . . . . . . . 29
1786 . . . . . . . . . . . . . . . . . . . . . . 20 2719 . . . . . . . . . . . . . . . . . . . 16, 17 82737 . . . . . . . . . . . . . . . . . . . . . 29
1914 . . . . . . . . . . . . . . . . . . . . . . 27 4475 . . . . . . . . . . . . . . . . . . . . . . 28 82895 . . . . . . . . . . . . . . . . . . . . . 29
2001 . . . . . . . . . . . . . . . . . . . . . . . 6 4480 . . . . . . . . . . . . . . . . . . . . . . 28 82906 . . . . . . . . . . . . . . . . . . . . . 21
2002 . . . . . . . . . . . . . . . . . . . . . . . 6 4490 . . . . . . . . . . . . . . . . . . . . . . 28 83132 . . . . . . . . . . . . . . . . . . . . . . 9
2004 . . . . . . . . . . . . . . . . . . . . . . . 6 4491 . . . . . . . . . . . . . . . . . . . . . . 28 83166 . . . . . . . . . . . . . . . . . . . . . . 9
2008 . . . . . . . . . . . . . . . . . . . . . . . 6 4492 . . . . . . . . . . . . . . . . . . . . . . 28 83274 . . . . . . . . . . . . . . . . . . 16, 17
2010 . . . . . . . . . . . . . . . . . . . . . . . 6 5803 . . . . . . . . . . . . . . . . . . . . . . 22 83369 . . . . . . . . . . . . . . . . . . . . . . 9
2011 . . . . . . . . . . . . . . . . . . . . . . . 6 11196 . . . . . . . . . . . . . . . . . . . . . 22 83496 . . . . . . . . . . . . . . . . . . . . . 29
2014 . . . . . . . . . . . . . . . . . . . . . . . 6 14237 . . . . . . . . . . . . . . . . . . . . . 22 83586 . . . . . . . . . . . . . . . . . . 22, 30
2021 . . . . . . . . . . . . . . . . . . . . . . . 6 16177 . . . . . . . . . . . . . . . . . . . . . . 9 83587 . . . . . . . . . . . . . . . . . . . . . 22
2023 . . . . . . . . . . . . . . . . . . . . . . . 6 62028 . . . . . . . . . . . . . . . . . . . . . 22 83594 . . . . . . . . . . . . . . . . . . . . . 30
2051 . . . . . . . . . . . . . . . . . . . . . . . 6 62061 . . . . . . . . . . . . . . . . . . . . . 22 83664 . . . . . . . . . . . . . . . . . . . . . 24
2052 . . . . . . . . . . . . . . . . . . . . . . . 6 62117 . . . . . . . . . . . . . . . . . . . . . 22 83727 . . . . . . . . . . . . . . . . . . . 9, 17
2066 . . . . . . . . . . . . . . . . . . . . . . . 6 66001 . . . . . . . . . . . . . . . . . . . . . 22 83732 . . . . . . . . . . . . . . . . . . . . . . 9
2075 . . . . . . . . . . . . . . . . . . . . . . . 6 66111 . . . . . . . . . . . . . . . . . . . . . 23 83811 . . . . . . . . . . . . . . . . . . 11, 17
2076 . . . . . . . . . . . . . . . . . . . . . . . 6 66689 . . . . . . . . . . . . . . . . . . . . . 23 83943 . . . . . . . . . . . . . . . . . . 10, 16
2320 . . . . . . . . . . . . . . . . . . . . . . 14 66764 . . . . . . . . . . . . . . . . . . . . . 11 83970 . . . . . . . . . . . . . . . . . . 11, 17
2321 . . . . . . . . . . . . . . . . . . . . . . 14 67176 . . . . . . . . . . . . . . . . . . . . . 30 84080-9 . . . . . . . . . . . . . . . . . . . . 28
2322 . . . . . . . . . . . . . . . . . . . . . . 14 68874 . . . . . . . . . . . . . . . . . . . . . 22 84141 . . . . . . . . . . . . . . . . . . 11, 17
2323 . . . . . . . . . . . . . . . . . . . . . . 14 68946 . . . . . . . . . . . . . . . . . . . . . 23 84143 . . . . . . . . . . . . . . . . . . 11, 17
2325 . . . . . . . . . . . . . . . . . . . . . . 14 69039 . . . . . . . . . . . . . . . . . . . . . 23 84144 . . . . . . . . . . . . . . . . . . 11, 17
2326 . . . . . . . . . . . . . . . . . . . . . . 14 69423 . . . . . . . . . . . . . . . . . . . . . 21 84145-9 . . . . . . . . . . . . . . . . . . . . 28
2328 . . . . . . . . . . . . . . . . . . . . . . 14 69425 . . . . . . . . . . . . . . . . . . . . . 21 84167 . . . . . . . . . . . . . . . . . . 11, 17
2342 . . . . . . . . . . . . . . . . . . . . . . 14 69503 . . . . . . . . . . . . . . . . . . . . . 21 84192 . . . . . . . . . . . . . . . . . . . . . . 9
2349 . . . . . . . . . . . . . . . . . . . . . . 14 69827 . . . . . . . . . . . . . . . . . . . . . 23 84304 . . . . . . . . . . . . . . . . . . . . . 29
2350 . . . . . . . . . . . . . . . . . . . . . . 14 69844 . . . . . . . . . . . . . . . . . . . . . 23 84377 . . . . . . . . . . . . . . . . . . . . . . 9
2352 . . . . . . . . . . . . . . . . . . . . . . 14 69910 . . . . . . . . . . . . . . . . . . . . . 23 84502 . . . . . . . . . . . . . . . . . . . . . . 8

31
Industrial Pumping Equipment
Numerical Index

Model No. . . . . . . . . . . . . . Page No. Model No. . . . . . . . . . . . . . Page No. Model No. . . . . . . . . . . . . . Page No.

84503 . . . . . . . . . . . . . . . . . . 11, 17 84931 . . . . . . . . . . . . . . . . . . . . . 14 85624 . . . . . . . . . . . . . . . . . . . . . 26

84523 . . . . . . . . . . . . . . . . . . . . . 25 84945 . . . . . . . . . . . . . . . . . . . 9, 27 85626 . . . . . . . . . . . . . . . . . . . . . 26
84540 . . . . . . . . . . . . . . . . . . . . . 24 84963 . . . . . . . . . . . . . . . . . . . . . . 9 85627 . . . . . . . . . . . . . . . . . . . . . 26
84564 . . . . . . . . . . . . . . . . . . . . . 24 84976 . . . . . . . . . . . . . . . . . 5, 6, 19 85628 . . . . . . . . . . . . . . . . . . . . . 26
84604 . . . . . . . . . . . . . . . . . . . . . 29 84977 . . . . . . . . . . . . . . . . . . . 6, 19 85629 . . . . . . . . . . . . . . . . . . . . . 26
84722 . . . . . . . . . . . . . . . . . . 11, 17 84978 . . . . . . . . . . . . . . . . . . . 6, 19 85630 . . . . . . . . . . . . . . . . . . . . . 26
84723 . . . . . . . . . . . . . . . . . . 11, 17 84979 . . . . . . . . . . . . . . . . . . . 6, 19 85631 . . . . . . . . . . . . . . . . . . . . . 26
84780 . . . . . . . . . . . . . . . . . . . . . . 9 84981 . . . . . . . . . . . . . . . . . . . 7, 19 85632 . . . . . . . . . . . . . . . . . . . . . 26
84803 . . . . . . . . . . . . . . . . . 6, 7, 15 84982 . . . . . . . . . . . . . . . . . 7, 8, 19 85633 . . . . . . . . . . . . . . . . . . . . . 26
84804 . . . . . . . . . . . 6, 7, 14, 15, 29 84983 . . . . . . . . . . . . . . . . . . . 7, 19 85634 . . . . . . . . . . . . . . . . . . 26, 27
84806 . . . . . . . . . . . 6, 7, 14, 15, 29 84984 . . . . . . . . . . . . . . . 6, 8, 9, 19 85635 . . . . . . . . . . . . . . . . . . . . . 27
84808 . . . . . . . . . . . 6, 7, 14, 15, 29 84985 . . . . . . . . . . . . . 5, 6, 8, 9, 19 85636 . . . . . . . . . . . . . . . . . . . . . 26
84815 . . . . . . . . . . . . . . . . . . . . . 27 84986 . . . . . . . . . . . . . . . . . 6, 8, 19 85637 . . . . . . . . . . . . . . . . . . . . . 26
84816 . . . . . . . . . . . . . . . . . . . . . 27 84987 . . . . . . . . . . . . . . . . . 7, 8, 19 85638 . . . . . . . . . . . . . . . . . . . . . 26
84817 . . . . . . . . . . . . . . . . . . . . . 27 84991 . . . . . . . . . . . . . . . 5, 6, 8, 19 85639 . . . . . . . . . . . . . . . . . . 26, 27
84824 . . . . . . . . . . . . . . . . . . . . . 27 84992 . . . . . . . . . . . . . . . . . 6, 8, 19 85801 . . . . . . . . . . . . . . . . . . . . . 30
84826 . . . . . . . . . . . . . . . . . . . . . . 9 84993 . . . . . . . . . . . . . . . . . 6, 8, 19 85817 . . . . . . . . . . . . . . . . . . . . . 30
84829 . . . . . . . . . . . . . . . . . . . . . 28 84994 . . . . . . . . . . . . . . . . . 6, 8, 19 85905 . . . . . . . . . . . . . . . . . . . . . 22
84900 . . . . . . . . . . . . . . . 14, 15, 19 84995 . . . . . . . . . . . . . . . . . 6, 8, 19 86213 . . . . . . . . . . . . . . . . . . . . . . 8
84901 . . . . . . . . . . . . . . . 14, 15, 19 84996 . . . . . . . . . . . . . . . . . 6, 8, 19 86214 . . . . . . . . . . . . . . . . . . . . . . 8
84902 . . . . . . . . . . . . . . . 14, 15, 19 84997 . . . . . . . . . . . . . . . . . 6, 8, 19 86215 . . . . . . . . . . . . . . . . . . . . . . 8
84904 . . . . . . . . . . . . 13, 14, 15, 19 84998 . . . . . . . . . . . . . . . . . 6, 8, 19 86216 . . . . . . . . . . . . . . . . . . . . . . 8
84905 . . . . . . . . . . . . . . . . . . . . . 14 85250 . . . . . . . . . . . . . . . . . . . . . 24 86217 . . . . . . . . . . . . . . . . . . . . . . 8
84906 . . . . . . . . . . . . . . . . . . . . . 14 85255 . . . . . . . . . . . . . . . . . . . . . 27 86218 . . . . . . . . . . . . . . . . . . . . . . 8
84907 . . . . . . . . . . . . . . . . . . . . . 14 85256 . . . . . . . . . . . . . . . . . . . . . 27 86810 . . . . . . . . . . . . . . . . . . 14, 15
84908 . . . . . . . . . . . . . . . . . . . . . 14 85300 . . . . . . . . . . . . . . . . . . 18, 19 91172 . . . . . . . . . . . . . . . . . . . . . 28
84909 . . . . . . . . . . . . . . . . . . . . . 14 85304 . . . . . . . . . . . . . . . . . . . . . 29 91935 . . . . . . . . . . . . . . . . . . . . . 22
84911 . . . . . . . . . . . . . . . . . . . . . 14 85305 . . . . . . . . . . . . . . . . . . . . . 29 94904 . . . . . . . . . . . . . . 6, 7, 14, 15
84912 . . . . . . . . . . . . . . . . . . . . . 14 85311 . . . . . . . . . . . . . . . . . . . . . 14 94906 . . . . . . . . . . . . . . 6, 7, 14, 15
84913 . . . . . . . . . . . . . . . . . . . . . 14 85314 . . . . . . . . . . . . . . . . . . . . . 14 94908 . . . . . . . . . . . . . . 6, 7, 14, 15
84914 . . . . . . . . . . . . . . . . . . . . . 14 85315 . . . . . . . . . . . . . . . . . . . . . 14 94910 . . . . . . . . . . . . . . . . . . 14, 15
84915 . . . . . . . . . . . . . . . . . . . . . 14 85317 . . . . . . . . . . . . . . . . . . . 4, 12 240994 . . . . . . . . . . . . . . . . . . . . 27
84917 . . . . . . . . . . . . . . . . . . . . . 14 85321 . . . . . . . . . . . . . . . . . . . . . 14 244398 . . . . . . . . . . . . . . . . . . 4, 12
84921 . . . . . . . . . . . . 13, 14, 15, 19 85323 . . . . . . . . . . . . . . . . . . . . . 14 273429 . . . . . . . . . . . . . . . . . . . . . 4
84922 . . . . . . . . . . . . . . . 14, 15, 19 85324 . . . . . . . . . . . . . . . . . . . . . 14 273835 . . . . . . . . . . . . . . . . . . . . . 4
84923 . . . . . . . . . . . . . . . 14, 15, 19 85325 . . . . . . . . . . . . . . . . . . . . . 14 275197 . . . . . . . . . . . . . . . . . . . . 27
84924 . . . . . . . . . . . . . . . . . . . . . 14 85326 . . . . . . . . . . . . . . . . . . . . . 14 275631 . . . . . . . . . . . . . . . . . 26, 27
84925 . . . . . . . . . . . . . . . . . . . . . 14 85327 . . . . . . . . . . . . . . . . . . . . . 14 275632 . . . . . . . . . . . . . . . . . 26, 27
84927 . . . . . . . . . . . . . . . . . . . . . 14 85387-8 . . . . . . . . . . . . . . . . . 11, 17 282876 . . . . . . . . . . . . . . . . . . . . 27
84928 . . . . . . . . . . . . . . . . . . . . . 14 85621 . . . . . . . . . . . . . . . . . . . . . 26 282902 . . . . . . . . . . . . . . . . . . . . 27
84929 . . . . . . . . . . . . . . . . . . . . . 14 85622 . . . . . . . . . . . . . . . . . . . . . 26
84930 . . . . . . . . . . . . . . . . . . . . . 14 85623 . . . . . . . . . . . . . . . . . . . . . 26

32
 A Complete Line of Lubrication Solutions
and Industrial Pumping Products
Our automated systems dispense measured
amounts of lubricant at predetermined intervals.
Automated Lubrication
Systems include Helios® and Duo-Matic™ two-line
systems, and Centro-Matic®, Modular Lube®,
Quicklub® and ORSCO precision oil lubrication.
With our BearingSaver® program, we find the
best automated solution for you from our wide
range of systems for grease, fluid grease and oil.

General Lubrication
Lincoln has developed
specialized pumps and Industrial Pumping Sometimes a simple
pumping stations to approach is the best
handle the difficult job of solution. Our wide range
transferring thick fluids. From of products includes smaller,
the industry-best PileDriver III® self-contained automated
and PowerMaster III® pumps lubricators and general
and air motors to specialty lubrication equipment.
pumps, controls and mounting
accessories, Lincoln is the
preferred pumping system
for many tough applications.
Lincoln Industrial Corp. Phone 314.679.4200 Form 442835 (12/10)
One Lincoln Way Fax 314.679.4359 © Copyright 2010
St. Louis, MO 63120-1578 www.lincolnindustrial.com Printed in U.S.A.