Scribd
Upload
9 views

Project Report VII sem

Project Report VII sem Project Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report

Uploaded by

KESHAV RAINA
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
9 views

Project Report VII sem

Project Report VII sem Project Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report VII semProject Report

Uploaded by

KESHAV RAINA
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 17

A

Project Report (font size 16)


on (font size 14)
Project Title (font size 18)
submitted as partial fulfillment for the award of (font size 14)
BACHELOR OF TECHNOLOGY (font size 22)
DEGREE (font size 20)
SESSION 2024-25 (font size 12)
in
Electrical and Electronics Engineering (font size 18)
By (font size 14)
Student1 Name (Roll No.) (font size 14)
Student2 Name (Roll No.)
Student3 Name (Roll No.)
Student4 Name (Roll No.)

Under the supervision of (font size 16)


Name of Faculty Supervisor (font size 14)

KIET Group of Institutions, Ghaziabad


Affiliated to
Dr. A.P.J. Abdul Kalam Technical University, Lucknow
(Formerly UPTU)
Nov, 2024
DECLARATION

We hereby declare that this submission is our own work and that, to the best of our knowledge
and belief, it contains no material previously published or written by another person nor
material which to a substantial extent has been accepted for the award of any other degree or
diploma of the university or other institute of higher learning, except where due
acknowledgment has been made in the text.

Signature

Name(s):

Roll No.

(s):

Date:

ii
CERTIFICATE
This is to certify that Project Report entitled {“Project Title”}, {“Project group no”} which is
submitted by {“Name of all the Student of the group”} of VII semester for project (KEN 753) in
partial fulfillment of the requirement for the award of degree B. Tech. in Department of Electrical
and Electronics Engineering of Dr. A.P.J. Abdul Kalam Technical University, Lucknow is a
record of the candidates own work carried out by them under my supervision. The matter
embodied in this report is original and has not been submitted for the award of any other degree.

Date: Supervisor Name

ii
i
ACKNOWLEDGEMENT

It gives us a great sense of pleasure to present the report of the B. Tech Project undertaken
during B. Tech. Final Year. We owe special debt of gratitude to supervisor name and
designation, Department of Electrical and Electronics Engineering, KIET Group of Institutions,
Ghaziabad, for his/her constant support and guidance throughout the course of our work. His
sincerity, thoroughness and perseverance have been a constant source of inspiration for us. It
is only his cognizant efforts that our endeavors have seen light of the day.

We also take the opportunity to acknowledge the contribution of Dr. Neeraj Kumar Gupta,
HoD, Electrical and Electronics Engineering Department, KIET Group of Institutions, Ghaziabad,
for his full support and assistance during the development of the project. We also do not like to
miss the opportunity to acknowledge the contribution of all the faculty members of the
department for their kind assistance and cooperation during the development of our project. Last
but not the least, we acknowledge our friends for their contribution in the completion of the
project.

Date:
Sig. (s):
Name
(s):
Roll No. :

i
v
ABSTRACT

Abstract of the report.

V
TABLE OF CONTENTS PageNo.

DECLARATION............................................................................... 11

CERTIFICATE................................................................................. Ill

ACKNOWLEDGEMENTS................................................................... 1v

ABSTRACT...................................................................................... V

LIST OFFIGURES............................................................................ IX

LIST OF TABLES.............................................................................. Xl

LIST OF ABBREVIATIONS................................................................ xu

CHAPTER 1(INTRODUCTION).......................................................... 1

1.1. Introduction................................................................................. 1
1.2. Project Description........................................................................ 1

CHAPTER 2 (LITERATURE RIVIEW)................................................. 2

2.1. Sub heading l ............................................................................................... 2


2.2. Sub heading 2.................................................................................................... 2
2.2.1 Sub sub-heading I................................................................................... 2

CHAPTER3 (PROPOSED METHODOLOGY)..................................................... 3

3.1. Subheading...................................................................................................... 3

CHAPTER 4 (RESULTS AND DISCUSSION)........................................................ 4

CHAPTER 5 (CONCLUSIONS AND FUTURE SCOPE).................................. 5

5.1 Conclusion…................................................................................................... 5
5.2 Future Scope................................................................................................... 5
vi
REFERENCES.................................................................................. 6
APPENDEX l.................................................................................... 7

vi
i
LIST OF FIGURES

Figure No. Description Page No.

1.1 Name of the figure 2

vii
i
LIST OF TABLES

Table. No. Description Page No.

1.1 Name of the Table 22

ix
LIST OF ABBREVIATIONS

PEC Perfect Electric Conductor

X
CHAPTER 1

INTRODUCTION

INTRODUCTION

PROJECT DESCRIPTION

1
CHAPTER 2

LITERATURE REVIEW

2
CHAPTER 3

PROPOSED METHODOLOGY

3
CHAPTER 4

RESULTS AND DISCUSSION

4
CHAPTER 5

CONCLUSION AND FUTURE SCOPE

5
REFERENCES (Sample Format)

1.Al-Zoubi, A., Yang, F., Kishk, A.: A Low-Profile Dual Band Surface Wave Antenna With A
Monopole-Like Pattern, IEEE Transaction on Antennas and Propagation, Vol. 55, No. 12, pp.
3404–3412, (2007).

2.Bernard, L., Chetier, G., Sauleau, R.: Wideband Circularly Polarized Patch Antennas On
Reactive Impedance Substrates, IEEE Antennas Wireless Propagation Letters, Vol. 10, pp.
1015–1018, (2011).

3.Yang, F., Rahmat-Samii, Y.: Reflection Phase Characterizations of The EBG Ground Plane
For Low Profile Wire Antenna Applications, IEEE Transaction on Antennas and Propagation,
Vol. 51, No. 10, pp. 2691–2703, (2003).

4.Nakamura, R., Fukusako, T.: Broadband Design of Circularly Polarized Microstrip Patch
Antenna Using Artificial Ground Structure With Rectangular Unit Cells, IEEE Transaction on
Antennas and Propagation, Vol. 59, No. 6, pp. 2103–2110, (2011).

6
APPENDIX 1

You might also like