e 609 silver

Instruction manual
 Delivery includes

Delivery includes
• e 609 silver
• pouch
• quick guide
• safety guide

Product overview

1
3

FRON
T

2
1. Sound inlet basket
2. XLR-3 connector
3. Front

e 609 | 2/7
 Installation

Installation
Attaching the microphone
Screw the microphone clamp to a stand.
Place the microphone with its back end into the microphone clamp.
Orient the microphone together with the microphone clamp.

Connecting the microphone

Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of
the microphone.

e 609 | 3/7
 Operation

Operation
Positioning the microphone
Position the microphone between the dust cap and surround.
The front must face the loudspeaker.

It is vital to observe the following notes:

Position Resulting sound Commentary

A many trebles microphone directed towards the dome of the
aggressive sound loudspeaker
B less trebles, more lower good starting position:
mids, smoother sound microphone directed towards the middle between
balanced, natural sound dome and edge of the loudspeaker
If necessary, turn the microphone by approx. 30°
towards the edge.
C less trebles, more lower microphone directed towards the edge of the
mids, smoother sound loudspeaker

A B C

e 609 | 4/7
 Cleaning and maintaining the e 609 silver

Positioning the monitor loudspeakers

To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the
highest cancellation of the microphone (approx. 135°).

135°

Cleaning and maintaining the e 609 silver

CAUTION
LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT!
Liquids entering the housing of the product can cause a short-circuit and damage the electronics.

Keep all liquids away from the product.

Do not use any solvents or cleansing agents.

Disconnect the products from the power supply system and remove rechargeable batteries and
batteries before you begin cleaning.
Clean all products only with a soft, dry cloth.

e 609 | 5/7
 Specifications

Specifications
Transducer principle dynamic
Frequency response 40 - 15,000 Hz
Pick-up pattern super-cardioid
Sensitivity (free field, no load) 1.5 mV/Pa
Nominal impedance (at 1 kHz) 350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Dimensions 55 x 34 x 134 mm
Weight 140 g

Polar pattern
0° 0°
30° 0 30°
5
10 125 Hz
60° 60°
15 250 Hz
20 500 Hz
25 1,000 Hz
90° dB 90°
2,000 Hz
4,000 Hz
8,000 Hz
120° 120° 16,000 Hz

150° 150°
180° 180°

Frequency response
dBV
- 40

- 50

- 60

- 70

- 80

- 90
50 10
0
20
0
50
0 00 00
0
00
0
00
0
00
0
Hz
1,0 2, 5, 10
, ,
20
0°, 1 m
0°, 5 cm

e 609 | 6/7
 Overview of applications

Connector assignment

+
+ +
1 2 2 1 + 2 1
3 3 3

XLR XLR XLR

+
1 2
3
+
UNBALANCED

XLR 6.3 mm

+
1 2
3 BALANCED
+

XLR 6.3 mm

Overview of applications
Primary application
Secondary application

e 602 II • • •
• • • •
e 604 • • • • • •
e 608 • • • • •
e 609 silver • • • • • •
e 614 • • • • • • • •
e 835 • • •
e 845 • • •
e 865 • • •
e 901 • • •
e 902 • • • • •
e 904 • • • • • •
e 906 • • • • • •
e 908 • • • • • •
e 914 • • • • • • • •
e 935 • •
e 945 • •
e 965 • • • • •
e 609 | 7/7