System startup
version:U-Boot 2018.07 (Jul 29 2020 - 15:40:01 +0800)
TLB ADDR:0xe000000
Build Date: Jul 29 2020, 15:40:20
CPU: Hi3751v350
Boot Media: eMMC
gd:10bfff50,DRAM addr:0x0,size:0x40000000,actual size:0x40000000
1 GiB
DRAM actual size:1 GiB
WARNING: Caches not enabled
board_init,41
MMC: hisi-sdhci: 0
EMMC/MMC/SD controller initialization.
current clock: 400000Hz, host timing: 0x0
current clock: 52000000Hz, host timing: 0x1
current clock: 120000000Hz, host timing: 0xa
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GTF4"
Chip Type: MMC
Version: 5.1
Speed: 120000000Hz
Bus Width: 8bit
Mode: HS400ES
Loading Environment from MMC... OK
Net:
======== [PARAM] ========
SYSID: 0x19060350
SUSPENDTYPE: shutdown
GPIO GROUP 0x0 disable
GPIO GROUP 0x1 disable
GPIO GROUP 0x2 disable
GPIO GROUP 0x3 disable
GPIO GROUP 0x4 disable
TIMER WAKEUP: 0xffffffff
IR NUM: 0x6
IR KEY: 0x28d7f708
IR KEY: 0xffffff
IR KEY: 0xffffff
IR KEY: 0xfe019088
IR KEY: 0xe41b9088
IR KEY: 0xf00f9088
LSADC ZERO: 0xff
LSADC channel A enable
LSADC channel B enable
LSADC channel C disable
LSADC channel D disable
LSADC GLITCHSAMPLE: 0x5
LSADC TIMESCAN: 0x258
LSADC POWERKEY0: 0x0, 0x14
LSADC POWERKEY1: 0xff, 0xff
LSADC POWERKEY2: 0xff, 0xff
LSADC POWERKEY3: 0xff, 0xff
auto wakeup flag: 0x0
wakeup condition: 0x777
power down delay: 0x4b0
power up delay: 0x14
Cvt_Pm_State_Init uart-mode val[0] = 0x0
light on
CEC ONE play: 0x0
HDMIRX_CLK_WKUP: 0x0
HDMIRX HPD invert: 0xf
HDMIRX HPD function: 0x1
HDMIRX g_cec_wake_up: 0x1
HDMIRX g_suspend_port: 0x5000001
i2c pull up disable
lsadc:6bit,data_delta=8,enable deglitch,power down,continue scan
VGA wakeup is off!
====== [MCU init ready] ======
power down ARM ===>
ddr_power_ctrl:50201
group 2,bit 5 have no pinmux
====== [ARM power down] ======
stb gpio states:
group dir(0:in 1:out) level(0:low 1:high) func(0:other 1:gpio)
0 00000010 00000010 00000000
1 00000000 00000000 00000010
2 00100000 10000000 00000000
3 00000000 00000000 00000000
4 00000000 00000000 00000000
====== [PM File: ID_PM_CVTE_DEFAULT_SA.txt ] ======
====== [version : 062 - v1.1] ======
===== [waiting for powerkey] =====
DDC_Pinmux_config to uart mode!
_lsadc channel A: 0x5f00e400
_power on!
====== [wake up by keypad] ======
i2c pull up enable
suspend last 36s
====== [ARM power on] ======
System startup
version:U-Boot 2018.07 (Jul 29 2020 - 15:40:01 +0800)
TLB ADDR:0xe000000
Build Date: Jul 29 2020, 15:40:20
CPU: Hi3751v350
Boot Media: eMMC
gd:10bfff50,DRAM addr:0x0,size:0x40000000,actual size:0x40000000
1 GiB
DRAM actual size:1 GiB
WARNING: Caches not enabled
board_init,41
MMC: hisi-sdhci: 0
EMMC/MMC/SD controller initialization.
current clock: 400000Hz, host timing: 0x0
current clock: 52000000Hz, host timing: 0x1
current clock: 120000000Hz, host timing: 0xa
MMC/SD Card:
MID: 0x15
Read Block: 512 Bytes
Write Block: 512 Bytes
Chip Size: 7456M Bytes (High Capacity)
Name: "8GTF4"
Chip Type: MMC
Version: 5.1
Speed: 120000000Hz
Bus Width: 8bit
Mode: HS400ES
Loading Environment from MMC... OK
Net:
Slave boot startup
version:U-Boot 2018.07 (Jul 29 2020 - 15:40:32 +0800)
TLB ADDR:0x10e00000
Build Date: Jul 29 2020, 15:42:41
CPU: Hi3751v350
Boot Media: eMMC
gd:13ffff50,DRAM addr:0x0,size:0x40000000,actual size:0x40000000
1 GiB
DRAM actual size:1 GiB
WARNING: Caches not enabled
board_init,41
The DDR memory layout:
page table: 0x10e00000 - 0x11200000 4 MiB
stack: 0x11200000 - 0x11600000 4 MiB
irq stack: 0x11eefecc - 0x11fefecc 1 MiB
.text: 0x14000000 - 0x1406968c 421.6 KiB
data: 0x1406968c - 0x160f7994 32.6 MiB
init_sequence_r done!
Not enough memory for reserve memory!
cant has HI_DRV_MAILBOX_CVTE_UPGRADE_INFO
Loading Environment from MAILBOX... OK
[addr1 addr2 addr3 [addr4]
- start atf at addr1
Image at addr2,fdt at addr3
optional secureos at addr4
NOTICE: BL31: v2.0(release):HISI350_fae_sa_v1.0.0-dirty
NOTICE: BL31: Built : 16:19:43, Jul 29 2020
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.127_s5 (builder@hisi-CB_S_HISI35X_B_fae_sa) (gcc
version 7.4.1 20181213 (gcc-linaro-7.4-2019.02 glibc-2.30 czyong Thu Jan 9 19:34:00
CST 2020) ) #1 SMP PREEMPT Wed Jul 29 16:19:11 CST 2020
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction
cache
[ 0.000000] OF: fdt:Machine model: Hi3751
[ 0.000000] cma: Reserved 8 MiB at 0x3f800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 15 pages/cpu @e5eb1000 s30732 r8192 d22516 u61440
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages:
260758
[ 0.000000] Kernel command line: androidboot.hardware=bigfish selinux=1
androidboot.selinux=enforcing androidboot.serialno=0123456789
firmware_class.path=/vendor/firmware/ console=ttyAMA0,115200 loglevel=7
no_console_suspend
blkdevparts=mmcblk0:1M(fastboot),1M(bootargs),1M(bootargsbak),2M(slaveboot),40M(rec
overy),8M(panelparam),2M(deviceinfo),40M(logo),40M(boot),1M(dtbo),2M(atf),8M(truste
dcore),10M(securestore),1M(versioninfo),1M(misc),10M(bootmusic),10M(bootmusicsec),8
0M(tconparam),4M(demura),10M(factorydata),1024M(system)ro,1024M(vendor)ro,50M(atv),
800M(cache),3890M(userdata) skip_initramfs init=/init root=/dev/mmcblk0p21 rootwait
mtdparts=hi_sfc:-(hi_sfc) pci=nomsi mmz=ddr,0,0,8M vmalloc=400M irqflood=10000
cgroup.memory=nokmem swapaccount=0 coredumpmode=OFF mem=1024M
androidboot.mem.size=1024M hilog=off
[ 0.000000] irq flood detection enabled, threshold:10000
[ 0.000000] core dump mode is OFF
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 32768 bytes
[ 0.000000] early log buf free: 13664(83%)
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 887760K/1048576K available (12288K kernel code, 724K rwdata,
4332K rodata, 3072K init, 1383K bss, 152624K reserved, 8192K cma-reserved, 409600K
highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe7000000 - 0xff800000 ( 392 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe6800000 ( 616 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbe800000 - 0xbfe00000 ( 22 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0d00000 (13280 kB)
[ 0.000000] .init : 0xc1300000 - 0xc1600000 (3072 kB)
[ 0.000000] .data : 0xc1600000 - 0xc16b5018 ( 725 kB)
[ 0.000000] .bss : 0xc16b7000 - 0xc1810d24 (1384 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0xf8840000
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz
(virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every
4398046511097ns
[ 0.000016] Switching to timer-based delay loop, resolution 41ns
[ 0.000216] Console: colour dummy device 80x30
[ 0.000236] Calibrating delay loop (skipped), value calculated using timer
frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.000250] pid_max: default: 32768 minimum: 301
[ 0.000349] Security Framework initialized
[ 0.000359] SELinux: Initializing.
[ 0.000436] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000447] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001169] CPU: Testing write buffer coherency: ok
[ 0.001202] ftrace: allocating 49212 entries in 145 pages
[ 0.098943] CPU0: update cpu_capacity 1024
[ 0.098957] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.098980] Setting up static identity map for 0x100000 - 0x100058
[ 0.119410] GICv3: CPU1: found redistributor 1 region 0:0xf8860000
[ 0.119438] CPU1: update cpu_capacity 1024
[ 0.119442] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.127511] GICv3: CPU2: found redistributor 2 region 0:0xf8880000
[ 0.127537] CPU2: update cpu_capacity 1024
[ 0.127542] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.135625] GICv3: CPU3: found redistributor 3 region 0:0xf88a0000
[ 0.135651] CPU3: update cpu_capacity 1024
[ 0.135656] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.135746] Brought up 4 CPUs
[ 0.135782] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.135788] CPU: All CPU(s) started in SVC mode.
[ 0.135825] CPU3: update max cpu_capacity 1024
[ 0.139551] CPU1: update max cpu_capacity 1024
[ 0.142243] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3
rev 4
[ 0.142647] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275000 ns
[ 0.142666] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.143859] NET: Registered protocol family 16
[ 0.145211] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.147947] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint
registers.
[ 0.147959] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.148257] Serial: AMBA PL011 UART driver
[ 0.148737] pstore: using zlib compression
[ 0.149074] console [pstore-1] enabled
[ 0.149082] pstore: Registered ramoops as persistent store backend
[ 0.149092] ramoops: attached 0x4000@0x1dd00000, ecc: 0/0
[ 0.151031] f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 22, base_baud = 0)
is a PL011 rev2
[ 0.726771] console [ttyAMA0] enabled
[ 0.731148] f8006000.uart: ttyAMA1 at MMIO 0xf8006000 (irq = 23, base_baud = 0)
is a PL011 rev2
[ 0.742324] hisi-dma f8ca0000.hidma: dma_channels:0x20 dma_requests:0x10
dma_min_chan:0x0 dma_used_chans:0xf
[ 0.754618] hisi-dma f8ca0000.hidma: initialized
[ 0.759269] hisi-dma f8ca0000.hidma: hisi_dma_probe ok!
[ 0.804986] hisi_iommu_ptable_addr:phy 0x25100000 size:0x100000
[ 0.810936] hisi_iommu_err_rdaddr :phy 0x25b89800 size:0x200
[ 0.816607] hisi_iommu_err_wraddr :phy 0x25b89a00 size:0x200
[ 0.822474] in hisi_iommu_domain_init start
[ 0.827568] in hisi_iommu_domain_init end
[ 0.832116] SCSI subsystem initialized
[ 0.836459] usbcore: registered new interface driver usbfs
[ 0.842107] usbcore: registered new interface driver hub
[ 0.847574] usbcore: registered new device driver usb
[ 0.853060] Linux video capture interface: v2.00
[ 0.859009] Advanced Linux Sound Architecture Driver Initialized.
[ 0.865749] Bluetooth: Core ver 2.22
[ 0.869410] NET: Registered protocol family 31
[ 0.873868] Bluetooth: HCI device and connection manager initialized
[ 0.880239] Bluetooth: HCI socket layer initialized
[ 0.885132] Bluetooth: L2CAP socket layer initialized
[ 0.890223] Bluetooth: SCO socket layer initialized
[ 0.896895] clocksource: Switched to clocksource arch_sys_counter
[ 0.939110] VFS: Disk quotas dquot_6.6.0
