Scribd
Upload
128 views

Types of Loadings: Strength of Materials Is A Subject Which Deals With Loads, Deformations and The Forces

Strength of materials deals with loads, deformations, and internal forces acting on materials. There are three main types of loadings: transverse loading which causes bending; axial loading which causes stretching or shortening; and torsional loading which causes twisting. Strain refers to deformation of materials while stress refers to internal forces. The strength of materials relies on three analytical methods: strength which is load carrying capacity, stiffness which is deformation, and stability which is maintaining initial configuration. Stress types include normal stress, shear stress, compressive stress, and tensile stress. Strain expresses deformation per unit length. Hooke's law states stress is linearly related to strain for some materials. Materials can be isotropic with uniform properties or anisotropic with direction

Uploaded by

Erick John Perez Sinforoso
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
128 views

Types of Loadings: Strength of Materials Is A Subject Which Deals With Loads, Deformations and The Forces

Strength of materials deals with loads, deformations, and internal forces acting on materials. There are three main types of loadings: transverse loading which causes bending; axial loading which causes stretching or shortening; and torsional loading which causes twisting. Strain refers to deformation of materials while stress refers to internal forces. The strength of materials relies on three analytical methods: strength which is load carrying capacity, stiffness which is deformation, and stability which is maintaining initial configuration. Stress types include normal stress, shear stress, compressive stress, and tensile stress. Strain expresses deformation per unit length. Hooke's law states stress is linearly related to strain for some materials. Materials can be isotropic with uniform properties or anisotropic with direction

Uploaded by

Erick John Perez Sinforoso
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Strength of materials is a subject which deals with loads, deformations and the forces acting on a material.

Types of loadings Transverse loading - Forces applied perpendicular to the longitudinal axis of a member. Transverse loading causes the member to bend and deflect from its original position, with internal tensile and compressive strains accompanying the change in curvature of the member. Axial loading - The applied forces are collinear with the longitudinal axes of the member. The forces cause the member to either stretch or shorten. Torsional loading - Twisting action caused by a pair of externally applied equal and oppositely directed force couples acting on parallel planes or by a single external couple applied to a member that has one end fixed against rotation.

Deformation of the material is called strain, while the intensity of the internal forces is called stress. The strength of any material relies on three different type of analytical method: strength, stiffness and stability, where strength refers to the load carrying capacity, stiffness refers to the deformation or elongation, and stability refers to the ability to maintain its initial configuration. Shear stress, (sigma), acts parallel to the surface of an object, like friction. Normal stress, (tau), acts perpendicular to the surface of an object. Compressive stress (or compression) is the stress state caused by an applied load that acts to reduce the length of the material Tensile stress is the stress state caused by an applied load that tends to elongate the material in the axis of the applied load, in other words the stress caused by pulling the material. Shear stress is the stress state caused by a pair of the built energy by opposing forces acting along parallel lines of action through the material, in other words the stress caused by faces of the material sliding relative to one another. Bearing stress is the contact pressure between the separate bodies. It differs from compressive stress, as it is an internal stress caused by compressive forces. Strain is the deformation per unit length. Shear strain, (gamma), expresses the difference between two originally perpendicular points in the material Hooke's law states that the stress is linearly related to strain for some materials. Materials with whose properties don't have a directional variation are called isotropic materials. Materials which have different properties in different directions are called anisotropic.

You might also like