VISVESVARAYA TECHNOLOGICAL UNIVERSITY

"JNANASANGAMA", BELAGAVI- 590 018

A Project Phase-2 Report on

“TITLE/TOPIC/TITLE/TOPIC/TITLE/TOPIC/
TITLE/TOPIC/TITLE/TOPIC/TITLE/TOPIC/ TITLE/TOPIC/”
Submitted in partial fulfillment of the requirement for the award of the degree of

BACHELOR OF ENGINEERING
in
MECHANICAL ENGINEERING

by

Student name-1 1AYYRMEUSN

Student name-2 1AYYRMEUSN
Student name-3 1AYYRMEUSN
Student name-3 1AYYRMEUSN

Under the guidance of

Dr/Mr. GUIDE NAME, Qualification
Designation
Department of Mechanical Engineering

DEPARTMENT OF MECHANICAL ENGINEERING

Acharya Institute of Technology
(Affiliated to Visvesvaraya Technological University, Belagavi)
Acharya Dr. Sarvapalli Radhakrishnan Road, Soladevanahalli,
Bangalore – 560 107
2024-2025
 ACHARYA INSTITUTE OF TECHNOLOGY
(Affiliated to Visvesvaraya Technological University, Belagavi)
Acharya Dr. Sarvapalli Radhakrishnan Road, Soladevanahalli,
Bangalore – 560 107
DEPARTMENT OF MECHANICAL ENGINEERING

CERTIFICATE

Certified that the Project work entitled “……………………............................................TOPIC/

TITLE…………………………………..”, carried out by Mr./Ms Student name, USN
1AYYRMEUSN, Student name, USN 1AYYRMEUSN, are bonafide students of Acharya Institute of
Technology, in partial fulfillment for the award of Bachelor of Engineering in Mechanical Engineering
of the Visvesvaraya Technological University, Belgaum during the year 2024-25. It is certified that all
corrections/ suggestions indicated for Internal Assessment have been incorporated in the Report deposited
in the departmental library. The project has been approved as it satisfies the academic requirements in
respect of Project work prescribed for the said Degree.

…………………… ……………………….. ……………………….

Dr/Mr. Guide Name Dr. ------ Dr.----------
Designation Head of the Department Principal
(Project Guide)

External Viva

Name of the Examiners Signature with date

1.

2.

(i)
 ACKNOLEDGEMENT

We are grateful to the sanctum of “Acharya Institute of technology”, the temple of learning, for
providing an excellent platform to pursue our project work in good spirit.

We would like to sincerely thank our President Mr B.M. Reddy for encouraging us.

We would like to express our gratitude to our honorable chairman Mr. B. Premnath Reddy for all his
initiatives and for providing us a congenial atmosphere to work in.

We would like to thank our beloved Principal Dr.---------------, in particular for the excellent facilities
provided in the college laboratories.

We would like to thank our beloved Vice Principal Prof.---------------, in particular for the excellent
facilities provided in the college laboratories

Our deep and profound gratitude to our Head of the Department Dr. ----------for his constant help and
support and granting us permission to carry out this project work.

We express our sincere gratitude to our guide Dr/Mr. Guide Name, Department of Mechanical
Engineering for their guidance, timely suggestions and encouragement at every step, which helped us to
complete the work successfully.

We thank all the teaching and non teaching staff of our Mechanical Engineering department for their
constant support.

We are also thankful to our beloved parents who have motivated and installed confidence in us.

(ii)
ABSTRACT

(one page)

(iii)
 CONTENTS
Certificate…………………………………………………………………………..i

Acknowledgement …………………………………………………………………ii

Synopsis ……………………………………………………………………………iii

CHAPTER TOPICS PAGE NO.

CHAPTER 1 :

1.1 :

1.2 :

1.3 :

CHAPTER 2 :

2.1 :

2.2 :

2.3 :

CHAPTER 9 : Conclusion

CHAPTER 10 : Scope for future work

CHAPTER 11 : Reference

Appendix
Topic /title

……………….inside sheet for chapters 1, 2 , 3, ………….etc..

Department of Mechanical Engineering, Acharya Institute of Technology, Bangalore. Page no.

GUIDELINES FOR THE PREPARATION OF B.E./B. Tech. PROJECT REPORTS
 Project reports should be typed neatly only on one side of the paper with 1.5 or double line spacing on a A4
size bond paper (210 x 297 mm). The margins should be: Left - 1.25", Right - 1", Top and Bottom - 0.75".
 The total number of reports to be prepared are
 One copy to the department
 One copy to the concerned guide(s)
 Two copies to the sponsoring agency
 One copy to the candidate.
3. Before taking the final printout, the approval of the concerned guide(s) is mandatory and suggested
corrections, if any, must be incorporated.
4. For making copies dry tone Xerox is suggested.
5.Every copy of the report must contain
 Inner title page (White)
 Outer title page with a plastic cover
 Certificate in the format enclosed both from the college and the organization where the project is carried
out.
 An abstract (synopsis) not exceeding 100 words, indicating salient features of the work. (NB: four copies of
the abstract are to be submitted to the Department on the date of submission separately)

6.The organization of the report should be as follows

1. Inner title page
2. Abstract or Synopsis
3. Acknowledgments Usually numbered in roman
4. Table of Contents
5. List of table & figures (optional)
 Chapters (to be numbered in Arabic) containing Introduction-, which usually specifies the scope of work and
its importance and relation to previous work and the present developments, Main body of the report divided
appropriately into chapters, sections and subsections.
 The chapters, sections and subsections may be numbered in the decimal form for e.g. Chapter 2, sections as
2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.
 The chapter must be left or right justified (font size 16). Followed by the title of chapter centered (font size
18), section/subsection numbers along with their headings must be left justified with section number and
its heading in font size 16 and subsection and its heading in font size 14. The body or the text of the report
should have font size 12.
 The figures and tables must be numbered chapter wise for e.g.: Fig. 2.1 Block diagram of a serial binary
adder, Table 3.1 Primitive flow table, etc.
 The last chapter should contain the summary of the work carried, contributions if any, their utility along with
the scope for further work.
Reference OR Bibliography: The references should be numbered serially in the order of their occurrence in the
text and their numbers should be indicated within square brackets for e.g. [3]. The section on references should
list them in serial order in the following format.
1. For textbooks - A.V. Oppenheim and R.W. Schafer, Digital Signal Processing, Englewood, N.J., Prentice
Hall, 3 Edition, 1975.
2. For papers - David, Insulation design to combat pollution problem, Proc of IEEE, PAS, Vol 71, Aug
1981, pp 1901-1907.
 Only SI units are to be used in the report. Important equations must be numbered in decimal form for e.g.
 V = IZ.......... (3.2)
 All equation numbers should be right justified.
 The project report should be brief and include descriptions of work carried out by others only to the
minimum extent necessary. Verbatim reproduction of material available elsewhere should be strictly
avoided. Where short excerpts from published work are desired to be included, they should be within
quotation marks appropriately referenced.
 Proper attention is to be paid not only to the technical contents but also to the organization of the report and
clarity of the expression. Due care should be taken to avoid spelling and typing errors. The student should
note that report-write-up forms the important component in the overall evaluation of the project
 Hardware projects must include: the component layout, complete circuit with the component list containing
the name of the component, numbers used, etc. and the main component data sheets as Appendix. At the
time of report submissions, the students must hand over a copy of these details to the project coordinator
and see that they are entered in proper registers maintained in the department.
 Software projects must include a virus free disc, containing the software developed by them along with the
read me file. Read me file should contain the details of the variables used, salient features of the software
and procedure of using them: compiling procedure, details of the computer hardware/software
requirements to run the same, etc. If the developed software uses any public domain software downloaded
from some site, then the address of the site along with the module name etc. must be included on a separate
sheet. It must be properly acknowledged in the acknowledgments.
 Sponsored Projects must also satisfy the above requirements along with statement of accounts; bills for the
same dully attested by the concerned guides to process further. They must also produce NOC from the
concerned guide before taking the internal viva examination.
 The reports submitted to the department/guide(s) must be hard bounded, with a plastic covering.
 Separator sheets, used if any, between chapters, should be of thin page
 Certificate issued at the Organization where the project was carried out
(On a separate sheet, If applicable)
NAME OF THE INDUSTRY / ORGANIZATION
Address with pin code
CERTIFICATE

Certified that the project work entitled …………………………………………………………………………………………... carried out

by Mr./Ms . ………………………………………….., USN…………………..………, a bonafide student of
……………………………………………………………………….in partial fulfilment for the award of Bachelor of Engineering /
Bachelor of Technology in …………………………………………...………………………….……… of the Visvesvaraiah
Technological University, Belgaum during the year ……………………... It is certified that, he/she has completed the
project satisfactorily

Name & Signature of the Guide Name & Signature of the Head of organization

COLOUR OF THE OUTER COVER/FRONT PAGE OF UG DISSERTATION / PROJECT REPORT

Color of the outer

Sl.
UG course cover/front page of
No.
the report

Electronics & Communication, Telecommunication, Bio-Medical, Medical

1 Electronics, Electrical & Electronics and Instrumentation Technology PURPLE
(EC/TE/BM/ML/EE/IT)

2 Computer Science and Information Science and Engineering (CS/IS) CREAM

Mechanical, Printing Technology, Mining, Industrial Production, Industrial

3 Engineering & Management, Manufacturing Science and Engineering and SKY BLUE
Automobile (ME/PT/MI/IP/IM/ MA /AU)

4 Civil, Transportation and Environmental Engineering (CV/TR/EV) GREY

Chemical, Cement & Ceramics, Silk, Textile Technology and Polymer Science
5 BROWN
(CH/CC/ST/TX/PM)