Last update on: 31-05-2024

Version: 4

PRODUCT DATA SHEET Optimum dosage of ADDMIX 700 should be determined with
trial mixes. Higher dosages may be required when certain

ADDMIX® 700 combinations of materials and conditions are present or

water reduction in excess of 15% is required.
ADDMIX 700 is an integral waterproofing compound for
concrete and mortar. When producing waterproof concrete Keep water/cement
ratio is within the range of 0.40 to 0.60 and Place concrete
Specification: quickly and compact it well.
The liquid integral waterproofing Compound shall be
ADDMIX 700, lignosulphonate polymer based, Application procedure:
waterproofing and plasticizing admixture. Direction for use:
ADDMIX 700 is a ready-to-use liquid which is dispensed into
Uses: the concrete together with the mixing water. The plasticizing
 Structural concrete that is constantly or effect and water reduction are higher if the admixture is
intermittently in contact with water. added to the damp concrete after 50 to 70% of the mixing
 In sea walls, tunnels, concrete linings, basements water has been added. The addition of ADDMIX 700 to dry
etc. aggregate or cement is not recommended.
 Structural and pre-cast concrete in exposed
superstructures. Effect of over dosage:
 Waterproofing cum plasticizing admixture for A severe over-dosage of ADDMIX 700 shall result in some of
cement mortars and plasters. the followings:
 Extension of initial and final set
Advantage:  Increase in air entrainment.
 Provides good resistance to water penetration  Bleed/segregation of mix, quick loss of workability
either under hydrostatic pressure or capillary  Increased plastic shrinkage
absorption, Increased durability, reduced A slight overdosing may not adversely affect the ultimate
efflorescence. strength of the concrete and can achieve higher strengths
 Reduced sulphate attack. than normal concrete, provided it is properly compacted and
 Improved cohesion, reduce segregation. cured. Due allowance should be made for the effect of fluid
 Pumpability of concrete is greatly improved. concrete pressure on form work, and stripping times should
 Improved surface finish. be monitored.
 Reduced shrinkage cracks in plasters.
 Do not reduce compressive strengths. Compatibility:
 Low dosage hence economical. ADDMIX 700 is compatible with most admixtures used in the
production of quality concrete including normal, other mid-
Packaging: range and high-range water-reducing admixtures, air
ADDMIX 700 is supplied in 1 kg 5 kg, 20 kg, & 240 kg entertainers, accelerators, retarders, extended set control
packing. admixtures, corrosion inhibitors, and shrinkage reducers.
ADDMIX 700 is also compatible with slag and pozzolans
Standards: such as fly ash and silica fume.
 ASTM C494: Types A & D
 IS 9103: 1999 Corrosivity – Non Corrosivity:
 IS:2645-2003 ADDMIX 700 admixture will neither initiate nor promote
corrosion of reinforcing steel embedded in concrete,
Typical Properties: prestressed concrete or concrete placed on galvanized steel
Appearance Dark Brown free flowing floor and roof systems. Neither calcium chloride nor any
liquid calcium chloride-based ingredients are used in the
manufacture of ADDMIX 700 admixture.
Specific Gravity 1.14 ± 0.03 at 25°C
pH 7 to 9 Workability:
Chloride ion content < 0.2% ADDMIX 700 ensures that concrete remains workable in
excess of 60 minutes at +25°C. Workability loss is dependent
Dosage: on temperature, and on the type of cement, the nature of
As a guide, a dosage range of 100 ml to 200 ml per 50kg aggregates, the method of transport and initial workability.
bag of cement/cementitious material is recommended.

SP CONCARE PVT. LTD.

CS No. 1471, DB House 1st Floor,
Madhavnagar Road, Near Auto India,
[email protected] www.spconcare.com Sangli-416416, Maharashtra, (INDIA)
 Last update on: 31-05-2024
Version: 4
It is strongly recommended that concrete should be properly
cured particularly in hot, windy and dry climates.

Storage and Shelf life All:

ADDMIX 700 must be stored where temperatures do not
drop below +5°C. If product has frozen, thaw at +5°C or
above and completely reconstitute using mild mechanical
agitation. Store under cover, out of direct sunlight and
protect from extremes of temperature. Shelf life is 12
months when stored as above.

Safety precautions:
As with all chemical products, care should be taken during
use and storage to avoid contact with eyes, mouth, skin, and
foodstuffs (which can also be tainted with vapor until product
fully cured or dried). Treat splashes to eyes and skin
immediately. If accidentally ingested, seek immediate
medical attention. Keep away from children and animals.
Reseal containers after use. Do not reuse containers for
storage of consumable item.
Disclaimer:
Whilst any information contained herein is true, accurate
and represents our best knowledge and experience, no
warranty is given or implied with any recommendations
made by us, our representatives or distributors, as the
conditions of use and the competence of any labour
involved in the application are beyond our control.

SP CONCARE PVT. LTD.

CS No. 1471, DB House 1st Floor,
Madhavnagar Road, Near Auto India,
[email protected] www.spconcare.com Sangli-416416, Maharashtra, (INDIA)