Scribd
Upload
28 views2 pages

TD 32d 2pg BW Apr2023

Uploaded by

muaadh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

TD 32d 2pg BW Apr2023

Uploaded by

muaadh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TYPE 32D

DRY RUNNING SINGLE SEAL


Technical Specification

A – Seat/Mating Ring
B – Face/Primary Ring
C – Retainer
D – Wear Indication
E – Optional C
(DIN) Flange

Pr o d u c t D e s cription Performance Capabilities*


Type 32 D vessel seals are outside-mounted balanced single seals • Temperature: -40°C to 150°C
with self-lubricating seal faces. Neither external cooling, lubrication • Operating pressure: vacuum up to 6 bar(g)
equipment or a supply system is required. The design and material • Static test pressure: up to 9 bar(g)
selection meets the needs of the pharmaceutical and chemical • Speed: up to 1000 rpm
processing industries and they are excellent for low duty mixing (depending on shaft diameter and pressure)
applications and operation in vacuum conditions. • Shaft Runout: radial: 1.5 mm
The seal can be supplied in component form consisting of spring- axial: +/- 1.5 mm
loaded face, driver retainer, and mating ring, or pre-assembled on
a flange. The flange version can be equipped with a debris well, *Maximum values (dependant on combination of operating conditions).
enabling it to capture face wear particles, preventing the For details see chart operating limits below. For operating conditions outside
contamination of process fluid. Standard flange designs are these limits consult John Crane.
available with dimensions to DIN 28138 Parts 1 and 3. Customized
flanges available on request. Speed [rpm]

De s i g n F e a t u res 1000
-0.5
up t
• Single O-ring mixer seal for top entry vessels o 0.
800 5 ba
r(g)
• Outside mounted dual balanced face
600 Vacuu
• Face material of special dry running carbon m up to
3 bar(
g)
• Reverse pressure design (high pressure and vacuum) 400
Vacuum
up to 6 ba
• T-Bars for rugged drive and exact axial guidance r(g )*
200
• Standard sizes from 25 to 125 mm shaft diameter

• Mechanical wear indication 0


0 30 40 50 60 70 80 90 100 120 125 160
• Suitable for application in explosive areas. Certificates of con- *Shaft Diameter 125 mm to 5 bar, 140 to 160 mm to 3 bar Shaft Diameter [mm]
formity according to European Directive 2014/34/EU (ATEX) (For other pressures, please consult John Crane)
Cat. 1, 2 and 3 available on request
• Standard design options:
– component seal
– component seal with standard flange (according to DIN)
– component seal with flange and debris well
TYPE 32D
DRY RUNNING SINGLE SEAL
Technical Specification

Ty p e 3 2 D Ty pical Arrangement/Dimensional Data (mm)

Seal Component Version Dimensions Standard Flange Dimensions (DIN) Flange Fastening & Mounting
Size
d3 D5 D6 D7 D8 L4 L5 L6 L7 d0 d1 d4 D9 H H11 H14 k n x d2 bolt T
25 50.5 56 63 79 13 3 5 9 91 175 110 114.5 85.4 25 14 145 4 x 18 M16 M16
30 50.5 56 63 79 13 3 5 9 91 175 110 114 85.4 25 14 145 4 x 18 M16 M16
40 59 65 73 89 13.5 3 5.5 9 91 175 110 175 85.4 32.5 14 145 4 x 18 M16 M16
50 69 75 83 98.5 13.5 3 5.5 9 107 240 176 135 85.4 25 14 210 8 x 18 M16 M16
60 77 83 92 108 14.5 3 6.5 10 120 240 176 145 85.4 25 12 210 8 x 18 M16 M16
70 95 100 110 120 15 3 7 9 156 275 204 160 85.4 25 12 240 8 x 22 M20 M20
80 104 110 120 130 15 3 7 9 149 275 204 165 85.4 25 12 240 8 x 22 M20 M20
90 109 115 125 140 15 3 7 9 149 275 204 175 85.4 25 12 240 8 x 22 M20 M20
100 123 131 140 149 14.5 3 6.5 10 174 305 234 185 85.4 25 12 270 8 x 22 M20 M20
110 133.5 141.5 150.5 159 14.5 3 6.5 9.5 174 305 234 195 85.4 25 12 270 8 x 22 M20 M20
125 152 160 169 175 14.5 3 6.5 10.5 199 330 260 210 85.4 25 12 295 8 x 22 M20 M20
Flange dimensions in accordance to DIN 28138. Special dimensions and designs on request.

North America Europe Latin America Middle East & Africa Asia Pacific
United States of America United Kingdom Brazil United Arab Emirates Singapore
Tel: 1-847-967-2400 Tel: 44-1753-224000 Tel: 55-11-3371-2500 Tel: 971-481-27800 Tel: 65-6518-1800
Fax: 1-847-967-3915 Fax: 44-1753-224224 Fax: 55-11-3371-2599 Fax: 971-488-62830 Fax: 65-6518-1803

If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to
their selection and use. In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without
prior notice. It is dangerous to smoke while handling products made from PTFE. Old and new PTFE products must not be incinerated. ISO 9001 and
ISO14001 Certified, details available on request.
©2015 John Crane Revised 04/23 www.johncrane.com TD-32D

You might also like