Scribd
Upload
13 views

DDJ-RX Firmware Update Guide E

Uploaded by

Roberth Castrillon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views

DDJ-RX Firmware Update Guide E

Uploaded by

Roberth Castrillon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DJ CONTROLLER

DDJ-RX

http://pioneerdj.com/support/
The Pioneer DJ site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.

Firmware Update Guide 0


Read Before Use <Important> How to check the Firmware
■Unzip the downloaded update file for updating.
Version
■If Java has not been installed, please download the Java Runtime
========================================
Environment (JRE) at: https://java.com and install it on your
computer. If you use the Edge browser in Windows 10, even if “In For Windows 7
Windows 10, the Edge browser does not support plug-ins and Click [All Programs] > [Pioneer] > [DDJ_RX] > [DDJ_RX Version
therefore will not run Java. Switch to a different browser” Display Utility] from the Windows [Start] menu.
messages are shown in the download page, click [Agree and Start
Free Download] button to go forward with download. For Windows 8 / 8.1
■ASIO driver exclusively for DDJ-RX is required to be installed for From [Apps view], click [Pioneer] > [DDJ_RX Version Display Utility].
Windows PC users.
■If you should have any questions, please contact the Pioneer For Windows 10
Customer Support Center. Click [All apps] > [Pioneer] > [DDJ_RX Version Display Utility] after left
clicking the Windows start button.
Reference Information
This updater has been verified to operate on the operating systems
below;
・Windows® 7/ Windows® 8/ Windows® 8.1/ Windows® 10
・Mac OS X : 10.8/ 10.9/ 10.10

Updating Procedures
Note: Turn the power off and disconnect all the cables from the
unit. And close all applications on your computer before running
this updating procedure.
1) Connect your computer to DDJ-RX via the USB cable included
with the product.
2) Turn on the power of DDJ-RX while pressing the [SHIFT] button
and the [SYNC] button on the LEFT deck, and ensure the Master
Level meter LEDs flash before releasing your finger from the these
buttons.

========================================
For Mac OS X
Open the Apple menu while pressing the option key, then select
“System Profiler” or “System Information.”

3) After waiting for about 10 seconds when the update file for
DDJ-RX (DDJ-RX_Vxxx.jar) is activated, the following dialogue is
displayed. Click the [Start] button.
■If an error message is displayed, click the [Close] button to close
the updater program and then activate the update file again.
■Approximately a few minutes are required for updating.

4) When the firmware update process is complete, click the [OK]


button.

Note: Please note that if you fail to update, turn on the power of
DDJ-RX again and start from Step 2) of the above Updating
Procedures.

1
Select the [USB] from the [Hardware] to display the name of the
controller. Select the controller to display the firmware version.

About Trademarks and Registered


Trademarks
・ Pioneer DJ is a trademark of PIONEER CORPORATION, and is used under
license.
・ Oracle and JAVA are registered trademarks of Oracle and/or its affiliates in the
United States and other countries.
・ Windows® is either registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
・ Mac OS is trademarks of Apple Inc. registered in the United State and other
countries.
© 2015 Pioneer DJ Corporation.
All rights reserved.
Pioneer DJ Corporation

You might also like