Scribd
Upload
125 views

CCNA Dis3 - Chapter 2 - Exploring The Enterprise Network Infrastructure - PPT (Compatibility Mode)

The document discusses the key components of an enterprise network infrastructure including the network operations center (NOC), point-of-presence (POP), edge security, access and distribution layers, and router and switch hardware and configuration. Diagrams are used to document the physical and logical topology of the network and the NOC allows for centralized management and monitoring of network resources.

Uploaded by

http://heiserz.com/
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
125 views

CCNA Dis3 - Chapter 2 - Exploring The Enterprise Network Infrastructure - PPT (Compatibility Mode)

The document discusses the key components of an enterprise network infrastructure including the network operations center (NOC), point-of-presence (POP), edge security, access and distribution layers, and router and switch hardware and configuration. Diagrams are used to document the physical and logical topology of the network and the NOC allows for centralized management and monitoring of network resources.

Uploaded by

http://heiserz.com/
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 43

Chapter 2 Exploring the Enterprise Network Infrastructure

CCNA Discovery 4.0

Intruduction

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Intruduction

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Intruduction

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Intruduction

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Objectives
Interpret network documentation.

Describe the equipment in the enterprise Network Operations Center. Describe the Point-of-Presence for Service delivery. Indentify security considerations and equipment at the enterprise edge. Identify router and switch hardware characteristics and use router CLI configuration and verification commands
Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Describing the current network

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Enterprise Network Documentation

A physical topology map uses icons to document the location of hosts, networking devices, and media.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Enterprise Network Documentation

A logical topology map groups hosts by network usage, regardless of physical location.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Enterprise Network Documentation



As the network grows or changes however, the documentation is not always updated. Blueprints can be marked up, or redlined, to show the changes. The modified diagram is known as an as-built

An as-built diagram documents how a network was actually constructed which may differ from the original plans.
Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Enterprise Network Documentation

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Enterprise Network Documentation

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Network Operations Center (NOC)



Most enterprise networks have a Network Operations Center (NOC) that allows for central management and monitoring of all network resources. NOC is sometimes referred to as a Data Center

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Network Operations Center (NOC)



NOCs also provide centralized resources such as servers and data storage. Servers in the NOC are usually clustered together, creating a server farm. The Server Farm is a single resource but, in fact, provides two functions: Backup. Load Balancing. The servers in the farm may be rack-mounted and interconnected by very high-speed switches (Gigabit Ethernet or higher).
Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Network Operations Center (NOC)



Data Storage or Network Attached Storage (NAS) Groups large numbers of disk drives that are directly attached to the network and can be used by any server. A NAS device is typically attached to an Ethernet network and is assigned its own IP address. A more sophisticated version of NAS is Storage Area Network (SAN). A SAN is a high-speed network that interconnects different types of data storage devices over a LAN or WAN.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Network Operations Center (NOC)



Equipment in the enterprise NOC is usually mounted in racks. In large NOCs, racks are usually floor-to-ceiling mounted and may be attached to each other. The most common rack width is 19 inches (48.26 cm). The vertical space that the equipment occupies is measured in Rack Units (RUs). A Unit equals 1.75 inches (4.4cm). For example, a 2U chassis is 3.5 inches (8.9 cm) high.
Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Network Operations Center (NOC)



In an enterprise NOC, thousands of cables may enter and exit the facility. Structured cabling creates an organized cabling system that is easily understood by installers, network administrators, and any other technicians who work with cables.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Telecommunication Room Design and Considerations



In practice, however, most users connect to a switch in a telecommunications room, which is some distance from the NOC. The telecommunications room is also referred to as a wiring closet or intermediate distribution facility (IDF).

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Telecommunication Room Design and Considerations



Many IDFs connect to a Main Distribution Facility (MDF) using an extended star design. The MDF is usually located in the NOC or centrally located within the building.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Telecommunication Room Design and Considerations

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Telecommunication Room Design and Considerations

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Supporting the Enterprise Edge

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Service Provider at the Point-of-Presence



At the outer edge of the enterprise network is the Pointof-Presence, or POP, which provides an entry point for services to the enterprise network. Externally-provided services coming in through the POP include Internet access, wide area connections, and telephone services (PSTN).

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Security Considerations at the Enterprise Edge



The edge is the point of entry for outside attacks and is a point of vulnerability For example, Denial of Service (DoS) attacks. An organization can deploy a firewall , and security appliances with intrusion detection system (IDS) and intrusion prevention system (IPS) at the edge to protect the network.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Connecting the Enterprise Network to External Services

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Connecting the Enterprise Network to External Services

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Revieving Routing and Switching

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Router Hardware

One important device in the Distribution Layer of an enterprise network is a router. All hosts on a local network specify the IP address of the local router interface in their IP configuration. This router interface is the default gateway.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Router Hardware

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Router Hardware

Two methods exist for connecting a PC to a network device for configuration and monitoring tasks: out-ofband and in-band management. Out-of-band management is used for initial configuration or when a network connection is unavailable. Configuration using out-of-band management requires: Direct connection to console or AUX port Terminal emulation client

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Router Hardware

In-band management is used to monitor and make configuration changes to a network device over a network connection. Configuration using in-band management requires: At least one network interface on the device to be connected and operational Telnet, SSH, or HTTP to access a Cisco device

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Router CLI Show commands

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Router CLI Show commands

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Router CLI Show commands

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Router Configuration Using CLI

Configuration Management: enable configure terminal copy running-config startup-config erase startup-config reload Global Settings: hostname banner motd enable password enable secret

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Router Configuration Using CLI

Line Settings: line con line aux line vty login and password Interface Settings: interface type/number description ip address no shutdown clock rate encapsulation

Routing Settings: qrouter qnetwork qip route

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Switch Hardware

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Switch Hardware

Port density on a switch is an important factor.

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Switch CLI Commands

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Switch CLI Commands

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Basic Switch CLI Commands

Configuration Management: Line Settings: enable Line con configure terminal line vty copy running-config login and password startup-config erase startup-config Interface Settings: delete vlan.dat ip addressInterface Reload type/number (vlan1) Global Settings: ip default gateway hostname speed / duplex banner motd switchport port-security enable password enable secret ngh thng tin Bach Khoa - Website: www.bkacad.com Hc vin cng

Summary

Network infrastructure diagrams document devices in a network. NOC. POP. The Enterprise Edge. Access Layer. Distribution Layer. Router and Switch

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

Hc vin cng ngh thng tin Bach Khoa - Website: www.bkacad.com

You might also like