Scribd
Upload
57 views10 pages

The APP Setup Process of AC EV Charger

Uploaded by

dowson972
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views10 pages

The APP Setup Process of AC EV Charger

Uploaded by

dowson972
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

The APP Setup Process of EV Charger

Nov.2,2023

Add the charger：


1、Enter the "Add the Charge" page and click the [+] icon, and the APP will scan the nearby EV chargers through
Bluetooth to display the list of EV chargers (note: please make sure that the Bluetooth of the mobile phone is on);

2、After the Bluetooth is connected successfully and enter list of EV charger, find the EV charger you want to use
and enter the password
3、After the password verification, please select whether connect WIFI network on the pop-up window. If click the
"Cancel" button, it will be Bluetooth connection; If click "OK", it will go to WIFI connection page.

4、On the WIFI connection page, please select the corresponding WIFI SSID
Note: The EV charger can be controlled by APP under the same WIFI.
5、Enter the WIFI password

6、Connect the EV charger


6、Once WIFI is connected successfully, it will go to the ready page for charging showing ‘Please plug in’

Ready to Charge：
1、After plug in the connector,the status will changed to ‘Ready’. You can click "Current" to set the charging
current before charging
2、Then, click ‘Start’ to charge

3、Click ‘Stop’ to finish charging


4、After stop or complete charging, you can plug off the connector, and the status of EV charger will be ‘Ready’ to
charge, or click ‘Charger option’ to use the other EV charger.You can keep the connector is plugged in and click
‘Continue’ to charge.

】
Reserve to charge：
1、After plug in the connector and go to ‘ready’ page, click "Reserve" to the charging reservation page
2、Set the start time and the end time, the maximum current, click "OK" to complete the
reservation, and when you cannot make it, you can view the notice above.

3、After reserve successfully, the reserved date and time will be displayed on Reservation page.
You can cancel the reservation beforehand.
Charging interface introduction
1. EV charger name (Serial Number as ）；
2. More Settings
1) Connector switch under dual-port charger ；
2) Charging Status；
3) Charging status
4) Blue: free state
5) Green: ready to charge/ Charge complete
6) Flashing Green: charging
7) Orange: charging reservation
8) Red: fault
3. “Start' button
1) Current：Current Setting
2) Reserve：Charging reservation
3) Charger Option：Chargers Switch
4) Real-time charging data
“More Settings” Page Instruction
1) Check charging records ;
2) The electronic lock. When the switch is off, the electronic lock will automatically lock;
3) Plug & charge mode is on ;
4) Load Balanced Settings :You can enter the setting value of load balancing, which refers to the setting
manual.
5) 5. firmware upgrade: Enter the corresponding firmware version to update EV charger
“Device” page instruction
Slide right on the page to enter the device details page
1. Display EV charger information:
1) Device name
2) Serial number,
3) Device software version
4) Device hardware version
5) Single port or dual-port.
2. Display usage history
3. Display Setting details

You might also like