Scribd
Upload
8 views6 pages

How To Change The - Press-To-Talk - Destination On Intercoms

Uploaded by

lamddns001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views6 pages

How To Change The - Press-To-Talk - Destination On Intercoms

Uploaded by

lamddns001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

ZYCOO Network Devices

www.zycoo.com
Contents
1. Overview ............................................................................................1
2. Steps ..................................................................................................2
How to Change the 'Press-to-Talk' Destination on Intercoms

1. Overview
This manual is intended to provide clear operating instructions for those who will configure
and manage ZYCOO devices. By carefully reading and consulting this guide, users could
solve the specific setting and deployment issues.

Note: ZYCOO is not responsible for any impact this configuration may have on your system.
If the modification fails or you encounter unexpected results, you may need to restore the
settings to default.

1
How to Change the 'Press-to-Talk' Destination on Intercoms

2. Steps
Step 1：
Open your web browser and enter the Ei intercom’s IP address into the address bar to access
the management page. Log in with your credentials.

Use the default credentials to log in:


 Username: admin
 Password: admin

Step 2:
Navigate to the Advanced menu and select I/O Settings.

2
How to Change the 'Press-to-Talk' Destination on Intercoms

Step 3:
Under the Key Settings section, click Key Action dropdown list and select Outgoing Call.
Then configure the remote side’s SIP account ID such as 1001 and set the calling line.
If you want to press the button again to end the call, you can enable the option below.

By following these steps, you will successfully change the “Press-to-Talk” destination on
your Zycoo intercom.

3
How to Change the 'Press-to-Talk' Destination on Intercoms

You might also like